From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH 15/21] clk: at91: compile dt-compat for all platforms that require it
Date: Mon, 13 Apr 2020 09:51:58 +0200 [thread overview]
Message-ID: <20200413075204.17544-16-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20200413075204.17544-1-a.fatoum@pengutronix.de>
We have so far compiled in dt-compat only for CONFIG_SOC_SAMA5D3,
but we require it for device tree support of CONFIG_SOC_AT91SAM9
as well. Fix this.
While at it move around the obj- rules a bit to minimize the diff to
upstream.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
drivers/clk/at91/Makefile | 10 ++++------
1 file changed, 4 insertions(+), 6 deletions(-)
diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 593d34e3487e..d07baedf580c 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -12,9 +12,7 @@ obj-$(CONFIG_HAVE_AT91_USB_CLK) += clk-usb.o
obj-$(CONFIG_HAVE_AT91_SMD) += clk-smd.o
obj-$(CONFIG_HAVE_AT91_H32MX) += clk-h32mx.o
obj-$(CONFIG_HAVE_AT91_GENERATED_CLK) += clk-generated.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9rl.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9x5.o
-obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
-obj-$(CONFIG_SOC_SAMA5D3) += dt-compat.o
-obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o dt-compat.o
+obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
+obj-$(CONFIG_SOC_SAMA5D3) += dt-compat.o
+obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
--
2.26.0.rc2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-04-13 7:52 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-04-13 7:51 [PATCH 00/21] clk: at91: sync with Linux v5.6 Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 01/21] mfd: syscon: enable specified clocks on syscon_base_lookup_by_phandle Ahmad Fatoum
2020-04-15 9:15 ` Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 02/21] mfd: syscon: refactor of_syscon_register compatible check Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 03/21] mfd: syscon: implement device_node_to_regmap Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 04/21] regmap: retire of_node_to_regmap in favor of device_node_to_regmap Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 05/21] ARM: include: remove unused <asm/processor.h> Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 06/21] treewide: use cpu_relax() where appropriate Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 07/21] of: port Linux of_get_compatible_child helper Ahmad Fatoum
2020-04-14 6:46 ` Sascha Hauer
2020-04-14 7:29 ` Ahmad Fatoum
2020-04-14 9:44 ` Michael Tretter
2020-04-14 15:41 ` [PATCH] fixup! " Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 08/21] clk: implement clk_register_fixed_rate Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 09/21] clk: add clk_unregister stub Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 10/21] include: linux/kernel.h: port DIV_ROUND_CLOSEST_ULL definition Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 11/21] clk: migrate to SPDX-License-Identifier use Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 12/21] clk: at91: fix masterck name Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 13/21] clk: at91: fix possible deadlock Ahmad Fatoum
2020-04-13 7:51 ` [PATCH 14/21] clk: at91: delete no-longer required DT compat code Ahmad Fatoum
2020-04-13 7:51 ` Ahmad Fatoum [this message]
2020-04-13 7:51 ` [PATCH 16/21] clk: at91: add __init marker where appropriate Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 17/21] clk: at91: Mark struct clk_range as const Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 18/21] clk: at91: allow 24 Mhz clock as input for PLL Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 19/21] clk: at91: add sama5d2 audio PLL support Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 20/21] clk: at91: port Linux v5.6 SAM9X60 (new ARM926EJ-S) clock support Ahmad Fatoum
2020-04-13 7:52 ` [PATCH 21/21] clk: at91: sckc: fix off-by-1000 in udelay() Ahmad Fatoum
2020-04-15 9:23 ` [PATCH 00/21] clk: at91: sync with Linux v5.6 Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200413075204.17544-16-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox