* [PATCH v2 1/7] usb: dwc2: Add host controller driver
2020-01-22 15:49 [PATCH v2 0/7] usb: dwc2 host driver Jules Maselbas
@ 2020-01-22 15:49 ` Jules Maselbas
2020-01-24 14:32 ` Sascha Hauer
2020-01-22 15:49 ` [PATCH v2 2/7] usb: dwc2: host: Read dr_mode from device tree Jules Maselbas
` (5 subsequent siblings)
6 siblings, 1 reply; 11+ messages in thread
From: Jules Maselbas @ 2020-01-22 15:49 UTC (permalink / raw)
To: Barebox List; +Cc: Jules Maselbas
The host driver is taken from U-Boot and mix with some part from Linux.
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
---
drivers/usb/Kconfig | 2 +
drivers/usb/Makefile | 1 +
drivers/usb/dwc2/Kconfig | 4 +
drivers/usb/dwc2/Makefile | 1 +
drivers/usb/dwc2/core.c | 614 +++++++++++++++++++++++++++
drivers/usb/dwc2/core.h | 546 ++++++++++++++++++++++++
drivers/usb/dwc2/dwc2.c | 101 +++++
drivers/usb/dwc2/dwc2.h | 41 ++
drivers/usb/dwc2/host.c | 617 +++++++++++++++++++++++++++
drivers/usb/dwc2/regs.h | 847 ++++++++++++++++++++++++++++++++++++++
drivers/usb/dwc2/rhub.c | 419 +++++++++++++++++++
11 files changed, 3193 insertions(+)
create mode 100644 drivers/usb/dwc2/Kconfig
create mode 100644 drivers/usb/dwc2/Makefile
create mode 100644 drivers/usb/dwc2/core.c
create mode 100644 drivers/usb/dwc2/core.h
create mode 100644 drivers/usb/dwc2/dwc2.c
create mode 100644 drivers/usb/dwc2/dwc2.h
create mode 100644 drivers/usb/dwc2/host.c
create mode 100644 drivers/usb/dwc2/regs.h
create mode 100644 drivers/usb/dwc2/rhub.c
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 99eff1c8d..aab1564ab 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -9,6 +9,8 @@ if USB_HOST
source "drivers/usb/imx/Kconfig"
+source "drivers/usb/dwc2/Kconfig"
+
source "drivers/usb/dwc3/Kconfig"
source "drivers/usb/host/Kconfig"
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 9e9809950..ecd7ad1d3 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -1,5 +1,6 @@
obj-$(CONFIG_USB) += core/
obj-$(CONFIG_USB_IMX_CHIPIDEA) += imx/
+obj-$(CONFIG_USB_DWC2) += dwc2/
obj-$(CONFIG_USB_DWC3) += dwc3/
obj-$(CONFIG_USB_MUSB) += musb/
obj-$(CONFIG_USB_GADGET) += gadget/
diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig
new file mode 100644
index 000000000..c88134cbb
--- /dev/null
+++ b/drivers/usb/dwc2/Kconfig
@@ -0,0 +1,4 @@
+config USB_DWC2
+ bool "DWC2 driver"
+ help
+ DesignWare Core USB2 OTG driver.
diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile
new file mode 100644
index 000000000..3b922c282
--- /dev/null
+++ b/drivers/usb/dwc2/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_USB_DWC2) += dwc2.o core.o host.o rhub.o
diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c
new file mode 100644
index 000000000..0046e955f
--- /dev/null
+++ b/drivers/usb/dwc2/core.c
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include "dwc2.h"
+
+void dwc2_set_param_otg_cap(struct dwc2 *dwc2)
+{
+ u8 val;
+
+ switch (dwc2->hw_params.op_mode) {
+ case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+ val = DWC2_CAP_PARAM_HNP_SRP_CAPABLE;
+ break;
+ case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ val = DWC2_CAP_PARAM_SRP_ONLY_CAPABLE;
+ break;
+ default:
+ val = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
+ break;
+ }
+
+ dwc2->params.otg_cap = val;
+}
+
+void dwc2_set_param_phy_type(struct dwc2 *dwc2)
+{
+ u8 val;
+
+ switch (dwc2->hw_params.hs_phy_type) {
+ case GHWCFG2_HS_PHY_TYPE_UTMI:
+ case GHWCFG2_HS_PHY_TYPE_UTMI_ULPI:
+ val = DWC2_PHY_TYPE_PARAM_UTMI;
+ break;
+ case GHWCFG2_HS_PHY_TYPE_ULPI:
+ val = DWC2_PHY_TYPE_PARAM_ULPI;
+ break;
+ case GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED:
+ val = DWC2_PHY_TYPE_PARAM_FS;
+ break;
+ }
+
+ dwc2->params.phy_type = val;
+}
+
+void dwc2_set_param_speed(struct dwc2 *dwc2)
+{
+ if (dwc2->params.phy_type == DWC2_PHY_TYPE_PARAM_FS)
+ dwc2->params.speed = DWC2_SPEED_PARAM_FULL;
+ else
+ dwc2->params.speed = DWC2_SPEED_PARAM_HIGH;
+}
+
+void dwc2_set_param_phy_utmi_width(struct dwc2 *dwc2)
+{
+ int val;
+
+ val = (dwc2->hw_params.utmi_phy_data_width ==
+ GHWCFG4_UTMI_PHY_DATA_WIDTH_8) ? 8 : 16;
+
+ dwc2->params.phy_utmi_width = val;
+}
+
+/**
+ * dwc2_set_default_params() - Set all core parameters to their
+ * auto-detected default values.
+ *
+ * @dwc2: Programming view of the DWC2 controller
+ *
+ */
+void dwc2_set_default_params(struct dwc2 *dwc2)
+{
+ struct dwc2_hw_params *hw = &dwc2->hw_params;
+ struct dwc2_core_params *p = &dwc2->params;
+ bool dma_capable = !(hw->arch == GHWCFG2_SLAVE_ONLY_ARCH);
+
+ dwc2_set_param_otg_cap(dwc2);
+ dwc2_set_param_phy_type(dwc2);
+ dwc2_set_param_speed(dwc2);
+ dwc2_set_param_phy_utmi_width(dwc2);
+ p->phy_ulpi_ddr = false;
+ p->phy_ulpi_ext_vbus = false;
+
+ p->enable_dynamic_fifo = hw->enable_dynamic_fifo;
+ p->en_multiple_tx_fifo = hw->en_multiple_tx_fifo;
+ p->i2c_enable = hw->i2c_enable;
+ p->acg_enable = hw->acg_enable;
+ p->ulpi_fs_ls = false;
+ p->ts_dline = false;
+ p->reload_ctl = (hw->snpsid >= DWC2_CORE_REV_2_92a);
+ p->uframe_sched = true;
+ p->external_id_pin_ctl = false;
+ p->lpm = true;
+ p->lpm_clock_gating = true;
+ p->besl = true;
+ p->hird_threshold_en = true;
+ p->hird_threshold = 4;
+ p->ipg_isoc_en = false;
+ p->max_packet_count = hw->max_packet_count;
+ p->max_transfer_size = hw->max_transfer_size;
+ p->ahbcfg = GAHBCFG_HBSTLEN_INCR << GAHBCFG_HBSTLEN_SHIFT;
+
+ p->dma = dma_capable;
+ p->dma_desc = false;
+
+ if (dwc2->dr_mode == USB_DR_MODE_HOST ||
+ dwc2->dr_mode == USB_DR_MODE_OTG) {
+ p->host_support_fs_ls_low_power = false;
+ p->host_ls_low_power_phy_clk = false;
+ p->host_channels = hw->host_channels;
+ p->host_rx_fifo_size = hw->rx_fifo_size;
+ p->host_nperio_tx_fifo_size = hw->host_nperio_tx_fifo_size;
+ p->host_perio_tx_fifo_size = hw->host_perio_tx_fifo_size;
+ }
+}
+
+int dwc2_core_snpsid(struct dwc2 *dwc2)
+{
+ struct dwc2_hw_params *hw = &dwc2->hw_params;
+
+ hw->snpsid = dwc2_readl(dwc2, GSNPSID);
+
+ /*
+ * Attempt to ensure this device is really a DWC2 Controller.
+ * Read and verify the GSNPSID register contents. The value should be
+ * 0x4f54xxxx, 0x5531xxxx or 0x5532xxxx
+ */
+ hw->snpsid = dwc2_readl(dwc2, GSNPSID);
+ if ((hw->snpsid & GSNPSID_ID_MASK) != DWC2_OTG_ID &&
+ (hw->snpsid & GSNPSID_ID_MASK) != DWC2_FS_IOT_ID &&
+ (hw->snpsid & GSNPSID_ID_MASK) != DWC2_HS_IOT_ID) {
+ dwc2_err(dwc2, "Bad value for GSNPSID: 0x%08x\n",
+ hw->snpsid);
+ return -ENODEV;
+ }
+
+ dwc2_dbg(dwc2, "Core Release: %1x.%1x%1x%1x (snpsid=%x)\n",
+ hw->snpsid >> 12 & 0xf, hw->snpsid >> 8 & 0xf,
+ hw->snpsid >> 4 & 0xf, hw->snpsid & 0xf, hw->snpsid);
+
+ return 0;
+}
+
+/**
+ * During device initialization, read various hardware configuration
+ * registers and interpret the contents.
+ *
+ * @dwc2: Programming view of the DWC2 controller
+ *
+ */
+void dwc2_get_hwparams(struct dwc2 *dwc2)
+{
+ struct dwc2_hw_params *hw = &dwc2->hw_params;
+ unsigned int width;
+ u32 hwcfg1, hwcfg2, hwcfg3, hwcfg4;
+ u32 grxfsiz;
+
+ hwcfg1 = dwc2_readl(dwc2, GHWCFG1);
+ hwcfg2 = dwc2_readl(dwc2, GHWCFG2);
+ hwcfg3 = dwc2_readl(dwc2, GHWCFG3);
+ hwcfg4 = dwc2_readl(dwc2, GHWCFG4);
+ grxfsiz = dwc2_readl(dwc2, GRXFSIZ);
+
+ /* hwcfg1 */
+ hw->dev_ep_dirs = hwcfg1;
+
+ /* hwcfg2 */
+ hw->op_mode = (hwcfg2 & GHWCFG2_OP_MODE_MASK) >>
+ GHWCFG2_OP_MODE_SHIFT;
+ hw->arch = (hwcfg2 & GHWCFG2_ARCHITECTURE_MASK) >>
+ GHWCFG2_ARCHITECTURE_SHIFT;
+ hw->enable_dynamic_fifo = !!(hwcfg2 & GHWCFG2_DYNAMIC_FIFO);
+ hw->host_channels = 1 + ((hwcfg2 & GHWCFG2_NUM_HOST_CHAN_MASK) >>
+ GHWCFG2_NUM_HOST_CHAN_SHIFT);
+ hw->hs_phy_type = (hwcfg2 & GHWCFG2_HS_PHY_TYPE_MASK) >>
+ GHWCFG2_HS_PHY_TYPE_SHIFT;
+ hw->fs_phy_type = (hwcfg2 & GHWCFG2_FS_PHY_TYPE_MASK) >>
+ GHWCFG2_FS_PHY_TYPE_SHIFT;
+ hw->num_dev_ep = (hwcfg2 & GHWCFG2_NUM_DEV_EP_MASK) >>
+ GHWCFG2_NUM_DEV_EP_SHIFT;
+ hw->nperio_tx_q_depth =
+ (hwcfg2 & GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK) >>
+ GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT << 1;
+ hw->host_perio_tx_q_depth =
+ (hwcfg2 & GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK) >>
+ GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT << 1;
+ hw->dev_token_q_depth =
+ (hwcfg2 & GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK) >>
+ GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT;
+
+ /* hwcfg3 */
+ width = (hwcfg3 & GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK) >>
+ GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT;
+ hw->max_transfer_size = (1 << (width + 11)) - 1;
+ width = (hwcfg3 & GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK) >>
+ GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT;
+ hw->max_packet_count = (1 << (width + 4)) - 1;
+ hw->i2c_enable = !!(hwcfg3 & GHWCFG3_I2C);
+ hw->total_fifo_size = (hwcfg3 & GHWCFG3_DFIFO_DEPTH_MASK) >>
+ GHWCFG3_DFIFO_DEPTH_SHIFT;
+ hw->lpm_mode = !!(hwcfg3 & GHWCFG3_OTG_LPM_EN);
+
+ /* hwcfg4 */
+ hw->en_multiple_tx_fifo = !!(hwcfg4 & GHWCFG4_DED_FIFO_EN);
+ hw->num_dev_perio_in_ep = (hwcfg4 & GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK) >>
+ GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT;
+ hw->num_dev_in_eps = (hwcfg4 & GHWCFG4_NUM_IN_EPS_MASK) >>
+ GHWCFG4_NUM_IN_EPS_SHIFT;
+ hw->dma_desc_enable = !!(hwcfg4 & GHWCFG4_DESC_DMA);
+ hw->power_optimized = !!(hwcfg4 & GHWCFG4_POWER_OPTIMIZ);
+ hw->hibernation = !!(hwcfg4 & GHWCFG4_HIBER);
+ hw->utmi_phy_data_width = (hwcfg4 & GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK) >>
+ GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT;
+ hw->acg_enable = !!(hwcfg4 & GHWCFG4_ACG_SUPPORTED);
+ hw->ipg_isoc_en = !!(hwcfg4 & GHWCFG4_IPG_ISOC_SUPPORTED);
+
+ /* fifo sizes */
+ hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >>
+ GRXFSIZ_DEPTH_SHIFT;
+}
+
+/*
+ * Initializes the FSLSPClkSel field of the HCFG register depending on the
+ * PHY type
+ */
+void dwc2_init_fs_ls_pclk_sel(struct dwc2 *dwc2)
+{
+ u32 hcfg, val;
+
+ if ((dwc2->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ dwc2->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ dwc2->params.ulpi_fs_ls) ||
+ dwc2->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* Full speed PHY */
+ val = HCFG_FSLSPCLKSEL_48_MHZ;
+ } else {
+ /* High speed PHY running at full speed or high speed */
+ val = HCFG_FSLSPCLKSEL_30_60_MHZ;
+ }
+
+ dwc2_dbg(dwc2, "Initializing HCFG.FSLSPClkSel to %08x\n", val);
+ hcfg = dwc2_readl(dwc2, HCFG);
+ hcfg &= ~HCFG_FSLSPCLKSEL_MASK;
+ hcfg |= val << HCFG_FSLSPCLKSEL_SHIFT;
+ dwc2_writel(dwc2, hcfg, HCFG);
+}
+
+void dwc2_flush_all_fifo(struct dwc2 *dwc2)
+{
+ uint32_t greset;
+
+ /* Wait for AHB master IDLE state */
+ if (dwc2_wait_bit_set(dwc2, GRSTCTL, GRSTCTL_AHBIDLE, 10000)) {
+ dwc2_warn(dwc2, "%s: Timeout waiting for AHB Idle\n", __func__);
+ return;
+ }
+
+ greset = GRSTCTL_TXFFLSH | GRSTCTL_RXFFLSH;
+ /* TXFNUM of 0x10 is to flush all TX FIFO */
+ dwc2_writel(dwc2, greset | GRSTCTL_TXFNUM(0x10), GRSTCTL);
+
+ /* Wait for TxFIFO and RxFIFO flush done */
+ if (dwc2_wait_bit_clear(dwc2, GRSTCTL, greset, 10000))
+ dwc2_warn(dwc2, "Timeout flushing fifos (GRSTCTL=%08x)\n",
+ dwc2_readl(dwc2, GRSTCTL));
+
+ /* Wait for 3 PHY Clocks */
+ udelay(1);
+}
+
+static int dwc2_fs_phy_init(struct dwc2 *dwc2, bool select_phy)
+{
+ u32 usbcfg, ggpio, i2cctl;
+ int retval = 0;
+
+ /*
+ * core_init() is now called on every switch so only call the
+ * following for the first time through
+ */
+ if (select_phy) {
+ dwc2_dbg(dwc2, "FS PHY selected\n");
+
+ usbcfg = dwc2_readl(dwc2, GUSBCFG);
+ if (!(usbcfg & GUSBCFG_PHYSEL)) {
+ usbcfg |= GUSBCFG_PHYSEL;
+ dwc2_writel(dwc2, usbcfg, GUSBCFG);
+
+ /* Reset after a PHY select */
+ retval = dwc2_core_reset(dwc2);
+
+ if (retval) {
+ dwc2_err(dwc2,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
+ }
+
+ if (dwc2->params.activate_stm_fs_transceiver) {
+ ggpio = dwc2_readl(dwc2, GGPIO);
+ if (!(ggpio & GGPIO_STM32_OTG_GCCFG_PWRDWN)) {
+ dwc2_dbg(dwc2, "Activating transceiver\n");
+ /*
+ * STM32F4x9 uses the GGPIO register as general
+ * core configuration register.
+ */
+ ggpio |= GGPIO_STM32_OTG_GCCFG_PWRDWN;
+ dwc2_writel(dwc2, ggpio, GGPIO);
+ }
+ }
+ }
+
+ if (dwc2->params.i2c_enable) {
+ dwc2_dbg(dwc2, "FS PHY enabling I2C\n");
+
+ /* Program GUSBCFG.OtgUtmiFsSel to I2C */
+ usbcfg = dwc2_readl(dwc2, GUSBCFG);
+ usbcfg |= GUSBCFG_OTG_UTMI_FS_SEL;
+ dwc2_writel(dwc2, usbcfg, GUSBCFG);
+
+ /* Program GI2CCTL.I2CEn */
+ i2cctl = dwc2_readl(dwc2, GI2CCTL);
+ i2cctl &= ~GI2CCTL_I2CDEVADDR_MASK;
+ i2cctl |= 1 << GI2CCTL_I2CDEVADDR_SHIFT;
+ i2cctl &= ~GI2CCTL_I2CEN;
+ dwc2_writel(dwc2, i2cctl, GI2CCTL);
+ i2cctl |= GI2CCTL_I2CEN;
+ dwc2_writel(dwc2, i2cctl, GI2CCTL);
+ }
+
+ return retval;
+}
+
+static int dwc2_hs_phy_init(struct dwc2 *dwc2, bool select_phy)
+{
+ u32 usbcfg, usbcfg_old;
+ int retval = 0;
+
+ if (!select_phy)
+ return 0;
+
+ usbcfg = dwc2_readl(dwc2, GUSBCFG);
+ usbcfg_old = usbcfg;
+
+ /*
+ * HS PHY parameters. These parameters are preserved during soft reset
+ * so only program the first time. Do a soft reset immediately after
+ * setting phyif.
+ */
+ switch (dwc2->params.phy_type) {
+ case DWC2_PHY_TYPE_PARAM_ULPI:
+ /* ULPI interface */
+ dwc2_dbg(dwc2, "HS ULPI PHY selected\n");
+ usbcfg |= GUSBCFG_ULPI_UTMI_SEL;
+ usbcfg &= ~(GUSBCFG_PHYIF16 | GUSBCFG_DDRSEL | GUSBCFG_PHYSEL);
+ if (dwc2->params.phy_ulpi_ddr)
+ usbcfg |= GUSBCFG_DDRSEL;
+
+ /* Set external VBUS indicator as needed. */
+ if (dwc2->params.phy_ulpi_ext_vbus_ind) {
+ dwc2_dbg(dwc2, "Use external VBUS indicator\n");
+ usbcfg |= GUSBCFG_ULPI_EXT_VBUS_IND;
+ usbcfg &= ~GUSBCFG_INDICATORCOMPLEMENT;
+ usbcfg &= ~GUSBCFG_INDICATORPASSTHROUGH;
+
+ if (dwc2->params.phy_ulpi_ext_vbus_ind_complement)
+ usbcfg |= GUSBCFG_INDICATORCOMPLEMENT;
+ if (dwc2->params.phy_ulpi_ext_vbus_ind_passthrough)
+ usbcfg |= GUSBCFG_INDICATORPASSTHROUGH;
+ }
+ break;
+ case DWC2_PHY_TYPE_PARAM_UTMI:
+ /* UTMI+ interface */
+ dwc2_dbg(dwc2, "HS UTMI+ PHY selected\n");
+ usbcfg &= ~(GUSBCFG_ULPI_UTMI_SEL | GUSBCFG_PHYIF16);
+ if (dwc2->params.phy_utmi_width == 16)
+ usbcfg |= GUSBCFG_PHYIF16;
+ break;
+ default:
+ dwc2_err(dwc2, "FS PHY selected at HS!\n");
+ break;
+ }
+
+ if (usbcfg != usbcfg_old) {
+ dwc2_writel(dwc2, usbcfg, GUSBCFG);
+
+ /* Reset after setting the PHY parameters */
+ retval = dwc2_core_reset(dwc2);
+ if (retval) {
+ dwc2_err(dwc2,
+ "%s: Reset failed, aborting", __func__);
+ return retval;
+ }
+ }
+
+ return retval;
+}
+
+int dwc2_phy_init(struct dwc2 *dwc2, bool select_phy)
+{
+ u32 usbcfg;
+ int retval = 0;
+
+ if ((dwc2->params.speed == DWC2_SPEED_PARAM_FULL ||
+ dwc2->params.speed == DWC2_SPEED_PARAM_LOW) &&
+ dwc2->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) {
+ /* If FS/LS mode with FS/LS PHY */
+ retval = dwc2_fs_phy_init(dwc2, select_phy);
+ if (retval)
+ return retval;
+ } else {
+ /* High speed PHY */
+ retval = dwc2_hs_phy_init(dwc2, select_phy);
+ if (retval)
+ return retval;
+ }
+
+ usbcfg = dwc2_readl(dwc2, GUSBCFG);
+ usbcfg &= ~GUSBCFG_ULPI_FS_LS;
+ usbcfg &= ~GUSBCFG_ULPI_CLK_SUSP_M;
+ if (dwc2->hw_params.hs_phy_type == GHWCFG2_HS_PHY_TYPE_ULPI &&
+ dwc2->hw_params.fs_phy_type == GHWCFG2_FS_PHY_TYPE_DEDICATED &&
+ dwc2->params.ulpi_fs_ls) {
+ dwc2_dbg(dwc2, "Setting ULPI FSLS\n");
+ usbcfg |= GUSBCFG_ULPI_FS_LS;
+ usbcfg |= GUSBCFG_ULPI_CLK_SUSP_M;
+ }
+ dwc2_writel(dwc2, usbcfg, GUSBCFG);
+
+ return retval;
+}
+
+int dwc2_gahbcfg_init(struct dwc2 *dwc2)
+{
+ u32 ahbcfg = dwc2_readl(dwc2, GAHBCFG);
+
+ switch (dwc2->hw_params.arch) {
+ case GHWCFG2_EXT_DMA_ARCH:
+ dwc2_err(dwc2, "External DMA Mode not supported\n");
+ return -EINVAL;
+
+ case GHWCFG2_INT_DMA_ARCH:
+ dwc2_dbg(dwc2, "Internal DMA Mode\n");
+ if (dwc2->params.ahbcfg != -1) {
+ ahbcfg &= GAHBCFG_CTRL_MASK;
+ ahbcfg |= dwc2->params.ahbcfg &
+ ~GAHBCFG_CTRL_MASK;
+ }
+ break;
+
+ case GHWCFG2_SLAVE_ONLY_ARCH:
+ default:
+ dwc2_dbg(dwc2, "Slave Only Mode\n");
+ break;
+ }
+
+ if (dwc2->params.dma)
+ ahbcfg |= GAHBCFG_DMA_EN;
+ else
+ dwc2->params.dma_desc = false;
+
+ dwc2_writel(dwc2, ahbcfg, GAHBCFG);
+
+ return 0;
+}
+
+void dwc2_gusbcfg_init(struct dwc2 *dwc2)
+{
+ u32 usbcfg;
+
+ usbcfg = dwc2_readl(dwc2, GUSBCFG);
+ usbcfg &= ~(GUSBCFG_HNPCAP | GUSBCFG_SRPCAP);
+
+ switch (dwc2->hw_params.op_mode) {
+ case GHWCFG2_OP_MODE_HNP_SRP_CAPABLE:
+ if (dwc2->params.otg_cap ==
+ DWC2_CAP_PARAM_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_HNPCAP;
+
+ case GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_SRP_CAPABLE_HOST:
+ if (dwc2->params.otg_cap !=
+ DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE)
+ usbcfg |= GUSBCFG_SRPCAP;
+ break;
+
+ case GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE:
+ case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE:
+ case GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST:
+ default:
+ break;
+ }
+
+ dwc2_writel(dwc2, usbcfg, GUSBCFG);
+}
+
+/*
+ * Do core a soft reset of the core. Be careful with this because it
+ * resets all the internal state machines of the core.
+ */
+int dwc2_core_reset(struct dwc2 *dwc2)
+{
+ bool wait_for_host_mode = false;
+ uint32_t greset;
+ int ret;
+
+ dwc2_dbg(dwc2, "%s(%p)\n", __func__, dwc2);
+
+ /* Wait for AHB master IDLE state. */
+ ret = dwc2_wait_bit_set(dwc2, GRSTCTL, GRSTCTL_AHBIDLE, 10000);
+ if (ret) {
+ pr_info("%s: Timeout! Waiting for AHB master IDLE state\n",
+ __func__);
+ return ret;
+ }
+
+ /*
+ * If the current mode is host, either due to the force mode
+ * bit being set (which persists after core reset) or the
+ * connector id pin, a core soft reset will temporarily reset
+ * the mode to device. A delay from the IDDIG debounce filter
+ * will occur before going back to host mode.
+ *
+ * Determine whether we will go back into host mode after a
+ * reset and account for this delay after the reset.
+ */
+ {
+ u32 gotgctl = dwc2_readl(dwc2, GOTGCTL);
+ u32 gusbcfg = dwc2_readl(dwc2, GUSBCFG);
+
+ if (!(gotgctl & GOTGCTL_CONID_B) ||
+ (gusbcfg & GUSBCFG_FORCEHOSTMODE)) {
+ dwc2_dbg(dwc2, "HOST MODE\n");
+ wait_for_host_mode = true;
+ }
+ }
+ /* Core Soft Reset */
+ greset = dwc2_readl(dwc2, GRSTCTL);
+ greset |= GRSTCTL_CSFTRST;
+ dwc2_writel(dwc2, greset, GRSTCTL);
+
+ ret = dwc2_wait_bit_clear(dwc2, GRSTCTL, GRSTCTL_CSFTRST, 10000);
+ if (ret) {
+ pr_info("%s: Timeout! Waiting for Core Soft Reset\n", __func__);
+ return ret;
+ }
+
+ /*
+ * Wait for core to come out of reset.
+ * NOTE: This long sleep is _very_ important, otherwise the core will
+ * not stay in host mode after a connector ID change!
+ */
+ mdelay(100);
+
+ return 0;
+}
+
+/*
+ * This function initializes the DWC2 controller registers and
+ * prepares the core for device mode or host mode operation.
+ *
+ * @param regs Programming view of the DWC2 controller
+ */
+void dwc2_core_init(struct dwc2 *dwc2)
+{
+ uint32_t otgctl = 0;
+ uint32_t usbcfg = 0;
+ int retval;
+
+ dwc2_dbg(dwc2, "%s(%p)\n", __func__, dwc2);
+
+ /* Common Initialization */
+ usbcfg = dwc2_readl(dwc2, GUSBCFG);
+
+ /* Set ULPI External VBUS bit if needed */
+ usbcfg &= ~GUSBCFG_ULPI_EXT_VBUS_DRV;
+ if (dwc2->params.phy_ulpi_ext_vbus)
+ usbcfg |= GUSBCFG_ULPI_EXT_VBUS_DRV;
+
+ /* Set external TS Dline pulsing bit if needed */
+ usbcfg &= ~GUSBCFG_TERMSELDLPULSE;
+ if (dwc2->params.ts_dline)
+ usbcfg |= GUSBCFG_TERMSELDLPULSE;
+
+ dwc2_writel(dwc2, usbcfg, GUSBCFG);
+
+ /* Reset the Controller */
+ dwc2_core_reset(dwc2);
+
+ /*
+ * This programming sequence needs to happen in FS mode before
+ * any other programming occurs
+ */
+ retval = dwc2_phy_init(dwc2, true);
+ if (retval)
+ return;
+
+ /* Program the GAHBCFG Register */
+ retval = dwc2_gahbcfg_init(dwc2);
+ if (retval)
+ return;
+
+ /* Program the GUSBCFG register */
+ dwc2_gusbcfg_init(dwc2);
+
+ /* Program the GOTGCTL register */
+ otgctl = dwc2_readl(dwc2, GOTGCTL);
+ otgctl &= ~GOTGCTL_OTGVER;
+ dwc2_writel(dwc2, otgctl, GOTGCTL);
+
+ if (dwc2_is_host_mode(dwc2))
+ dwc2_dbg(dwc2, "Host Mode\n");
+ else
+ dwc2_dbg(dwc2, "Device Mode\n");
+}
diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h
new file mode 100644
index 000000000..0c89217c5
--- /dev/null
+++ b/drivers/usb/dwc2/core.h
@@ -0,0 +1,546 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/* Maximum number of Endpoints/HostChannels */
+#define DWC2_MAX_EPS_CHANNELS 16
+
+/**
+ * struct dwc2_core_params - Parameters for configuring the core
+ *
+ * @otg_cap: Specifies the OTG capabilities.
+ * 0 - HNP and SRP capable
+ * 1 - SRP Only capable
+ * 2 - No HNP/SRP capable (always available)
+ * Defaults to best available option (0, 1, then 2)
+ * @host_dma: Specifies whether to use slave or DMA mode for accessing
+ * the data FIFOs. The driver will automatically detect the
+ * value for this parameter if none is specified.
+ * 0 - Slave (always available)
+ * 1 - DMA (default, if available)
+ * @dma_desc_enable: When DMA mode is enabled, specifies whether to use
+ * address DMA mode or descriptor DMA mode for accessing
+ * the data FIFOs. The driver will automatically detect the
+ * value for this if none is specified.
+ * 0 - Address DMA
+ * 1 - Descriptor DMA (default, if available)
+ * @dma_desc_fs_enable: When DMA mode is enabled, specifies whether to use
+ * address DMA mode or descriptor DMA mode for accessing
+ * the data FIFOs in Full Speed mode only. The driver
+ * will automatically detect the value for this if none is
+ * specified.
+ * 0 - Address DMA
+ * 1 - Descriptor DMA in FS (default, if available)
+ * @speed: Specifies the maximum speed of operation in host and
+ * device mode. The actual speed depends on the speed of
+ * the attached device and the value of phy_type.
+ * 0 - High Speed
+ * (default when phy_type is UTMI+ or ULPI)
+ * 1 - Full Speed
+ * (default when phy_type is Full Speed)
+ * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
+ * 1 - Allow dynamic FIFO sizing (default, if available)
+ * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
+ * are enabled for non-periodic IN endpoints in device
+ * mode.
+ * @host_rx_fifo_size: Number of 4-byte words in the Rx FIFO in host mode when
+ * dynamic FIFO sizing is enabled
+ * 16 to 32768
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
+ * in host mode when dynamic FIFO sizing is enabled
+ * 16 to 32768
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
+ * host mode when dynamic FIFO sizing is enabled
+ * 16 to 32768
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @max_transfer_size: The maximum transfer size supported, in bytes
+ * 2047 to 65,535
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @max_packet_count: The maximum number of packets in a transfer
+ * 15 to 511
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @host_channels: The number of host channel registers to use
+ * 1 to 16
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @phy_type: Specifies the type of PHY interface to use. By default,
+ * the driver will automatically detect the phy_type.
+ * 0 - Full Speed Phy
+ * 1 - UTMI+ Phy
+ * 2 - ULPI Phy
+ * Defaults to best available option (2, 1, then 0)
+ * @phy_utmi_width: Specifies the UTMI+ Data Width (in bits). This parameter
+ * is applicable for a phy_type of UTMI+ or ULPI. (For a
+ * ULPI phy_type, this parameter indicates the data width
+ * between the MAC and the ULPI Wrapper.) Also, this
+ * parameter is applicable only if the OTG_HSPHY_WIDTH cC
+ * parameter was set to "8 and 16 bits", meaning that the
+ * core has been configured to work at either data path
+ * width.
+ * 8 or 16 (default 16 if available)
+ * @phy_ulpi_ddr: Specifies whether the ULPI operates at double or single
+ * data rate. This parameter is only applicable if phy_type
+ * is ULPI.
+ * 0 - single data rate ULPI interface with 8 bit wide
+ * data bus (default)
+ * 1 - double data rate ULPI interface with 4 bit wide
+ * data bus
+ * @phy_ulpi_ext_vbus: For a ULPI phy, specifies whether to use the internal or
+ * external supply to drive the VBus
+ * 0 - Internal supply (default)
+ * 1 - External supply
+ * @i2c_enable: Specifies whether to use the I2Cinterface for a full
+ * speed PHY. This parameter is only applicable if phy_type
+ * is FS.
+ * 0 - No (default)
+ * 1 - Yes
+ * @ipg_isoc_en: Indicates the IPG supports is enabled or disabled.
+ * 0 - Disable (default)
+ * 1 - Enable
+ * @acg_enable: For enabling Active Clock Gating in the controller
+ * 0 - No
+ * 1 - Yes
+ * @ulpi_fs_ls: Make ULPI phy operate in FS/LS mode only
+ * 0 - No (default)
+ * 1 - Yes
+ * @host_support_fs_ls_low_power: Specifies whether low power mode is supported
+ * when attached to a Full Speed or Low Speed device in
+ * host mode.
+ * 0 - Don't support low power mode (default)
+ * 1 - Support low power mode
+ * @host_ls_low_power_phy_clk: Specifies the PHY clock rate in low power mode
+ * when connected to a Low Speed device in host
+ * mode. This parameter is applicable only if
+ * host_support_fs_ls_low_power is enabled.
+ * 0 - 48 MHz
+ * (default when phy_type is UTMI+ or ULPI)
+ * 1 - 6 MHz
+ * (default when phy_type is Full Speed)
+ * @oc_disable: Flag to disable overcurrent condition.
+ * 0 - Allow overcurrent condition to get detected
+ * 1 - Disable overcurrent condtion to get detected
+ * @ts_dline: Enable Term Select Dline pulsing
+ * 0 - No (default)
+ * 1 - Yes
+ * @reload_ctl: Allow dynamic reloading of HFIR register during runtime
+ * 0 - No (default for core < 2.92a)
+ * 1 - Yes (default for core >= 2.92a)
+ * @ahbcfg: This field allows the default value of the GAHBCFG
+ * register to be overridden
+ * -1 - GAHBCFG value will be set to 0x06
+ * (INCR, default)
+ * all others - GAHBCFG value will be overridden with
+ * this value
+ * Not all bits can be controlled like this, the
+ * bits defined by GAHBCFG_CTRL_MASK are controlled
+ * by the driver and are ignored in this
+ * configuration value.
+ * @uframe_sched: True to enable the microframe scheduler
+ * @external_id_pin_ctl: Specifies whether ID pin is handled externally.
+ * Disable CONIDSTSCHNG controller interrupt in such
+ * case.
+ * 0 - No (default)
+ * 1 - Yes
+ * @power_down: Specifies whether the controller support power_down.
+ * If power_down is enabled, the controller will enter
+ * power_down in both peripheral and host mode when
+ * needed.
+ * 0 - No (default)
+ * 1 - Partial power down
+ * 2 - Hibernation
+ * @lpm: Enable LPM support.
+ * 0 - No
+ * 1 - Yes
+ * @lpm_clock_gating: Enable core PHY clock gating.
+ * 0 - No
+ * 1 - Yes
+ * @besl: Enable LPM Errata support.
+ * 0 - No
+ * 1 - Yes
+ * @hird_threshold_en: HIRD or HIRD Threshold enable.
+ * 0 - No
+ * 1 - Yes
+ * @hird_threshold: Value of BESL or HIRD Threshold.
+ * @activate_stm_fs_transceiver: Activate internal transceiver using GGPIO
+ * register.
+ * 0 - Deactivate the transceiver (default)
+ * 1 - Activate the transceiver
+ * @g_dma: Enables gadget dma usage (default: autodetect).
+ * @g_dma_desc: Enables gadget descriptor DMA (default: autodetect).
+ * @g_rx_fifo_size: The periodic rx fifo size for the device, in
+ * DWORDS from 16-32768 (default: 2048 if
+ * possible, otherwise autodetect).
+ * @g_np_tx_fifo_size: The non-periodic tx fifo size for the device in
+ * DWORDS from 16-32768 (default: 1024 if
+ * possible, otherwise autodetect).
+ * @g_tx_fifo_size: An array of TX fifo sizes in dedicated fifo
+ * mode. Each value corresponds to one EP
+ * starting from EP1 (max 15 values). Sizes are
+ * in DWORDS with possible values from from
+ * 16-32768 (default: 256, 256, 256, 256, 768,
+ * 768, 768, 768, 0, 0, 0, 0, 0, 0, 0).
+ * @change_speed_quirk: Change speed configuration to DWC2_SPEED_PARAM_FULL
+ * while full&low speed device connect. And change speed
+ * back to DWC2_SPEED_PARAM_HIGH while device is gone.
+ * 0 - No (default)
+ * 1 - Yes
+ *
+ * The following parameters may be specified when starting the module. These
+ * parameters define how the DWC_otg controller should be configured. A
+ * value of -1 (or any other out of range value) for any parameter means
+ * to read the value from hardware (if possible) or use the builtin
+ * default described above.
+ */
+struct dwc2_core_params {
+ u8 otg_cap;
+#define DWC2_CAP_PARAM_HNP_SRP_CAPABLE 0
+#define DWC2_CAP_PARAM_SRP_ONLY_CAPABLE 1
+#define DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE 2
+
+ u8 phy_type;
+#define DWC2_PHY_TYPE_PARAM_FS 0
+#define DWC2_PHY_TYPE_PARAM_UTMI 1
+#define DWC2_PHY_TYPE_PARAM_ULPI 2
+
+ u8 speed;
+#define DWC2_SPEED_PARAM_HIGH 0
+#define DWC2_SPEED_PARAM_FULL 1
+#define DWC2_SPEED_PARAM_LOW 2
+
+ u8 phy_utmi_width;
+ bool phy_ulpi_ddr;
+ bool phy_ulpi_ext_vbus;
+ bool phy_ulpi_ext_vbus_ind;
+ bool phy_ulpi_ext_vbus_ind_complement;
+ bool phy_ulpi_ext_vbus_ind_passthrough;
+
+ bool enable_dynamic_fifo;
+ bool en_multiple_tx_fifo;
+ bool i2c_enable;
+ bool acg_enable;
+ bool ulpi_fs_ls;
+ bool ts_dline;
+ bool reload_ctl;
+ bool uframe_sched;
+ bool external_id_pin_ctl;
+
+ int power_down;
+#define DWC2_POWER_DOWN_PARAM_NONE 0
+#define DWC2_POWER_DOWN_PARAM_PARTIAL 1
+#define DWC2_POWER_DOWN_PARAM_HIBERNATION 2
+
+ bool lpm;
+ bool lpm_clock_gating;
+ bool besl;
+ bool hird_threshold_en;
+ u8 hird_threshold;
+ bool activate_stm_fs_transceiver;
+ bool ipg_isoc_en;
+ u16 max_packet_count;
+ u32 max_transfer_size;
+ u32 ahbcfg;
+
+ bool dma;
+ bool dma_desc;
+
+ /* Host parameters */
+ bool host_support_fs_ls_low_power;
+ bool host_ls_low_power_phy_clk;
+
+ u8 host_channels;
+ u16 host_rx_fifo_size;
+ u16 host_nperio_tx_fifo_size;
+ u16 host_perio_tx_fifo_size;
+
+ /* Gadget parameters */
+ u32 g_rx_fifo_size;
+ u32 g_np_tx_fifo_size;
+ u32 g_tx_fifo_size[DWC2_MAX_EPS_CHANNELS];
+
+ bool change_speed_quirk;
+};
+
+/**
+ * struct dwc2_hw_params - Autodetected parameters.
+ *
+ * These parameters are the various parameters read from hardware
+ * registers during initialization. They typically contain the best
+ * supported or maximum value that can be configured in the
+ * corresponding dwc2_core_params value.
+ *
+ * The values that are not in dwc2_core_params are documented below.
+ *
+ * @op_mode: Mode of Operation
+ * 0 - HNP- and SRP-Capable OTG (Host & Device)
+ * 1 - SRP-Capable OTG (Host & Device)
+ * 2 - Non-HNP and Non-SRP Capable OTG (Host & Device)
+ * 3 - SRP-Capable Device
+ * 4 - Non-OTG Device
+ * 5 - SRP-Capable Host
+ * 6 - Non-OTG Host
+ * @arch: Architecture
+ * 0 - Slave only
+ * 1 - External DMA
+ * 2 - Internal DMA
+ * @ipg_isoc_en: This feature indicates that the controller supports
+ * the worst-case scenario of Rx followed by Rx
+ * Interpacket Gap (IPG) (32 bitTimes) as per the utmi
+ * specification for any token following ISOC OUT token.
+ * 0 - Don't support
+ * 1 - Support
+ * @power_optimized: Are power optimizations enabled?
+ * @num_dev_ep: Number of device endpoints available
+ * @num_dev_in_eps: Number of device IN endpoints available
+ * @num_dev_perio_in_ep: Number of device periodic IN endpoints
+ * available
+ * @dev_token_q_depth: Device Mode IN Token Sequence Learning Queue
+ * Depth
+ * 0 to 30
+ * @host_perio_tx_q_depth:
+ * Host Mode Periodic Request Queue Depth
+ * 2, 4 or 8
+ * @nperio_tx_q_depth:
+ * Non-Periodic Request Queue Depth
+ * 2, 4 or 8
+ * @hs_phy_type: High-speed PHY interface type
+ * 0 - High-speed interface not supported
+ * 1 - UTMI+
+ * 2 - ULPI
+ * 3 - UTMI+ and ULPI
+ * @fs_phy_type: Full-speed PHY interface type
+ * 0 - Full speed interface not supported
+ * 1 - Dedicated full speed interface
+ * 2 - FS pins shared with UTMI+ pins
+ * 3 - FS pins shared with ULPI pins
+ * @total_fifo_size: Total internal RAM for FIFOs (bytes)
+ * @hibernation: Is hibernation enabled?
+ * @utmi_phy_data_width: UTMI+ PHY data width
+ * 0 - 8 bits
+ * 1 - 16 bits
+ * 2 - 8 or 16 bits
+ * @snpsid: Value from SNPSID register
+ * @dev_ep_dirs: Direction of device endpoints (GHWCFG1)
+ * @g_tx_fifo_size: Power-on values of TxFIFO sizes
+ * @dma_desc_enable: When DMA mode is enabled, specifies whether to use
+ * address DMA mode or descriptor DMA mode for accessing
+ * the data FIFOs. The driver will automatically detect the
+ * value for this if none is specified.
+ * 0 - Address DMA
+ * 1 - Descriptor DMA (default, if available)
+ * @enable_dynamic_fifo: 0 - Use coreConsultant-specified FIFO size parameters
+ * 1 - Allow dynamic FIFO sizing (default, if available)
+ * @en_multiple_tx_fifo: Specifies whether dedicated per-endpoint transmit FIFOs
+ * are enabled for non-periodic IN endpoints in device
+ * mode.
+ * @host_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
+ * in host mode when dynamic FIFO sizing is enabled
+ * 16 to 32768
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @host_perio_tx_fifo_size: Number of 4-byte words in the periodic Tx FIFO in
+ * host mode when dynamic FIFO sizing is enabled
+ * 16 to 32768
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @max_transfer_size: The maximum transfer size supported, in bytes
+ * 2047 to 65,535
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @max_packet_count: The maximum number of packets in a transfer
+ * 15 to 511
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @host_channels: The number of host channel registers to use
+ * 1 to 16
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @dev_nperio_tx_fifo_size: Number of 4-byte words in the non-periodic Tx FIFO
+ * in device mode when dynamic FIFO sizing is enabled
+ * 16 to 32768
+ * Actual maximum value is autodetected and also
+ * the default.
+ * @i2c_enable: Specifies whether to use the I2Cinterface for a full
+ * speed PHY. This parameter is only applicable if phy_type
+ * is FS.
+ * 0 - No (default)
+ * 1 - Yes
+ * @acg_enable: For enabling Active Clock Gating in the controller
+ * 0 - Disable
+ * 1 - Enable
+ * @lpm_mode: For enabling Link Power Management in the controller
+ * 0 - Disable
+ * 1 - Enable
+ * @rx_fifo_size: Number of 4-byte words in the Rx FIFO when dynamic
+ * FIFO sizing is enabled 16 to 32768
+ * Actual maximum value is autodetected and also
+ * the default.
+ */
+struct dwc2_hw_params {
+ unsigned op_mode:3;
+ unsigned arch:2;
+ unsigned dma_desc_enable:1;
+ unsigned enable_dynamic_fifo:1;
+ unsigned en_multiple_tx_fifo:1;
+ unsigned rx_fifo_size:16;
+ unsigned host_nperio_tx_fifo_size:16;
+ unsigned dev_nperio_tx_fifo_size:16;
+ unsigned host_perio_tx_fifo_size:16;
+ unsigned nperio_tx_q_depth:3;
+ unsigned host_perio_tx_q_depth:3;
+ unsigned dev_token_q_depth:5;
+ unsigned max_transfer_size:26;
+ unsigned max_packet_count:11;
+ unsigned host_channels:5;
+ unsigned hs_phy_type:2;
+ unsigned fs_phy_type:2;
+ unsigned i2c_enable:1;
+ unsigned acg_enable:1;
+ unsigned num_dev_ep:4;
+ unsigned num_dev_in_eps:4;
+ unsigned num_dev_perio_in_ep:4;
+ unsigned total_fifo_size:16;
+ unsigned power_optimized:1;
+ unsigned hibernation:1;
+ unsigned utmi_phy_data_width:2;
+ unsigned lpm_mode:1;
+ unsigned ipg_isoc_en:1;
+ u32 snpsid;
+ u32 dev_ep_dirs;
+ u32 g_tx_fifo_size[DWC2_MAX_EPS_CHANNELS];
+};
+
+#define MAX_DEVICE 16
+#define MAX_ENDPOINT DWC2_MAX_EPS_CHANNELS
+
+struct dwc2 {
+ struct device_d *dev;
+ struct usb_host host;
+ struct usb_gadget gadget;
+ struct dwc2_hw_params hw_params;
+ struct dwc2_core_params params;
+
+ u8 in_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
+ u8 out_data_toggle[MAX_DEVICE][MAX_ENDPOINT];
+ void __iomem *regs;
+ int root_hub_devnum;
+
+ enum usb_dr_mode dr_mode;
+};
+
+#define host_to_dwc2(ptr) container_of(ptr, struct dwc2, host)
+#define gadget_to_dwc2(ptr) container_of(ptr, struct dwc2, gadget)
+
+#define dwc2_err(d, arg...) dev_err((d)->dev, ## arg)
+#define dwc2_warn(d, arg...) dev_err((d)->dev, ## arg)
+#define dwc2_info(d, arg...) dev_info((d)->dev, ## arg)
+#define dwc2_dbg(d, arg...) dev_dbg((d)->dev, ## arg)
+#define dwc2_vdbg(d, arg...) dev_vdbg((d)->dev, ## arg)
+
+static inline u32 dwc2_readl(struct dwc2 *dwc2, u32 offset)
+{
+ u32 val;
+
+ val = readl(dwc2->regs + offset);
+
+ return val;
+}
+
+static inline void dwc2_writel(struct dwc2 *dwc2, u32 value, u32 offset)
+{
+ writel(value, dwc2->regs + offset);
+}
+
+/**
+ * dwc2_wait_bit_set - Waits for bit to be set.
+ * @dwc2: Programming view of DWC2 controller.
+ * @offset: Register's offset where bit/bits must be set.
+ * @mask: Mask of the bit/bits which must be set.
+ * @timeout: Timeout to wait.
+ *
+ * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
+ */
+static inline int dwc2_wait_bit_set(struct dwc2 *dwc2, u32 offset, u32 mask,
+ u32 timeout)
+{
+ u32 i;
+
+ for (i = 0; i < timeout; i++) {
+ if (dwc2_readl(dwc2, offset) & mask)
+ return 0;
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/**
+ * dwc2_wait_bit_clear - Waits for bit to be clear.
+ * @dwc2: Programming view of DWC2 controller.
+ * @offset: Register's offset where bit/bits must be set.
+ * @mask: Mask of the bit/bits which must be set.
+ * @timeout: Timeout to wait.
+ *
+ * Return: 0 if bit/bits are set or -ETIMEDOUT in case of timeout.
+ */
+static inline int dwc2_wait_bit_clear(struct dwc2 *dwc2, u32 offset, u32 mask,
+ u32 timeout)
+{
+ u32 i;
+
+ for (i = 0; i < timeout; i++) {
+ if (!(dwc2_readl(dwc2, offset) & mask))
+ return 0;
+ udelay(1);
+ }
+
+ return -ETIMEDOUT;
+}
+
+/*
+ * Returns the mode of operation, host or device
+ */
+static inline int dwc2_is_host_mode(struct dwc2 *dwc2)
+{
+ return (dwc2_readl(dwc2, GINTSTS) & GINTSTS_CURMODE_HOST) != 0;
+}
+
+static inline int dwc2_is_device_mode(struct dwc2 *dwc2)
+{
+ return (dwc2_readl(dwc2, GINTSTS) & GINTSTS_CURMODE_HOST) == 0;
+}
+
+static inline int phy_read(struct dwc2 *dwc2, u8 addr)
+{
+ u32 gpvndctl = 0;
+
+ gpvndctl |= (addr & 0x3f) << GPVNDCTL_REGADDR_SHIFT;
+ gpvndctl &= ~GPVNDCTL_REGWR; /* read */
+ gpvndctl |= GPVNDCTL_NEWREGREQ;
+
+ dwc2_writel(dwc2, gpvndctl, GPVNDCTL);
+
+ if (dwc2_wait_bit_set(dwc2, GPVNDCTL, GPVNDCTL_VSTSDONE, 10000))
+ pr_err("Timeout: Waiting for phy read to complete\n");
+
+ gpvndctl = dwc2_readl(dwc2, GPVNDCTL) >> GPVNDCTL_REGDATA_SHIFT;
+ return gpvndctl & GPVNDCTL_REGDATA_MASK;
+}
+
+static inline void phy_write(struct dwc2 *dwc2, u8 val, u8 addr)
+{
+ u32 gpvndctl = 0;
+
+ gpvndctl |= (addr & 0x3f) << GPVNDCTL_REGADDR_SHIFT;
+ gpvndctl |= (val & 0xff) << GPVNDCTL_REGDATA_SHIFT;
+ gpvndctl |= GPVNDCTL_REGWR; /* write */
+ gpvndctl |= GPVNDCTL_NEWREGREQ;
+
+ dwc2_writel(dwc2, gpvndctl, GPVNDCTL);
+
+ if (dwc2_wait_bit_set(dwc2, GPVNDCTL, GPVNDCTL_VSTSDONE, 10000))
+ pr_err("Timeout: Waiting for phy write to complete\n");
+}
diff --git a/drivers/usb/dwc2/dwc2.c b/drivers/usb/dwc2/dwc2.c
new file mode 100644
index 000000000..893f573bc
--- /dev/null
+++ b/drivers/usb/dwc2/dwc2.c
@@ -0,0 +1,101 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2012 Oleksandr Tymoshenko <gonzo@freebsd.org>
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ *
+ * Copied from u-Boot
+ */
+
+#define DEBUG
+
+#include <common.h>
+#include <of.h>
+#include <dma.h>
+#include <init.h>
+#include <errno.h>
+#include <driver.h>
+#include <linux/clk.h>
+
+#include "dwc2.h"
+
+static void dwc2_uninit_common(struct dwc2 *dwc2)
+{
+ uint32_t hprt0;
+
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+
+ /* Put everything in reset. */
+ hprt0 &= ~(HPRT0_ENA | HPRT0_ENACHG | HPRT0_CONNDET | HPRT0_OVRCURRCHG);
+ hprt0 |= HPRT0_RST;
+
+ dwc2_writel(dwc2, hprt0, HPRT0);
+}
+
+static int dwc2_probe(struct device_d *dev)
+{
+ struct resource *iores;
+ struct usb_host *host;
+ struct dwc2 *dwc2;
+ int retval;
+
+ dwc2 = xzalloc(sizeof(struct dwc2));
+ dev->priv = dwc2;
+ dwc2->dev = dev;
+
+ iores = dev_request_mem_resource(dev, 0);
+ if (IS_ERR(iores))
+ return PTR_ERR(iores);
+ dwc2->regs = IOMEM(iores->start);
+
+ retval = dwc2_core_snpsid(dwc2);
+ if (retval)
+ goto error;
+
+ /*
+ * Reset before dwc2_get_hwparams() then it could get power-on real
+ * reset value form registers.
+ */
+ retval = dwc2_core_reset(dwc2);
+ if (retval)
+ goto error;
+
+ /* Detect config values from hardware */
+ dwc2_get_hwparams(dwc2);
+
+ dwc2_set_default_params(dwc2);
+
+ dma_set_mask(dev, DMA_BIT_MASK(32));
+
+ host = &dwc2->host;
+ host->hw_dev = dev;
+ host->init = dwc2_host_init;
+ host->submit_bulk_msg = dwc2_submit_bulk_msg;
+ host->submit_control_msg = dwc2_submit_control_msg;
+ host->submit_int_msg = dwc2_submit_int_msg;
+ retval = usb_register_host(host);
+
+error:
+ return retval;
+}
+
+static void dwc2_remove(struct device_d *dev)
+{
+ struct dwc2 *dwc2 = dev->priv;
+
+ dwc2_uninit_common(dwc2);
+}
+
+static const struct of_device_id dwc2_platform_dt_ids[] = {
+ { .compatible = "brcm,bcm2835-usb", },
+ { .compatible = "brcm,bcm2708-usb", },
+ { .compatible = "snps,dwc2", },
+ { }
+};
+
+static struct driver_d dwc2_driver = {
+ .name = "dwc2",
+ .probe = dwc2_probe,
+ .remove = dwc2_remove,
+ .of_compatible = DRV_OF_COMPAT(dwc2_platform_dt_ids),
+};
+device_platform_driver(dwc2_driver);
diff --git a/drivers/usb/dwc2/dwc2.h b/drivers/usb/dwc2/dwc2.h
new file mode 100644
index 000000000..0ac4b40fc
--- /dev/null
+++ b/drivers/usb/dwc2/dwc2.h
@@ -0,0 +1,41 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+#include <usb/usb.h>
+#include <usb/usb_defs.h>
+#include <usb/gadget.h>
+
+#include "regs.h"
+#include "core.h"
+
+/* Core functions */
+void dwc2_set_param_otg_cap(struct dwc2 *dwc2);
+void dwc2_set_param_phy_type(struct dwc2 *dwc2);
+void dwc2_set_param_speed(struct dwc2 *dwc2);
+void dwc2_set_param_phy_utmi_width(struct dwc2 *dwc2);
+void dwc2_set_default_params(struct dwc2 *dwc2);
+int dwc2_core_snpsid(struct dwc2 *dwc2);
+void dwc2_get_hwparams(struct dwc2 *dwc2);
+
+void dwc2_init_fs_ls_pclk_sel(struct dwc2 *dwc2);
+void dwc2_flush_all_fifo(struct dwc2 *dwc2);
+
+int dwc2_phy_init(struct dwc2 *dwc2, bool select_phy);
+int dwc2_gahbcfg_init(struct dwc2 *dwc2);
+void dwc2_gusbcfg_init(struct dwc2 *dwc2);
+
+int dwc2_core_reset(struct dwc2 *dwc2);
+void dwc2_core_init(struct dwc2 *dwc2);
+
+/* Host functions */
+int dwc2_submit_control_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len,
+ struct devrequest *setup, int timeout);
+int dwc2_submit_bulk_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, int timeout);
+int dwc2_submit_int_msg(struct usb_device *dev, unsigned long pipe,
+ void *buffer, int transfer_len, int interval);
+int dwc2_host_init(struct usb_host *host);
+
+int dwc2_submit_rh_msg(struct dwc2 *dwc2, struct usb_device *dev,
+ unsigned long pipe, void *buf, int len,
+ struct devrequest *setup);
+
diff --git a/drivers/usb/dwc2/host.c b/drivers/usb/dwc2/host.c
new file mode 100644
index 000000000..d66c70fbc
--- /dev/null
+++ b/drivers/usb/dwc2/host.c
@@ -0,0 +1,617 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <dma.h>
+#include "dwc2.h"
+
+#define to_dwc2 host_to_dwc2
+
+/* Use only HC channel 0. */
+#define DWC2_HC_CHANNEL 0
+
+static int dwc2_eptype[] = {
+ DXEPCTL_EPTYPE_ISO,
+ DXEPCTL_EPTYPE_INTERRUPT,
+ DXEPCTL_EPTYPE_CONTROL,
+ DXEPCTL_EPTYPE_BULK,
+};
+
+static int dwc2_do_split(struct dwc2 *dwc2, struct usb_device *dev)
+{
+ uint32_t hprt0 = dwc2_readl(dwc2, HPRT0);
+ uint32_t prtspd = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+
+ return prtspd == HPRT0_SPD_HIGH_SPEED && dev->speed != USB_SPEED_HIGH;
+}
+
+static void dwc2_host_hub_info(struct dwc2 *dwc2, struct usb_device *dev,
+ uint8_t *hub_addr, uint8_t *hub_port)
+{
+ *hub_addr = dev->devnum;
+ *hub_port = dev->portnr;
+
+ for (; dev->parent; dev = dev->parent) {
+ if (dev->parent->descriptor->bDeviceClass == USB_CLASS_HUB) {
+ *hub_addr = dev->parent->devnum;
+ *hub_port = dev->parent->portnr;
+ break;
+ }
+ }
+}
+
+static void dwc2_hc_init_split(struct dwc2 *dwc2, struct usb_device *dev,
+ uint8_t hc)
+{
+ uint8_t hub_addr, hub_port;
+ uint32_t hcsplt = 0;
+
+ dwc2_host_hub_info(dwc2, dev, &hub_addr, &hub_port);
+
+ hcsplt = HCSPLT_SPLTENA;
+ hcsplt |= hub_addr << HCSPLT_HUBADDR_SHIFT;
+ hcsplt |= hub_port << HCSPLT_PRTADDR_SHIFT;
+
+ /* Program the HCSPLIT register for SPLITs */
+ dwc2_writel(dwc2, hcsplt, HCSPLT(hc));
+}
+
+static void dwc2_hc_enable_ints(struct dwc2 *dwc2, uint8_t hc)
+{
+ uint32_t intmsk;
+ uint32_t hcintmsk = HCINTMSK_CHHLTD;
+
+ dwc2_writel(dwc2, hcintmsk, HCINTMSK(hc));
+
+ /* Enable the top level host channel interrupt */
+ intmsk = dwc2_readl(dwc2, HAINTMSK);
+ intmsk |= 1 << hc;
+ dwc2_writel(dwc2, intmsk, HAINTMSK);
+
+ /* Make sure host channel interrupts are enabled */
+ intmsk = dwc2_readl(dwc2, GINTMSK);
+ intmsk |= GINTSTS_HCHINT;
+ dwc2_writel(dwc2, intmsk, GINTMSK);
+}
+
+/**
+ * Prepares a host channel for transferring packets to/from a specific
+ * endpoint. The HCCHARn register is set up with the characteristics specified
+ * in _hc. Host channel interrupts that may need to be serviced while this
+ * transfer is in progress are enabled.
+ *
+ * @param regs Programming view of DWC2 controller
+ * @param hc Information needed to initialize the host channel
+ */
+static void dwc2_hc_init(struct dwc2 *dwc2, uint8_t hc,
+ struct usb_device *dev, uint8_t dev_addr, uint8_t ep_num,
+ uint8_t ep_is_in, uint32_t ep_type, uint16_t max_packet)
+{
+ uint32_t hcchar = (dev_addr << HCCHAR_DEVADDR_SHIFT) |
+ (ep_num << HCCHAR_EPNUM_SHIFT) |
+ (ep_is_in ? HCCHAR_EPDIR : 0) |
+ ep_type |
+ (max_packet << HCCHAR_MPS_SHIFT);
+
+ if (dev->speed == USB_SPEED_LOW)
+ hcchar |= HCCHAR_LSPDDEV;
+
+ /* Clear old interrupt conditions for this dwc2 channel */
+ dwc2_writel(dwc2, ~HCINTMSK_RESERVED14_31, HCINT(hc));
+
+ /* Enable channel interrupts required for this transfer */
+ dwc2_hc_enable_ints(dwc2, hc);
+
+ /*
+ * Program the HCCHARn register with the endpoint characteristics
+ * for the current transfer.
+ */
+ dwc2_writel(dwc2, hcchar, HCCHAR(hc));
+
+ /* Program the HCSPLIT register, default to no SPLIT */
+ dwc2_writel(dwc2, 0, HCSPLT(hc));
+}
+
+static int wait_for_chhltd(struct dwc2 *dwc2, u8 hc, uint32_t *sub, u8 *tgl)
+{
+ int ret;
+ uint32_t hcint, hctsiz;
+
+ ret = dwc2_wait_bit_set(dwc2, HCINT(hc), HCINTMSK_CHHLTD, 10000);
+ if (ret)
+ dwc2_err(dwc2, "%s: Timeout! Channel not halted\n", __func__);
+
+ hcint = dwc2_readl(dwc2, HCINT(hc));
+
+ if (hcint & HCINTMSK_AHBERR)
+ dwc2_err(dwc2, "%s: AHB error during internal DMA access\n",
+ __func__);
+
+ if (hcint & HCINTMSK_XFERCOMPL) {
+ hctsiz = dwc2_readl(dwc2, HCTSIZ(hc));
+ *sub = (hctsiz & TSIZ_XFERSIZE_MASK) >> TSIZ_XFERSIZE_SHIFT;
+ *tgl = (hctsiz & TSIZ_SC_MC_PID_MASK) >> TSIZ_SC_MC_PID_SHIFT;
+
+ dwc2_dbg(dwc2, "%s: HCINT=%08x sub=%u toggle=%d\n", __func__,
+ hcint, *sub, *tgl);
+ return 0;
+ }
+
+ if (hcint & (HCINTMSK_NAK | HCINTMSK_FRMOVRUN))
+ return -EAGAIN;
+
+ dwc2_dbg(dwc2, "%s: Unknown channel status: (HCINT=%08x)\n", __func__,
+ hcint);
+ return -EINVAL;
+}
+
+static int transfer_chunk(struct dwc2 *dwc2, u8 hc,
+ u8 *pid, int in, void *buffer, int num_packets,
+ int xfer_len, int *actual_len, int odd_frame)
+{
+ uint32_t hctsiz, hcchar, sub;
+ dma_addr_t dma_addr;
+ int ret = 0;
+
+ dma_addr = dma_map_single(dwc2->dev, buffer, xfer_len,
+ in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+
+ dwc2_dbg(dwc2, "chunk: pid=%d xfer_len=%u pkts=%u dma_addr=%llx\n",
+ *pid, xfer_len, num_packets, dma_addr);
+
+ if (!in)
+ dma_sync_single_for_device(dma_addr, xfer_len, DMA_TO_DEVICE);
+
+ dwc2_writel(dwc2, dma_addr, HCDMA(hc));
+
+ hctsiz = (xfer_len << TSIZ_XFERSIZE_SHIFT)
+ | (1 << TSIZ_PKTCNT_SHIFT)
+ | (*pid << TSIZ_SC_MC_PID_SHIFT);
+
+ dwc2_writel(dwc2, hctsiz, HCTSIZ(hc));
+
+ /* Clear old interrupt conditions for this dwc2 channel. */
+ dwc2_writel(dwc2, 0x3fff, HCINT(hc));
+
+ /* Set dwc2 channel enable after all other setup is complete. */
+ hcchar = dwc2_readl(dwc2, HCCHAR(hc));
+ hcchar &= ~(HCCHAR_MULTICNT_MASK | HCCHAR_CHDIS);
+ hcchar |= (1 << HCCHAR_MULTICNT_SHIFT) | HCCHAR_CHENA;
+ if (odd_frame)
+ hcchar |= HCCHAR_ODDFRM;
+ else
+ hcchar &= ~HCCHAR_ODDFRM;
+ dwc2_writel(dwc2, hcchar, HCCHAR(hc));
+
+ ret = wait_for_chhltd(dwc2, hc, &sub, pid);
+ if (ret < 0)
+ goto exit;
+
+ if (in) {
+ xfer_len -= sub;
+ dma_sync_single_for_cpu(dma_addr, xfer_len, DMA_FROM_DEVICE);
+ }
+ *actual_len = xfer_len;
+
+exit:
+ dma_unmap_single(dwc2->dev, dma_addr, xfer_len,
+ in ? DMA_FROM_DEVICE : DMA_TO_DEVICE);
+
+ return ret;
+}
+
+static int dwc2_submit_packet(struct dwc2 *dwc2, struct usb_device *dev,
+ unsigned long pipe, u8 *pid, int in, void *buf,
+ int len)
+{
+ int devnum = usb_pipedevice(pipe);
+ int ep = usb_pipeendpoint(pipe);
+ int mps = usb_maxpacket(dev, pipe);
+ int eptype = dwc2_eptype[usb_pipetype(pipe)];
+ int do_split = dwc2_do_split(dwc2, dev);
+ int complete_split = 0;
+ int done = 0;
+ int ret = 0;
+ uint32_t xfer_len;
+ uint32_t num_packets;
+ int stop_transfer = 0;
+ uint32_t max_xfer_len;
+ int ssplit_frame_num = 0;
+
+ max_xfer_len = dwc2->params.max_packet_count * mps;
+
+ if (max_xfer_len > dwc2->params.max_transfer_size)
+ max_xfer_len = dwc2->params.max_transfer_size;
+
+ /* Make sure that max_xfer_len is a multiple of max packet size. */
+ num_packets = max_xfer_len / mps;
+ max_xfer_len = num_packets * mps;
+
+ /* Initialize channel */
+ dwc2_hc_init(dwc2, DWC2_HC_CHANNEL, dev, devnum, ep, in, eptype, mps);
+
+ /* Check if the target is a FS/LS device behind a HS hub */
+ if (do_split) {
+ dwc2_hc_init_split(dwc2, dev, DWC2_HC_CHANNEL);
+ num_packets = 1;
+ max_xfer_len = mps;
+ }
+ do {
+ int actual_len = 0;
+ uint32_t hcint, hcsplt;
+ int odd_frame = 0;
+
+ xfer_len = len - done;
+
+ if (xfer_len > max_xfer_len)
+ xfer_len = max_xfer_len;
+ else if (xfer_len > mps)
+ num_packets = (xfer_len + mps - 1) / mps;
+ else
+ num_packets = 1;
+
+ if (complete_split || do_split) {
+ hcsplt = dwc2_readl(dwc2, HCSPLT(DWC2_HC_CHANNEL));
+ if (complete_split)
+ hcsplt |= HCSPLT_COMPSPLT;
+ else if (do_split)
+ hcsplt &= ~HCSPLT_COMPSPLT;
+ dwc2_writel(dwc2, hcsplt, HCSPLT(DWC2_HC_CHANNEL));
+ }
+
+ if (eptype == DXEPCTL_EPTYPE_INTERRUPT) {
+ int uframe_num = dwc2_readl(dwc2, HFNUM);
+
+ if (!(uframe_num & 0x1))
+ odd_frame = 1;
+ }
+
+ ret = transfer_chunk(dwc2, DWC2_HC_CHANNEL, pid,
+ in, (char *)buf + done, num_packets,
+ xfer_len, &actual_len, odd_frame);
+
+ hcint = dwc2_readl(dwc2, HCINT(DWC2_HC_CHANNEL));
+ if (complete_split) {
+ stop_transfer = 0;
+ if (hcint & HCINTMSK_NYET) {
+ int frame_num = HFNUM_MAX_FRNUM &
+ dwc2_readl(dwc2, HFNUM);
+
+ ret = 0;
+ if (((frame_num - ssplit_frame_num) &
+ HFNUM_MAX_FRNUM) > 4)
+ ret = -EAGAIN;
+ } else {
+ complete_split = 0;
+ }
+ } else if (do_split) {
+ if (hcint & HCINTMSK_ACK) {
+ ssplit_frame_num = HFNUM_MAX_FRNUM &
+ dwc2_readl(dwc2, HFNUM);
+ ret = 0;
+ complete_split = 1;
+ }
+ }
+
+ if (ret)
+ break;
+
+ if (actual_len < xfer_len)
+ stop_transfer = 1;
+
+ done += actual_len;
+
+ /* Transactions are done when when either all data is transferred or
+ * there is a short transfer. In case of a SPLIT make sure the CSPLIT
+ * is executed.
+ */
+ } while (((done < len) && !stop_transfer) || complete_split);
+
+ dwc2_writel(dwc2, 0, HCINTMSK(DWC2_HC_CHANNEL));
+ dwc2_writel(dwc2, 0xFFFFFFFF, HCINT(DWC2_HC_CHANNEL));
+
+ dev->status = 0;
+ dev->act_len = done;
+
+ return ret;
+}
+
+int dwc2_submit_control_msg(struct usb_device *udev,
+ unsigned long pipe, void *buffer, int len,
+ struct devrequest *setup, int timeout)
+{
+ struct usb_host *host = udev->host;
+ struct dwc2 *dwc2 = to_dwc2(host);
+ int devnum = usb_pipedevice(pipe);
+ int ret, act_len;
+ u8 pid;
+ /* For CONTROL endpoint pid should start with DATA1 */
+ int status_direction;
+
+ if (devnum == dwc2->root_hub_devnum) {
+ udev->status = 0;
+ udev->speed = USB_SPEED_HIGH;
+ return dwc2_submit_rh_msg(dwc2, udev, pipe, buffer, len, setup);
+ }
+
+ /* SETUP stage */
+ pid = TSIZ_SC_MC_PID_SETUP;
+ do {
+ ret = dwc2_submit_packet(dwc2, udev, pipe, &pid, 0, setup, 8);
+ } while (ret == -EAGAIN);
+ if (ret)
+ return ret;
+
+ /* DATA stage */
+ act_len = 0;
+ if (buffer) {
+ pid = TSIZ_SC_MC_PID_DATA1;
+ do {
+ ret = dwc2_submit_packet(dwc2, udev, pipe, &pid,
+ usb_pipein(pipe), buffer, len);
+ act_len += udev->act_len;
+ buffer += udev->act_len;
+ len -= udev->act_len;
+ } while (ret == -EAGAIN);
+ if (ret)
+ return ret;
+ status_direction = usb_pipeout(pipe);
+ } else {
+ /* No-data CONTROL always ends with an IN transaction */
+ status_direction = 1;
+ }
+
+ /* STATUS stage */
+ pid = TSIZ_SC_MC_PID_DATA1;
+ do {
+ ret = dwc2_submit_packet(dwc2, udev, pipe, &pid,
+ status_direction, NULL, 0);
+ } while (ret == -EAGAIN);
+ if (ret)
+ return ret;
+
+ udev->act_len = act_len;
+
+ return 0;
+}
+
+int dwc2_submit_bulk_msg(struct usb_device *udev, unsigned long pipe,
+ void *buffer, int len, int timeout)
+{
+ struct usb_host *host = udev->host;
+ struct dwc2 *dwc2 = to_dwc2(host);
+ int devnum = usb_pipedevice(pipe);
+ int ep = usb_pipeendpoint(pipe);
+ int in = usb_pipein(pipe);
+ u8 *pid;
+
+ if ((devnum >= MAX_DEVICE) || (devnum == dwc2->root_hub_devnum)) {
+ udev->status = 0;
+ return -EINVAL;
+ }
+
+ if (in)
+ pid = &dwc2->in_data_toggle[devnum][ep];
+ else
+ pid = &dwc2->out_data_toggle[devnum][ep];
+
+ return dwc2_submit_packet(dwc2, udev, pipe, pid, in, buffer, len);
+}
+
+int dwc2_submit_int_msg(struct usb_device *udev, unsigned long pipe,
+ void *buffer, int len, int interval)
+{
+ struct usb_host *host = udev->host;
+ struct dwc2 *dwc2 = to_dwc2(host);
+ int devnum = usb_pipedevice(pipe);
+ int ep = usb_pipeendpoint(pipe);
+ int in = usb_pipein(pipe);
+ u8 *pid;
+ uint64_t start;
+ int ret;
+
+ if ((devnum >= MAX_DEVICE) || (devnum == dwc2->root_hub_devnum)) {
+ udev->status = 0;
+ return -EINVAL;
+ }
+
+ if (usb_pipein(pipe))
+ pid = &dwc2->in_data_toggle[devnum][ep];
+ else
+ pid = &dwc2->out_data_toggle[devnum][ep];
+
+ start = get_time_ns();
+
+ while (1) {
+ ret = dwc2_submit_packet(dwc2, udev, pipe, pid, in,
+ buffer, len);
+ if (ret != -EAGAIN)
+ return ret;
+ if (is_timeout(start, USB_CNTL_TIMEOUT * MSECOND)) {
+ dwc2_err(dwc2, "Timeout on interrupt endpoint\n");
+ return -ETIMEDOUT;
+ }
+ }
+}
+
+/*
+ * This function initializes the DWC2 controller registers for
+ * host mode.
+ *
+ * This function flushes the Tx and Rx FIFOs and it flushes any entries in the
+ * request queues. Host channels are reset to ensure that they are ready for
+ * performing transfers.
+ *
+ * @param dev USB Device (NULL if driver model is not being used)
+ * @param regs Programming view of DWC2 controller
+ *
+ */
+static void dwc2_core_host_init(struct device_d *dev,
+ struct dwc2 *dwc2)
+{
+ uint32_t nptxfifosize = 0;
+ uint32_t ptxfifosize = 0;
+ uint32_t hcchar, hcfg, hprt0, hotgctl, usbcfg;
+ int i, ret, num_channels;
+
+ dwc2_dbg(dwc2, "%s(%p)\n", __func__, dwc2);
+
+ /* Set HS/FS Timeout Calibration to 7 (max available value).
+ * The number of PHY clocks that the application programs in
+ * this field is added to the high/full speed interpacket timeout
+ * duration in the core to account for any additional delays
+ * introduced by the PHY. This can be required, because the delay
+ * introduced by the PHY in generating the linestate condition
+ * can vary from one PHY to another.
+ */
+ usbcfg = dwc2_readl(dwc2, GUSBCFG);
+ usbcfg |= GUSBCFG_TOUTCAL(7);
+ dwc2_writel(dwc2, usbcfg, GUSBCFG);
+
+ /* Restart the Phy Clock */
+ dwc2_writel(dwc2, 0, PCGCTL);
+
+ /* Initialize Host Configuration Register */
+ dwc2_init_fs_ls_pclk_sel(dwc2);
+ if (dwc2->params.speed == DWC2_SPEED_PARAM_FULL ||
+ dwc2->params.speed == DWC2_SPEED_PARAM_LOW) {
+ hcfg = dwc2_readl(dwc2, HCFG);
+ hcfg |= HCFG_FSLSSUPP;
+ dwc2_writel(dwc2, hcfg, HCFG);
+ }
+
+ if (dwc2->params.dma_desc) {
+ u32 op_mode = dwc2->hw_params.op_mode;
+
+ if (dwc2->hw_params.snpsid < DWC2_CORE_REV_2_90a ||
+ !dwc2->hw_params.dma_desc_enable ||
+ op_mode == GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE ||
+ op_mode == GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE ||
+ op_mode == GHWCFG2_OP_MODE_UNDEFINED) {
+ dwc2_err(dwc2, "Descriptor DMA not suppported\n");
+ dwc2_err(dwc2, "falling back to buffer DMA mode.\n");
+ dwc2->params.dma_desc = false;
+ } else {
+ hcfg = dwc2_readl(dwc2, HCFG);
+ hcfg |= HCFG_DESCDMA;
+ dwc2_writel(dwc2, hcfg, HCFG);
+ }
+ }
+
+ /* Configure data FIFO sizes */
+ if (dwc2_readl(dwc2, GHWCFG2) & GHWCFG2_DYNAMIC_FIFO) {
+ /* Rx FIFO */
+ dwc2_writel(dwc2, CONFIG_DWC2_HOST_RX_FIFO_SIZE, GRXFSIZ);
+
+ /* Non-periodic Tx FIFO */
+ nptxfifosize |= CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE <<
+ FIFOSIZE_DEPTH_SHIFT;
+ nptxfifosize |= CONFIG_DWC2_HOST_RX_FIFO_SIZE <<
+ FIFOSIZE_STARTADDR_SHIFT;
+ dwc2_writel(dwc2, nptxfifosize, GNPTXFSIZ);
+
+ /* Periodic Tx FIFO */
+ ptxfifosize |= CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE <<
+ FIFOSIZE_DEPTH_SHIFT;
+ ptxfifosize |= (CONFIG_DWC2_HOST_RX_FIFO_SIZE +
+ CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE) <<
+ FIFOSIZE_STARTADDR_SHIFT;
+ dwc2_writel(dwc2, ptxfifosize, HPTXFSIZ);
+ }
+
+ /* Clear Host Set HNP Enable in the OTG Control Register */
+ hotgctl = dwc2_readl(dwc2, GOTGCTL);
+ hotgctl &= ~GOTGCTL_HSTSETHNPEN;
+ dwc2_writel(dwc2, hotgctl, GOTGCTL);
+
+ /* Make sure the FIFOs are flushed. */
+ dwc2_flush_all_fifo(dwc2);
+
+ /* Flush out any leftover queued requests. */
+ num_channels = dwc2->params.host_channels;
+ for (i = 0; i < num_channels; i++) {
+ hcchar = dwc2_readl(dwc2, HCCHAR(i));
+ if (!(hcchar & HCCHAR_CHENA))
+ continue;
+ hcchar |= HCCHAR_CHDIS;
+ hcchar &= ~(HCCHAR_CHENA | HCCHAR_EPDIR);
+ dwc2_writel(dwc2, hcchar, HCCHAR(i));
+ }
+
+ /* Halt all channels to put them into a known state. */
+ for (i = 0; i < num_channels; i++) {
+ hcchar = dwc2_readl(dwc2, HCCHAR(i));
+ if (!(hcchar & HCCHAR_CHENA))
+ continue;
+ hcchar |= HCCHAR_CHENA | HCCHAR_CHDIS;
+ hcchar &= ~HCCHAR_EPDIR;
+
+ dwc2_writel(dwc2, hcchar, HCCHAR(i));
+ ret = dwc2_wait_bit_clear(dwc2, HCCHAR(i), HCCHAR_CHENA, 10000);
+ if (ret)
+ dwc2_warn(dwc2, "%s: Timeout! Reseting channel %d\n",
+ __func__, i);
+ }
+
+ /* Turn on the vbus power */
+ if (dwc2_is_host_mode(dwc2)) {
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET);
+ hprt0 &= ~(HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+ if (!(hprt0 & HPRT0_PWR)) {
+ hprt0 |= HPRT0_PWR;
+ dwc2_writel(dwc2, hprt0, HPRT0);
+ }
+ }
+
+ /* Disable all interrupts */
+ dwc2_writel(dwc2, 0, GINTMSK);
+ dwc2_writel(dwc2, 0, HAINTMSK);
+}
+
+int dwc2_host_init(struct usb_host *host)
+{
+ struct dwc2 *dwc2 = to_dwc2(host);
+ struct device_d *dev = dwc2->dev;
+ uint32_t hprt0, gusbcfg;
+ int i, j;
+
+ /* Force Host mode in case the dwc2 controller is otg,
+ * otherwise the mode selection is dictated by the id
+ * pin, thus will require a otg A cable to be plugged-in.
+ */
+ gusbcfg = dwc2_readl(dwc2, GUSBCFG) | GUSBCFG_FORCEHOSTMODE;
+ dwc2_writel(dwc2, gusbcfg, GUSBCFG);
+ mdelay(25);
+
+ dwc2_core_init(dwc2);
+ dwc2_core_host_init(dev, dwc2);
+
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET);
+ /* clear HPRT0_ENACHG and HPRT0_OVRCURRCHG by writing 1 */
+ hprt0 |= HPRT0_ENACHG | HPRT0_OVRCURRCHG;
+ hprt0 |= HPRT0_RST;
+ dwc2_writel(dwc2, hprt0, HPRT0);
+
+ mdelay(50);
+
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_RST);
+ dwc2_writel(dwc2, hprt0, HPRT0);
+
+ for (i = 0; i < MAX_DEVICE; i++) {
+ for (j = 0; j < MAX_ENDPOINT; j++) {
+ dwc2->in_data_toggle[i][j] = TSIZ_SC_MC_PID_DATA0;
+ dwc2->out_data_toggle[i][j] = TSIZ_SC_MC_PID_DATA0;
+ }
+ }
+
+ /*
+ * Add a 1 second delay here. This gives the host controller
+ * a bit time before the comminucation with the USB devices
+ * is started (the bus is scanned) and fixes the USB detection
+ * problems with some problematic USB keys.
+ */
+ if (dwc2_is_host_mode(dwc2))
+ mdelay(1000);
+
+ return 0;
+}
diff --git a/drivers/usb/dwc2/regs.h b/drivers/usb/dwc2/regs.h
new file mode 100644
index 000000000..b2b312e1b
--- /dev/null
+++ b/drivers/usb/dwc2/regs.h
@@ -0,0 +1,847 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (C) 2014 Marek Vasut <marex@denx.de>
+ */
+
+#ifndef __DWC2_H__
+#define __DWC2_H__
+
+#define HSOTG_REG(x) (x)
+
+#define GOTGCTL HSOTG_REG(0x000)
+#define GOTGCTL_CHIRPEN BIT(27)
+#define GOTGCTL_MULT_VALID_BC_MASK (0x1f << 22)
+#define GOTGCTL_MULT_VALID_BC_SHIFT 22
+#define GOTGCTL_CURMODE BIT(21) /* was missing wtf ? */
+#define GOTGCTL_OTGVER BIT(20)
+#define GOTGCTL_BSESVLD BIT(19)
+#define GOTGCTL_ASESVLD BIT(18)
+#define GOTGCTL_DBNC_SHORT BIT(17)
+#define GOTGCTL_CONID_B BIT(16)
+#define GOTGCTL_DBNCE_FLTR_BYPASS BIT(15)
+#define GOTGCTL_EMBHOSTEN BIT(12)
+#define GOTGCTL_DEVHNPEN BIT(11)
+#define GOTGCTL_HSTSETHNPEN BIT(10)
+#define GOTGCTL_HNPREQ BIT(9)
+#define GOTGCTL_HSTNEGSCS BIT(8)
+#define GOTGCTL_SESREQ BIT(1)
+#define GOTGCTL_SESREQSCS BIT(0)
+
+#define GOTGINT HSOTG_REG(0x004)
+#define GOTGINT_DBNCE_DONE BIT(19)
+#define GOTGINT_A_DEV_TOUT_CHG BIT(18)
+#define GOTGINT_HST_NEG_DET BIT(17)
+#define GOTGINT_HST_NEG_SUC_STS_CHNG BIT(9)
+#define GOTGINT_SES_REQ_SUC_STS_CHNG BIT(8)
+#define GOTGINT_SES_END_DET BIT(2)
+
+#define GAHBCFG HSOTG_REG(0x008)
+#define GAHBCFG_AHB_SINGLE BIT(23)
+#define GAHBCFG_NOTI_ALL_DMA_WRIT BIT(22)
+#define GAHBCFG_REM_MEM_SUPP BIT(21)
+#define GAHBCFG_P_TXF_EMP_LVL BIT(8)
+#define GAHBCFG_NP_TXF_EMP_LVL BIT(7)
+#define GAHBCFG_DMA_EN BIT(5)
+#define GAHBCFG_HBSTLEN_MASK (0xf << 1)
+#define GAHBCFG_HBSTLEN_SHIFT 1
+#define GAHBCFG_HBSTLEN_SINGLE 0
+#define GAHBCFG_HBSTLEN_INCR 1
+#define GAHBCFG_HBSTLEN_INCR4 3
+#define GAHBCFG_HBSTLEN_INCR8 5
+#define GAHBCFG_HBSTLEN_INCR16 7
+#define GAHBCFG_GLBL_INTR_EN BIT(0)
+#define GAHBCFG_CTRL_MASK (GAHBCFG_P_TXF_EMP_LVL | \
+ GAHBCFG_NP_TXF_EMP_LVL | \
+ GAHBCFG_DMA_EN | \
+ GAHBCFG_GLBL_INTR_EN)
+
+#define GUSBCFG HSOTG_REG(0x00C)
+#define GUSBCFG_FORCEDEVMODE BIT(30)
+#define GUSBCFG_FORCEHOSTMODE BIT(29)
+#define GUSBCFG_TXENDDELAY BIT(28)
+#define GUSBCFG_ICTRAFFICPULLREMOVE BIT(27)
+#define GUSBCFG_ICUSBCAP BIT(26)
+#define GUSBCFG_ULPI_INT_PROT_DIS BIT(25)
+#define GUSBCFG_INDICATORPASSTHROUGH BIT(24)
+#define GUSBCFG_INDICATORCOMPLEMENT BIT(23)
+#define GUSBCFG_TERMSELDLPULSE BIT(22)
+#define GUSBCFG_ULPI_EXT_VBUS_IND BIT(21)
+#define GUSBCFG_ULPI_EXT_VBUS_DRV BIT(20)
+#define GUSBCFG_ULPI_CLK_SUSP_M BIT(19)
+#define GUSBCFG_ULPI_AUTO_RES BIT(18)
+#define GUSBCFG_ULPI_FS_LS BIT(17)
+#define GUSBCFG_OTG_UTMI_FS_SEL BIT(16)
+#define GUSBCFG_PHY_LP_CLK_SEL BIT(15)
+#define GUSBCFG_USBTRDTIM_MASK (0xf << 10)
+#define GUSBCFG_USBTRDTIM_SHIFT 10
+#define GUSBCFG_HNPCAP BIT(9)
+#define GUSBCFG_SRPCAP BIT(8)
+#define GUSBCFG_DDRSEL BIT(7)
+#define GUSBCFG_PHYSEL BIT(6)
+#define GUSBCFG_FSINTF BIT(5)
+#define GUSBCFG_ULPI_UTMI_SEL BIT(4)
+#define GUSBCFG_PHYIF16 BIT(3)
+#define GUSBCFG_PHYIF8 (0 << 3)
+#define GUSBCFG_TOUTCAL_MASK (0x7 << 0)
+#define GUSBCFG_TOUTCAL_SHIFT 0
+#define GUSBCFG_TOUTCAL_LIMIT 0x7
+#define GUSBCFG_TOUTCAL(_x) ((_x) << 0)
+
+#define GRSTCTL HSOTG_REG(0x010)
+#define GRSTCTL_AHBIDLE BIT(31)
+#define GRSTCTL_DMAREQ BIT(30)
+#define GRSTCTL_TXFNUM_MASK (0x1f << 6)
+#define GRSTCTL_TXFNUM_SHIFT 6
+#define GRSTCTL_TXFNUM_LIMIT 0x1f
+#define GRSTCTL_TXFNUM(_x) ((_x) << 6)
+#define GRSTCTL_TXFFLSH BIT(5)
+#define GRSTCTL_RXFFLSH BIT(4)
+#define GRSTCTL_IN_TKNQ_FLSH BIT(3)
+#define GRSTCTL_FRMCNTRRST BIT(2)
+#define GRSTCTL_HSFTRST BIT(1)
+#define GRSTCTL_CSFTRST BIT(0)
+
+#define GINTSTS HSOTG_REG(0x014)
+#define GINTMSK HSOTG_REG(0x018)
+#define GINTSTS_WKUPINT BIT(31)
+#define GINTSTS_SESSREQINT BIT(30)
+#define GINTSTS_DISCONNINT BIT(29)
+#define GINTSTS_CONIDSTSCHNG BIT(28)
+#define GINTSTS_LPMTRANRCVD BIT(27)
+#define GINTSTS_PTXFEMP BIT(26)
+#define GINTSTS_HCHINT BIT(25)
+#define GINTSTS_PRTINT BIT(24)
+#define GINTSTS_RESETDET BIT(23)
+#define GINTSTS_FET_SUSP BIT(22)
+#define GINTSTS_INCOMPL_IP BIT(21)
+#define GINTSTS_INCOMPL_SOOUT BIT(21)
+#define GINTSTS_INCOMPL_SOIN BIT(20)
+#define GINTSTS_OEPINT BIT(19)
+#define GINTSTS_IEPINT BIT(18)
+#define GINTSTS_EPMIS BIT(17)
+#define GINTSTS_RESTOREDONE BIT(16)
+#define GINTSTS_EOPF BIT(15)
+#define GINTSTS_ISOUTDROP BIT(14)
+#define GINTSTS_ENUMDONE BIT(13)
+#define GINTSTS_USBRST BIT(12)
+#define GINTSTS_USBSUSP BIT(11)
+#define GINTSTS_ERLYSUSP BIT(10)
+#define GINTSTS_I2CINT BIT(9)
+#define GINTSTS_ULPI_CK_INT BIT(8)
+#define GINTSTS_GOUTNAKEFF BIT(7)
+#define GINTSTS_GINNAKEFF BIT(6)
+#define GINTSTS_NPTXFEMP BIT(5)
+#define GINTSTS_RXFLVL BIT(4)
+#define GINTSTS_SOF BIT(3)
+#define GINTSTS_OTGINT BIT(2)
+#define GINTSTS_MODEMIS BIT(1)
+#define GINTSTS_CURMODE_HOST BIT(0)
+
+#define GRXSTSR HSOTG_REG(0x01C)
+#define GRXSTSP HSOTG_REG(0x020)
+#define GRXSTS_FN_MASK (0x7f << 25)
+#define GRXSTS_FN_SHIFT 25
+#define GRXSTS_PKTSTS_MASK (0xf << 17)
+#define GRXSTS_PKTSTS_SHIFT 17
+#define GRXSTS_PKTSTS_GLOBALOUTNAK 1
+#define GRXSTS_PKTSTS_OUTRX 2
+#define GRXSTS_PKTSTS_HCHIN 2
+#define GRXSTS_PKTSTS_OUTDONE 3
+#define GRXSTS_PKTSTS_HCHIN_XFER_COMP 3
+#define GRXSTS_PKTSTS_SETUPDONE 4
+#define GRXSTS_PKTSTS_DATATOGGLEERR 5
+#define GRXSTS_PKTSTS_SETUPRX 6
+#define GRXSTS_PKTSTS_HCHHALTED 7
+#define GRXSTS_HCHNUM_MASK (0xf << 0)
+#define GRXSTS_HCHNUM_SHIFT 0
+#define GRXSTS_DPID_MASK (0x3 << 15)
+#define GRXSTS_DPID_SHIFT 15
+#define GRXSTS_BYTECNT_MASK (0x7ff << 4)
+#define GRXSTS_BYTECNT_SHIFT 4
+#define GRXSTS_EPNUM_MASK (0xf << 0)
+#define GRXSTS_EPNUM_SHIFT 0
+
+#define GRXFSIZ HSOTG_REG(0x024)
+#define GRXFSIZ_DEPTH_MASK (0xffff << 0)
+#define GRXFSIZ_DEPTH_SHIFT 0
+
+#define GNPTXFSIZ HSOTG_REG(0x028)
+/* Use FIFOSIZE_* constants to access this register */
+
+#define GNPTXSTS HSOTG_REG(0x02C)
+#define GNPTXSTS_NP_TXQ_TOP_MASK (0x7f << 24)
+#define GNPTXSTS_NP_TXQ_TOP_SHIFT 24
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_MASK (0xff << 16)
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_SHIFT 16
+#define GNPTXSTS_NP_TXQ_SPC_AVAIL_GET(_v) (((_v) >> 16) & 0xff)
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_MASK (0xffff << 0)
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_SHIFT 0
+#define GNPTXSTS_NP_TXF_SPC_AVAIL_GET(_v) (((_v) >> 0) & 0xffff)
+
+#define GI2CCTL HSOTG_REG(0x0030)
+#define GI2CCTL_BSYDNE BIT(31)
+#define GI2CCTL_RW BIT(30)
+#define GI2CCTL_I2CDATSE0 BIT(28)
+#define GI2CCTL_I2CDEVADDR_MASK (0x3 << 26)
+#define GI2CCTL_I2CDEVADDR_SHIFT 26
+#define GI2CCTL_I2CSUSPCTL BIT(25)
+#define GI2CCTL_ACK BIT(24)
+#define GI2CCTL_I2CEN BIT(23)
+#define GI2CCTL_ADDR_MASK (0x7f << 16)
+#define GI2CCTL_ADDR_SHIFT 16
+#define GI2CCTL_REGADDR_MASK (0xff << 8)
+#define GI2CCTL_REGADDR_SHIFT 8
+#define GI2CCTL_RWDATA_MASK (0xff << 0)
+#define GI2CCTL_RWDATA_SHIFT 0
+
+#define GPVNDCTL HSOTG_REG(0x0034)
+#define GPVNDCTL_REGWR BIT(22)
+#define GPVNDCTL_NEWREGREQ BIT(25)
+#define GPVNDCTL_VSTSDONE BIT(27)
+#define GPVNDCTL_REGADDR_SHIFT 16
+#define GPVNDCTL_REGDATA_SHIFT 0
+#define GPVNDCTL_REGDATA_MASK 0xff
+
+#define GGPIO HSOTG_REG(0x0038)
+#define GGPIO_STM32_OTG_GCCFG_PWRDWN BIT(16)
+
+#define GUID HSOTG_REG(0x003c)
+#define GSNPSID HSOTG_REG(0x0040)
+#define GHWCFG1 HSOTG_REG(0x0044)
+#define GSNPSID_ID_MASK GENMASK(31, 16)
+
+#define GHWCFG2 HSOTG_REG(0x0048)
+#define GHWCFG2_OTG_ENABLE_IC_USB BIT(31)
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_MASK (0x1f << 26)
+#define GHWCFG2_DEV_TOKEN_Q_DEPTH_SHIFT 26
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_MASK (0x3 << 24)
+#define GHWCFG2_HOST_PERIO_TX_Q_DEPTH_SHIFT 24
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_MASK (0x3 << 22)
+#define GHWCFG2_NONPERIO_TX_Q_DEPTH_SHIFT 22
+#define GHWCFG2_MULTI_PROC_INT BIT(20)
+#define GHWCFG2_DYNAMIC_FIFO BIT(19)
+#define GHWCFG2_PERIO_EP_SUPPORTED BIT(18)
+#define GHWCFG2_NUM_HOST_CHAN_MASK (0xf << 14)
+#define GHWCFG2_NUM_HOST_CHAN_SHIFT 14
+#define GHWCFG2_NUM_DEV_EP_MASK (0xf << 10)
+#define GHWCFG2_NUM_DEV_EP_SHIFT 10
+#define GHWCFG2_FS_PHY_TYPE_MASK (0x3 << 8)
+#define GHWCFG2_FS_PHY_TYPE_SHIFT 8
+#define GHWCFG2_FS_PHY_TYPE_NOT_SUPPORTED 0
+#define GHWCFG2_FS_PHY_TYPE_DEDICATED 1
+#define GHWCFG2_FS_PHY_TYPE_SHARED_UTMI 2
+#define GHWCFG2_FS_PHY_TYPE_SHARED_ULPI 3
+#define GHWCFG2_HS_PHY_TYPE_MASK (0x3 << 6)
+#define GHWCFG2_HS_PHY_TYPE_SHIFT 6
+#define GHWCFG2_HS_PHY_TYPE_NOT_SUPPORTED 0
+#define GHWCFG2_HS_PHY_TYPE_UTMI 1
+#define GHWCFG2_HS_PHY_TYPE_ULPI 2
+#define GHWCFG2_HS_PHY_TYPE_UTMI_ULPI 3
+#define GHWCFG2_POINT2POINT BIT(5)
+#define GHWCFG2_ARCHITECTURE_MASK (0x3 << 3)
+#define GHWCFG2_ARCHITECTURE_SHIFT 3
+#define GHWCFG2_SLAVE_ONLY_ARCH 0
+#define GHWCFG2_EXT_DMA_ARCH 1
+#define GHWCFG2_INT_DMA_ARCH 2
+#define GHWCFG2_OP_MODE_MASK (0x7 << 0)
+#define GHWCFG2_OP_MODE_SHIFT 0
+#define GHWCFG2_OP_MODE_HNP_SRP_CAPABLE 0
+#define GHWCFG2_OP_MODE_SRP_ONLY_CAPABLE 1
+#define GHWCFG2_OP_MODE_NO_HNP_SRP_CAPABLE 2
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_DEVICE 3
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_DEVICE 4
+#define GHWCFG2_OP_MODE_SRP_CAPABLE_HOST 5
+#define GHWCFG2_OP_MODE_NO_SRP_CAPABLE_HOST 6
+#define GHWCFG2_OP_MODE_UNDEFINED 7
+
+#define GHWCFG3 HSOTG_REG(0x004c)
+#define GHWCFG3_DFIFO_DEPTH_MASK (0xffff << 16)
+#define GHWCFG3_DFIFO_DEPTH_SHIFT 16
+#define GHWCFG3_OTG_LPM_EN BIT(15)
+#define GHWCFG3_BC_SUPPORT BIT(14)
+#define GHWCFG3_OTG_ENABLE_HSIC BIT(13)
+#define GHWCFG3_ADP_SUPP BIT(12)
+#define GHWCFG3_SYNCH_RESET_TYPE BIT(11)
+#define GHWCFG3_OPTIONAL_FEATURES BIT(10)
+#define GHWCFG3_VENDOR_CTRL_IF BIT(9)
+#define GHWCFG3_I2C BIT(8)
+#define GHWCFG3_OTG_FUNC BIT(7)
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_MASK (0x7 << 4)
+#define GHWCFG3_PACKET_SIZE_CNTR_WIDTH_SHIFT 4
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_MASK (0xf << 0)
+#define GHWCFG3_XFER_SIZE_CNTR_WIDTH_SHIFT 0
+
+#define GHWCFG4 HSOTG_REG(0x0050)
+#define GHWCFG4_DESC_DMA_DYN BIT(31)
+#define GHWCFG4_DESC_DMA BIT(30)
+#define GHWCFG4_NUM_IN_EPS_MASK (0xf << 26)
+#define GHWCFG4_NUM_IN_EPS_SHIFT 26
+#define GHWCFG4_DED_FIFO_EN BIT(25)
+#define GHWCFG4_DED_FIFO_SHIFT 25
+#define GHWCFG4_SESSION_END_FILT_EN BIT(24)
+#define GHWCFG4_B_VALID_FILT_EN BIT(23)
+#define GHWCFG4_A_VALID_FILT_EN BIT(22)
+#define GHWCFG4_VBUS_VALID_FILT_EN BIT(21)
+#define GHWCFG4_IDDIG_FILT_EN BIT(20)
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_MASK (0xf << 16)
+#define GHWCFG4_NUM_DEV_MODE_CTRL_EP_SHIFT 16
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_MASK (0x3 << 14)
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_SHIFT 14
+#define GHWCFG4_ACG_SUPPORTED BIT(12)
+#define GHWCFG4_IPG_ISOC_SUPPORTED BIT(11)
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8 0
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_16 1
+#define GHWCFG4_UTMI_PHY_DATA_WIDTH_8_OR_16 2
+#define GHWCFG4_XHIBER BIT(7)
+#define GHWCFG4_HIBER BIT(6)
+#define GHWCFG4_MIN_AHB_FREQ BIT(5)
+#define GHWCFG4_POWER_OPTIMIZ BIT(4)
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_MASK (0xf << 0)
+#define GHWCFG4_NUM_DEV_PERIO_IN_EP_SHIFT 0
+
+#define GLPMCFG HSOTG_REG(0x0054)
+#define GLPMCFG_INVSELHSIC BIT(31)
+#define GLPMCFG_HSICCON BIT(30)
+#define GLPMCFG_RSTRSLPSTS BIT(29)
+#define GLPMCFG_ENBESL BIT(28)
+#define GLPMCFG_LPM_RETRYCNT_STS_MASK (0x7 << 25)
+#define GLPMCFG_LPM_RETRYCNT_STS_SHIFT 25
+#define GLPMCFG_SNDLPM BIT(24)
+#define GLPMCFG_RETRY_CNT_MASK (0x7 << 21)
+#define GLPMCFG_RETRY_CNT_SHIFT 21
+#define GLPMCFG_LPM_CHNL_INDX_MASK (0xf << 17)
+#define GLPMCFG_LPM_CHNL_INDX_SHIFT 17
+#define GLPMCFG_L1RESUMEOK BIT(16)
+#define GLPMCFG_SLPSTS BIT(15)
+#define GLPMCFG_COREL1RES_MASK (0x3 << 13)
+#define GLPMCFG_COREL1RES_SHIFT 13
+#define GLPMCFG_HIRD_THRES_MASK (0x1f << 8)
+#define GLPMCFG_HIRD_THRES_SHIFT 8
+#define GLPMCFG_HIRD_THRES_EN (0x10 << 8)
+#define GLPMCFG_ENBLSLPM BIT(7)
+#define GLPMCFG_BREMOTEWAKE BIT(6)
+#define GLPMCFG_HIRD_MASK (0xf << 2)
+#define GLPMCFG_HIRD_SHIFT 2
+#define GLPMCFG_APPL1RES BIT(1)
+#define GLPMCFG_LPMCAP BIT(0)
+
+#define GPWRDN HSOTG_REG(0x0058)
+#define GPWRDN_MULT_VAL_ID_BC_MASK (0x1f << 24)
+#define GPWRDN_MULT_VAL_ID_BC_SHIFT 24
+#define GPWRDN_ADP_INT BIT(23)
+#define GPWRDN_BSESSVLD BIT(22)
+#define GPWRDN_IDSTS BIT(21)
+#define GPWRDN_LINESTATE_MASK (0x3 << 19)
+#define GPWRDN_LINESTATE_SHIFT 19
+#define GPWRDN_STS_CHGINT_MSK BIT(18)
+#define GPWRDN_STS_CHGINT BIT(17)
+#define GPWRDN_SRP_DET_MSK BIT(16)
+#define GPWRDN_SRP_DET BIT(15)
+#define GPWRDN_CONNECT_DET_MSK BIT(14)
+#define GPWRDN_CONNECT_DET BIT(13)
+#define GPWRDN_DISCONN_DET_MSK BIT(12)
+#define GPWRDN_DISCONN_DET BIT(11)
+#define GPWRDN_RST_DET_MSK BIT(10)
+#define GPWRDN_RST_DET BIT(9)
+#define GPWRDN_LNSTSCHG_MSK BIT(8)
+#define GPWRDN_LNSTSCHG BIT(7)
+#define GPWRDN_DIS_VBUS BIT(6)
+#define GPWRDN_PWRDNSWTCH BIT(5)
+#define GPWRDN_PWRDNRSTN BIT(4)
+#define GPWRDN_PWRDNCLMP BIT(3)
+#define GPWRDN_RESTORE BIT(2)
+#define GPWRDN_PMUACTV BIT(1)
+#define GPWRDN_PMUINTSEL BIT(0)
+
+#define GDFIFOCFG HSOTG_REG(0x005c)
+#define GDFIFOCFG_EPINFOBASE_MASK (0xffff << 16)
+#define GDFIFOCFG_EPINFOBASE_SHIFT 16
+#define GDFIFOCFG_GDFIFOCFG_MASK (0xffff << 0)
+#define GDFIFOCFG_GDFIFOCFG_SHIFT 0
+
+#define ADPCTL HSOTG_REG(0x0060)
+#define ADPCTL_AR_MASK (0x3 << 27)
+#define ADPCTL_AR_SHIFT 27
+#define ADPCTL_ADP_TMOUT_INT_MSK BIT(26)
+#define ADPCTL_ADP_SNS_INT_MSK BIT(25)
+#define ADPCTL_ADP_PRB_INT_MSK BIT(24)
+#define ADPCTL_ADP_TMOUT_INT BIT(23)
+#define ADPCTL_ADP_SNS_INT BIT(22)
+#define ADPCTL_ADP_PRB_INT BIT(21)
+#define ADPCTL_ADPENA BIT(20)
+#define ADPCTL_ADPRES BIT(19)
+#define ADPCTL_ENASNS BIT(18)
+#define ADPCTL_ENAPRB BIT(17)
+#define ADPCTL_RTIM_MASK (0x7ff << 6)
+#define ADPCTL_RTIM_SHIFT 6
+#define ADPCTL_PRB_PER_MASK (0x3 << 4)
+#define ADPCTL_PRB_PER_SHIFT 4
+#define ADPCTL_PRB_DELTA_MASK (0x3 << 2)
+#define ADPCTL_PRB_DELTA_SHIFT 2
+#define ADPCTL_PRB_DSCHRG_MASK (0x3 << 0)
+#define ADPCTL_PRB_DSCHRG_SHIFT 0
+
+#define HPTXFSIZ HSOTG_REG(0x100)
+/* Use FIFOSIZE_* constants to access this register */
+
+#define DPTXFSIZN(_a) HSOTG_REG(0x104 + (((_a) - 1) * 4))
+/* Use FIFOSIZE_* constants to access this register */
+
+/* These apply to the GNPTXFSIZ, HPTXFSIZ and DPTXFSIZN registers */
+#define FIFOSIZE_DEPTH_MASK (0xffff << 16)
+#define FIFOSIZE_DEPTH_SHIFT 16
+#define FIFOSIZE_STARTADDR_MASK (0xffff << 0)
+#define FIFOSIZE_STARTADDR_SHIFT 0
+#define FIFOSIZE_DEPTH_GET(_x) (((_x) >> 16) & 0xffff)
+
+/* Device mode registers */
+
+#define DCFG HSOTG_REG(0x800)
+#define DCFG_DESCDMA_EN BIT(23)
+#define DCFG_EPMISCNT_MASK (0x1f << 18)
+#define DCFG_EPMISCNT_SHIFT 18
+#define DCFG_EPMISCNT_LIMIT 0x1f
+#define DCFG_EPMISCNT(_x) ((_x) << 18)
+#define DCFG_IPG_ISOC_SUPPORDED BIT(17)
+#define DCFG_PERFRINT_MASK (0x3 << 11)
+#define DCFG_PERFRINT_SHIFT 11
+#define DCFG_PERFRINT_LIMIT 0x3
+#define DCFG_PERFRINT(_x) ((_x) << 11)
+#define DCFG_DEVADDR_MASK (0x7f << 4)
+#define DCFG_DEVADDR_SHIFT 4
+#define DCFG_DEVADDR_LIMIT 0x7f
+#define DCFG_DEVADDR(_x) ((_x) << 4)
+#define DCFG_NZ_STS_OUT_HSHK BIT(2)
+#define DCFG_DEVSPD_MASK (0x3 << 0)
+#define DCFG_DEVSPD_SHIFT 0
+#define DCFG_DEVSPD_HS 0
+#define DCFG_DEVSPD_FS 1
+#define DCFG_DEVSPD_LS 2
+#define DCFG_DEVSPD_FS48 3
+
+#define DCTL HSOTG_REG(0x804)
+#define DCTL_PWRONPRGDONE BIT(11)
+#define DCTL_CGOUTNAK BIT(10)
+#define DCTL_SGOUTNAK BIT(9)
+#define DCTL_CGNPINNAK BIT(8)
+#define DCTL_SGNPINNAK BIT(7)
+#define DCTL_TSTCTL_MASK (0x7 << 4)
+#define DCTL_TSTCTL_SHIFT 4
+#define DCTL_GOUTNAKSTS BIT(3)
+#define DCTL_GNPINNAKSTS BIT(2)
+#define DCTL_SFTDISCON BIT(1)
+#define DCTL_RMTWKUPSIG BIT(0)
+
+#define DSTS HSOTG_REG(0x808)
+#define DSTS_SOFFN_MASK (0x3fff << 8)
+#define DSTS_SOFFN_SHIFT 8
+#define DSTS_SOFFN_LIMIT 0x3fff
+#define DSTS_SOFFN(_x) ((_x) << 8)
+#define DSTS_ERRATICERR BIT(3)
+#define DSTS_ENUMSPD_MASK (0x3 << 1)
+#define DSTS_ENUMSPD_SHIFT 1
+#define DSTS_ENUMSPD_HS 0
+#define DSTS_ENUMSPD_FS 1
+#define DSTS_ENUMSPD_LS 2
+#define DSTS_ENUMSPD_FS48 3
+#define DSTS_SUSPSTS BIT(0)
+
+#define DIEPMSK HSOTG_REG(0x810)
+#define DIEPMSK_NAKMSK BIT(13)
+#define DIEPMSK_BNAININTRMSK BIT(9)
+#define DIEPMSK_TXFIFOUNDRNMSK BIT(8)
+#define DIEPMSK_TXFIFOEMPTY BIT(7)
+#define DIEPMSK_INEPNAKEFFMSK BIT(6)
+#define DIEPMSK_INTKNEPMISMSK BIT(5)
+#define DIEPMSK_INTKNTXFEMPMSK BIT(4)
+#define DIEPMSK_TIMEOUTMSK BIT(3)
+#define DIEPMSK_AHBERRMSK BIT(2)
+#define DIEPMSK_EPDISBLDMSK BIT(1)
+#define DIEPMSK_XFERCOMPLMSK BIT(0)
+
+#define DOEPMSK HSOTG_REG(0x814)
+#define DOEPMSK_BNAMSK BIT(9)
+#define DOEPMSK_BACK2BACKSETUP BIT(6)
+#define DOEPMSK_STSPHSERCVDMSK BIT(5)
+#define DOEPMSK_OUTTKNEPDISMSK BIT(4)
+#define DOEPMSK_SETUPMSK BIT(3)
+#define DOEPMSK_AHBERRMSK BIT(2)
+#define DOEPMSK_EPDISBLDMSK BIT(1)
+#define DOEPMSK_XFERCOMPLMSK BIT(0)
+
+#define DAINT HSOTG_REG(0x818)
+#define DAINTMSK HSOTG_REG(0x81C)
+#define DAINT_OUTEP_SHIFT 16
+#define DAINT_OUTEP(_x) (1 << ((_x) + 16))
+#define DAINT_INEP(_x) (1 << (_x))
+
+#define DTKNQR1 HSOTG_REG(0x820)
+#define DTKNQR2 HSOTG_REG(0x824)
+#define DTKNQR3 HSOTG_REG(0x830)
+#define DTKNQR4 HSOTG_REG(0x834)
+#define DIEPEMPMSK HSOTG_REG(0x834)
+
+#define DVBUSDIS HSOTG_REG(0x828)
+#define DVBUSPULSE HSOTG_REG(0x82C)
+
+#define DIEPCTL0 HSOTG_REG(0x900)
+#define DIEPCTL(_a) HSOTG_REG(0x900 + ((_a) * 0x20))
+
+#define DOEPCTL0 HSOTG_REG(0xB00)
+#define DOEPCTL(_a) HSOTG_REG(0xB00 + ((_a) * 0x20))
+
+/* EP0 specialness:
+ * bits[29..28] - reserved (no SetD0PID, SetD1PID)
+ * bits[25..22] - should always be zero, this isn't a periodic endpoint
+ * bits[10..0] - MPS setting different for EP0
+ */
+#define D0EPCTL_MPS_MASK (0x3 << 0)
+#define D0EPCTL_MPS_SHIFT 0
+#define D0EPCTL_MPS_64 0
+#define D0EPCTL_MPS_32 1
+#define D0EPCTL_MPS_16 2
+#define D0EPCTL_MPS_8 3
+
+#define DXEPCTL_EPENA BIT(31)
+#define DXEPCTL_EPDIS BIT(30)
+#define DXEPCTL_SETD1PID BIT(29)
+#define DXEPCTL_SETODDFR BIT(29)
+#define DXEPCTL_SETD0PID BIT(28)
+#define DXEPCTL_SETEVENFR BIT(28)
+#define DXEPCTL_SNAK BIT(27)
+#define DXEPCTL_CNAK BIT(26)
+#define DXEPCTL_TXFNUM_MASK (0xf << 22)
+#define DXEPCTL_TXFNUM_SHIFT 22
+#define DXEPCTL_TXFNUM_LIMIT 0xf
+#define DXEPCTL_TXFNUM(_x) ((_x) << 22)
+#define DXEPCTL_STALL BIT(21)
+#define DXEPCTL_SNP BIT(20)
+#define DXEPCTL_EPTYPE_MASK (0x3 << 18)
+#define DXEPCTL_EPTYPE_CONTROL (0x0 << 18)
+#define DXEPCTL_EPTYPE_ISO (0x1 << 18)
+#define DXEPCTL_EPTYPE_BULK (0x2 << 18)
+#define DXEPCTL_EPTYPE_INTERRUPT (0x3 << 18)
+
+#define DXEPCTL_NAKSTS BIT(17)
+#define DXEPCTL_DPID BIT(16)
+#define DXEPCTL_EOFRNUM BIT(16)
+#define DXEPCTL_USBACTEP BIT(15)
+#define DXEPCTL_NEXTEP_MASK (0xf << 11)
+#define DXEPCTL_NEXTEP_SHIFT 11
+#define DXEPCTL_NEXTEP_LIMIT 0xf
+#define DXEPCTL_NEXTEP(_x) ((_x) << 11)
+#define DXEPCTL_MPS_MASK (0x7ff << 0)
+#define DXEPCTL_MPS_SHIFT 0
+#define DXEPCTL_MPS_LIMIT 0x7ff
+#define DXEPCTL_MPS(_x) ((_x) << 0)
+
+#define DIEPINT(_a) HSOTG_REG(0x908 + ((_a) * 0x20))
+#define DOEPINT(_a) HSOTG_REG(0xB08 + ((_a) * 0x20))
+#define DXEPINT_SETUP_RCVD BIT(15)
+#define DXEPINT_NYETINTRPT BIT(14)
+#define DXEPINT_NAKINTRPT BIT(13)
+#define DXEPINT_BBLEERRINTRPT BIT(12)
+#define DXEPINT_PKTDRPSTS BIT(11)
+#define DXEPINT_BNAINTR BIT(9)
+#define DXEPINT_TXFIFOUNDRN BIT(8)
+#define DXEPINT_OUTPKTERR BIT(8)
+#define DXEPINT_TXFEMP BIT(7)
+#define DXEPINT_INEPNAKEFF BIT(6)
+#define DXEPINT_BACK2BACKSETUP BIT(6)
+#define DXEPINT_INTKNEPMIS BIT(5)
+#define DXEPINT_STSPHSERCVD BIT(5)
+#define DXEPINT_INTKNTXFEMP BIT(4)
+#define DXEPINT_OUTTKNEPDIS BIT(4)
+#define DXEPINT_TIMEOUT BIT(3)
+#define DXEPINT_SETUP BIT(3)
+#define DXEPINT_AHBERR BIT(2)
+#define DXEPINT_EPDISBLD BIT(1)
+#define DXEPINT_XFERCOMPL BIT(0)
+
+#define DIEPTSIZ0 HSOTG_REG(0x910)
+#define DIEPTSIZ0_PKTCNT_MASK (0x3 << 19)
+#define DIEPTSIZ0_PKTCNT_SHIFT 19
+#define DIEPTSIZ0_PKTCNT_LIMIT 0x3
+#define DIEPTSIZ0_PKTCNT(_x) ((_x) << 19)
+#define DIEPTSIZ0_XFERSIZE_MASK (0x7f << 0)
+#define DIEPTSIZ0_XFERSIZE_SHIFT 0
+#define DIEPTSIZ0_XFERSIZE_LIMIT 0x7f
+#define DIEPTSIZ0_XFERSIZE(_x) ((_x) << 0)
+
+#define DOEPTSIZ0 HSOTG_REG(0xB10)
+#define DOEPTSIZ0_SUPCNT_MASK (0x3 << 29)
+#define DOEPTSIZ0_SUPCNT_SHIFT 29
+#define DOEPTSIZ0_SUPCNT_LIMIT 0x3
+#define DOEPTSIZ0_SUPCNT(_x) ((_x) << 29)
+#define DOEPTSIZ0_PKTCNT BIT(19)
+#define DOEPTSIZ0_XFERSIZE_MASK (0x7f << 0)
+#define DOEPTSIZ0_XFERSIZE_SHIFT 0
+
+#define DIEPTSIZ(_a) HSOTG_REG(0x910 + ((_a) * 0x20))
+#define DOEPTSIZ(_a) HSOTG_REG(0xB10 + ((_a) * 0x20))
+#define DXEPTSIZ_MC_MASK (0x3 << 29)
+#define DXEPTSIZ_MC_SHIFT 29
+#define DXEPTSIZ_MC_LIMIT 0x3
+#define DXEPTSIZ_MC(_x) ((_x) << 29)
+#define DXEPTSIZ_PKTCNT_MASK (0x3ff << 19)
+#define DXEPTSIZ_PKTCNT_SHIFT 19
+#define DXEPTSIZ_PKTCNT_LIMIT 0x3ff
+#define DXEPTSIZ_PKTCNT_GET(_v) (((_v) >> 19) & 0x3ff)
+#define DXEPTSIZ_PKTCNT(_x) ((_x) << 19)
+#define DXEPTSIZ_XFERSIZE_MASK (0x7ffff << 0)
+#define DXEPTSIZ_XFERSIZE_SHIFT 0
+#define DXEPTSIZ_XFERSIZE_LIMIT 0x7ffff
+#define DXEPTSIZ_XFERSIZE_GET(_v) (((_v) >> 0) & 0x7ffff)
+#define DXEPTSIZ_XFERSIZE(_x) ((_x) << 0)
+
+#define DIEPDMA(_a) HSOTG_REG(0x914 + ((_a) * 0x20))
+#define DOEPDMA(_a) HSOTG_REG(0xB14 + ((_a) * 0x20))
+
+#define DTXFSTS(_a) HSOTG_REG(0x918 + ((_a) * 0x20))
+
+#define PCGCTL HSOTG_REG(0x0e00)
+#define PCGCTL_IF_DEV_MODE BIT(31)
+#define PCGCTL_P2HD_PRT_SPD_MASK (0x3 << 29)
+#define PCGCTL_P2HD_PRT_SPD_SHIFT 29
+#define PCGCTL_P2HD_DEV_ENUM_SPD_MASK (0x3 << 27)
+#define PCGCTL_P2HD_DEV_ENUM_SPD_SHIFT 27
+#define PCGCTL_MAC_DEV_ADDR_MASK (0x7f << 20)
+#define PCGCTL_MAC_DEV_ADDR_SHIFT 20
+#define PCGCTL_MAX_TERMSEL BIT(19)
+#define PCGCTL_MAX_XCVRSELECT_MASK (0x3 << 17)
+#define PCGCTL_MAX_XCVRSELECT_SHIFT 17
+#define PCGCTL_PORT_POWER BIT(16)
+#define PCGCTL_PRT_CLK_SEL_MASK (0x3 << 14)
+#define PCGCTL_PRT_CLK_SEL_SHIFT 14
+#define PCGCTL_ESS_REG_RESTORED BIT(13)
+#define PCGCTL_EXTND_HIBER_SWITCH BIT(12)
+#define PCGCTL_EXTND_HIBER_PWRCLMP BIT(11)
+#define PCGCTL_ENBL_EXTND_HIBER BIT(10)
+#define PCGCTL_RESTOREMODE BIT(9)
+#define PCGCTL_RESETAFTSUSP BIT(8)
+#define PCGCTL_DEEP_SLEEP BIT(7)
+#define PCGCTL_PHY_IN_SLEEP BIT(6)
+#define PCGCTL_ENBL_SLEEP_GATING BIT(5)
+#define PCGCTL_RSTPDWNMODULE BIT(3)
+#define PCGCTL_PWRCLMP BIT(2)
+#define PCGCTL_GATEHCLK BIT(1)
+#define PCGCTL_STOPPCLK BIT(0)
+
+#define PCGCCTL1 HSOTG_REG(0xe04)
+#define PCGCCTL1_TIMER (0x3 << 1)
+#define PCGCCTL1_GATEEN BIT(0)
+
+#define EPFIFO(_a) HSOTG_REG(0x1000 + ((_a) * 0x1000))
+
+/* Host Mode Registers */
+
+#define HCFG HSOTG_REG(0x0400)
+#define HCFG_MODECHTIMEN BIT(31)
+#define HCFG_PERSCHEDENA BIT(26)
+#define HCFG_FRLISTEN_MASK (0x3 << 24)
+#define HCFG_FRLISTEN_SHIFT 24
+#define HCFG_FRLISTEN_8 (0 << 24)
+#define FRLISTEN_8_SIZE 8
+#define HCFG_FRLISTEN_16 BIT(24)
+#define FRLISTEN_16_SIZE 16
+#define HCFG_FRLISTEN_32 (2 << 24)
+#define FRLISTEN_32_SIZE 32
+#define HCFG_FRLISTEN_64 (3 << 24)
+#define FRLISTEN_64_SIZE 64
+#define HCFG_DESCDMA BIT(23)
+#define HCFG_RESVALID_MASK (0xff << 8)
+#define HCFG_RESVALID_SHIFT 8
+#define HCFG_ENA32KHZ BIT(7)
+#define HCFG_FSLSSUPP BIT(2)
+#define HCFG_FSLSPCLKSEL_MASK (0x3 << 0)
+#define HCFG_FSLSPCLKSEL_SHIFT 0
+#define HCFG_FSLSPCLKSEL_30_60_MHZ 0
+#define HCFG_FSLSPCLKSEL_48_MHZ 1
+#define HCFG_FSLSPCLKSEL_6_MHZ 2
+
+#define HFIR HSOTG_REG(0x0404)
+#define HFIR_FRINT_MASK (0xffff << 0)
+#define HFIR_FRINT_SHIFT 0
+#define HFIR_RLDCTRL BIT(16)
+
+#define HFNUM HSOTG_REG(0x0408)
+#define HFNUM_FRREM_MASK (0xffff << 16)
+#define HFNUM_FRREM_SHIFT 16
+#define HFNUM_FRNUM_MASK (0xffff << 0)
+#define HFNUM_FRNUM_SHIFT 0
+#define HFNUM_MAX_FRNUM 0x3fff
+
+#define HPTXSTS HSOTG_REG(0x0410)
+#define TXSTS_QTOP_ODD BIT(31)
+#define TXSTS_QTOP_CHNEP_MASK (0xf << 27)
+#define TXSTS_QTOP_CHNEP_SHIFT 27
+#define TXSTS_QTOP_TOKEN_MASK (0x3 << 25)
+#define TXSTS_QTOP_TOKEN_SHIFT 25
+#define TXSTS_QTOP_TERMINATE BIT(24)
+#define TXSTS_QSPCAVAIL_MASK (0xff << 16)
+#define TXSTS_QSPCAVAIL_SHIFT 16
+#define TXSTS_FSPCAVAIL_MASK (0xffff << 0)
+#define TXSTS_FSPCAVAIL_SHIFT 0
+
+#define HAINT HSOTG_REG(0x0414)
+#define HAINTMSK HSOTG_REG(0x0418)
+#define HFLBADDR HSOTG_REG(0x041c)
+
+#define HPRT0 HSOTG_REG(0x0440)
+#define HPRT0_SPD_MASK (0x3 << 17)
+#define HPRT0_SPD_SHIFT 17
+#define HPRT0_SPD_HIGH_SPEED 0
+#define HPRT0_SPD_FULL_SPEED 1
+#define HPRT0_SPD_LOW_SPEED 2
+#define HPRT0_TSTCTL_MASK (0xf << 13)
+#define HPRT0_TSTCTL_SHIFT 13
+#define HPRT0_PWR BIT(12)
+#define HPRT0_LNSTS_MASK (0x3 << 10)
+#define HPRT0_LNSTS_SHIFT 10
+#define HPRT0_RST BIT(8)
+#define HPRT0_SUSP BIT(7)
+#define HPRT0_RES BIT(6)
+#define HPRT0_OVRCURRCHG BIT(5)
+#define HPRT0_OVRCURRACT BIT(4)
+#define HPRT0_ENACHG BIT(3)
+#define HPRT0_ENA BIT(2)
+#define HPRT0_CONNDET BIT(1)
+#define HPRT0_CONNSTS BIT(0)
+
+#define HCCHAR(_ch) HSOTG_REG(0x0500 + 0x20 * (_ch))
+#define HCCHAR_CHENA BIT(31)
+#define HCCHAR_CHDIS BIT(30)
+#define HCCHAR_ODDFRM BIT(29)
+#define HCCHAR_DEVADDR_MASK (0x7f << 22)
+#define HCCHAR_DEVADDR_SHIFT 22
+#define HCCHAR_MULTICNT_MASK (0x3 << 20)
+#define HCCHAR_MULTICNT_SHIFT 20
+#define HCCHAR_EPTYPE_MASK (0x3 << 18)
+#define HCCHAR_EPTYPE_SHIFT 18
+#define HCCHAR_LSPDDEV BIT(17)
+#define HCCHAR_EPDIR BIT(15)
+#define HCCHAR_EPNUM_MASK (0xf << 11)
+#define HCCHAR_EPNUM_SHIFT 11
+#define HCCHAR_MPS_MASK (0x7ff << 0)
+#define HCCHAR_MPS_SHIFT 0
+
+#define HCSPLT(_ch) HSOTG_REG(0x0504 + 0x20 * (_ch))
+#define HCSPLT_SPLTENA BIT(31)
+#define HCSPLT_COMPSPLT BIT(16)
+#define HCSPLT_XACTPOS_MASK (0x3 << 14)
+#define HCSPLT_XACTPOS_SHIFT 14
+#define HCSPLT_XACTPOS_MID 0
+#define HCSPLT_XACTPOS_END 1
+#define HCSPLT_XACTPOS_BEGIN 2
+#define HCSPLT_XACTPOS_ALL 3
+#define HCSPLT_HUBADDR_MASK (0x7f << 7)
+#define HCSPLT_HUBADDR_SHIFT 7
+#define HCSPLT_PRTADDR_MASK (0x7f << 0)
+#define HCSPLT_PRTADDR_SHIFT 0
+
+#define HCINT(_ch) HSOTG_REG(0x0508 + 0x20 * (_ch))
+#define HCINTMSK(_ch) HSOTG_REG(0x050c + 0x20 * (_ch))
+#define HCINTMSK_RESERVED14_31 (0x3ffff << 14)
+#define HCINTMSK_FRM_LIST_ROLL BIT(13)
+#define HCINTMSK_XCS_XACT BIT(12)
+#define HCINTMSK_BNA BIT(11)
+#define HCINTMSK_DATATGLERR BIT(10)
+#define HCINTMSK_FRMOVRUN BIT(9)
+#define HCINTMSK_BBLERR BIT(8)
+#define HCINTMSK_XACTERR BIT(7)
+#define HCINTMSK_NYET BIT(6)
+#define HCINTMSK_ACK BIT(5)
+#define HCINTMSK_NAK BIT(4)
+#define HCINTMSK_STALL BIT(3)
+#define HCINTMSK_AHBERR BIT(2)
+#define HCINTMSK_CHHLTD BIT(1)
+#define HCINTMSK_XFERCOMPL BIT(0)
+
+#define HCTSIZ(_ch) HSOTG_REG(0x0510 + 0x20 * (_ch))
+#define TSIZ_DOPNG BIT(31)
+#define TSIZ_SC_MC_PID_MASK (0x3 << 29)
+#define TSIZ_SC_MC_PID_SHIFT 29
+#define TSIZ_SC_MC_PID_DATA0 0
+#define TSIZ_SC_MC_PID_DATA2 1
+#define TSIZ_SC_MC_PID_DATA1 2
+#define TSIZ_SC_MC_PID_MDATA 3
+#define TSIZ_SC_MC_PID_SETUP 3
+#define TSIZ_PKTCNT_MASK (0x3ff << 19)
+#define TSIZ_PKTCNT_SHIFT 19
+#define TSIZ_NTD_MASK (0xff << 8)
+#define TSIZ_NTD_SHIFT 8
+#define TSIZ_SCHINFO_MASK (0xff << 0)
+#define TSIZ_SCHINFO_SHIFT 0
+#define TSIZ_XFERSIZE_MASK (0x7ffff << 0)
+#define TSIZ_XFERSIZE_SHIFT 0
+
+#define HCDMA(_ch) HSOTG_REG(0x0514 + 0x20 * (_ch))
+
+#define HCDMAB(_ch) HSOTG_REG(0x051c + 0x20 * (_ch))
+
+#define HCFIFO(_ch) HSOTG_REG(0x1000 + 0x1000 * (_ch))
+
+/**
+ * struct dwc2_dma_desc - DMA descriptor structure,
+ * used for both host and gadget modes
+ *
+ * @status: DMA descriptor status quadlet
+ * @buf: DMA descriptor data buffer pointer
+ *
+ * DMA Descriptor structure contains two quadlets:
+ * Status quadlet and Data buffer pointer.
+ */
+struct dwc2_dma_desc {
+ u32 status;
+ u32 buf;
+} __packed;
+
+/* Host Mode DMA descriptor status quadlet */
+
+#define HOST_DMA_A BIT(31)
+#define HOST_DMA_STS_MASK (0x3 << 28)
+#define HOST_DMA_STS_SHIFT 28
+#define HOST_DMA_STS_PKTERR BIT(28)
+#define HOST_DMA_EOL BIT(26)
+#define HOST_DMA_IOC BIT(25)
+#define HOST_DMA_SUP BIT(24)
+#define HOST_DMA_ALT_QTD BIT(23)
+#define HOST_DMA_QTD_OFFSET_MASK (0x3f << 17)
+#define HOST_DMA_QTD_OFFSET_SHIFT 17
+#define HOST_DMA_ISOC_NBYTES_MASK (0xfff << 0)
+#define HOST_DMA_ISOC_NBYTES_SHIFT 0
+#define HOST_DMA_NBYTES_MASK (0x1ffff << 0)
+#define HOST_DMA_NBYTES_SHIFT 0
+#define HOST_DMA_NBYTES_LIMIT 131071
+
+#define MAX_DMA_DESC_NUM_GENERIC 64
+#define MAX_DMA_DESC_NUM_HS_ISOC 256
+
+ /* DWC OTG HW Release versions */
+#define DWC2_CORE_REV_2_71a 0x4f54271a
+#define DWC2_CORE_REV_2_72a 0x4f54272a
+#define DWC2_CORE_REV_2_80a 0x4f54280a
+#define DWC2_CORE_REV_2_90a 0x4f54290a
+#define DWC2_CORE_REV_2_91a 0x4f54291a
+#define DWC2_CORE_REV_2_92a 0x4f54292a
+#define DWC2_CORE_REV_2_94a 0x4f54294a
+#define DWC2_CORE_REV_3_00a 0x4f54300a
+#define DWC2_CORE_REV_3_10a 0x4f54310a
+#define DWC2_CORE_REV_4_00a 0x4f54400a
+#define DWC2_FS_IOT_REV_1_00a 0x5531100a
+#define DWC2_HS_IOT_REV_1_00a 0x5532100a
+
+ /* DWC OTG HW Core ID */
+#define DWC2_OTG_ID 0x4f540000
+#define DWC2_FS_IOT_ID 0x55310000
+#define DWC2_HS_IOT_ID 0x55320000
+
+/* ==== u-boot ==== */
+
+/* Default driver configuration */
+#define CONFIG_DWC2_MAX_CHANNELS DWC2_MAX_EPS_CHANNELS /* Max # of EPs */
+#define CONFIG_DWC2_HOST_RX_FIFO_SIZE (516 + CONFIG_DWC2_MAX_CHANNELS)
+#define CONFIG_DWC2_HOST_NPERIO_TX_FIFO_SIZE 0x100 /* nPeriodic TX FIFO */
+#define CONFIG_DWC2_HOST_PERIO_TX_FIFO_SIZE 0x200 /* Periodic TX FIFO */
+
+#endif /* __DWC2_H__ */
diff --git a/drivers/usb/dwc2/rhub.c b/drivers/usb/dwc2/rhub.c
new file mode 100644
index 000000000..86552da99
--- /dev/null
+++ b/drivers/usb/dwc2/rhub.c
@@ -0,0 +1,419 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include "dwc2.h"
+
+static struct descriptor {
+ struct usb_hub_descriptor hub;
+ struct usb_device_descriptor device;
+ struct usb_config_descriptor config;
+ struct usb_interface_descriptor interface;
+ struct usb_endpoint_descriptor endpoint;
+} __attribute__ ((packed)) descriptor = {
+ .hub = {
+ .bLength = USB_DT_HUB_NONVAR_SIZE +
+ ((USB_MAXCHILDREN + 1 + 7) / 8),
+ .bDescriptorType = USB_DT_HUB,
+ .bNbrPorts = 1, /* runtime modified */
+ .wHubCharacteristics = 0,
+ .bPwrOn2PwrGood = 0,
+ .bHubContrCurrent = 0,
+ .u.hs.DeviceRemovable = {0xff},
+ .u.hs.PortPwrCtrlMask = {}
+ },
+ .device = {
+ .bLength = USB_DT_DEVICE_SIZE,
+ .bDescriptorType = USB_DT_DEVICE,
+ .bcdUSB = __constant_cpu_to_le16(2), /* v2.0 */
+ .bDeviceClass = USB_CLASS_HUB,
+ .bDeviceSubClass = 0,
+ .bDeviceProtocol = USB_HUB_PR_HS_NO_TT,
+ .bMaxPacketSize0 = 64,
+ .idVendor = 0x0000,
+ .idProduct = 0x0000,
+ .bcdDevice = 0x0000,
+ .iManufacturer = 1,
+ .iProduct = 2,
+ .iSerialNumber = 0,
+ .bNumConfigurations = 1
+ },
+ .config = {
+ .bLength = USB_DT_CONFIG_SIZE,
+ .bDescriptorType = USB_DT_CONFIG,
+ .wTotalLength = __constant_cpu_to_le16(
+ USB_DT_CONFIG_SIZE +
+ USB_DT_INTERFACE_SIZE +
+ USB_DT_ENDPOINT_SIZE),
+ .bNumInterfaces = 1,
+ .bConfigurationValue = 1,
+ .iConfiguration = 0,
+ .bmAttributes = USB_CONFIG_ATT_SELFPOWER,
+ .bMaxPower = 0
+ },
+ .interface = {
+ .bLength = USB_DT_INTERFACE_SIZE,
+ .bDescriptorType = USB_DT_INTERFACE,
+ .bInterfaceNumber = 0,
+ .bAlternateSetting = 0,
+ .bNumEndpoints = 1,
+ .bInterfaceClass = USB_CLASS_HUB,
+ .bInterfaceSubClass = 0,
+ .bInterfaceProtocol = 0,
+ .iInterface = 0
+ },
+ .endpoint = {
+ .bLength = USB_DT_ENDPOINT_SIZE,
+ .bDescriptorType = USB_DT_ENDPOINT,
+ .bEndpointAddress = 1 | USB_DIR_IN, /* 0x81 */
+ .bmAttributes = USB_ENDPOINT_XFER_INT,
+ .wMaxPacketSize = __constant_cpu_to_le16(
+ (USB_MAXCHILDREN + 1 + 7) / 8),
+ .bInterval = 255
+ },
+};
+
+static char *language_string = "\x09\x04";
+static char *vendor_string = "u-boot";
+static char *product_string = "DWC2 root hub";
+
+/*
+ * DWC2 to USB API interface
+ */
+static int dwc2_submit_rh_msg_in_status(struct dwc2 *dwc2,
+ struct usb_device *dev, void *buffer,
+ int txlen, struct devrequest *cmd)
+{
+ struct usb_port_status *portsts;
+ uint32_t hprt0 = 0;
+ uint32_t port_status = 0;
+ uint32_t port_change = 0;
+ int len = 0;
+ int speed;
+
+ switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
+ case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
+ *(uint16_t *)buffer = cpu_to_le16(1);
+ len = 2;
+ break;
+ case USB_TYPE_STANDARD | USB_RECIP_INTERFACE:
+ case USB_TYPE_STANDARD | USB_RECIP_ENDPOINT:
+ *(uint16_t *)buffer = cpu_to_le16(0);
+ len = 2;
+ break;
+ case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
+ *(uint32_t *)buffer = cpu_to_le32(0);
+ len = 4;
+ break;
+ case USB_RT_PORT: /* USB_TYPE_CLASS | USB_RECIP_OTHER */
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+
+ if (hprt0 & HPRT0_CONNSTS)
+ port_status |= USB_PORT_STAT_CONNECTION;
+ if (hprt0 & HPRT0_ENA)
+ port_status |= USB_PORT_STAT_ENABLE;
+ if (hprt0 & HPRT0_SUSP)
+ port_status |= USB_PORT_STAT_SUSPEND;
+ if (hprt0 & HPRT0_OVRCURRACT)
+ port_status |= USB_PORT_STAT_OVERCURRENT;
+ if (hprt0 & HPRT0_RST)
+ port_status |= USB_PORT_STAT_RESET;
+ if (hprt0 & HPRT0_PWR)
+ port_status |= USB_PORT_STAT_POWER;
+
+ speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+ if (speed == HPRT0_SPD_HIGH_SPEED)
+ port_status |= USB_PORT_STAT_HIGH_SPEED;
+ else if (speed == HPRT0_SPD_LOW_SPEED)
+ port_status |= USB_PORT_STAT_LOW_SPEED;
+
+ if (hprt0 & HPRT0_ENACHG)
+ port_change |= USB_PORT_STAT_C_ENABLE;
+ if (hprt0 & HPRT0_CONNDET)
+ port_change |= USB_PORT_STAT_C_CONNECTION;
+ if (hprt0 & HPRT0_OVRCURRCHG)
+ port_change |= USB_PORT_STAT_C_OVERCURRENT;
+
+ portsts = buffer;
+ portsts->wPortStatus = cpu_to_le16(port_status);
+ portsts->wPortChange = cpu_to_le16(port_change);
+ len = sizeof(*portsts);
+
+ break;
+ default:
+ goto unknown;
+ }
+
+ dev->act_len = min(len, txlen);
+ dev->status = 0;
+
+ return 0;
+
+unknown:
+ dev->act_len = 0;
+ dev->status = USB_ST_STALLED;
+
+ return -1;
+}
+
+static void strtodesc(char *dest, char *src, size_t n)
+{
+ unsigned int i;
+
+ dest[0] = n;
+ dest[1] = 0x3;
+ for (i = 2; i < n && *src != '\0'; i += 2) {
+ dest[i] = *(src++);
+ dest[i + 1] = 0;
+ }
+}
+
+/* Direction: In ; Request: Descriptor */
+static int dwc2_submit_rh_msg_in_descriptor(struct usb_device *dev,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ int len = 0;
+ char *src;
+ uint16_t wValue = le16_to_cpu(cmd->value);
+ uint16_t wLength = le16_to_cpu(cmd->length);
+
+ switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
+ case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
+ switch (wValue >> 8) {
+ case USB_DT_DEVICE:
+ debug("USB_DT_DEVICE request\n");
+ len = min3(txlen, (int)descriptor.device.bLength, (int)wLength);
+ memcpy(buffer, &descriptor.device, len);
+ break;
+ case USB_DT_CONFIG:
+ debug("USB_DT_CONFIG config\n");
+ len = min3(txlen, (int)descriptor.config.wTotalLength, (int)wLength);
+ memcpy(buffer, &descriptor.config, len);
+ break;
+ case USB_DT_STRING:
+ debug("USB_DT_STRING: %#x\n", wValue);
+ switch (wValue & 0xff) {
+ case 0: /* Language */
+ src = language_string;
+ len = strlen(src) + 2;
+ ((char *)buffer)[0] = len;
+ ((char *)buffer)[1] = 0x03;
+ memcpy(buffer + 2, src, strlen(src));
+ break;
+ case 1: /* Vendor */
+ src = vendor_string;
+ len = 2 * strlen(src) + 2;
+ strtodesc(buffer, src, len);
+ break;
+ case 2: /* Product */
+ src = product_string;
+ len = 2 * strlen(src) + 2;
+ strtodesc(buffer, src, len);
+ break;
+ default:
+ debug("%s(): unknown string index 0x%x\n", __func__, wValue & 0xff);
+ goto unknown;
+ }
+ len = min3(txlen, len, (int)wLength);
+ break;
+ default:
+ debug("%s(): unknown requesttype: 0x%x\n", __func__,
+ cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK));
+ goto unknown;
+ }
+ break;
+
+ case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
+ debug("USB_RT_HUB\n");
+
+ len = min3(txlen, (int)descriptor.hub.bLength, (int)wLength);
+ memcpy(buffer, &descriptor.hub, len);
+ break;
+ default:
+ goto unknown;
+ }
+
+ dev->act_len = len;
+ dev->status = 0;
+
+ return 0;
+
+unknown:
+ dev->act_len = 0;
+ dev->status = USB_ST_STALLED;
+
+ return -1;
+}
+
+/* Direction: In ; Request: Configuration */
+static int dwc2_submit_rh_msg_in_configuration(struct usb_device *dev,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ int len = 0;
+
+ switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
+ case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
+ *(uint8_t *)buffer = 0x01;
+ len = min(txlen, 1);
+ break;
+ default:
+ goto unknown;
+ }
+
+ dev->act_len = len;
+ dev->status = 0;
+
+ return 0;
+
+unknown:
+ dev->act_len = 0;
+ dev->status = USB_ST_STALLED;
+
+ return -1;
+}
+
+/* Direction: In */
+static int dwc2_submit_rh_msg_in(struct dwc2 *dwc2,
+ struct usb_device *dev, void *buffer,
+ int txlen, struct devrequest *cmd)
+{
+ switch (cmd->request) {
+ case USB_REQ_GET_STATUS:
+ return dwc2_submit_rh_msg_in_status(dwc2, dev, buffer,
+ txlen, cmd);
+ case USB_REQ_GET_DESCRIPTOR:
+ return dwc2_submit_rh_msg_in_descriptor(dev, buffer,
+ txlen, cmd);
+ case USB_REQ_GET_CONFIGURATION:
+ return dwc2_submit_rh_msg_in_configuration(dev, buffer,
+ txlen, cmd);
+ default:
+ dev->act_len = 0;
+ dev->status = USB_ST_STALLED;
+
+ return -1;
+ }
+}
+
+/* Direction: Out */
+static int dwc2_submit_rh_msg_out(struct dwc2 *dwc2,
+ struct usb_device *dev,
+ void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ uint16_t wValue = le16_to_cpu(cmd->value);
+ uint32_t hprt0;
+
+ switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
+ case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
+ switch (cmd->request) {
+ case USB_REQ_SET_ADDRESS:
+ dwc2_dbg(dwc2, "set root hub addr %d\n", wValue);
+ dwc2->root_hub_devnum = wValue;
+ break;
+ case USB_REQ_SET_CONFIGURATION:
+ break;
+ default:
+ goto unknown;
+ }
+ break;
+ case USB_TYPE_STANDARD | USB_RECIP_ENDPOINT:
+ case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
+ switch (cmd->request) {
+ case USB_REQ_CLEAR_FEATURE:
+ break;
+ }
+ break;
+ case USB_RT_PORT: /* USB_TYPE_CLASS | USB_RECIP_OTHER */
+ switch (cmd->request) {
+ case USB_REQ_CLEAR_FEATURE:
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET
+ | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+ switch (wValue) {
+ case USB_PORT_FEAT_ENABLE:
+ hprt0 |= HPRT0_ENA;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ break;
+ case USB_PORT_FEAT_POWER:
+ break;
+ case USB_PORT_FEAT_C_CONNECTION:
+ hprt0 |= HPRT0_CONNDET;
+ break;
+ case USB_PORT_FEAT_C_ENABLE:
+ hprt0 |= HPRT0_ENACHG;
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ hprt0 |= HPRT0_OVRCURRCHG;
+ break;
+ default:
+ dwc2_dbg(dwc2, "unknown feature 0x%x\n", wValue);
+ goto unknown;
+ }
+ dwc2_writel(dwc2, hprt0, HPRT0);
+ break;
+ case USB_REQ_SET_FEATURE:
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET
+ | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+ switch (wValue) {
+ case USB_PORT_FEAT_SUSPEND:
+ break;
+ case USB_PORT_FEAT_RESET:
+ hprt0 |= HPRT0_RST;
+ dwc2_writel(dwc2, hprt0, HPRT0);
+
+ mdelay(60);
+
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~HPRT0_RST;
+ dwc2_writel(dwc2, hprt0, HPRT0);
+ break;
+ case USB_PORT_FEAT_POWER:
+ break;
+ case USB_PORT_FEAT_ENABLE:
+ /* Set by the core after a reset */
+ break;
+ default:
+ dwc2_dbg(dwc2, "unknown feature 0x%x\n", wValue);
+ goto unknown;
+ }
+ break;
+ default: goto unknown;
+ }
+ break;
+ default:
+ goto unknown;
+ }
+
+ dev->act_len = 0;
+ dev->status = 0;
+
+ return 0;
+
+unknown:
+ dev->act_len = 0;
+ dev->status = USB_ST_STALLED;
+ return -1;
+}
+
+int
+dwc2_submit_rh_msg(struct dwc2 *dwc2, struct usb_device *dev,
+ unsigned long pipe, void *buffer, int txlen,
+ struct devrequest *cmd)
+{
+ int stat = 0;
+
+ if (usb_pipeint(pipe)) {
+ dwc2_err(dwc2, "Root-Hub submit IRQ: NOT implemented\n");
+ return 0;
+ }
+
+ if (cmd->requesttype & USB_DIR_IN)
+ stat = dwc2_submit_rh_msg_in(dwc2, dev, buffer, txlen, cmd);
+ else
+ stat = dwc2_submit_rh_msg_out(dwc2, dev, buffer, txlen, cmd);
+
+ mdelay(1);
+ return stat;
+}
--
2.21.0.196.g041f5ea
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 3/7] usb: dwc2: host: Rework roothub interface
2020-01-22 15:49 [PATCH v2 0/7] usb: dwc2 host driver Jules Maselbas
2020-01-22 15:49 ` [PATCH v2 1/7] usb: dwc2: Add host controller driver Jules Maselbas
2020-01-22 15:49 ` [PATCH v2 2/7] usb: dwc2: host: Read dr_mode from device tree Jules Maselbas
@ 2020-01-22 15:49 ` Jules Maselbas
2020-01-22 15:49 ` [PATCH v2 4/7] usb: dwc2: host: Handle dma mapping errors Jules Maselbas
` (3 subsequent siblings)
6 siblings, 0 replies; 11+ messages in thread
From: Jules Maselbas @ 2020-01-22 15:49 UTC (permalink / raw)
To: Barebox List; +Cc: Jules Maselbas
Roothub requests are now decoded in one place.
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
---
drivers/usb/dwc2/dwc2.h | 2 +-
drivers/usb/dwc2/host.c | 4 +-
drivers/usb/dwc2/rhub.c | 519 +++++++++++++++++++---------------------
3 files changed, 245 insertions(+), 280 deletions(-)
diff --git a/drivers/usb/dwc2/dwc2.h b/drivers/usb/dwc2/dwc2.h
index 60cdca520..35ba00660 100644
--- a/drivers/usb/dwc2/dwc2.h
+++ b/drivers/usb/dwc2/dwc2.h
@@ -36,7 +36,7 @@ int dwc2_submit_int_msg(struct usb_device *dev, unsigned long pipe,
void *buffer, int transfer_len, int interval);
int dwc2_host_init(struct usb_host *host);
-int dwc2_submit_rh_msg(struct dwc2 *dwc2, struct usb_device *dev,
+int dwc2_submit_roothub(struct dwc2 *dwc2, struct usb_device *dev,
unsigned long pipe, void *buf, int len,
struct devrequest *setup);
diff --git a/drivers/usb/dwc2/host.c b/drivers/usb/dwc2/host.c
index d66c70fbc..61c29910e 100644
--- a/drivers/usb/dwc2/host.c
+++ b/drivers/usb/dwc2/host.c
@@ -326,9 +326,9 @@ int dwc2_submit_control_msg(struct usb_device *udev,
int status_direction;
if (devnum == dwc2->root_hub_devnum) {
- udev->status = 0;
udev->speed = USB_SPEED_HIGH;
- return dwc2_submit_rh_msg(dwc2, udev, pipe, buffer, len, setup);
+ ret = dwc2_submit_roothub(dwc2, udev, pipe, buffer, len, setup);
+ return ret;
}
/* SETUP stage */
diff --git a/drivers/usb/dwc2/rhub.c b/drivers/usb/dwc2/rhub.c
index 86552da99..cc733f34e 100644
--- a/drivers/usb/dwc2/rhub.c
+++ b/drivers/usb/dwc2/rhub.c
@@ -7,7 +7,7 @@ static struct descriptor {
struct usb_config_descriptor config;
struct usb_interface_descriptor interface;
struct usb_endpoint_descriptor endpoint;
-} __attribute__ ((packed)) descriptor = {
+} __packed descriptor = {
.hub = {
.bLength = USB_DT_HUB_NONVAR_SIZE +
((USB_MAXCHILDREN + 1 + 7) / 8),
@@ -22,7 +22,7 @@ static struct descriptor {
.device = {
.bLength = USB_DT_DEVICE_SIZE,
.bDescriptorType = USB_DT_DEVICE,
- .bcdUSB = __constant_cpu_to_le16(2), /* v2.0 */
+ .bcdUSB = cpu_to_le16(2), /* v2.0 */
.bDeviceClass = USB_CLASS_HUB,
.bDeviceSubClass = 0,
.bDeviceProtocol = USB_HUB_PR_HS_NO_TT,
@@ -38,7 +38,7 @@ static struct descriptor {
.config = {
.bLength = USB_DT_CONFIG_SIZE,
.bDescriptorType = USB_DT_CONFIG,
- .wTotalLength = __constant_cpu_to_le16(
+ .wTotalLength = cpu_to_le16(
USB_DT_CONFIG_SIZE +
USB_DT_INTERFACE_SIZE +
USB_DT_ENDPOINT_SIZE),
@@ -64,356 +64,321 @@ static struct descriptor {
.bDescriptorType = USB_DT_ENDPOINT,
.bEndpointAddress = 1 | USB_DIR_IN, /* 0x81 */
.bmAttributes = USB_ENDPOINT_XFER_INT,
- .wMaxPacketSize = __constant_cpu_to_le16(
+ .wMaxPacketSize = cpu_to_le16(
(USB_MAXCHILDREN + 1 + 7) / 8),
.bInterval = 255
},
};
-static char *language_string = "\x09\x04";
-static char *vendor_string = "u-boot";
-static char *product_string = "DWC2 root hub";
-
-/*
- * DWC2 to USB API interface
- */
-static int dwc2_submit_rh_msg_in_status(struct dwc2 *dwc2,
- struct usb_device *dev, void *buffer,
- int txlen, struct devrequest *cmd)
+static int dwc2_get_port_status(struct dwc2 *dwc2, struct usb_device *dev,
+ void *buf, int len)
{
struct usb_port_status *portsts;
- uint32_t hprt0 = 0;
- uint32_t port_status = 0;
- uint32_t port_change = 0;
- int len = 0;
+ uint32_t hprt0;
+ uint32_t status = 0;
+ uint32_t change = 0;
int speed;
- switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
- case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
- *(uint16_t *)buffer = cpu_to_le16(1);
- len = 2;
- break;
- case USB_TYPE_STANDARD | USB_RECIP_INTERFACE:
- case USB_TYPE_STANDARD | USB_RECIP_ENDPOINT:
- *(uint16_t *)buffer = cpu_to_le16(0);
- len = 2;
- break;
- case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
- *(uint32_t *)buffer = cpu_to_le32(0);
- len = 4;
- break;
- case USB_RT_PORT: /* USB_TYPE_CLASS | USB_RECIP_OTHER */
- hprt0 = dwc2_readl(dwc2, HPRT0);
+ if (!buf || len < sizeof(*portsts))
+ return -1;
- if (hprt0 & HPRT0_CONNSTS)
- port_status |= USB_PORT_STAT_CONNECTION;
- if (hprt0 & HPRT0_ENA)
- port_status |= USB_PORT_STAT_ENABLE;
- if (hprt0 & HPRT0_SUSP)
- port_status |= USB_PORT_STAT_SUSPEND;
- if (hprt0 & HPRT0_OVRCURRACT)
- port_status |= USB_PORT_STAT_OVERCURRENT;
- if (hprt0 & HPRT0_RST)
- port_status |= USB_PORT_STAT_RESET;
- if (hprt0 & HPRT0_PWR)
- port_status |= USB_PORT_STAT_POWER;
-
- speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
- if (speed == HPRT0_SPD_HIGH_SPEED)
- port_status |= USB_PORT_STAT_HIGH_SPEED;
- else if (speed == HPRT0_SPD_LOW_SPEED)
- port_status |= USB_PORT_STAT_LOW_SPEED;
-
- if (hprt0 & HPRT0_ENACHG)
- port_change |= USB_PORT_STAT_C_ENABLE;
- if (hprt0 & HPRT0_CONNDET)
- port_change |= USB_PORT_STAT_C_CONNECTION;
- if (hprt0 & HPRT0_OVRCURRCHG)
- port_change |= USB_PORT_STAT_C_OVERCURRENT;
-
- portsts = buffer;
- portsts->wPortStatus = cpu_to_le16(port_status);
- portsts->wPortChange = cpu_to_le16(port_change);
- len = sizeof(*portsts);
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+
+ if (hprt0 & HPRT0_CONNSTS)
+ status |= USB_PORT_STAT_CONNECTION;
+ if (hprt0 & HPRT0_ENA)
+ status |= USB_PORT_STAT_ENABLE;
+ if (hprt0 & HPRT0_SUSP)
+ status |= USB_PORT_STAT_SUSPEND;
+ if (hprt0 & HPRT0_OVRCURRACT)
+ status |= USB_PORT_STAT_OVERCURRENT;
+ if (hprt0 & HPRT0_RST)
+ status |= USB_PORT_STAT_RESET;
+ if (hprt0 & HPRT0_PWR)
+ status |= USB_PORT_STAT_POWER;
+
+ speed = (hprt0 & HPRT0_SPD_MASK) >> HPRT0_SPD_SHIFT;
+ if (speed == HPRT0_SPD_HIGH_SPEED)
+ status |= USB_PORT_STAT_HIGH_SPEED;
+ else if (speed == HPRT0_SPD_LOW_SPEED)
+ status |= USB_PORT_STAT_LOW_SPEED;
+
+ if (hprt0 & HPRT0_ENACHG)
+ change |= USB_PORT_STAT_C_ENABLE;
+ if (hprt0 & HPRT0_CONNDET)
+ change |= USB_PORT_STAT_C_CONNECTION;
+ if (hprt0 & HPRT0_OVRCURRCHG)
+ change |= USB_PORT_STAT_C_OVERCURRENT;
+
+ portsts = buf;
+ portsts->wPortStatus = cpu_to_le16(status);
+ portsts->wPortChange = cpu_to_le16(change);
+
+ dev->act_len = sizeof(*portsts);
+ dev->status = 0;
- break;
- default:
- goto unknown;
- }
+ return 0;
+}
- dev->act_len = min(len, txlen);
- dev->status = 0;
+static int dwc2_get_hub_status(struct dwc2 *dwc2, struct usb_device *dev,
+ void *buf, int len)
+{
+ if (!buf || len < 4)
+ return -1;
+
+ *(uint32_t *)buf = 0;
+ dev->act_len = 4;
+ dev->status = 0;
return 0;
+}
-unknown:
- dev->act_len = 0;
- dev->status = USB_ST_STALLED;
+static int dwc2_get_hub_descriptor(struct dwc2 *dwc2, struct usb_device *dev,
+ void *buf, int len)
+{
+ if (!buf)
+ return -1;
+
+ dev->act_len = min_t(int, len, descriptor.hub.bLength);
+ dev->status = 0;
+ memcpy(buf, &descriptor.hub, dev->act_len);
- return -1;
+ return 0;
}
-static void strtodesc(char *dest, char *src, size_t n)
+static void strle16(__le16 *dest, char *src, size_t n)
{
unsigned int i;
- dest[0] = n;
- dest[1] = 0x3;
- for (i = 2; i < n && *src != '\0'; i += 2) {
- dest[i] = *(src++);
- dest[i + 1] = 0;
- }
+ for (i = 0; i < n && *src != '\0'; i++, src++)
+ dest[i] = cpu_to_le16(*src);
}
-/* Direction: In ; Request: Descriptor */
-static int dwc2_submit_rh_msg_in_descriptor(struct usb_device *dev,
- void *buffer, int txlen,
- struct devrequest *cmd)
+static int dwc2_get_string_descriptor(struct dwc2 *dwc2, struct usb_device *dev,
+ void *buf, int len, int index)
{
- int len = 0;
- char *src;
- uint16_t wValue = le16_to_cpu(cmd->value);
- uint16_t wLength = le16_to_cpu(cmd->length);
-
- switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
- case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
- switch (wValue >> 8) {
- case USB_DT_DEVICE:
- debug("USB_DT_DEVICE request\n");
- len = min3(txlen, (int)descriptor.device.bLength, (int)wLength);
- memcpy(buffer, &descriptor.device, len);
- break;
- case USB_DT_CONFIG:
- debug("USB_DT_CONFIG config\n");
- len = min3(txlen, (int)descriptor.config.wTotalLength, (int)wLength);
- memcpy(buffer, &descriptor.config, len);
- break;
- case USB_DT_STRING:
- debug("USB_DT_STRING: %#x\n", wValue);
- switch (wValue & 0xff) {
- case 0: /* Language */
- src = language_string;
- len = strlen(src) + 2;
- ((char *)buffer)[0] = len;
- ((char *)buffer)[1] = 0x03;
- memcpy(buffer + 2, src, strlen(src));
- break;
- case 1: /* Vendor */
- src = vendor_string;
- len = 2 * strlen(src) + 2;
- strtodesc(buffer, src, len);
- break;
- case 2: /* Product */
- src = product_string;
- len = 2 * strlen(src) + 2;
- strtodesc(buffer, src, len);
- break;
- default:
- debug("%s(): unknown string index 0x%x\n", __func__, wValue & 0xff);
- goto unknown;
- }
- len = min3(txlen, len, (int)wLength);
- break;
- default:
- debug("%s(): unknown requesttype: 0x%x\n", __func__,
- cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK));
- goto unknown;
- }
- break;
+ char *src, *str = buf;
+ __le16 *le16 = (__le16 *)(str + 2);
+ int size;
+
+ if (!buf || len < 2)
+ return -1;
- case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
- debug("USB_RT_HUB\n");
+ switch (index) {
+ case 0: /* Language */
+ src = "\x09\x04";
+ size = strlen(src) + 2;
+ len = min_t(int, len, size);
- len = min3(txlen, (int)descriptor.hub.bLength, (int)wLength);
- memcpy(buffer, &descriptor.hub, len);
+ str[0] = size;
+ str[1] = 0x03;
+ memcpy(str + 2, src, len - 2);
+ break;
+ case 1: /* Vendor */
+ src = "u-boot";
+ size = 2 * strlen(src) + 2;
+ len = min_t(int, len, size);
+
+ str[0] = size;
+ str[1] = 0x03;
+ strle16(le16, src, (len - 2) / 2);
+ break;
+ case 2: /* Product */
+ src = "DWC2 root hub";
+ size = 2 * strlen(src) + 2;
+ len = min_t(int, len, size);
+
+ str[0] = size;
+ str[1] = 0x03;
+ strle16(le16, src, (len - 2) / 2);
break;
default:
- goto unknown;
+ dwc2_err(dwc2, "roothub: unknown string descriptor: 0x%x\n",
+ index);
+ return -1;
}
dev->act_len = len;
dev->status = 0;
return 0;
-
-unknown:
- dev->act_len = 0;
- dev->status = USB_ST_STALLED;
-
- return -1;
}
-/* Direction: In ; Request: Configuration */
-static int dwc2_submit_rh_msg_in_configuration(struct usb_device *dev,
- void *buffer, int txlen,
- struct devrequest *cmd)
+static int dwc2_get_descriptor(struct dwc2 *dwc2, struct usb_device *dev,
+ void *buf, int len, int value)
{
- int len = 0;
+ int index = value >> 8;
+
+ if (!buf || len < 0)
+ return -1;
- switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
- case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
- *(uint8_t *)buffer = 0x01;
- len = min(txlen, 1);
+ switch (index) {
+ case USB_DT_DEVICE:
+ len = min(len, (int)descriptor.device.bLength);
+ memcpy(buf, &descriptor.device, len);
break;
+ case USB_DT_CONFIG:
+ len = min(len, (int)descriptor.config.wTotalLength);
+ memcpy(buf, &descriptor.config, len);
+ break;
+ case USB_DT_STRING:
+ value &= 0xff;
+ return dwc2_get_string_descriptor(dwc2, dev, buf, len, value);
default:
- goto unknown;
+ dwc2_err(dwc2, "roothub: unknown descriptor: 0x%x\n", index);
+ return -1;
}
dev->act_len = len;
dev->status = 0;
return 0;
-
-unknown:
- dev->act_len = 0;
- dev->status = USB_ST_STALLED;
-
- return -1;
}
-/* Direction: In */
-static int dwc2_submit_rh_msg_in(struct dwc2 *dwc2,
- struct usb_device *dev, void *buffer,
- int txlen, struct devrequest *cmd)
+static int dwc2_set_port_feature(struct dwc2 *dwc2, struct usb_device *dev,
+ int feature)
{
- switch (cmd->request) {
- case USB_REQ_GET_STATUS:
- return dwc2_submit_rh_msg_in_status(dwc2, dev, buffer,
- txlen, cmd);
- case USB_REQ_GET_DESCRIPTOR:
- return dwc2_submit_rh_msg_in_descriptor(dev, buffer,
- txlen, cmd);
- case USB_REQ_GET_CONFIGURATION:
- return dwc2_submit_rh_msg_in_configuration(dev, buffer,
- txlen, cmd);
- default:
- dev->act_len = 0;
- dev->status = USB_ST_STALLED;
+ uint32_t hprt0;
+
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+
+ switch (feature) {
+ case USB_PORT_FEAT_SUSPEND:
+ break;
+ case USB_PORT_FEAT_RESET:
+ hprt0 |= HPRT0_RST;
+ dwc2_writel(dwc2, hprt0, HPRT0);
+
+ mdelay(60);
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~HPRT0_RST;
+ dwc2_writel(dwc2, hprt0, HPRT0);
+ break;
+ case USB_PORT_FEAT_POWER:
+ break;
+ case USB_PORT_FEAT_ENABLE:
+ /* Set by the core after a reset */
+ break;
+ default:
+ dwc2_dbg(dwc2, "roothub: unsupported set port feature 0x%x\n",
+ feature);
return -1;
}
+
+ dev->act_len = 0;
+ dev->status = 0;
+
+ return 0;
}
-/* Direction: Out */
-static int dwc2_submit_rh_msg_out(struct dwc2 *dwc2,
- struct usb_device *dev,
- void *buffer, int txlen,
- struct devrequest *cmd)
+static int dwc2_clear_port_feature(struct dwc2 *dwc2, struct usb_device *dev,
+ int feature)
{
- uint16_t wValue = le16_to_cpu(cmd->value);
uint32_t hprt0;
- switch (cmd->requesttype & (USB_TYPE_MASK | USB_RECIP_MASK)) {
- case USB_TYPE_STANDARD | USB_RECIP_DEVICE:
- switch (cmd->request) {
- case USB_REQ_SET_ADDRESS:
- dwc2_dbg(dwc2, "set root hub addr %d\n", wValue);
- dwc2->root_hub_devnum = wValue;
- break;
- case USB_REQ_SET_CONFIGURATION:
- break;
- default:
- goto unknown;
- }
+ hprt0 = dwc2_readl(dwc2, HPRT0);
+ hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
+
+ switch (feature) {
+ case USB_PORT_FEAT_ENABLE:
+ hprt0 |= HPRT0_ENA;
+ break;
+ case USB_PORT_FEAT_SUSPEND:
+ break;
+ case USB_PORT_FEAT_POWER:
break;
- case USB_TYPE_STANDARD | USB_RECIP_ENDPOINT:
- case USB_RT_HUB: /* USB_TYPE_CLASS | USB_RECIP_DEVICE */
- switch (cmd->request) {
- case USB_REQ_CLEAR_FEATURE:
- break;
- }
+ case USB_PORT_FEAT_C_CONNECTION:
+ hprt0 |= HPRT0_CONNDET;
break;
- case USB_RT_PORT: /* USB_TYPE_CLASS | USB_RECIP_OTHER */
- switch (cmd->request) {
- case USB_REQ_CLEAR_FEATURE:
- hprt0 = dwc2_readl(dwc2, HPRT0);
- hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET
- | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
- switch (wValue) {
- case USB_PORT_FEAT_ENABLE:
- hprt0 |= HPRT0_ENA;
- break;
- case USB_PORT_FEAT_SUSPEND:
- break;
- case USB_PORT_FEAT_POWER:
- break;
- case USB_PORT_FEAT_C_CONNECTION:
- hprt0 |= HPRT0_CONNDET;
- break;
- case USB_PORT_FEAT_C_ENABLE:
- hprt0 |= HPRT0_ENACHG;
- break;
- case USB_PORT_FEAT_C_OVER_CURRENT:
- hprt0 |= HPRT0_OVRCURRCHG;
- break;
- default:
- dwc2_dbg(dwc2, "unknown feature 0x%x\n", wValue);
- goto unknown;
- }
- dwc2_writel(dwc2, hprt0, HPRT0);
- break;
- case USB_REQ_SET_FEATURE:
- hprt0 = dwc2_readl(dwc2, HPRT0);
- hprt0 &= ~(HPRT0_ENA | HPRT0_CONNDET
- | HPRT0_ENACHG | HPRT0_OVRCURRCHG);
- switch (wValue) {
- case USB_PORT_FEAT_SUSPEND:
- break;
- case USB_PORT_FEAT_RESET:
- hprt0 |= HPRT0_RST;
- dwc2_writel(dwc2, hprt0, HPRT0);
-
- mdelay(60);
-
- hprt0 = dwc2_readl(dwc2, HPRT0);
- hprt0 &= ~HPRT0_RST;
- dwc2_writel(dwc2, hprt0, HPRT0);
- break;
- case USB_PORT_FEAT_POWER:
- break;
- case USB_PORT_FEAT_ENABLE:
- /* Set by the core after a reset */
- break;
- default:
- dwc2_dbg(dwc2, "unknown feature 0x%x\n", wValue);
- goto unknown;
- }
- break;
- default: goto unknown;
- }
+ case USB_PORT_FEAT_C_ENABLE:
+ hprt0 |= HPRT0_ENACHG;
+ break;
+ case USB_PORT_FEAT_C_OVER_CURRENT:
+ hprt0 |= HPRT0_OVRCURRCHG;
break;
default:
- goto unknown;
+ dwc2_dbg(dwc2, "roothub: unsupported clear port feature 0x%x\n",
+ feature);
+ return -1;
}
+ dwc2_writel(dwc2, hprt0, HPRT0);
+
dev->act_len = 0;
dev->status = 0;
return 0;
+}
+
+static int dwc2_set_address(struct dwc2 *dwc2, struct usb_device *dev, int addr)
+{
+ dwc2_dbg(dwc2, "roothub: set address to %d\n", addr);
+ dwc2->root_hub_devnum = addr;
-unknown:
dev->act_len = 0;
- dev->status = USB_ST_STALLED;
- return -1;
+ dev->status = 0;
+
+ return 0;
}
-int
-dwc2_submit_rh_msg(struct dwc2 *dwc2, struct usb_device *dev,
- unsigned long pipe, void *buffer, int txlen,
- struct devrequest *cmd)
+int dwc2_submit_roothub(struct dwc2 *dwc2, struct usb_device *dev,
+ unsigned long pipe, void *buf, int len,
+ struct devrequest *setup)
{
- int stat = 0;
+ unsigned char reqtype = setup->requesttype;
+ unsigned char request = setup->request;
+ unsigned short value = le16_to_cpu(setup->value);
+ unsigned short size = le16_to_cpu(setup->length);
+ int minlen = min_t(int, len, size);
if (usb_pipeint(pipe)) {
- dwc2_err(dwc2, "Root-Hub submit IRQ: NOT implemented\n");
+ dwc2_err(dwc2, "roothub: submit IRQ NOT implemented\n");
return 0;
}
- if (cmd->requesttype & USB_DIR_IN)
- stat = dwc2_submit_rh_msg_in(dwc2, dev, buffer, txlen, cmd);
- else
- stat = dwc2_submit_rh_msg_out(dwc2, dev, buffer, txlen, cmd);
+ dev->act_len = 0;
+ dev->status = USB_ST_STALLED;
+
+#define REQ(l, u) ((l) | ((u) << 8))
+
+ switch (REQ(request, reqtype)) {
+ case REQ(USB_REQ_GET_DESCRIPTOR, USB_DIR_IN | USB_RT_HUB):
+ return dwc2_get_hub_descriptor(dwc2, dev, buf, minlen);
+
+ case REQ(USB_REQ_GET_DESCRIPTOR, USB_DIR_IN):
+ return dwc2_get_descriptor(dwc2, dev, buf, minlen, value);
+
+ case REQ(USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_HUB):
+ return dwc2_get_hub_status(dwc2, dev, buf, len);
+
+ case REQ(USB_REQ_GET_STATUS, USB_DIR_IN | USB_RT_PORT):
+ return dwc2_get_port_status(dwc2, dev, buf, len);
- mdelay(1);
- return stat;
+ case REQ(USB_REQ_SET_FEATURE, USB_DIR_OUT | USB_RT_PORT):
+ return dwc2_set_port_feature(dwc2, dev, value);
+
+ case REQ(USB_REQ_CLEAR_FEATURE, USB_DIR_OUT | USB_RT_PORT):
+ return dwc2_clear_port_feature(dwc2, dev, value);
+
+ case REQ(USB_REQ_SET_ADDRESS, USB_DIR_OUT):
+ return dwc2_set_address(dwc2, dev, value);
+
+ case REQ(USB_REQ_SET_CONFIGURATION, USB_DIR_OUT):
+ dev->act_len = 0;
+ dev->status = 0;
+ return 0;
+
+ case REQ(USB_REQ_GET_CONFIGURATION, USB_DIR_IN):
+ *(char *)buf = 1;
+ dev->act_len = 1;
+ dev->status = 0;
+ return 0;
+ }
+
+ dwc2_err(dwc2, "roothub: unsupported request 0x%x requesttype 0x%x\n",
+ request, reqtype);
+
+ return 0;
}
--
2.21.0.196.g041f5ea
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 11+ messages in thread