From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 04/24] usb: Remove hack from the early days
Date: Wed, 25 Mar 2020 13:30:51 +0100 [thread overview]
Message-ID: <20200325123111.9612-5-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200325123111.9612-1-s.hauer@pengutronix.de>
The weird hack about "bad shielded USB devices" goes back to the initial
U-Boot git commmit. Let's be bold and remove it 18 years later.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/core/hub.c | 12 ------------
1 file changed, 12 deletions(-)
diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index cc0c4c04d5..0569d0f94b 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -327,18 +327,6 @@ static void usb_scan_port(struct usb_device_scan *usb_scan)
port + 1, portstatus);
usb_clear_port_feature(dev, port + 1,
USB_PORT_FEAT_C_ENABLE);
-
- /* EM interference sometimes causes bad shielded USB
- * devices to be shutdown by the hub, this hack enables
- * them again. Works at least with mouse driver */
- if (!(portstatus & USB_PORT_STAT_ENABLE) &&
- (portstatus & USB_PORT_STAT_CONNECTION) &&
- ((dev->children[port]))) {
- dev_dbg(&dev->dev, "port%d: already running, "
- "disabled by hub (EMI?), "
- "re-enabling...\n", port + 1);
- usb_hub_port_connect_change(dev, port);
- }
}
if (portstatus & USB_PORT_STAT_SUSPEND) {
--
2.26.0.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-03-25 12:31 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-03-25 12:30 [PATCH 00/24] USB3 support Sascha Hauer
2020-03-25 12:30 ` [PATCH 01/24] usb: hub: Make debugging output more consistent Sascha Hauer
2020-03-25 12:30 ` [PATCH 02/24] usb: hub: do not reset devices twice Sascha Hauer
2020-03-25 12:30 ` [PATCH 03/24] usb: hub: let usb_scan_port() return void Sascha Hauer
2020-03-25 12:30 ` Sascha Hauer [this message]
2020-03-25 12:30 ` [PATCH 05/24] usb: Pass portstatus/portchange to usb_hub_port_connect_change() Sascha Hauer
2020-03-25 12:30 ` [PATCH 06/24] usb: hub: Do not power-cycle usb devices on init Sascha Hauer
2020-03-25 12:30 ` [PATCH 07/24] usb: Make driver_info const Sascha Hauer
2020-03-25 12:30 ` [PATCH 08/24] usb: Set new USB device name earlier Sascha Hauer
2020-03-25 12:30 ` [PATCH 09/24] usb: Use dev_* Sascha Hauer
2020-03-25 12:30 ` [PATCH 10/24] usb: hub: Parse and save TT details from device descriptor Sascha Hauer
2020-03-25 12:30 ` [PATCH 11/24] usb: host: make init hook optional Sascha Hauer
2020-03-25 12:30 ` [PATCH 12/24] usb: support set hub depth request for USB 3.0 hubs Sascha Hauer
2020-03-25 12:31 ` [PATCH 13/24] usb: Assign dev_index once Sascha Hauer
2020-03-25 12:31 ` [PATCH 14/24] usb: remove unnecessary variable Sascha Hauer
2020-03-25 12:31 ` [PATCH 15/24] usb: net: Allocate rx buffer dynamically Sascha Hauer
2020-03-25 14:18 ` Jules Maselbas
2020-03-26 6:22 ` Sascha Hauer
2020-03-25 12:31 ` [PATCH 16/24] usb: net: Allocate tx " Sascha Hauer
2020-03-25 12:31 ` [PATCH 17/24] net: usb: add hook for link changes Sascha Hauer
2020-03-25 12:31 ` [PATCH 18/24] usb: net: Add support for the Asix AX88179 Sascha Hauer
2020-03-25 12:31 ` [PATCH 19/24] usb: factor out a usb_setup_descriptor() function Sascha Hauer
2020-03-25 12:31 ` [PATCH 20/24] usb: hub: Translate USB 3.0 hub port status into old version Sascha Hauer
2020-03-25 12:31 ` [PATCH 21/24] usb: Add super speed support Sascha Hauer
2020-03-25 12:31 ` [PATCH 22/24] usb: hub: When no connection came up remove from scanning list Sascha Hauer
2020-03-25 12:31 ` [PATCH 23/24] usb: host: remove xhci driver Sascha Hauer
2020-03-25 12:31 ` [PATCH 24/24] usb: Add U-Boot " Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200325123111.9612-5-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox