From: Sam Ravnborg <sam@ravnborg.org>
To: Ahmad Fatoum <a.fatoum@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH 1/2] ARM: at91: add support for SAM9 SoC reset
Date: Thu, 5 Mar 2020 21:29:29 +0100 [thread overview]
Message-ID: <20200305202929.GA20581@ravnborg.org> (raw)
In-Reply-To: <20200305080225.19103-1-a.fatoum@pengutronix.de>
Hi Ahmad.
On Thu, Mar 05, 2020 at 09:02:24AM +0100, Ahmad Fatoum wrote:
> System reset wasn't supported on the sama5 so far.
> Add a driver to remedy this.
>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Looked through the patch - everything looked good.
One question below.
With the question considered:
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Sam
> ---
> arch/arm/mach-at91/Kconfig | 5 +++
> arch/arm/mach-at91/Makefile | 1 +
> arch/arm/mach-at91/at91sam9_rst.c | 74 +++++++++++++++++++++++++++++++
> 3 files changed, 80 insertions(+)
> create mode 100644 arch/arm/mach-at91/at91sam9_rst.c
>
> diff --git a/arch/arm/mach-at91/Kconfig b/arch/arm/mach-at91/Kconfig
> index 5267102bf94e..0eb5410664bb 100644
> --- a/arch/arm/mach-at91/Kconfig
> +++ b/arch/arm/mach-at91/Kconfig
> @@ -41,12 +41,16 @@ config AT91SAM926X_BOARD_INIT
> config AT91SAM9_SMC
> bool
>
> +config HAVE_AT91SAM9_RST
> + bool
> +
> config SOC_AT91SAM9
> bool
> select CPU_ARM926T
> select AT91SAM9_SMC
> select CLOCKSOURCE_ATMEL_PIT
> select PINCTRL
> + select HAVE_AT91SAM9_RST
> select HAVE_AT91_SMD
> select HAVE_AT91_USB_CLK
> select HAVE_AT91_UTMI
> @@ -54,6 +58,7 @@ config SOC_AT91SAM9
>
> config SOC_SAMA5
> bool
> + select HAVE_AT91SAM9_RST
> select CPU_V7
>
> config SOC_SAMA5D2
> diff --git a/arch/arm/mach-at91/Makefile b/arch/arm/mach-at91/Makefile
> index 66d0b700f61e..89aff54b8af7 100644
> --- a/arch/arm/mach-at91/Makefile
> +++ b/arch/arm/mach-at91/Makefile
> @@ -13,6 +13,7 @@ obj-y += at91sam9_reset.o
> obj-y += at91sam9g45_reset.o
>
> obj-$(CONFIG_AT91SAM9_SMC) += sam9_smc.o
> +obj-$(CONFIG_HAVE_AT91SAM9_RST) += at91sam9_rst.o
>
> # CPU-specific support
> obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o at91rm9200_time.o at91rm9200_devices.o
> diff --git a/arch/arm/mach-at91/at91sam9_rst.c b/arch/arm/mach-at91/at91sam9_rst.c
> new file mode 100644
> index 000000000000..cd266052c98d
> --- /dev/null
> +++ b/arch/arm/mach-at91/at91sam9_rst.c
> @@ -0,0 +1,74 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2019 Pengutronix, Ahmad Fatoum <a.fatoum@pengutronix.de>
> + */
> +
> +#include <common.h>
> +#include <init.h>
> +#include <io.h>
> +#include <restart.h>
> +#include <linux/clk.h>
> +#include <mach/at91_rstc.h>
> +
> +struct at91sam9x_rst {
> + struct restart_handler restart;
> + void __iomem *base;
> +};
> +
> +static void __noreturn at91sam9x_restart_soc(struct restart_handler *rst)
> +{
> + struct at91sam9x_rst *priv = container_of(rst, struct at91sam9x_rst, restart);
> +
> + writel(AT91_RSTC_PROCRST
> + | AT91_RSTC_PERRST
> + | AT91_RSTC_EXTRST
> + | AT91_RSTC_KEY,
> + priv->base + AT91_RSTC_CR);
> +
> + hang();
> +}
> +
> +static int at91sam9x_rst_probe(struct device_d *dev)
> +{
> + struct at91sam9x_rst *priv;
> + struct resource *iores;
> + struct clk *clk;
> +
> + iores = dev_request_mem_resource(dev, 0);
> + if (IS_ERR(iores)) {
> + dev_err(dev, "could not get reset memory region\n");
> + return PTR_ERR(iores);
> + }
> +
> + priv = xzalloc(sizeof(*priv));
> + priv->base = IOMEM(iores->start);
> +
> + clk = clk_get(dev, NULL);
> + if (IS_ERR(clk)) {
> + release_region(iores);
> + free(priv);
> + return PTR_ERR(clk);
> + }
> +
> + clk_enable(clk);
> +
> + priv->restart.name = "at91sam9x_rst";
Or the driver name:
at91sam9x-rst?
> + priv->restart.restart = at91sam9x_restart_soc;
> +
> + restart_handler_register(&priv->restart);
> +
> + return 0;
> +}
> +
> +static const __maybe_unused struct of_device_id at91sam9x_rst_dt_ids[] = {
> + { .compatible = "atmel,at91sam9g45-rstc", },
> + { .compatible = "atmel,sama5d3-rstc", },
> + { /* sentinel */ },
> +};
> +
> +static struct driver_d at91sam9x_rst_driver = {
> + .name = "at91sam9x-rst",
> + .of_compatible = DRV_OF_COMPAT(at91sam9x_rst_dt_ids),
> + .probe = at91sam9x_rst_probe,
> +};
> +device_platform_driver(at91sam9x_rst_driver);
> --
> 2.25.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-03-05 20:31 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-05 8:02 Ahmad Fatoum
2020-03-05 8:02 ` [PATCH 2/2] ARM: at91: add sama5d27-based Groboards Giant Board support Ahmad Fatoum
2020-03-05 20:37 ` Sam Ravnborg
2020-03-06 6:06 ` Ahmad Fatoum
2020-03-08 21:38 ` Sam Ravnborg
2020-03-05 20:29 ` Sam Ravnborg [this message]
2020-03-06 6:00 ` [PATCH 1/2] ARM: at91: add support for SAM9 SoC reset Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200305202929.GA20581@ravnborg.org \
--to=sam@ravnborg.org \
--cc=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox