From: Sascha Hauer <s.hauer@pengutronix.de>
To: Ahmad Fatoum <ahmad@a3f.at>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] stm32mp: init: fix up st, package into stm32mp pinctrl nodes
Date: Tue, 12 May 2020 09:44:03 +0200 [thread overview]
Message-ID: <20200512074402.GA5877@pengutronix.de> (raw)
In-Reply-To: <20200511074149.980042-1-ahmad@a3f.at>
On Mon, May 11, 2020 at 09:41:49AM +0200, Ahmad Fatoum wrote:
> Since Linux v5.1, the pinctrl driver can use the st,package property
> if provided to validate whether the ball to be configured exists
> on the package. The upstream device trees provide this property,
> but if we'll want barebox to supply it instead, so we can use the same
> barebox binary for different SoC variants.
>
> Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
> ---
> v1 -> v2:
> - Drop detour through nvmem cell to get package (Sascha)
> - move fixup into init.c instead of pinctrl driver
> ---
> arch/arm/mach-stm32mp/init.c | 63 +++++++++++++++++++++++++++---------
> 1 file changed, 48 insertions(+), 15 deletions(-)
Applied, thanks
Sascha
>
> diff --git a/arch/arm/mach-stm32mp/init.c b/arch/arm/mach-stm32mp/init.c
> index d687e44af1ff..7f687fa4f29a 100644
> --- a/arch/arm/mach-stm32mp/init.c
> +++ b/arch/arm/mach-stm32mp/init.c
> @@ -13,6 +13,7 @@
> #include <mach/revision.h>
> #include <mach/bootsource.h>
> #include <bootsource.h>
> +#include <dt-bindings/pinctrl/stm32-pinfunc.h>
>
> /* DBGMCU register */
> #define DBGMCU_IDC (STM32_DBGMCU_BASE + 0x00)
> @@ -221,61 +222,83 @@ static int stm32mp15_fixup_cpus(struct device_node *root, void *_ctx)
> return 0;
> }
>
> +static int fixup_pinctrl(struct device_node *root, const char *compat, u32 pkg)
> +{
> + struct device_node *np = of_find_compatible_node(root, NULL, compat);
> + if (!np)
> + return -ENODEV;
> +
> + return of_property_write_u32(np, "st,package", pkg);
> +}
> +
> +static int stm32mp15_fixup_pkg(struct device_node *root, void *_pkg)
> +{
> + unsigned long pkg = (unsigned long)_pkg;
> + int ret;
> +
> + ret = fixup_pinctrl(root, "st,stm32mp157-pinctrl", pkg);
> + if (ret)
> + return ret;
> +
> + return fixup_pinctrl(root, "st,stm32mp157-z-pinctrl", pkg);
> +}
> +
> static int setup_cpu_type(void)
> {
> const char *cputypestr, *cpupkgstr, *cpurevstr;
> - unsigned long fixupctx = 0;
> + unsigned long cpufixupctx = 0, pkgfixupctx = 0;
> u32 pkg;
> + int ret;
>
> get_cpu_type(&__stm32mp_cputype);
> switch (__stm32mp_cputype) {
> case CPU_STM32MP157Fxx:
> cputypestr = "157F";
> - fixupctx = FIXUP_CPU_MASK(2, 800);
> + cpufixupctx = FIXUP_CPU_MASK(2, 800);
> break;
> case CPU_STM32MP157Dxx:
> cputypestr = "157D";
> - fixupctx = FIXUP_CPU_MASK(2, 800);
> + cpufixupctx = FIXUP_CPU_MASK(2, 800);
> break;
> case CPU_STM32MP157Cxx:
> cputypestr = "157C";
> - fixupctx = FIXUP_CPU_MASK(2, 650);
> + cpufixupctx = FIXUP_CPU_MASK(2, 650);
> break;
> case CPU_STM32MP157Axx:
> cputypestr = "157A";
> - fixupctx = FIXUP_CPU_MASK(2, 650);
> + cpufixupctx = FIXUP_CPU_MASK(2, 650);
> break;
> case CPU_STM32MP153Fxx:
> cputypestr = "153F";
> - fixupctx = FIXUP_CPU_MASK(2, 800);
> + cpufixupctx = FIXUP_CPU_MASK(2, 800);
> break;
> case CPU_STM32MP153Dxx:
> cputypestr = "153D";
> - fixupctx = FIXUP_CPU_MASK(2, 800);
> + cpufixupctx = FIXUP_CPU_MASK(2, 800);
> break;
> case CPU_STM32MP153Cxx:
> cputypestr = "153C";
> - fixupctx = FIXUP_CPU_MASK(2, 650);
> + cpufixupctx = FIXUP_CPU_MASK(2, 650);
> break;
> case CPU_STM32MP153Axx:
> cputypestr = "153A";
> - fixupctx = FIXUP_CPU_MASK(2, 650);
> + cpufixupctx = FIXUP_CPU_MASK(2, 650);
> break;
> case CPU_STM32MP151Cxx:
> cputypestr = "151C";
> - fixupctx = FIXUP_CPU_MASK(1, 650);
> + cpufixupctx = FIXUP_CPU_MASK(1, 650);
> break;
> case CPU_STM32MP151Axx:
> cputypestr = "151A";
> - fixupctx = FIXUP_CPU_MASK(1, 650);
> + cpufixupctx = FIXUP_CPU_MASK(1, 650);
> break;
> case CPU_STM32MP151Fxx:
> cputypestr = "151F";
> - fixupctx = FIXUP_CPU_MASK(1, 800);
> + cpufixupctx = FIXUP_CPU_MASK(1, 800);
> break;
> case CPU_STM32MP151Dxx:
> cputypestr = "151D";
> - fixupctx = FIXUP_CPU_MASK(1, 800);
> + cpufixupctx = FIXUP_CPU_MASK(1, 800);
> break;
> default:
> cputypestr = "????";
> @@ -286,15 +309,19 @@ static int setup_cpu_type(void)
> switch (__stm32mp_package) {
> case PKG_AA_LBGA448:
> cpupkgstr = "AA";
> + pkgfixupctx = STM32MP_PKG_AA;
> break;
> case PKG_AB_LBGA354:
> cpupkgstr = "AB";
> + pkgfixupctx = STM32MP_PKG_AB;
> break;
> case PKG_AC_TFBGA361:
> cpupkgstr = "AC";
> + pkgfixupctx = STM32MP_PKG_AC;
> break;
> case PKG_AD_TFBGA257:
> cpupkgstr = "AD";
> + pkgfixupctx = STM32MP_PKG_AD;
> break;
> default:
> cpupkgstr = "??";
> @@ -320,8 +347,14 @@ static int setup_cpu_type(void)
> __stm32mp_cputype, pkg, __stm32mp_silicon_revision);
> pr_info("detected STM32MP%s%s Rev.%s\n", cputypestr, cpupkgstr, cpurevstr);
>
> - if (fixupctx)
> - return of_register_fixup(stm32mp15_fixup_cpus, (void*)fixupctx);
> + if (cpufixupctx) {
> + ret = of_register_fixup(stm32mp15_fixup_cpus, (void*)cpufixupctx);
> + if (ret)
> + return ret;
> + }
> +
> + if (pkgfixupctx)
> + return of_register_fixup(stm32mp15_fixup_pkg, (void*)pkgfixupctx);
>
> return 0;
> }
> --
> 2.20.1
>
>
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
>
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2020-05-12 7:44 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-05-11 7:41 Ahmad Fatoum
2020-05-12 7:44 ` Sascha Hauer [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200512074402.GA5877@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=ahmad@a3f.at \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox