From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 4/6] net: fsl-fman: Store index for rxbd
Date: Thu, 14 Nov 2019 14:00:19 +0100 [thread overview]
Message-ID: <20191114130021.1029-5-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20191114130021.1029-1-s.hauer@pengutronix.de>
Like done for the txbd, also store the index of the current rxbd in the
driver private data. This makes the code easier to follow.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/net/fsl-fman.c | 21 +++++++++------------
1 file changed, 9 insertions(+), 12 deletions(-)
diff --git a/drivers/net/fsl-fman.c b/drivers/net/fsl-fman.c
index 5dc7ed5090..196be3f6bd 100644
--- a/drivers/net/fsl-fman.c
+++ b/drivers/net/fsl-fman.c
@@ -104,8 +104,8 @@ struct fm_eth {
struct device_d *dev;
struct fm_port_global_pram *rx_pram; /* Rx parameter table */
struct fm_port_global_pram *tx_pram; /* Tx parameter table */
- void *rx_bd_ring; /* Rx BD ring base */
- void *cur_rxbd; /* current Rx BD */
+ struct fm_port_bd *rx_bd_ring; /* Rx BD ring base */
+ int cur_rxbd_idx; /* current Rx BD index */
void *rx_buf; /* Rx buffer base */
struct fm_port_bd *tx_bd_ring; /* Tx BD ring base */
int cur_txbd_idx; /* current Tx BD index */
@@ -628,12 +628,13 @@ static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth)
/* save them to fm_eth */
fm_eth->rx_bd_ring = rx_bd_ring_base;
- fm_eth->cur_rxbd = rx_bd_ring_base;
+ fm_eth->cur_rxbd_idx = 0;
fm_eth->rx_buf = rx_buf_pool;
/* init Rx BDs ring */
- rxbd = rx_bd_ring_base;
for (i = 0; i < RX_BD_RING_SIZE; i++) {
+ rxbd = &fm_eth->rx_bd_ring[i];
+
muram_writew(&rxbd->status, RxBD_EMPTY);
muram_writew(&rxbd->len, 0);
buf_hi = upper_32_bits(virt_to_phys(rx_buf_pool +
@@ -644,7 +645,6 @@ static int fm_eth_rx_port_parameter_init(struct fm_eth *fm_eth)
MAX_RXBUF_LEN, DMA_FROM_DEVICE);
muram_writew(&rxbd->buf_ptr_hi, (u16)buf_hi);
out_be32(&rxbd->buf_ptr_lo, buf_lo);
- rxbd++;
}
/* set the Rx queue descriptor */
@@ -891,7 +891,7 @@ static int fm_eth_recv(struct eth_device *edev)
{
struct fm_eth *fm_eth = to_fm_eth(edev);
struct fm_port_global_pram *pram;
- struct fm_port_bd *rxbd, *rxbd_base;
+ struct fm_port_bd *rxbd;
u16 status, len;
u32 buf_lo, buf_hi;
u8 *data;
@@ -899,9 +899,10 @@ static int fm_eth_recv(struct eth_device *edev)
int ret = 1;
pram = fm_eth->rx_pram;
- rxbd = fm_eth->cur_rxbd;
while (1) {
+ rxbd = &fm_eth->rx_bd_ring[fm_eth->cur_rxbd_idx];
+
status = muram_readw(&rxbd->status);
if (status & RxBD_EMPTY)
break;
@@ -931,10 +932,7 @@ static int fm_eth_recv(struct eth_device *edev)
muram_writew(&rxbd->len, 0);
/* advance RxBD */
- rxbd++;
- rxbd_base = fm_eth->rx_bd_ring;
- if (rxbd >= (rxbd_base + RX_BD_RING_SIZE))
- rxbd = rxbd_base;
+ fm_eth->cur_rxbd_idx = (fm_eth->cur_rxbd_idx + 1) % RX_BD_RING_SIZE;
/* update RxQD */
offset_out = muram_readw(&pram->rxqd.offset_out);
@@ -943,7 +941,6 @@ static int fm_eth_recv(struct eth_device *edev)
offset_out = 0;
muram_writew(&pram->rxqd.offset_out, offset_out);
}
- fm_eth->cur_rxbd = rxbd;
return ret;
}
--
2.24.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2019-11-14 13:00 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-14 13:00 [PATCH 0/6] fsl-fman patches Sascha Hauer
2019-11-14 13:00 ` [PATCH 1/6] net: fsl-fman: reset device before leaving Sascha Hauer
2019-11-14 13:23 ` Ahmad Fatoum
2019-11-14 14:36 ` Sascha Hauer
2019-11-14 13:00 ` [PATCH 2/6] net: fsl-fman: Store index for txbd Sascha Hauer
2019-11-14 13:00 ` [PATCH 3/6] net: fsl-fman: move status read into loop Sascha Hauer
2019-11-14 13:00 ` Sascha Hauer [this message]
2019-11-14 13:00 ` [PATCH 5/6] net: fsl-fman: simplify setting next offset Sascha Hauer
2019-11-14 13:00 ` [PATCH 6/6] net: fsl-fman: do not leave not transmitted DMA buffers mapped Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191114130021.1029-5-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox