From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 12/13] usb: i.MX: Add i.MX28 support
Date: Wed, 6 May 2020 10:17:15 +0200 [thread overview]
Message-ID: <20200506081716.20143-12-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200506081716.20143-1-s.hauer@pengutronix.de>
The existing i.MX chipidea support can be used for i.MX28 as well. The
main difference is that the i.MX28 doesn't have a usbmisc unit, so the
bulk of this patch makes this unit optional in the driver.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
drivers/usb/imx/Kconfig | 8 +++--
drivers/usb/imx/Makefile | 3 +-
drivers/usb/imx/chipidea-imx.c | 60 +++++++++++++++++++++++++---------
include/usb/chipidea-imx.h | 13 ++++++++
4 files changed, 66 insertions(+), 18 deletions(-)
diff --git a/drivers/usb/imx/Kconfig b/drivers/usb/imx/Kconfig
index 34f35e0ff6..2b9e63b21c 100644
--- a/drivers/usb/imx/Kconfig
+++ b/drivers/usb/imx/Kconfig
@@ -1,7 +1,7 @@
config USB_IMX_CHIPIDEA
bool "i.MX USB support (read help)"
- depends on ARCH_IMX
+ depends on ARCH_IMX || ARCH_MXS
select USB_OTGDEV
help
The Freescale i.MX SoCs have a variant of the chipidea ci13xxx for
@@ -15,8 +15,12 @@ config USB_IMX_CHIPIDEA
support to work.
It's safe to say yes here. Also select EHCI support for USB host.
+config USB_IMX_CHIPIDEA_USBMISC
+ bool
+ default y if ARCH_IMX
+
config USB_IMX_PHY
bool
- default y if (ARCH_IMX6 || ARCH_VF610) && GENERIC_PHY
+ default y if (ARCH_IMX6 || ARCH_VF610 || ARCH_MXS) && GENERIC_PHY
select STMP_DEVICE
select MFD_SYSCON
diff --git a/drivers/usb/imx/Makefile b/drivers/usb/imx/Makefile
index e15bc711a9..ac17e91e99 100644
--- a/drivers/usb/imx/Makefile
+++ b/drivers/usb/imx/Makefile
@@ -1,2 +1,3 @@
-obj-$(CONFIG_USB_IMX_CHIPIDEA) += imx-usb-misc.o chipidea-imx.o
+obj-$(CONFIG_USB_IMX_CHIPIDEA) += chipidea-imx.o
+obj-$(CONFIG_USB_IMX_CHIPIDEA_USBMISC) += imx-usb-misc.o
obj-$(CONFIG_USB_IMX_PHY) += imx-usb-phy.o
diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
index 03301d9c3e..635be02929 100644
--- a/drivers/usb/imx/chipidea-imx.c
+++ b/drivers/usb/imx/chipidea-imx.c
@@ -31,6 +31,10 @@
#define MXC_EHCI_PORTSC_MASK ((0xf << 28) | (1 << 25))
+struct imx_chipidea_data {
+ bool have_usb_misc;
+};
+
struct imx_chipidea {
struct device_d *dev;
void __iomem *base;
@@ -47,13 +51,14 @@ struct imx_chipidea {
struct clk *clk;
struct ehci_host *ehci;
struct fsl_udc *udc;
+ bool have_usb_misc;
};
static int imx_chipidea_port_init(void *drvdata)
{
struct imx_chipidea *ci = drvdata;
uint32_t portsc;
- int ret;
+ int ret = 0;
if ((ci->flags & MXC_EHCI_PORTSC_MASK) == MXC_EHCI_MODE_ULPI) {
dev_dbg(ci->dev, "using ULPI phy\n");
@@ -72,9 +77,11 @@ static int imx_chipidea_port_init(void *drvdata)
return ret;
}
- ret = imx_usbmisc_port_init(ci->usbmisc, ci->portno, ci->flags);
- if (ret)
- dev_err(ci->dev, "misc init failed: %s\n", strerror(-ret));
+ if (ci->have_usb_misc) {
+ ret = imx_usbmisc_port_init(ci->usbmisc, ci->portno, ci->flags);
+ if (ret)
+ dev_err(ci->dev, "misc init failed: %s\n", strerror(-ret));
+ }
/* PFSC bit is reset by ehci_reset(), thus have to set it not in
* probe but here, after ehci_reset() is already called */
@@ -90,11 +97,13 @@ static int imx_chipidea_port_init(void *drvdata)
static int imx_chipidea_port_post_init(void *drvdata)
{
struct imx_chipidea *ci = drvdata;
- int ret;
+ int ret = 0;
- ret = imx_usbmisc_port_post_init(ci->usbmisc, ci->portno, ci->flags);
- if (ret)
- dev_err(ci->dev, "post misc init failed: %s\n", strerror(-ret));
+ if (ci->have_usb_misc) {
+ ret = imx_usbmisc_port_post_init(ci->usbmisc, ci->portno, ci->flags);
+ if (ret)
+ dev_err(ci->dev, "post misc init failed: %s\n", strerror(-ret));
+ }
return ret;
}
@@ -103,15 +112,18 @@ static int imx_chipidea_probe_dt(struct imx_chipidea *ci)
{
struct of_phandle_args out_args;
- if (of_parse_phandle_with_args(ci->dev->device_node, "fsl,usbmisc",
- "#index-cells", 0, &out_args))
- return -ENODEV;
+ if (ci->have_usb_misc) {
+ if (of_parse_phandle_with_args(ci->dev->device_node, "fsl,usbmisc",
+ "#index-cells", 0, &out_args))
+ return -ENODEV;
+
+ ci->usbmisc = of_find_device_by_node(out_args.np);
+ if (!ci->usbmisc)
+ return -ENODEV;
- ci->usbmisc = of_find_device_by_node(out_args.np);
- if (!ci->usbmisc)
- return -ENODEV;
+ ci->portno = out_args.args[0];
+ }
- ci->portno = out_args.args[0];
ci->flags = MXC_EHCI_MODE_UTMI_8BIT;
ci->mode = of_usb_get_dr_mode(ci->dev->device_node, NULL);
@@ -219,6 +231,7 @@ static int ci_set_mode(void *ctx, enum usb_dr_mode mode)
static int imx_chipidea_probe(struct device_d *dev)
{
struct resource *iores;
+ struct imx_chipidea_data *imx_data;
struct imxusb_platformdata *pdata = dev->platform_data;
int ret;
void __iomem *base;
@@ -229,6 +242,10 @@ static int imx_chipidea_probe(struct device_d *dev)
ci->dev = dev;
dev->priv = ci;
+ ret = dev_get_drvdata(dev, (const void **)&imx_data);
+ if (!ret)
+ ci->have_usb_misc = imx_data->have_usb_misc;
+
if (IS_ENABLED(CONFIG_OFDEVICE) && dev->device_node) {
ret = imx_chipidea_probe_dt(ci);
if (ret)
@@ -319,11 +336,24 @@ static void imx_chipidea_remove(struct device_d *dev)
ci_udc_unregister(ci->udc);
}
+static const struct imx_chipidea_data imx_data = {
+ .have_usb_misc = 1,
+};
+
+static const struct imx_chipidea_data imx28_data = {
+ .have_usb_misc = 0,
+};
+
static __maybe_unused struct of_device_id imx_chipidea_dt_ids[] = {
{
.compatible = "fsl,imx27-usb",
+ .data = &imx_data,
+ }, {
+ .compatible = "fsl,imx28-usb",
+ .data = &imx28_data,
}, {
.compatible = "fsl,imx7d-usb",
+ .data = &imx_data,
}, {
/* sentinel */
},
diff --git a/include/usb/chipidea-imx.h b/include/usb/chipidea-imx.h
index 5ea5fcc26d..d6939886fc 100644
--- a/include/usb/chipidea-imx.h
+++ b/include/usb/chipidea-imx.h
@@ -43,7 +43,20 @@ struct imxusb_platformdata {
enum usb_dr_mode mode;
};
+#ifdef USB_IMX_CHIPIDEA_USBMISC
int imx_usbmisc_port_init(struct device_d *dev, int port, unsigned flags);
int imx_usbmisc_port_post_init(struct device_d *dev, int port, unsigned flags);
+#else
+static inline int imx_usbmisc_port_init(struct device_d *dev, int port,
+ unsigned flags)
+{
+ return 0;
+}
+static inline int imx_usbmisc_port_post_init(struct device_d *dev, int port,
+ unsigned flags)
+{
+ return 0;
+}
+#endif
#endif /* __USB_CHIPIDEA_IMX_H */
--
2.26.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-05-06 8:17 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-06 8:17 [PATCH 01/13] net: fec_imx: Make ptp clock optional Sascha Hauer
2020-05-06 8:17 ` [PATCH 02/13] net: fec_imx: Return with an error when mandatory clock is missing Sascha Hauer
2020-05-06 8:17 ` [PATCH 03/13] clk: mxs: Do not enable enet_out clock Sascha Hauer
2020-05-06 8:17 ` [PATCH 04/13] arm: mxs: Add Kconfig option for device tree boards Sascha Hauer
2020-05-06 8:17 ` [PATCH 05/13] clk: mxs: Fix clock numbering Sascha Hauer
2020-05-06 8:17 ` [PATCH 06/13] clk imx28: Add USB clocks Sascha Hauer
2020-05-06 8:17 ` [PATCH 07/13] clk: mxs: Use device tree provided clock lookups Sascha Hauer
2020-05-06 8:17 ` [PATCH 08/13] ARM: mxs: Increase VDDD voltage to match specification Sascha Hauer
2020-05-06 8:17 ` [PATCH 09/13] filetype: Add filetype for i.MX23/28 SD card images Sascha Hauer
2020-05-06 8:17 ` [PATCH 10/13] watchdog: i.MX28: Add device tree support Sascha Hauer
2020-05-06 8:17 ` [PATCH 11/13] usb: imx-usb-phy: Add delay Sascha Hauer
2020-05-06 8:17 ` Sascha Hauer [this message]
2020-05-06 8:17 ` [PATCH 13/13] ARM: i.MX28: Update defconfig Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200506081716.20143-12-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox