From: Oleksij Rempel <o.rempel@pengutronix.de>
To: antonynpavlov@gmail.com, barebox@lists.infradead.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
Peter Mamonov <pmamonov@gmail.com>
Subject: [PATCH v3] MIPS: remove .bss to __rel_start overlay
Date: Wed, 29 Jan 2020 06:27:37 +0100 [thread overview]
Message-ID: <20200129052737.1434-1-o.rempel@pengutronix.de> (raw)
.bss __rel_start (OVERLAY) was used to optimize RAM size used by
barebox. Since .bss and __rel_start overlap, we should clear bss only
after __rel_start was used. Following patch changed initialization
sequence to clear .bss before __rel_start:
1e5aef61fc6a444 ("MIPS: reloc: init bss and cpu")
This make relocation buffer unusable and broke relocation with different
symptoms reported by Antony Pavlov <antonynpavlov@gmail.com>:
* iomem output has no information on sdram regions, so memtest is unusable;
* pc = 0xa081232c, relocation does not work, barebox is located with 8M offset
from start of RAM. The board has 256M and relocation routine
should move barebox code much higher;
* pc = 0xa081232c, so barebox code works from KSEG1 not from KSEG0 as MMU=y option implies.
There is a choice of moving .bss clear sequence after __rel_start or
remove this optimization. Since the use of this optimization is minimal
and danger to trap in to similar issue is still high, i prefer to remove
this optimization.
As result of this change, we need to fix calculation of relocation are
size:
relocate_code() calculates relocation area size as a sum (barebox_image_size +
bss_len). barebox_image_size and bss_len are calculated as (__image_end -
__image_start) and (__bss_stop - __bss_start) respectively. This doesn't take
into account relocation data placed between __image_end and __bss_start.
However relocation preserves BSS position relative to image start, as if
relocation data is still there. This causes RAM overflow during BSS
initialization in main_entry(). This problem may be hidden due to the alignment
of the `relocaddr`.
Reported-by: Antony Pavlov <antonynpavlov@gmail.com>
Fixes: 1e5aef61fc6a444 ("MIPS: reloc: init bss and cpu")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
---
arch/mips/lib/barebox.lds.S | 2 +-
arch/mips/lib/reloc.c | 2 +-
2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/mips/lib/barebox.lds.S b/arch/mips/lib/barebox.lds.S
index 693a778980..c954df41f3 100644
--- a/arch/mips/lib/barebox.lds.S
+++ b/arch/mips/lib/barebox.lds.S
@@ -59,7 +59,7 @@ SECTIONS
_end = .;
- .bss __rel_start (OVERLAY) : {
+ .bss : {
__bss_start = .;
*(.sbss.*)
*(.bss.*)
diff --git a/arch/mips/lib/reloc.c b/arch/mips/lib/reloc.c
index df9760e38c..4b0e252352 100644
--- a/arch/mips/lib/reloc.c
+++ b/arch/mips/lib/reloc.c
@@ -118,7 +118,7 @@ void relocate_code(void *fdt, u32 fdt_size, u32 ram_size)
memset(__bss_start, 0, bss_len);
cpu_probe();
- length = barebox_image_size + bss_len;
+ length = __bss_stop - __image_start;
relocaddr = ALIGN_DOWN(ram_size - length, SZ_64K);
relocaddr = KSEG0ADDR(relocaddr);
new_stack = relocaddr - MALLOC_SIZE - 16;
--
2.25.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2020-01-29 5:27 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-01-29 5:27 Oleksij Rempel [this message]
2020-01-29 11:20 ` Peter Mamonov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200129052737.1434-1-o.rempel@pengutronix.de \
--to=o.rempel@pengutronix.de \
--cc=antonynpavlov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=pmamonov@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox