From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jg1r1-0004ff-Vc for barebox@lists.infradead.org; Tue, 02 Jun 2020 08:01:01 +0000 From: Ahmad Fatoum Date: Tue, 2 Jun 2020 10:00:49 +0200 Message-Id: <20200602080049.8451-3-a.fatoum@pengutronix.de> In-Reply-To: <20200602080049.8451-1-a.fatoum@pengutronix.de> References: <20200602080049.8451-1-a.fatoum@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH 3/3] mci: reword MCI_STARTUP text To: barebox@lists.infradead.org Cc: Ahmad Fatoum With the recent addition of a generic device_detect for MCI devices, the MCI_STARTUP help text is no longer accurate. Reword it, but leave the option as-is as some boards may be broken if we drop the option (e.g. because they still depend on a probe order or call default_environment_path_set, but don't explicitly detect the device). Signed-off-by: Ahmad Fatoum --- drivers/mci/Kconfig | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/mci/Kconfig b/drivers/mci/Kconfig index 60c60ceaa527..6ae1e812528c 100644 --- a/drivers/mci/Kconfig +++ b/drivers/mci/Kconfig @@ -12,12 +12,12 @@ if MCI comment "--- Feature list ---" config MCI_STARTUP - bool "Probe on system start" + bool "Force probe on system start" help - Say 'y' here if the MCI framework should probe for attached MCI cards - on system start up. This is required if the card carries barebox's - environment (for example on systems where the MCI card is the sole - bootmedia). Otherwise probing run on demand with "mci*.probe=1" + Say 'y' here if the MCI framework should always probe for all attached + MCI cards on system start up. This may required for some legacy boards. + When this is 'n', probing happens on demand either with "mci*.probe=1" + or with driver/board code calling device_detect. config MCI_INFO bool "MCI Info" -- 2.27.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox