mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: antonynpavlov@gmail.com, barebox@lists.infradead.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	Peter Mamonov <pmamonov@gmail.com>
Subject: [PATCH v4] MIPS: don't overlay relocation data with BSS
Date: Thu, 30 Jan 2020 08:38:57 +0100	[thread overview]
Message-ID: <20200130073857.18396-1-o.rempel@pengutronix.de> (raw)

.bss __rel_start (OVERLAY) was used to optimize RAM size used by
barebox. Since .bss and __rel_start overlap, we should clear bss only
after __rel_start was used. Following patch changed initialization
sequence to clear .bss before __rel_start:
1e5aef61fc6a444 ("MIPS: reloc: init bss and cpu")

This make relocation buffer unusable and broke relocation with different
symptoms reported by Antony Pavlov <antonynpavlov@gmail.com>:
  * iomem output has no information on sdram regions, so memtest is unusable;
  * pc = 0xa081232c, relocation does not work, barebox is located with 8M offset
    from start of RAM. The board has 256M and relocation routine
    should move barebox code much higher;
  * pc = 0xa081232c, so barebox code works from KSEG1 not from KSEG0 as MMU=y option implies.

There is a choice of moving .bss clear sequence after __rel_start or
remove this optimization. Since the use of this optimization is minimal
and danger to trap in to similar issue is still high, i prefer to remove
this optimization.

As result of this change, we need to fix calculation of relocation are
size:
relocate_code() calculates relocation area size as a sum (barebox_image_size +
bss_len). barebox_image_size and bss_len are calculated as (__image_end -
__image_start) and (__bss_stop - __bss_start) respectively. This doesn't take
into account relocation data placed between  __image_end and __bss_start.
However relocation preserves BSS position relative to image start, as if
relocation data is still there. This causes RAM overflow during BSS
initialization in main_entry(). This problem may be hidden due to the alignment
of the `relocaddr`.

Reported-by: Antony Pavlov <antonynpavlov@gmail.com>
Fixes: 1e5aef61fc6a444 ("MIPS: reloc: init bss and cpu")
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
---
 arch/mips/lib/barebox.lds.S | 2 +-
 arch/mips/lib/reloc.c       | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/mips/lib/barebox.lds.S b/arch/mips/lib/barebox.lds.S
index 693a778980..c954df41f3 100644
--- a/arch/mips/lib/barebox.lds.S
+++ b/arch/mips/lib/barebox.lds.S
@@ -59,7 +59,7 @@ SECTIONS
 
 	_end = .;
 
-	.bss __rel_start (OVERLAY) : {
+	.bss : {
 		__bss_start = .;
 		*(.sbss.*)
 		*(.bss.*)
diff --git a/arch/mips/lib/reloc.c b/arch/mips/lib/reloc.c
index df9760e38c..4b0e252352 100644
--- a/arch/mips/lib/reloc.c
+++ b/arch/mips/lib/reloc.c
@@ -118,7 +118,7 @@ void relocate_code(void *fdt, u32 fdt_size, u32 ram_size)
 	memset(__bss_start, 0, bss_len);
 	cpu_probe();
 
-	length = barebox_image_size + bss_len;
+	length = __bss_stop - __image_start;
 	relocaddr = ALIGN_DOWN(ram_size - length, SZ_64K);
 	relocaddr = KSEG0ADDR(relocaddr);
 	new_stack = relocaddr - MALLOC_SIZE - 16;
-- 
2.25.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2020-01-30  7:39 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-01-30  7:38 Oleksij Rempel [this message]
2020-02-03  8:18 ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200130073857.18396-1-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=antonynpavlov@gmail.com \
    --cc=barebox@lists.infradead.org \
    --cc=pmamonov@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox