[PATCH] trivial: fix typo lenght -> length

* [PATCH] trivial: fix typo lenght -> length
@ 2019-09-17 10:29 Uwe Kleine-König
  2019-09-18 12:41 ` Sascha Hauer
  0 siblings, 1 reply; 2+ messages in thread
From: Uwe Kleine-König @ 2019-09-17 10:29 UTC (permalink / raw)
  To: barebox

Generated by

	perl -p -i -e 's/lenghte?/length/' arch/arm/boards/chumby_falconwing/falconwing.c arch/arm/mach-samsung/mem-s3c64xx.c fs/ext4/ext_common.h lib/gui/lodepng.c include/jtag.h

There is another instance in dts/Bindings/usb/s3c2410-usb.txt, this is
fixed in Linux v5.3-rc1 so supposed to be fixed soon in barebox, too.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
---
This applies on top of my earlier patch "Convert latin1 files to utf-8".

 arch/arm/boards/chumby_falconwing/falconwing.c |  2 +-
 arch/arm/mach-samsung/mem-s3c64xx.c            |  2 +-
 fs/ext4/ext_common.h                           |  2 +-
 include/jtag.h                                 |  2 +-
 lib/gui/lodepng.c                              | 16 ++++++++--------
 5 files changed, 12 insertions(+), 12 deletions(-)

diff --git a/arch/arm/boards/chumby_falconwing/falconwing.c b/arch/arm/boards/chumby_falconwing/falconwing.c
index 42dd838d758e..fb4a5d1cf036 100644
--- a/arch/arm/boards/chumby_falconwing/falconwing.c
+++ b/arch/arm/boards/chumby_falconwing/falconwing.c
@@ -65,7 +65,7 @@ static struct fb_videomode falconwing_vmode = {
 	.xres = 320,
 	.yres = 240,
 	.pixclock = KHZ2PICOS(6250),    /* max. 10 MHz */
-	/* line lenght should be 64 µs */
+	/* line length should be 64 µs */
 	.left_margin = 28,
 	.hsync_len = 24,
 	.right_margin = 28,
diff --git a/arch/arm/mach-samsung/mem-s3c64xx.c b/arch/arm/mach-samsung/mem-s3c64xx.c
index aca2cf506688..c51245a378e7 100644
--- a/arch/arm/mach-samsung/mem-s3c64xx.c
+++ b/arch/arm/mach-samsung/mem-s3c64xx.c
@@ -39,7 +39,7 @@ int s3c6410_setup_chipselect(int no, const struct s3c6410_chipselect *c)
 	tacs = DIV_ROUND_UP(c->adr_setup_t, per_t);
 	/* start of CS to read/write assertion (= access setup) */
 	tcos = DIV_ROUND_UP(c->access_setup_t, per_t);
-	/* length of read/write assertion (= access lenght) */
+	/* length of read/write assertion (= access length) */
 	tacc = DIV_ROUND_UP(c->access_t, per_t) - 1;
 	/* CS hold after access is finished */
 	tcoh = DIV_ROUND_UP(c->cs_hold_t, per_t);
diff --git a/fs/ext4/ext_common.h b/fs/ext4/ext_common.h
index c084cf9a32d1..a28f591bc441 100644
--- a/fs/ext4/ext_common.h
+++ b/fs/ext4/ext_common.h
@@ -37,7 +37,7 @@
 
 /* Amount of indirect blocks in an inode.  */
 #define INDIRECT_BLOCKS			12
-/* Maximum lenght of a pathname.  */
+/* Maximum length of a pathname.  */
 #define EXT2_PATH_MAX				4096
 /* Maximum nesting of symlinks, used to prevent a loop.  */
 #define	EXT2_MAX_SYMLINKCNT		8
diff --git a/include/jtag.h b/include/jtag.h
index 26c95fb3077c..4cc4eaca9182 100644
--- a/include/jtag.h
+++ b/include/jtag.h
@@ -28,7 +28,7 @@
  * (repeat for each chip in the chain)
  * - ioctl JTAG_GET_ID identifies the chip
  * - ioctl JTAG_SET_IR_LENGTH sets the instruction register length
- * Before accessing the data registers, instruction registers' lenghtes
+ * Before accessing the data registers, instruction registers' lengths
  *  MUST be programmed for all chips.
  * After this initialization, you can execute JTAG_IR_WR, JTAG_DR_RD, JTAG_DR_WR
  *  commands in any sequence.
diff --git a/lib/gui/lodepng.c b/lib/gui/lodepng.c
index 78a34db47345..82fa90ab23a8 100644
--- a/lib/gui/lodepng.c
+++ b/lib/gui/lodepng.c
@@ -822,7 +822,7 @@ unsigned lodepng_huffman_code_lengths(unsigned* lengths, const unsigned* frequen
 
     if(!error)
     {
-      /*calculate the lenghts of each symbol, as the amount of times a coin of each symbol is used*/
+      /*calculate the lengths of each symbol, as the amount of times a coin of each symbol is used*/
       for(i = 0; i < numpresent - 1; i++)
       {
         Coin* coin = &coins[i];
@@ -1678,7 +1678,7 @@ static unsigned deflateDynamic(ucvector* out, size_t* bp, Hash* hash,
   another huffman tree is used for the dist values ("d"). These two trees are
   stored using their code lengths, and to compress even more these code lengths
   are also run-length encoded and huffman compressed. This gives a huffman tree
-  of code lengths "cl". The code lenghts used to describe this third tree are
+  of code lengths "cl". The code lengths used to describe this third tree are
   the code length code lengths ("clcl").
   */
 
@@ -1690,7 +1690,7 @@ static unsigned deflateDynamic(ucvector* out, size_t* bp, Hash* hash,
   uivector frequencies_ll; /*frequency of lit,len codes*/
   uivector frequencies_d; /*frequency of dist codes*/
   uivector frequencies_cl; /*frequency of code length codes*/
-  uivector bitlen_lld; /*lit,len,dist code lenghts (int bits), literally (without repeat codes).*/
+  uivector bitlen_lld; /*lit,len,dist code lengths (int bits), literally (without repeat codes).*/
   uivector bitlen_lld_e; /*bitlen_lld encoded with repeat codes (this is a rudemtary run length compression)*/
   /*bitlen_cl is the code length code lengths ("clcl"). The bit lengths of codes to represent tree_cl
   (these are written as is in the file, it would be crazy to compress these using yet another huffman
@@ -1828,7 +1828,7 @@ static unsigned deflateDynamic(ucvector* out, size_t* bp, Hash* hash,
     if(!uivector_resize(&bitlen_cl, NUM_CODE_LENGTH_CODES)) ERROR_BREAK(83 /*alloc fail*/);
     for(i = 0; i < NUM_CODE_LENGTH_CODES; i++)
     {
-      /*lenghts of code length tree is in the order as specified by deflate*/
+      /*lengths of code length tree is in the order as specified by deflate*/
       bitlen_cl.data[i] = HuffmanTree_getLength(&tree_cl, CLCL_ORDER[i]);
     }
     while(bitlen_cl.data[bitlen_cl.size - 1] == 0 && bitlen_cl.size > 4)
@@ -1844,7 +1844,7 @@ static unsigned deflateDynamic(ucvector* out, size_t* bp, Hash* hash,
     After the BFINAL and BTYPE, the dynamic block consists out of the following:
     - 5 bits HLIT, 5 bits HDIST, 4 bits HCLEN
     - (HCLEN+4)*3 bits code lengths of code length alphabet
-    - HLIT + 257 code lenghts of lit/length alphabet (encoded using the code length
+    - HLIT + 257 code lengths of lit/length alphabet (encoded using the code length
       alphabet, + possible repetition codes 16, 17, 18)
     - HDIST + 1 code lengths of distance alphabet (encoded using the code length
       alphabet, + possible repetition codes 16, 17, 18)
@@ -1865,10 +1865,10 @@ static unsigned deflateDynamic(ucvector* out, size_t* bp, Hash* hash,
     addBitsToStream(bp, out, HDIST, 5);
     addBitsToStream(bp, out, HCLEN, 4);
 
-    /*write the code lenghts of the code length alphabet*/
+    /*write the code lengths of the code length alphabet*/
     for(i = 0; i < HCLEN + 4; i++) addBitsToStream(bp, out, bitlen_cl.data[i], 3);
 
-    /*write the lenghts of the lit/len AND the dist alphabet*/
+    /*write the lengths of the lit/len AND the dist alphabet*/
     for(i = 0; i < bitlen_lld_e.size; i++)
     {
       addHuffmanSymbol(bp, out, HuffmanTree_getCode(&tree_cl, bitlen_lld_e.data[i]),
@@ -5608,7 +5608,7 @@ const char* lodepng_error_text(unsigned code)
 
     /*jumped past tree while generating huffman tree, this could be when the
     tree will have more leaves than symbols after generating it out of the
-    given lenghts. They call this an oversubscribed dynamic bit lengths tree in zlib.*/
+    given lengths. They call this an oversubscribed dynamic bit lengths tree in zlib.*/
     case 55: return "jumped past tree while generating huffman tree";
 
     case 56: return "given output image colortype or bitdepth not supported for color conversion";
-- 
2.23.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 2+ messages in thread