From: Clement Leger <cleger@kalray.eu>
To: barebox@lists.infradead.org, Sascha Hauer <s.hauer@pengutronix.de>
Cc: Clement Leger <cleger@kalray.eu>
Subject: [PATCH 0/5] Add support for Kalray k1c core
Date: Wed, 15 Jan 2020 11:26:45 +0100 [thread overview]
Message-ID: <20200115102650.11739-1-cleger@kalray.eu> (raw)
Kalray k1c core is embedded in Kalray Coolidge SoC. This core has the
following features:
- 32/64 bits
- 6-issue VLIW architecture
- 64 x 64bits general purpose registers
- SIMD instructions
- little-endian
This port is a 64 bits one and allows to boot up to a barebox prompt on a k200
board. k1c support for clocksource and watchdog is also part of this port.
In order to build a usable toolchain, build scripts are provided at the
following address: https://github.com/kalray/build-scripts.
Kalray uses FOSS which is available at https://github.com/kalray
Clement Leger (5):
k1c: Initial Kalray Coolidge (k1c) architecture support
k1c: Add processor definitions
k1c: Add support for device tree
clocksource: k1c: Add k1c clocksource support
watchdog: k1c: Add k1c watchdog support
arch/k1c/Kconfig | 65 +
arch/k1c/Makefile | 37 +
arch/k1c/boards/generic/Makefile | 0
arch/k1c/configs/generic_defconfig | 13 +
arch/k1c/cpu/Makefile | 7 +
arch/k1c/cpu/barebox.lds.S | 98 +
arch/k1c/cpu/cpu.c | 22 +
arch/k1c/cpu/exception.S | 18 +
arch/k1c/cpu/start.S | 164 ++
arch/k1c/dts/Makefile | 13 +
arch/k1c/dts/k200.dts | 105 +
arch/k1c/include/asm/barrier.h | 18 +
arch/k1c/include/asm/bitops.h | 27 +
arch/k1c/include/asm/bitsperlong.h | 12 +
arch/k1c/include/asm/byteorder.h | 12 +
arch/k1c/include/asm/common.h | 19 +
arch/k1c/include/asm/elf.h | 21 +
arch/k1c/include/asm/io.h | 14 +
arch/k1c/include/asm/linkage.h | 10 +
arch/k1c/include/asm/posix_types.h | 12 +
arch/k1c/include/asm/privilege.h | 166 ++
arch/k1c/include/asm/sections.h | 12 +
arch/k1c/include/asm/sfr.h | 61 +
arch/k1c/include/asm/sfr_defs.h | 5029 ++++++++++++++++++++++++++++++++++++
arch/k1c/include/asm/string.h | 14 +
arch/k1c/include/asm/swab.h | 14 +
arch/k1c/include/asm/sys_arch.h | 46 +
arch/k1c/include/asm/types.h | 14 +
arch/k1c/include/asm/unaligned.h | 17 +
arch/k1c/lib/Makefile | 6 +
arch/k1c/lib/asm-offsets.c | 11 +
arch/k1c/lib/board.c | 20 +
arch/k1c/lib/cpuinfo.c | 20 +
arch/k1c/lib/dtb.c | 31 +
arch/k1c/lib/poweroff.c | 43 +
drivers/clocksource/Kconfig | 4 +
drivers/clocksource/Makefile | 1 +
drivers/clocksource/k1c_timer.c | 59 +
drivers/of/Kconfig | 2 +-
drivers/watchdog/Kconfig | 7 +
drivers/watchdog/Makefile | 1 +
drivers/watchdog/k1c_wdt.c | 126 +
42 files changed, 6390 insertions(+), 1 deletion(-)
create mode 100644 arch/k1c/Kconfig
create mode 100644 arch/k1c/Makefile
create mode 100644 arch/k1c/boards/generic/Makefile
create mode 100644 arch/k1c/configs/generic_defconfig
create mode 100644 arch/k1c/cpu/Makefile
create mode 100644 arch/k1c/cpu/barebox.lds.S
create mode 100644 arch/k1c/cpu/cpu.c
create mode 100644 arch/k1c/cpu/exception.S
create mode 100644 arch/k1c/cpu/start.S
create mode 100644 arch/k1c/dts/Makefile
create mode 100644 arch/k1c/dts/k200.dts
create mode 100644 arch/k1c/include/asm/barrier.h
create mode 100644 arch/k1c/include/asm/bitops.h
create mode 100644 arch/k1c/include/asm/bitsperlong.h
create mode 100644 arch/k1c/include/asm/byteorder.h
create mode 100644 arch/k1c/include/asm/common.h
create mode 100644 arch/k1c/include/asm/elf.h
create mode 100644 arch/k1c/include/asm/io.h
create mode 100644 arch/k1c/include/asm/linkage.h
create mode 100644 arch/k1c/include/asm/posix_types.h
create mode 100644 arch/k1c/include/asm/privilege.h
create mode 100644 arch/k1c/include/asm/sections.h
create mode 100644 arch/k1c/include/asm/sfr.h
create mode 100644 arch/k1c/include/asm/sfr_defs.h
create mode 100644 arch/k1c/include/asm/string.h
create mode 100644 arch/k1c/include/asm/swab.h
create mode 100644 arch/k1c/include/asm/sys_arch.h
create mode 100644 arch/k1c/include/asm/types.h
create mode 100644 arch/k1c/include/asm/unaligned.h
create mode 100644 arch/k1c/lib/Makefile
create mode 100644 arch/k1c/lib/asm-offsets.c
create mode 100644 arch/k1c/lib/board.c
create mode 100644 arch/k1c/lib/cpuinfo.c
create mode 100644 arch/k1c/lib/dtb.c
create mode 100644 arch/k1c/lib/poweroff.c
create mode 100644 drivers/clocksource/k1c_timer.c
create mode 100644 drivers/watchdog/k1c_wdt.c
--
2.15.0.276.g89ea799
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2020-01-15 10:49 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-15 10:26 Clement Leger [this message]
2020-01-15 10:26 ` [PATCH 1/5] k1c: Initial Kalray Coolidge (k1c) architecture support Clement Leger
2020-01-16 9:26 ` Sascha Hauer
2020-01-16 10:49 ` Clément Leger
2020-01-16 10:55 ` Sascha Hauer
2020-01-16 12:24 ` Clément Leger
2020-01-16 13:11 ` Sascha Hauer
2020-01-16 13:26 ` Clément Leger
2020-01-16 13:34 ` Sascha Hauer
2020-01-15 10:26 ` [PATCH 2/5] k1c: Add processor definitions Clement Leger
2020-01-15 10:26 ` [PATCH 3/5] k1c: Add support for device tree Clement Leger
2020-01-15 10:26 ` [PATCH 4/5] clocksource: k1c: Add k1c clocksource support Clement Leger
2020-01-15 10:26 ` [PATCH 5/5] watchdog: k1c: Add k1c watchdog support Clement Leger
2020-01-20 15:10 ` Ahmad Fatoum
2020-01-20 16:08 ` Clément Leger
2020-01-16 8:25 ` [PATCH 0/5] Add support for Kalray k1c core Sascha Hauer
2020-01-16 8:53 ` Clément Leger
2020-01-16 9:22 ` Sascha Hauer
2020-01-16 9:37 ` Clément Leger
2020-01-16 9:46 ` Sascha Hauer
2020-01-16 9:49 ` Roland Hieber
2020-01-16 9:53 ` Clément Leger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200115102650.11739-1-cleger@kalray.eu \
--to=cleger@kalray.eu \
--cc=barebox@lists.infradead.org \
--cc=s.hauer@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox