mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Lucas Stach <dev@lynxeye.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 06/18] ARM: zynq: zedboard: provide DTB
Date: Sat,  9 Nov 2019 15:28:25 +0100	[thread overview]
Message-ID: <20191109142837.82409-6-dev@lynxeye.de> (raw)
In-Reply-To: <20191109142837.82409-1-dev@lynxeye.de>

Provide the DTB to allow devices to be probed from there,
instead of board code.

Signed-off-by: Lucas Stach <dev@lynxeye.de>
---
 arch/arm/boards/avnet-zedboard/lowlevel.c | 8 +++++++-
 arch/arm/dts/Makefile                     | 1 +
 arch/arm/dts/zynq-zed.dts                 | 7 +++++++
 3 files changed, 15 insertions(+), 1 deletion(-)
 create mode 100644 arch/arm/dts/zynq-zed.dts

diff --git a/arch/arm/boards/avnet-zedboard/lowlevel.c b/arch/arm/boards/avnet-zedboard/lowlevel.c
index cf3c4ebd0c7e..ae279e4e64af 100644
--- a/arch/arm/boards/avnet-zedboard/lowlevel.c
+++ b/arch/arm/boards/avnet-zedboard/lowlevel.c
@@ -27,8 +27,13 @@
 #define PLL_DDR_LOCK	(1 << 1)
 #define PLL_IO_LOCK	(1 << 2)
 
+extern char __dtb_zynq_zed_start[];
+
 void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
 {
+
+	void *fdt = __dtb_zynq_zed_start + get_runtime_offset();
+
 	/* open sesame */
 	writel(0x0000DF0D, ZYNQ_SLCR_UNLOCK);
 
@@ -257,5 +262,6 @@ void __naked barebox_arm_reset_vector(uint32_t r0, uint32_t r1, uint32_t r2)
 	writel(0x0000767B, ZYNQ_SLCR_LOCK);
 
 	arm_cpu_lowlevel_init();
-	barebox_arm_entry(0, SZ_512M, NULL);
+
+	barebox_arm_entry(0, SZ_512M, fdt);
 }
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 294a0bfa5525..c097c10186a4 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -143,5 +143,6 @@ lwl-dtb-$(CONFIG_MACH_ZII_IMX7D_DEV) += imx7d-zii-rpu2.dtb.o imx7d-zii-rmu2.dtb.
 lwl-dtb-$(CONFIG_MACH_WAGO_PFC_AM35XX) += am35xx-pfc-750_820x.dtb.o
 lwl-dtb-$(CONFIG_MACH_LS1046ARDB) += fsl-ls1046a-rdb.dtb.o
 lwl-dtb-$(CONFIG_MACH_TQMLS1046A) += fsl-tqmls1046a-mbls10xxa.dtb.o
+lwl-dtb-$(CONFIG_MACH_ZEDBOARD) += zynq-zed.dtb.o
 
 clean-files := *.dtb *.dtb.S .*.dtc .*.pre .*.dts *.dtb.lzo
diff --git a/arch/arm/dts/zynq-zed.dts b/arch/arm/dts/zynq-zed.dts
new file mode 100644
index 000000000000..52d68332499a
--- /dev/null
+++ b/arch/arm/dts/zynq-zed.dts
@@ -0,0 +1,7 @@
+#include <arm/zynq-zed.dts>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+	};
+};
-- 
2.23.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2019-11-09 14:29 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2019-11-09 14:28 [PATCH v2 01/18] ARM: zynq: zedboard: enable MACB driver in defconfig Lucas Stach
2019-11-09 14:28 ` [PATCH v2 02/18] ARM: zynq: add trivial image build mechanism Lucas Stach
2019-11-09 14:28 ` [PATCH v2 03/18] ARM: zynq: use getopt in zynq_mkimage Lucas Stach
2019-11-09 14:28 ` [PATCH v2 04/18] ARM: zynq: move header generation to zynq_mkimage Lucas Stach
2019-11-09 14:28 ` [PATCH v2 05/18] ARM: zynq: add size check in zynq_mkimage Lucas Stach
2019-11-09 14:28 ` Lucas Stach [this message]
2019-11-09 14:28 ` [PATCH v2 07/18] net: macb: handle more clocks Lucas Stach
2019-11-09 14:28 ` [PATCH v2 08/18] net: macb: add Zynq compatible Lucas Stach
2019-11-09 14:28 ` [PATCH v2 09/18] ARM: zynq: move clock controller driver to drivers/clk Lucas Stach
2019-11-09 14:28 ` [PATCH v2 10/18] clk: zynq: use base address of clock controller Lucas Stach
2019-11-09 14:28 ` [PATCH v2 11/18] clk: zynq: improve PLL enable handling Lucas Stach
2019-11-09 14:28 ` [PATCH v2 12/18] clk: zynq: fix up address from DT Lucas Stach
2019-11-09 14:28 ` [PATCH v2 13/18] clk: zynq: partially sync with Linux Lucas Stach
2019-11-09 14:28 ` [PATCH v2 14/18] ARM: zynq: switch to DT based probing Lucas Stach
2019-11-09 14:28 ` [PATCH v2 15/18] clk: zynq: remove clkdevs Lucas Stach
2019-11-09 14:28 ` [PATCH v2 16/18] ARM: zynq: switch to multi-image build Lucas Stach
2019-11-09 14:28 ` [PATCH v2 17/18] bootsource: add JTAG bootsource Lucas Stach
2019-11-09 14:28 ` [PATCH v2 18/18] ARM: zynq: add bootsource detection Lucas Stach
2019-11-11  8:16 ` [PATCH v2 01/18] ARM: zynq: zedboard: enable MACB driver in defconfig Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20191109142837.82409-6-dev@lynxeye.de \
    --to=dev@lynxeye.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox