From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Cc: "Edmund Henniges" <eh@emlix.com>, "Daniel Glöckner" <dg@emlix.com>
Subject: [PATCH 3/8] net: mdiobus: Add slice
Date: Fri, 6 Mar 2020 20:34:01 +0100 [thread overview]
Message-ID: <20200306193406.20531-4-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200306193406.20531-1-s.hauer@pengutronix.de>
By adding a slice to the mdio bus we make the mdio code safe for being
called in a poller.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/net/phy/mdio_bus.c | 40 ++++++++++++++++++++++++++++++++++++++
drivers/net/phy/phy.c | 2 ++
include/linux/phy.h | 32 ++++++++++--------------------
3 files changed, 52 insertions(+), 22 deletions(-)
diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c
index 3480e2ffb4..30c2e1f409 100644
--- a/drivers/net/phy/mdio_bus.c
+++ b/drivers/net/phy/mdio_bus.c
@@ -232,6 +232,7 @@ int mdiobus_register(struct mii_bus *bus)
dev_set_name(&bus->dev, "miibus");
bus->dev.parent = bus->parent;
bus->dev.detect = mdiobus_detect;
+ slice_init(&bus->slice, &bus->dev);
err = register_device(&bus->dev);
if (err) {
@@ -357,6 +358,45 @@ static int mdio_bus_match(struct device_d *dev, struct driver_d *drv)
return 1;
}
+/**
+ * mdiobus_read - Convenience function for reading a given MII mgmt register
+ * @bus: the mii_bus struct
+ * @addr: the phy address
+ * @regnum: register number to read
+ */
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
+{
+ int ret;
+
+ slice_acquire(&bus->slice);
+
+ ret = bus->read(bus, addr, regnum);
+
+ slice_release(&bus->slice);
+
+ return ret;
+}
+
+/**
+ * mdiobus_write - Convenience function for writing a given MII mgmt register
+ * @bus: the mii_bus struct
+ * @addr: the phy address
+ * @regnum: register number to write
+ * @val: value to write to @regnum
+ */
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
+{
+ int ret;
+
+ slice_acquire(&bus->slice);
+
+ ret = bus->write(bus, addr, regnum, val);
+
+ slice_release(&bus->slice);
+
+ return ret;
+}
+
static ssize_t phydev_read(struct cdev *cdev, void *_buf, size_t count, loff_t offset, ulong flags)
{
int i = count;
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c
index ccdc9f3716..3425f02721 100644
--- a/drivers/net/phy/phy.c
+++ b/drivers/net/phy/phy.c
@@ -389,6 +389,8 @@ static int phy_device_attach(struct phy_device *phy, struct eth_device *edev,
if (ret)
return ret;
+ slice_add(eth_device_slice(edev), &phy->bus->slice);
+
/* Sanitize settings based on PHY capabilities */
if ((phy->supported & SUPPORTED_Autoneg) == 0)
phy->autoneg = AUTONEG_DISABLE;
diff --git a/include/linux/phy.h b/include/linux/phy.h
index a9fdf44f1a..48502caffa 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -16,6 +16,7 @@
#define __PHY_H
#include <driver.h>
+#include <slice.h>
#include <linux/list.h>
#include <linux/ethtool.h>
#include <linux/mii.h>
@@ -116,9 +117,16 @@ struct mii_bus {
struct list_head list;
bool is_multiplexed;
+
+ struct slice slice;
};
#define to_mii_bus(d) container_of(d, struct mii_bus, dev)
+static inline struct slice *mdiobus_slice(struct mii_bus *bus)
+{
+ return &bus->slice;
+}
+
int mdiobus_register(struct mii_bus *bus);
void mdiobus_unregister(struct mii_bus *bus);
struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr);
@@ -134,28 +142,8 @@ struct mii_bus *mdiobus_get_bus(int busnum);
struct mii_bus *of_mdio_find_bus(struct device_node *mdio_bus_np);
-/**
- * mdiobus_read - Convenience function for reading a given MII mgmt register
- * @bus: the mii_bus struct
- * @addr: the phy address
- * @regnum: register number to read
- */
-static inline int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum)
-{
- return bus->read(bus, addr, regnum);
-}
-
-/**
- * mdiobus_write - Convenience function for writing a given MII mgmt register
- * @bus: the mii_bus struct
- * @addr: the phy address
- * @regnum: register number to write
- * @val: value to write to @regnum
- */
-static inline int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val)
-{
- return bus->write(bus, addr, regnum, val);
-}
+int mdiobus_read(struct mii_bus *bus, int addr, u32 regnum);
+int mdiobus_write(struct mii_bus *bus, int addr, u32 regnum, u16 val);
/* phy_device: An instance of a PHY
*
--
2.25.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-03-06 19:34 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-06 19:33 Protect code from pollers Sascha Hauer
2020-03-06 19:33 ` [PATCH 1/8] Introduce slices Sascha Hauer
2020-03-09 14:49 ` Daniel Glöckner
2020-03-10 10:10 ` Sascha Hauer
2020-03-06 19:34 ` [PATCH 2/8] net: Add a slice to struct eth_device Sascha Hauer
2020-03-06 19:34 ` Sascha Hauer [this message]
2020-03-06 19:34 ` [PATCH 4/8] usb: Add a slice to usb host controllers Sascha Hauer
2020-03-06 19:34 ` [PATCH 5/8] usbnet: Add slice Sascha Hauer
2020-03-06 19:34 ` [PATCH 6/8] net: Call net_poll() in a poller Sascha Hauer
2020-03-06 19:34 ` [PATCH 7/8] net: reply to ping requests Sascha Hauer
2020-03-06 19:34 ` [PATCH 8/8] usbnet: Be more friendly in the receive path Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200306193406.20531-4-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=dg@emlix.com \
--cc=eh@emlix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox