* [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support
@ 2020-01-10 11:54 Sascha Hauer
2020-01-10 11:54 ` [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros Sascha Hauer
` (4 more replies)
0 siblings, 5 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-01-10 11:54 UTC (permalink / raw)
To: Barebox List
To make the IOMMU work under Linux we have to configure the different Isolation
Context Identifier registers in the SoC and communicate the settings to
Linux via "iommu" properties in the device tree. This adds the necessary
settings and device tree fixups ported from U-Boot.
Sascha
Sascha Hauer (5):
ARM: Layerscape: replace overcomplicated macros
include/soc/fsl: remove unused function prototypes
include/soc/fsl: Make struct ccsr_qman v3 specific
net: fsl-fman: Do not put hardware in reset before Linux start
ARM: Layerscape: setup icids for the IOMMU
arch/arm/mach-layerscape/icid.c | 611 ++++++++++++++++++++++++--------
drivers/net/fsl-fman.c | 8 -
include/soc/fsl/fsl_qbman.h | 18 +-
include/soc/fsl/immap_lsch2.h | 1 +
4 files changed, 465 insertions(+), 173 deletions(-)
--
2.25.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros
2020-01-10 11:54 [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support Sascha Hauer
@ 2020-01-10 11:54 ` Sascha Hauer
2020-01-10 11:54 ` [PATCH 2/5] include/soc/fsl: remove unused function prototypes Sascha Hauer
` (3 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-01-10 11:54 UTC (permalink / raw)
To: Barebox List
The icid tables are generated with several macros which makes the code
hard to read. Drop the macros.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-layerscape/icid.c | 342 +++++++++++++++++++-------------
1 file changed, 204 insertions(+), 138 deletions(-)
diff --git a/arch/arm/mach-layerscape/icid.c b/arch/arm/mach-layerscape/icid.c
index 2326d7e67a..340ca959ca 100644
--- a/arch/arm/mach-layerscape/icid.c
+++ b/arch/arm/mach-layerscape/icid.c
@@ -36,9 +36,6 @@
*
*/
-
-#define FSL_INVALID_STREAM_ID 0
-
/* legacy devices */
#define FSL_USB1_STREAM_ID 1
#define FSL_USB2_STREAM_ID 2
@@ -56,8 +53,8 @@
#define FSL_PEX_STREAM_ID_END 26
/* DPAA1 - Stream-ID that can be programmed in DPAA1 h/w */
-#define FSL_DPAA1_STREAM_ID_START 27
-#define FSL_DPAA1_STREAM_ID_END 63
+#define DPAA1_SID_START 27
+#define DPAA1_SID_END 63
struct icid_id_table {
const char *compat;
@@ -72,141 +69,210 @@ struct fman_icid_id_table {
u32 icid;
};
-#define SET_ICID_ENTRY(name, idA, regA, addr, compataddr) \
- { \
- .compat = name, \
- .id = idA, \
- .reg = regA, \
- .compat_addr = compataddr, \
- .reg_addr = addr, \
- }
-
-#define SET_SCFG_ICID(compat, streamid, name, compataddr) \
- SET_ICID_ENTRY(compat, streamid, (((streamid) << 24) | (1 << 23)), \
- offsetof(struct ccsr_scfg, name) + LSCH2_SCFG_ADDR, \
- compataddr)
-
-#define SET_USB_ICID(usb_num, compat, streamid) \
- SET_SCFG_ICID(compat, streamid, usb##usb_num##_icid,\
- LSCH2_XHCI_USB##usb_num##_ADDR)
-
-#define SET_SATA_ICID(compat, streamid) \
- SET_SCFG_ICID(compat, streamid, sata_icid,\
- LSCH2_HCI_BASE_ADDR)
-
-#define SET_SDHC_ICID(streamid) \
- SET_SCFG_ICID("fsl,esdhc", streamid, sdhc_icid,\
- LSCH2_ESDHC_ADDR)
-
-#define QMAN_CQSIDR_REG 0x20a80
-
-#define SET_QDMA_ICID(compat, streamid) \
- SET_ICID_ENTRY(compat, streamid, (1 << 31) | (streamid), \
- LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG, \
- LSCH2_QDMA_BASE_ADDR), \
- SET_ICID_ENTRY(NULL, streamid, (1 << 31) | (streamid), \
- LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4, \
- LSCH2_QDMA_BASE_ADDR)
-
-#define SET_EDMA_ICID(streamid) \
- SET_SCFG_ICID("fsl,vf610-edma", streamid, edma_icid,\
- LSCH2_EDMA_BASE_ADDR)
-
-#define SET_ETR_ICID(streamid) \
- SET_SCFG_ICID(NULL, streamid, etr_icid, 0)
-
-#define SET_DEBUG_ICID(streamid) \
- SET_SCFG_ICID(NULL, streamid, debug_icid, 0)
-
-#define SET_QE_ICID(streamid) \
- SET_SCFG_ICID("fsl,qe", streamid, qe_icid,\
- LSCH2_QE_BASE_ADDR)
-
-#define SET_QMAN_ICID(streamid) \
- SET_ICID_ENTRY("fsl,qman", streamid, streamid, \
- offsetof(struct ccsr_qman, liodnr) + \
- LSCH2_QMAN_ADDR, \
- LSCH2_QMAN_ADDR)
-
-#define SET_BMAN_ICID(streamid) \
- SET_ICID_ENTRY("fsl,bman", streamid, streamid, \
- offsetof(struct ccsr_bman, liodnr) + \
- LSCH2_BMAN_ADDR, \
- LSCH2_BMAN_ADDR)
-
-#define SET_FMAN_ICID_ENTRY(_port_id, streamid) \
- { .port_id = (_port_id), .icid = (streamid) }
-
-#define SET_SEC_QI_ICID(streamid) \
- SET_ICID_ENTRY("fsl,sec-v4.0", streamid, \
- 0, offsetof(ccsr_sec_t, qilcr_ls) + \
- LSCH2_SEC_ADDR, \
- LSCH2_SEC_ADDR)
-
-#define SET_SEC_JR_ICID_ENTRY(jr_num, streamid) \
- SET_ICID_ENTRY( \
- (CONFIG_ARMV8_SEC_FIRMWARE_SUPPORT && \
- (FSL_SEC_JR##jr_num##_OFFSET == \
- SEC_JR3_OFFSET + CONFIG_SYS_FSL_SEC_OFFSET) \
- ? NULL \
- : "fsl,sec-v4.0-job-ring"), \
- streamid, \
- (((streamid) << 16) | (streamid)), \
- offsetof(ccsr_sec_t, jrliodnr[jr_num].ls) + \
- LSCH2_SEC_ADDR, \
- FSL_SEC_JR##jr_num##_BASE_ADDR)
-
-#define SET_SEC_DECO_ICID_ENTRY(deco_num, streamid) \
- SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
- offsetof(ccsr_sec_t, decoliodnr[deco_num].ls) + \
- LSCH2_SEC_ADDR, 0)
-
-#define SET_SEC_RTIC_ICID_ENTRY(rtic_num, streamid) \
- SET_ICID_ENTRY(NULL, streamid, (((streamid) << 16) | (streamid)), \
- offsetof(ccsr_sec_t, rticliodnr[rtic_num].ls) + \
- LSCH2_SEC_ADDR, 0)
-
-static struct icid_id_table icid_tbl_ls1046a[] = {
- SET_QMAN_ICID(FSL_DPAA1_STREAM_ID_START),
- SET_BMAN_ICID(FSL_DPAA1_STREAM_ID_START + 1),
-
- SET_SDHC_ICID(FSL_SDHC_STREAM_ID),
-
- SET_USB_ICID(1, "snps,dwc3", FSL_USB1_STREAM_ID),
- SET_USB_ICID(2, "snps,dwc3", FSL_USB2_STREAM_ID),
- SET_USB_ICID(3, "snps,dwc3", FSL_USB3_STREAM_ID),
-
- SET_SATA_ICID("fsl,ls1046a-ahci", FSL_SATA_STREAM_ID),
- SET_QDMA_ICID("fsl,ls1046a-qdma", FSL_QDMA_STREAM_ID),
- SET_EDMA_ICID(FSL_EDMA_STREAM_ID),
- SET_ETR_ICID(FSL_ETR_STREAM_ID),
- SET_DEBUG_ICID(FSL_DEBUG_STREAM_ID),
+#define QMAN_CQSIDR_REG 0x20a80
+
+#define SEC_JRnICID_LS(n) ((0x10 + (n) * 0x8) + 0x4)
+#define SEC_RTICnICID_LS(n) ((0x60 + (n) * 0x8) + 0x4)
+#define SEC_DECOnICID_LS(n) ((0xa0 + (n) * 0x8) + 0x4)
+#define SEC_QIIC_LS 0x70024
+#define SEC_IRBAR_JRn(n) (0x10000 * ((n) + 1))
+
+struct icid_id_table icid_tbl_ls1046a[] = {
+ {
+ .compat = "fsl,qman",
+ .id = DPAA1_SID_START,
+ .reg = DPAA1_SID_START,
+ .compat_addr = LSCH2_QMAN_ADDR,
+ .reg_addr = offsetof(struct ccsr_qman, liodnr) + LSCH2_QMAN_ADDR,
+ }, {
+ .compat = "fsl,bman",
+ .id = DPAA1_SID_START + 1,
+ .reg = DPAA1_SID_START + 1,
+ .compat_addr = LSCH2_BMAN_ADDR,
+ .reg_addr = offsetof(struct ccsr_bman, liodnr) + LSCH2_BMAN_ADDR,
+ }, {
+ .compat = "fsl,esdhc",
+ .id = FSL_SDHC_STREAM_ID,
+ .reg = (((FSL_SDHC_STREAM_ID) << 24) | (1 << 23)),
+ .compat_addr = LSCH2_ESDHC_ADDR,
+ .reg_addr = offsetof(struct ccsr_scfg, sdhc_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .compat = "snps,dwc3",
+ .id = FSL_USB1_STREAM_ID,
+ .reg = (((FSL_USB1_STREAM_ID) << 24) | (1 << 23)),
+ .compat_addr = LSCH2_XHCI_USB1_ADDR,
+ .reg_addr = offsetof(struct ccsr_scfg, usb1_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .compat = "snps,dwc3",
+ .id = FSL_USB2_STREAM_ID,
+ .reg = (((FSL_USB2_STREAM_ID) << 24) | (1 << 23)),
+ .compat_addr = LSCH2_XHCI_USB2_ADDR,
+ .reg_addr = offsetof(struct ccsr_scfg, usb2_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .compat = "snps,dwc3",
+ .id = FSL_USB3_STREAM_ID,
+ .reg = (((FSL_USB3_STREAM_ID) << 24) | (1 << 23)),
+ .compat_addr = LSCH2_XHCI_USB3_ADDR,
+ .reg_addr = offsetof(struct ccsr_scfg, usb3_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .compat = "fsl,ls1046a-ahci",
+ .id = FSL_SATA_STREAM_ID,
+ .reg = (((FSL_SATA_STREAM_ID) << 24) | (1 << 23)),
+ .compat_addr = LSCH2_HCI_BASE_ADDR,
+ .reg_addr = offsetof(struct ccsr_scfg, sata_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .compat = "fsl,ls1046a-qdma",
+ .id = FSL_QDMA_STREAM_ID,
+ .reg = (1 << 31) | (FSL_QDMA_STREAM_ID),
+ .compat_addr = LSCH2_QDMA_BASE_ADDR,
+ .reg_addr = LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG,
+ }, {
+ .id = FSL_QDMA_STREAM_ID,
+ .reg = (1 << 31) | (FSL_QDMA_STREAM_ID),
+ .compat_addr = LSCH2_QDMA_BASE_ADDR,
+ .reg_addr = LSCH2_QDMA_BASE_ADDR + QMAN_CQSIDR_REG + 4,
+ }, {
+ .compat = "fsl,vf610-edma",
+ .id = FSL_EDMA_STREAM_ID,
+ .reg = (((FSL_EDMA_STREAM_ID) << 24) | (1 << 23)),
+ .compat_addr = LSCH2_EDMA_BASE_ADDR,
+ .reg_addr = offsetof(struct ccsr_scfg, edma_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .id = FSL_ETR_STREAM_ID,
+ .reg = (((FSL_ETR_STREAM_ID) << 24) | (1 << 23)),
+ .reg_addr = offsetof(struct ccsr_scfg, etr_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .id = FSL_DEBUG_STREAM_ID,
+ .reg = (((FSL_DEBUG_STREAM_ID) << 24) | (1 << 23)),
+ .reg_addr = offsetof(struct ccsr_scfg, debug_icid) + LSCH2_SCFG_ADDR,
+ }, {
+ .compat = "fsl,sec-v4.0",
+ .id = DPAA1_SID_END,
+ .compat_addr = LSCH2_SEC_ADDR,
+ .reg_addr = SEC_QIIC_LS + LSCH2_SEC_ADDR,
+ }, {
+ .compat = "fsl,sec-v4.0-job-ring",
+ .id = DPAA1_SID_START + 3,
+ .reg = (((DPAA1_SID_START + 3) << 16) | (DPAA1_SID_START + 3)),
+ .compat_addr = SEC_IRBAR_JRn(0),
+ .reg_addr = SEC_JRnICID_LS(0) + LSCH2_SEC_ADDR,
+ }, {
+ .compat = "fsl,sec-v4.0-job-ring",
+ .id = DPAA1_SID_START + 4,
+ .reg = (((DPAA1_SID_START + 4) << 16) | (DPAA1_SID_START + 4)),
+ .compat_addr = SEC_IRBAR_JRn(1),
+ .reg_addr = SEC_JRnICID_LS(1) + LSCH2_SEC_ADDR,
+ }, {
+ .compat = "fsl,sec-v4.0-job-ring",
+ .id = DPAA1_SID_START + 5,
+ .reg = (((DPAA1_SID_START + 5) << 16) | (DPAA1_SID_START + 5)),
+ .compat_addr = SEC_IRBAR_JRn(2),
+ .reg_addr = SEC_JRnICID_LS(2) + LSCH2_SEC_ADDR,
+ }, {
+ .compat = "fsl,sec-v4.0-job-ring",
+ .id = DPAA1_SID_START + 6,
+ .reg = (((DPAA1_SID_START + 6) << 16) | (DPAA1_SID_START + 6)),
+ .compat_addr = SEC_IRBAR_JRn(3),
+ .reg_addr = SEC_JRnICID_LS(3) + LSCH2_SEC_ADDR,
+ }, {
+ .id = DPAA1_SID_START + 7,
+ .reg = (((DPAA1_SID_START + 7) << 16) | (DPAA1_SID_START + 7)),
+ .reg_addr = SEC_RTICnICID_LS(0) + LSCH2_SEC_ADDR,
+ }, {
+ .id = DPAA1_SID_START + 8,
+ .reg = (((DPAA1_SID_START + 8) << 16) | (DPAA1_SID_START + 8)),
+ .reg_addr = SEC_RTICnICID_LS(1) + LSCH2_SEC_ADDR,
+ },{
+ .id = DPAA1_SID_START + 9,
+ .reg = (((DPAA1_SID_START + 9) << 16) | (DPAA1_SID_START + 9)),
+ .reg_addr = SEC_RTICnICID_LS(2) + LSCH2_SEC_ADDR,
+ }, {
+ .id = DPAA1_SID_START + 10,
+ .reg = (((DPAA1_SID_START + 10) << 16) | (DPAA1_SID_START + 10)),
+ .reg_addr = SEC_RTICnICID_LS(3) + LSCH2_SEC_ADDR,
+ }, {
+ .id = DPAA1_SID_START + 11,
+ .reg = (((DPAA1_SID_START + 11) << 16) | (DPAA1_SID_START + 11)),
+ .reg_addr = SEC_DECOnICID_LS(0) + LSCH2_SEC_ADDR,
+ }, {
+ .id = DPAA1_SID_START + 12,
+ .reg = (((DPAA1_SID_START + 12) << 16) | (DPAA1_SID_START + 12)),
+ .reg_addr = SEC_DECOnICID_LS(1) + LSCH2_SEC_ADDR,
+ }, {
+ .id = DPAA1_SID_START + 13,
+ .reg = (((DPAA1_SID_START + 13) << 16) | (DPAA1_SID_START + 13)),
+ .reg_addr = SEC_DECOnICID_LS(2) + LSCH2_SEC_ADDR,
+ },
};
-static struct fman_icid_id_table fman_icid_tbl_ls1046a[] = {
- /* port id, icid */
- SET_FMAN_ICID_ENTRY(0x02, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x03, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x04, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x05, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x06, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x07, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x08, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x09, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x0a, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x0b, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x0c, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x0d, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x28, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x29, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x2a, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x2b, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x2c, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x2d, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x10, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x11, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x30, FSL_DPAA1_STREAM_ID_END),
- SET_FMAN_ICID_ENTRY(0x31, FSL_DPAA1_STREAM_ID_END),
+struct fman_icid_id_table fman_icid_tbl_ls1046a[] = {
+ {
+ .port_id = 0x02,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x03,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x04,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x05,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x06,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x07,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x08,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x09,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x0a,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x0b,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x0c,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x0d,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x28,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x29,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x2a,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x2b,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x2c,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x2d,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x10,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x11,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x30,
+ .icid = DPAA1_SID_END,
+ }, {
+ .port_id = 0x31,
+ .icid = DPAA1_SID_END,
+ },
};
static void set_icid(struct icid_id_table *tbl, int size)
--
2.25.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 2/5] include/soc/fsl: remove unused function prototypes
2020-01-10 11:54 [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support Sascha Hauer
2020-01-10 11:54 ` [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros Sascha Hauer
@ 2020-01-10 11:54 ` Sascha Hauer
2020-01-10 11:54 ` [PATCH 3/5] include/soc/fsl: Make struct ccsr_qman v3 specific Sascha Hauer
` (2 subsequent siblings)
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-01-10 11:54 UTC (permalink / raw)
To: Barebox List
include/soc/fsl/fsl_qbman.h contains function prototypes we do not
implement, drop them.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/soc/fsl/fsl_qbman.h | 5 -----
1 file changed, 5 deletions(-)
diff --git a/include/soc/fsl/fsl_qbman.h b/include/soc/fsl/fsl_qbman.h
index 4687eb9bb1..10cbb16833 100644
--- a/include/soc/fsl/fsl_qbman.h
+++ b/include/soc/fsl/fsl_qbman.h
@@ -5,11 +5,6 @@
#ifndef __FSL_QBMAN_H__
#define __FSL_QBMAN_H__
-void fdt_fixup_qportals(void *blob);
-void fdt_fixup_bportals(void *blob);
-void inhibit_portals(void __iomem *addr, int max_portals,
- int arch_max_portals, int portal_cinh_size);
-void setup_qbman_portals(void);
struct ccsr_qman {
#ifdef CONFIG_SYS_FSL_QMAN_V3
--
2.25.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 3/5] include/soc/fsl: Make struct ccsr_qman v3 specific
2020-01-10 11:54 [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support Sascha Hauer
2020-01-10 11:54 ` [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros Sascha Hauer
2020-01-10 11:54 ` [PATCH 2/5] include/soc/fsl: remove unused function prototypes Sascha Hauer
@ 2020-01-10 11:54 ` Sascha Hauer
2020-01-10 11:54 ` [PATCH 4/5] net: fsl-fman: Do not put hardware in reset before Linux start Sascha Hauer
2020-01-10 11:54 ` [PATCH 5/5] ARM: Layerscape: setup icids for the IOMMU Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-01-10 11:54 UTC (permalink / raw)
To: Barebox List
struct ccsr_qman is ifdeffed for different versions of this structure.
CONFIG_SYS_FSL_QMAN_V3 is not defined which means we happen to use
the wrong version on LS1046a. Hardcode it to the v3 version to make
it work on LS1046a and rename it to ccsr_qman_v3 to make it obvious
that it needs a change on non v3 versions.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-layerscape/icid.c | 2 +-
include/soc/fsl/fsl_qbman.h | 13 +------------
2 files changed, 2 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-layerscape/icid.c b/arch/arm/mach-layerscape/icid.c
index 340ca959ca..62c2d356e2 100644
--- a/arch/arm/mach-layerscape/icid.c
+++ b/arch/arm/mach-layerscape/icid.c
@@ -83,7 +83,7 @@ struct icid_id_table icid_tbl_ls1046a[] = {
.id = DPAA1_SID_START,
.reg = DPAA1_SID_START,
.compat_addr = LSCH2_QMAN_ADDR,
- .reg_addr = offsetof(struct ccsr_qman, liodnr) + LSCH2_QMAN_ADDR,
+ .reg_addr = offsetof(struct ccsr_qman_v3, liodnr) + LSCH2_QMAN_ADDR,
}, {
.compat = "fsl,bman",
.id = DPAA1_SID_START + 1,
diff --git a/include/soc/fsl/fsl_qbman.h b/include/soc/fsl/fsl_qbman.h
index 10cbb16833..1caaf4808d 100644
--- a/include/soc/fsl/fsl_qbman.h
+++ b/include/soc/fsl/fsl_qbman.h
@@ -6,17 +6,8 @@
#ifndef __FSL_QBMAN_H__
#define __FSL_QBMAN_H__
-struct ccsr_qman {
-#ifdef CONFIG_SYS_FSL_QMAN_V3
+struct ccsr_qman_v3 {
u8 res0[0x200];
-#else
- struct {
- u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
- u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
- u32 res;
- u32 qcsp_dd_cfg; /* 0xc - SW Portal Dynamic Debug cfg */
- } qcsp[32];
-#endif
/* Not actually reserved, but irrelevant to u-boot */
u8 res[0xbf8 - 0x200];
u32 ip_rev_1;
@@ -41,14 +32,12 @@ struct ccsr_qman {
u32 ci_rlm_cfg; /* Initiator Read Latency Monitor Cfg */
u32 ci_rlm_avg; /* Initiator Read Latency Monitor Avg */
u8 res7[0x2e8];
-#ifdef CONFIG_SYS_FSL_QMAN_V3
struct {
u32 qcsp_lio_cfg; /* 0x0 - SW Portal n LIO cfg */
u32 qcsp_io_cfg; /* 0x4 - SW Portal n IO cfg */
u32 res;
u32 qcsp_dd_cfg; /* 0xc - SW Portal n Dynamic Debug cfg*/
} qcsp[50];
-#endif
};
struct ccsr_bman {
--
2.25.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 4/5] net: fsl-fman: Do not put hardware in reset before Linux start
2020-01-10 11:54 [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support Sascha Hauer
` (2 preceding siblings ...)
2020-01-10 11:54 ` [PATCH 3/5] include/soc/fsl: Make struct ccsr_qman v3 specific Sascha Hauer
@ 2020-01-10 11:54 ` Sascha Hauer
2020-01-10 11:54 ` [PATCH 5/5] ARM: Layerscape: setup icids for the IOMMU Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-01-10 11:54 UTC (permalink / raw)
To: Barebox List
Linux depends on the icid values configured in the DPAA. Do not put
the hardware into reset in order to preserve the register values.
Without this, the IOMMU doesn't work properly.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/net/fsl-fman.c | 8 --------
1 file changed, 8 deletions(-)
diff --git a/drivers/net/fsl-fman.c b/drivers/net/fsl-fman.c
index 1aae58e494..6d54fcc7c9 100644
--- a/drivers/net/fsl-fman.c
+++ b/drivers/net/fsl-fman.c
@@ -1322,13 +1322,6 @@ static int fsl_fman_probe(struct device_d *dev)
return 0;
}
-static void fsl_fman_remove(struct device_d *dev)
-{
- struct ccsr_fman *reg = dev->priv;
-
- setbits_be32(®->fm_fpm.fmrstc, FMFP_RSTC_RFM);
-}
-
static struct of_device_id fsl_fman_dt_ids[] = {
{
.compatible = "fsl,fman",
@@ -1339,7 +1332,6 @@ static struct of_device_id fsl_fman_dt_ids[] = {
static struct driver_d fman_driver = {
.name = "fsl-fman",
.probe = fsl_fman_probe,
- .remove = fsl_fman_remove,
.of_compatible = DRV_OF_COMPAT(fsl_fman_dt_ids),
};
device_platform_driver(fman_driver);
--
2.25.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
* [PATCH 5/5] ARM: Layerscape: setup icids for the IOMMU
2020-01-10 11:54 [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support Sascha Hauer
` (3 preceding siblings ...)
2020-01-10 11:54 ` [PATCH 4/5] net: fsl-fman: Do not put hardware in reset before Linux start Sascha Hauer
@ 2020-01-10 11:54 ` Sascha Hauer
4 siblings, 0 replies; 6+ messages in thread
From: Sascha Hauer @ 2020-01-10 11:54 UTC (permalink / raw)
To: Barebox List
The Isolation Context Identifiers (icid) have to be configured in the
hardware and communicated to the Kernel via device tree fixups. This
adds the missing bits and pieces to make the IOMMU work under Linux.
As of Linux-5.5 the SMMU doesn't work out of the box. This series has
been tested in conjunction with this Kernel series:
https://lore.kernel.org/patchwork/cover/997994/
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/mach-layerscape/icid.c | 281 ++++++++++++++++++++++++++++++--
include/soc/fsl/immap_lsch2.h | 1 +
2 files changed, 266 insertions(+), 16 deletions(-)
diff --git a/arch/arm/mach-layerscape/icid.c b/arch/arm/mach-layerscape/icid.c
index 62c2d356e2..b574a554ab 100644
--- a/arch/arm/mach-layerscape/icid.c
+++ b/arch/arm/mach-layerscape/icid.c
@@ -1,6 +1,7 @@
#include <common.h>
#include <io.h>
#include <init.h>
+#include <of_address.h>
#include <soc/fsl/immap_lsch2.h>
#include <soc/fsl/fsl_qbman.h>
#include <soc/fsl/fsl_fman.h>
@@ -154,25 +155,25 @@ struct icid_id_table icid_tbl_ls1046a[] = {
.compat = "fsl,sec-v4.0-job-ring",
.id = DPAA1_SID_START + 3,
.reg = (((DPAA1_SID_START + 3) << 16) | (DPAA1_SID_START + 3)),
- .compat_addr = SEC_IRBAR_JRn(0),
+ .compat_addr = LSCH2_SEC_ADDR + SEC_IRBAR_JRn(0),
.reg_addr = SEC_JRnICID_LS(0) + LSCH2_SEC_ADDR,
}, {
.compat = "fsl,sec-v4.0-job-ring",
.id = DPAA1_SID_START + 4,
.reg = (((DPAA1_SID_START + 4) << 16) | (DPAA1_SID_START + 4)),
- .compat_addr = SEC_IRBAR_JRn(1),
+ .compat_addr = LSCH2_SEC_ADDR + SEC_IRBAR_JRn(1),
.reg_addr = SEC_JRnICID_LS(1) + LSCH2_SEC_ADDR,
}, {
.compat = "fsl,sec-v4.0-job-ring",
.id = DPAA1_SID_START + 5,
.reg = (((DPAA1_SID_START + 5) << 16) | (DPAA1_SID_START + 5)),
- .compat_addr = SEC_IRBAR_JRn(2),
+ .compat_addr = LSCH2_SEC_ADDR + SEC_IRBAR_JRn(2),
.reg_addr = SEC_JRnICID_LS(2) + LSCH2_SEC_ADDR,
}, {
.compat = "fsl,sec-v4.0-job-ring",
.id = DPAA1_SID_START + 6,
.reg = (((DPAA1_SID_START + 6) << 16) | (DPAA1_SID_START + 6)),
- .compat_addr = SEC_IRBAR_JRn(3),
+ .compat_addr = LSCH2_SEC_ADDR + SEC_IRBAR_JRn(3),
.reg_addr = SEC_JRnICID_LS(3) + LSCH2_SEC_ADDR,
}, {
.id = DPAA1_SID_START + 7,
@@ -275,35 +276,283 @@ struct fman_icid_id_table fman_icid_tbl_ls1046a[] = {
},
};
-static void set_icid(struct icid_id_table *tbl, int size)
+static int get_fman_port_icid(int port_id, struct fman_icid_id_table *tbl,
+ const int size)
{
int i;
- for (i = 0; i < size; i++)
- out_be32((u32 *)(tbl[i].reg_addr), tbl[i].reg);
+ for (i = 0; i < size; i++) {
+ if (tbl[i].port_id == port_id)
+ return tbl[i].icid;
+ }
+
+ return -ENODEV;
+}
+
+static void fdt_set_iommu_prop(struct device_node *np, phandle iommu_handle,
+ int stream_id)
+{
+ u32 prop[2];
+
+ prop[0] = cpu_to_fdt32(iommu_handle);
+ prop[1] = cpu_to_fdt32(stream_id);
+
+ of_set_property(np, "iommus", prop, sizeof(prop), 1);
+}
+
+static void fdt_fixup_fman_port_icid_by_compat(struct device_node *root,
+ phandle iommu_handle,
+ const char *compat)
+{
+ struct device_node *np;
+ int ret;
+ u32 cell_index, icid;
+
+ for_each_compatible_node_from(np, root, NULL, compat) {
+ ret = of_property_read_u32(np, "cell-index", &cell_index);
+ if (ret)
+ continue;
+
+ icid = get_fman_port_icid(cell_index, fman_icid_tbl_ls1046a,
+ ARRAY_SIZE(fman_icid_tbl_ls1046a));
+ if (icid < 0) {
+ printf("WARNING unknown ICID for fman port %u\n",
+ cell_index);
+ continue;
+ }
+
+ fdt_set_iommu_prop(np, iommu_handle, icid);
+ }
}
-static void set_fman_icids(struct fman_icid_id_table *tbl, int size)
+static void fdt_fixup_fman_icids(struct device_node *root, phandle iommu_handle)
{
+ static const char * const compats[] = {
+ "fsl,fman-v3-port-oh",
+ "fsl,fman-v3-port-rx",
+ "fsl,fman-v3-port-tx",
+ };
int i;
- struct ccsr_fman *fm = (void *)LSCH2_FM1_ADDR;
- for (i = 0; i < size; i++) {
- out_be32(&fm->fm_bmi_common.fmbm_ppid[tbl[i].port_id - 1],
- tbl[i].icid);
+ for (i = 0; i < ARRAY_SIZE(compats); i++)
+ fdt_fixup_fman_port_icid_by_compat(root, iommu_handle, compats[i]);
+}
+
+struct qportal_info {
+ u16 dicid; /* DQRR ICID */
+ u16 ficid; /* frame data ICID */
+ u16 icid;
+ u8 sdest;
+};
+
+struct qportal_info qp_info[] = {
+ {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ }, {
+ .dicid = DPAA1_SID_END,
+ .ficid = DPAA1_SID_END,
+ .icid = DPAA1_SID_END,
+ .sdest = 0,
+ },
+};
+
+#define BMAN_NUM_PORTALS 10
+#define BMAN_MEM_BASE 0x508000000
+#define BMAN_MEM_SIZE 0x08000000
+#define BMAN_SP_CINH_SIZE 0x10000
+#define BMAN_CENA_SIZE (BMAN_MEM_SIZE >> 1)
+#define BMAN_CINH_BASE (BMAN_MEM_BASE + BMAN_CENA_SIZE)
+#define BMAN_SWP_ISDR_REG 0x3e80
+#define QMAN_MEM_BASE 0x500000000
+#define QMAN_MEM_PHYS QMAN_MEM_BASE
+#define QMAN_MEM_SIZE 0x08000000
+#define QMAN_SP_CINH_SIZE 0x10000
+#define QMAN_CENA_SIZE (QMAN_MEM_SIZE >> 1)
+#define QMAN_CINH_BASE (QMAN_MEM_BASE + QMAN_CENA_SIZE)
+#define QMAN_SWP_ISDR_REG 0x3680
+
+static void inhibit_portals(void __iomem *addr, int max_portals,
+ int portal_cinh_size)
+{
+ int i;
+
+ for (i = 0; i < max_portals; i++) {
+ out_be32(addr, -1);
+ addr += portal_cinh_size;
+ }
+}
+
+static void setup_qbman_portals(void)
+{
+ void __iomem *bpaddr = (void *)BMAN_CINH_BASE + BMAN_SWP_ISDR_REG;
+ void __iomem *qpaddr = (void *)QMAN_CINH_BASE + QMAN_SWP_ISDR_REG;
+ struct ccsr_qman_v3 *qman = IOMEM(LSCH2_QMAN_ADDR);
+ int i;
+
+ /* Set the Qman initiator BAR to match the LAW (for DQRR stashing) */
+ out_be32(&qman->qcsp_bare, (u32)(QMAN_MEM_PHYS >> 32));
+ out_be32(&qman->qcsp_bar, (u32)QMAN_MEM_PHYS);
+
+ for (i = 0; i < ARRAY_SIZE(qp_info); i++) {
+ struct qportal_info *qi = &qp_info[i];
+
+ out_be32(&qman->qcsp[i].qcsp_lio_cfg, (qi->icid << 16) | qi->dicid);
+ /* set frame icid */
+ out_be32(&qman->qcsp[i].qcsp_io_cfg, (qi->sdest << 16) | qi->ficid);
+ }
+
+ /* Change default state of BMan ISDR portals to all 1s */
+ inhibit_portals(bpaddr, BMAN_NUM_PORTALS, BMAN_SP_CINH_SIZE);
+ inhibit_portals(qpaddr, ARRAY_SIZE(qp_info), QMAN_SP_CINH_SIZE);
+}
+
+static void fdt_set_qportal_iommu_prop(struct device_node *np, phandle iommu_handle,
+ struct qportal_info *qp_info)
+{
+ u32 prop[6];
+
+ prop[0] = cpu_to_fdt32(iommu_handle);
+ prop[1] = cpu_to_fdt32(qp_info->icid);
+ prop[2] = cpu_to_fdt32(iommu_handle);
+ prop[3] = cpu_to_fdt32(qp_info->dicid);
+ prop[4] = cpu_to_fdt32(iommu_handle);
+ prop[5] = cpu_to_fdt32(qp_info->ficid);
+
+ of_set_property(np, "iommus", prop, sizeof(prop), 1);
+}
+
+static void fdt_fixup_qportals(struct device_node *root, phandle iommu_handle)
+{
+ struct device_node *np;
+ unsigned int maj, min;
+ unsigned int ip_cfg;
+ struct ccsr_qman_v3 *qman = IOMEM(LSCH2_QMAN_ADDR);
+ u32 rev_1 = in_be32(&qman->ip_rev_1);
+ u32 rev_2 = in_be32(&qman->ip_rev_2);
+ u32 cell_index;
+ int ret;
+
+ maj = (rev_1 >> 8) & 0xff;
+ min = rev_1 & 0xff;
+ ip_cfg = rev_2 & 0xff;
+
+ for_each_compatible_node_from(np, root, NULL, "fsl,qman-portal") {
+ ret = of_property_read_u32(np, "cell-index", &cell_index);
+ if (ret)
+ continue;
+
+ fdt_set_qportal_iommu_prop(np, iommu_handle, &qp_info[cell_index]);
+ }
+}
+
+static int icid_of_fixup(struct device_node *root, void *context)
+{
+ int i;
+ struct device_node *iommu;
+ phandle iommu_handle;
+
+ iommu = of_find_compatible_node(root, NULL, "arm,mmu-500");
+ if (!iommu)
+ return -ENOENT;
+
+ iommu_handle = of_node_create_phandle(iommu);
+
+ for (i = 0; i < ARRAY_SIZE(icid_tbl_ls1046a); i++) {
+ struct icid_id_table *icid = &icid_tbl_ls1046a[i];
+ struct device_node *np;
+
+ if (!icid->compat)
+ continue;
+
+ for_each_compatible_node_from(np, root, NULL, icid->compat) {
+ struct resource res;
+
+ if (of_address_to_resource(np, 0, &res))
+ continue;
+
+ if (res.start == icid->compat_addr) {
+ fdt_set_iommu_prop(np, iommu_handle, icid->id);
+ break;
+ }
+ }
}
+
+ fdt_fixup_fman_icids(root, iommu_handle);
+ fdt_fixup_qportals(root, iommu_handle);
+
+ return 0;
}
-static int set_icids(void)
+static int layerscape_setup_icids(void)
{
+ int i;
+ struct ccsr_fman *fm = (void *)LSCH2_FM1_ADDR;
+
if (!of_machine_is_compatible("fsl,ls1046a"))
return 0;
/* setup general icid offsets */
- set_icid(icid_tbl_ls1046a, ARRAY_SIZE(icid_tbl_ls1046a));
+ for (i = 0; i < ARRAY_SIZE(icid_tbl_ls1046a); i++) {
+ struct icid_id_table *icid = &icid_tbl_ls1046a[i];
+
+ out_be32((u32 *)(icid->reg_addr), icid->reg);
+ }
+
+ /* setup fman icids */
+ for (i = 0; i < ARRAY_SIZE(fman_icid_tbl_ls1046a); i++) {
+ struct fman_icid_id_table *icid = &fman_icid_tbl_ls1046a[i];
+
+ out_be32(&fm->fm_bmi_common.fmbm_ppid[icid->port_id - 1],
+ icid->icid);
+ }
+
+ setup_qbman_portals();
- set_fman_icids(fman_icid_tbl_ls1046a, ARRAY_SIZE(fman_icid_tbl_ls1046a));
+ of_register_fixup(icid_of_fixup, NULL);
return 0;
}
-postcore_initcall(set_icids);
\ No newline at end of file
+coredevice_initcall(layerscape_setup_icids);
diff --git a/include/soc/fsl/immap_lsch2.h b/include/soc/fsl/immap_lsch2.h
index 4eb6658788..1b74c77908 100644
--- a/include/soc/fsl/immap_lsch2.h
+++ b/include/soc/fsl/immap_lsch2.h
@@ -56,6 +56,7 @@
#define LSCH2_PCIE1_ADDR (LSCH2_IMMR + 0x02400000)
#define LSCH2_PCIE2_ADDR (LSCH2_IMMR + 0x02500000)
#define LSCH2_PCIE3_ADDR (LSCH2_IMMR + 0x02600000)
+#define LSCH2_SEC_ADDR (LSCH2_IMMR + 0x00700000)
#define LSCH2_QDMA_BASE_ADDR (LSCH2_IMMR + 0x07380000)
#define LSCH2_EHCI_USB1_ADDR (LSCH2_IMMR + 0x07600000)
--
2.25.0.rc1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2020-01-10 11:54 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-01-10 11:54 [PATCH 0/5] ARM: Layerscape: Add Fixups for Linux IOMMU support Sascha Hauer
2020-01-10 11:54 ` [PATCH 1/5] ARM: Layerscape: replace overcomplicated macros Sascha Hauer
2020-01-10 11:54 ` [PATCH 2/5] include/soc/fsl: remove unused function prototypes Sascha Hauer
2020-01-10 11:54 ` [PATCH 3/5] include/soc/fsl: Make struct ccsr_qman v3 specific Sascha Hauer
2020-01-10 11:54 ` [PATCH 4/5] net: fsl-fman: Do not put hardware in reset before Linux start Sascha Hauer
2020-01-10 11:54 ` [PATCH 5/5] ARM: Layerscape: setup icids for the IOMMU Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox