mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Oleksij Rempel <o.rempel@pengutronix.de>,
	David Jander <david@protonic.nl>,
	Oleksij Rempel <linux@rempel-privat.de>
Subject: [PATCH v2 1/2] ARM: dts: imx6: add Protonic boards
Date: Tue, 16 Jun 2020 07:52:01 +0200	[thread overview]
Message-ID: <20200616055202.9308-2-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20200616055202.9308-1-o.rempel@pengutronix.de>

From: Oleksij Rempel <linux@rempel-privat.de>

This DTS will be replaced by kernel version

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/dts/imx6dl-alti6p.dts   | 118 ++++++
 arch/arm/dts/imx6dl-lanmcu.dts   | 434 ++++++++++++++++++++
 arch/arm/dts/imx6dl-plybas.dts   | 186 +++++++++
 arch/arm/dts/imx6dl-plym2m.dts   | 132 ++++++
 arch/arm/dts/imx6dl-prtmvt.dts   | 164 ++++++++
 arch/arm/dts/imx6dl-prtrvt.dts   | 182 +++++++++
 arch/arm/dts/imx6dl-prtvt7.dts   | 472 +++++++++++++++++++++
 arch/arm/dts/imx6dl-victgo.dts   | 145 +++++++
 arch/arm/dts/imx6dl-vicut1.dts   |  51 +++
 arch/arm/dts/imx6q-prti6q.dts    | 554 +++++++++++++++++++++++++
 arch/arm/dts/imx6q-prtwd2.dts    | 188 +++++++++
 arch/arm/dts/imx6q-vicut1.dts    |  52 +++
 arch/arm/dts/imx6qdl-prti6q.dtsi | 174 ++++++++
 arch/arm/dts/imx6qdl-vicut1.dtsi | 208 ++++++++++
 arch/arm/dts/imx6qp-prtwd3.dts   | 675 +++++++++++++++++++++++++++++++
 arch/arm/dts/imx6qp-vicutp.dts   |  52 +++
 arch/arm/dts/imx6ul-prti6g.dts   |  81 ++++
 arch/arm/dts/imx6ul-prti6g.dtsi  | 330 +++++++++++++++
 18 files changed, 4198 insertions(+)
 create mode 100644 arch/arm/dts/imx6dl-alti6p.dts
 create mode 100644 arch/arm/dts/imx6dl-lanmcu.dts
 create mode 100644 arch/arm/dts/imx6dl-plybas.dts
 create mode 100644 arch/arm/dts/imx6dl-plym2m.dts
 create mode 100644 arch/arm/dts/imx6dl-prtmvt.dts
 create mode 100644 arch/arm/dts/imx6dl-prtrvt.dts
 create mode 100644 arch/arm/dts/imx6dl-prtvt7.dts
 create mode 100644 arch/arm/dts/imx6dl-victgo.dts
 create mode 100644 arch/arm/dts/imx6dl-vicut1.dts
 create mode 100644 arch/arm/dts/imx6q-prti6q.dts
 create mode 100644 arch/arm/dts/imx6q-prtwd2.dts
 create mode 100644 arch/arm/dts/imx6q-vicut1.dts
 create mode 100644 arch/arm/dts/imx6qdl-prti6q.dtsi
 create mode 100644 arch/arm/dts/imx6qdl-vicut1.dtsi
 create mode 100644 arch/arm/dts/imx6qp-prtwd3.dts
 create mode 100644 arch/arm/dts/imx6qp-vicutp.dts
 create mode 100644 arch/arm/dts/imx6ul-prti6g.dts
 create mode 100644 arch/arm/dts/imx6ul-prti6g.dtsi

diff --git a/arch/arm/dts/imx6dl-alti6p.dts b/arch/arm/dts/imx6dl-alti6p.dts
new file mode 100644
index 0000000000..8d53100bea
--- /dev/null
+++ b/arch/arm/dts/imx6dl-alti6p.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+
+/ {
+	model = "Altesco I6P Board";
+	compatible = "alt,alti6p", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x40000000>;
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c1>;
+	status = "okay";
+};
+
+/* DDC */
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <50000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <50000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c4>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC		0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22		0x1b0b0
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T configure DDC pins for HDMI! */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL		0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_CS3__I2C4_SDA		0x4001f8b1
+			MX6QDL_PAD_NANDF_WP_B__I2C4_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK   0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22   0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23   0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts
new file mode 100644
index 0000000000..b05ed9c3ba
--- /dev/null
+++ b/arch/arm/dts/imx6dl-lanmcu.dts
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	model = "LANMCU";
+	compatible = "lan,lanmcu", "fsl,imx6dl";
+
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	memory {
+		reg = <0x10000000 0x10000000>;
+	};
+
+	reg_usb_otg_vbus: otg-vbus-regulator {
+		compatible = "regulator-fixed";
+		regulator-name = "regulator-OTG-VBUS";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 0>;
+		enable-active-high;
+	};
+
+	usdhc2_pwrseq: usdhc2_pwrseq {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wlan_npd>;
+		compatible = "mmc-pwrseq-simple";
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	display: display0 {
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		compatible = "fsl,imx-parallel-display";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "bgr666";
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	panel {
+		compatible = "edt,etm0700g0bdh6";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 5 7 9 12 15 20 27 35 47 62 81 107 142 188 248
+			     328 433 573 757 1000>;
+		default-brightness-level = <20>;
+		status = "okay";
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		debug0 {
+			label = "debug0";
+			gpios = <&gpio1 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	prti6q {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* HW revision detect */
+				MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+				MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+				MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+				MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+				MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
+			>;
+		};
+
+		pinctrl_usbotg: usbotggrp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D21__USB_OTG_OC  0x1b0b0
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x1b0b0
+			>;
+		};
+
+		pinctrl_ipu1_disp: ipudisp1grp {
+			fsl,pins = <
+				/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+				MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30
+				MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02        0x30
+				MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03        0x30
+				MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15       0x30
+				MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00   0x30
+				MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01   0x30
+				MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02   0x30
+				MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03   0x30
+				MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04   0x30
+				MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05   0x30
+				MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06   0x30
+				MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07   0x30
+				MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08   0x30
+				MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09   0x30
+				MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10  0x30
+				MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11  0x30
+				MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12  0x30
+				MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13  0x30
+				MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14  0x30
+				MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15  0x30
+				MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16  0x30
+				MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17  0x30
+			>;
+		};
+
+		pinctrl_enet: enetgrp {
+			fsl,pins = <
+				/* MX6QDL_ENET_PINGRP4 */
+				MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+				MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+				MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
+				MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
+				MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
+				MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
+				MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
+				MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
+				MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
+
+				MX6QDL_PAD_GPIO_16__ENET_REF_CLK        0x1b0b0
+				/* Phy reset */
+				MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22        0x1b0b0
+				/* nINTRP */
+				MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23        0x1b0b0
+			>;
+		};
+
+		pinctrl_pwm1: pwm1grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_9__PWM1_OUT             0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_8__GPIO1_IO08           0x1b0b0
+			>;
+		};
+
+		pinctrl_wlan_npd: wlan_npd {
+			fsl,pins = <
+				/* WL_REG_ON */
+				MX6QDL_PAD_NANDF_RB0__GPIO6_IO10        0x13069
+			>;
+		};
+
+		pinctrl_uart2: uart2grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x130b1
+			>;
+		};
+
+		pinctrl_uart3: uart3grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+				MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x130b1
+			>;
+		};
+
+		pinctrl_uart4: uart4grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL0__UART4_TX_DATA      0x1b0b1
+				MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA      0x1b0b1
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6QDL_PAD_CSI0_DAT8__I2C1_SDA	0x4001f8b1
+				MX6QDL_PAD_CSI0_DAT9__I2C1_SCL	0x4001f8b1
+			>;
+		};
+
+		pinctrl_i2c3: i2c3grp {
+			fsl,pins = <
+				MX6QDL_PAD_GPIO_5__I2C3_SCL             0x4001b8b1
+				MX6QDL_PAD_GPIO_6__I2C3_SDA             0x4001b8b1
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+				MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+				MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+				MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+				MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+				MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+				MX6QDL_PAD_GPIO_1__SD1_CD_B		0x1b0b0
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+				MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+				MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+				MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+				MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+				MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+			>;
+		};
+
+		pinctrl_usdhc3: usdhc3grp {
+			fsl,pins = <
+				MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
+				MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
+				MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
+				MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
+				MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
+				MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
+				MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
+				MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
+				MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
+				MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
+			>;
+		};
+
+		pinctrl_can1: can1grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
+				MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+			>;
+		};
+
+		pinctrl_can2: can2grp {
+			fsl,pins = <
+				MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX	0x80000000
+				MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX	0x80000000
+			>;
+		};
+
+		pinctrl_ts_edt: ts1grp {
+			fsl,pins = <
+				MX6QDL_PAD_EIM_D20__GPIO3_IO20          0x1b0b0
+			>;
+		};
+	};
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	linux,rs485-enabled-at-boot-time;
+	rts-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	touchscreen: edt_ft5406@38 {
+		compatible = "edt,edt-ft5406";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ts_edt>;
+		reg = <0x38>;
+		interrupt-parent = <&gpio3>;
+		interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+		touchscreen-size-x = <1792>;
+		touchscreen-size-y = <1024>;
+
+		touchscreen-fuzz-x = <0>;
+		touchscreen-fuzz-y = <0>;
+
+		/* Touch screen calibration */
+		threshold = <50>;
+		gain = <5>;
+		offset = <10>;
+	};
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_pwrseq>;
+	pm-ignore-notify;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+
+	partitions {
+		/*
+		 * Map a partition at the last 64k of the area available for
+		 * the second stage bootloader.
+		 */
+		compatible = "fixed-partitions";
+		#size-cells = <1>;
+		#address-cells = <1>;
+
+		bootstate_backend: bootstate_backend@f0000 {
+			reg = <0xf0000 0x10000>;
+			label = "bootstate";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
diff --git a/arch/arm/dts/imx6dl-plybas.dts b/arch/arm/dts/imx6dl-plybas.dts
new file mode 100644
index 0000000000..de0ba05e13
--- /dev/null
+++ b/arch/arm/dts/imx6dl-plybas.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Plymovent BAS board";
+	compatible = "ply,plybas", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x10000000>;
+	};
+
+	backlight_lcd {
+		status = "disabled";
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@20 {
+			label = "START";
+			linux,code = <31>;
+			gpios = <&gpio5 8 1>;
+		};
+		button@21 {
+			label = "CLEAN";
+			linux,code = <46>;
+			gpios = <&gpio5 9 1>;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		debug0 {
+			label = "debug0";
+			gpios = <&gpio1 8 0>;
+		};
+
+		debug1 {
+			label = "debug1";
+			gpios = <&gpio1 9 0>;
+		};
+
+		light_tower1 {
+			label = "light_tower1";
+			gpios = <&gpio4 22 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		light_tower2 {
+			label = "light_tower2";
+			gpios = <&gpio4 23 0>;
+		};
+
+		light_tower3 {
+			label = "light_tower3";
+			gpios = <&gpio4 24 0>;
+		};
+
+		light_tower4 {
+			label = "light_tower4";
+			gpios = <&gpio4 25 0>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	fsl,uart-has-rtscts;
+	linux,rs485-enabled-at-boot-time;
+	rs485-rts-delay = <0 20>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CAN1_SR + CAN2_SR GPIO outputs */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13	0x13070
+
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23	0x1b0b0 /* YACO_nIRQ */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30	0x130b0 /* YACO_BOOT0 */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31	0x1b0b0 /* YACO_nRESET */
+
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21	0x13070 /* BUZZER */
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27	0x13070 /* ANA_OUT_SD */
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0 /* ANA_OUT_ERR */
+
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x13070 /* RELAY1 */
+			MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06	0x13070 /* RELAY2 */
+
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x1b0b0 /* IN1 */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x1b0b0 /* IN2 */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1b0b0 /* IN3 */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x1b0b0 /* IN4 */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x1b0b0 /* IN5 */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x1b0b0 /* IN6 */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x1b0b0 /* IN7 */
+			MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15	0x1b0b0 /* IN8 */
+			MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16	0x1b0b0 /* IN9 */
+			MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17	0x1b0b0 /* IN10 */
+			MX6QDL_PAD_DI0_PIN4__GPIO4_IO20	0x1b0b0 /* IN11 */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18	0x1b0b0 /* IN12 */
+
+			MX6QDL_PAD_DI0_PIN3__GPIO4_IO19	0x1a0b0 /* HMI */
+
+			/* HW revision detect */
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0 /* DEBUG0 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09	0x1b0b0 /* DEBUG1 */
+
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22	0x13070 /* LED1 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23	0x13070 /* LED2 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x13070 /* LED3 (lighttower) */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x13070 /* LED4 (lighttower) */
+		>;
+	};
+
+	/* RS485 UART */
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x130b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK   0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-plym2m.dts b/arch/arm/dts/imx6dl-plym2m.dts
new file mode 100644
index 0000000000..b66321fb46
--- /dev/null
+++ b/arch/arm/dts/imx6dl-plym2m.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+
+/ {
+	model = "Plymovent M2M board";
+	compatible = "ply,plym2m", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x10000000>;
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		debug0 {
+			label = "debug0";
+			gpios = <&gpio1 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* CAN1_SR GPIO output */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0 /* CAN1_TERM */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30	0x1b0b0 /* TSC_BUSY */
+
+			/* HW revision detect */
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			/* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK	0x30
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15		0x30
+			MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02		0x30
+			MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03		0x30
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00	0x30
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01	0x30
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02	0x30
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03	0x30
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04	0x30
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05	0x30
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06	0x30
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07	0x30
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08	0x30
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09	0x30
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10	0x30
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11	0x30
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12	0x30
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13	0x30
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14	0x30
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15	0x30
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16	0x30
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17	0x30
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK   0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22   0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23   0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT	0x1b0b0
+		>;
+	};
+
+	pinctrl_backlight_m2m: backlightm2mgrp {
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-prtmvt.dts b/arch/arm/dts/imx6dl-prtmvt.dts
new file mode 100644
index 0000000000..05fce7178f
--- /dev/null
+++ b/arch/arm/dts/imx6dl-prtmvt.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Protonic MVT board";
+	compatible = "prt,prtmvt", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	gpio_keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+
+		button@20 {
+			label = "GPIO Key F1";
+			linux,code = <59>;
+			gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+		};
+		button@21 {
+			label = "GPIO Key F2";
+			linux,code = <60>;
+			gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+		};
+		button@22 {
+			label = "GPIO Key F3";
+			linux,code = <61>;
+			gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+		};
+		button@23 {
+			label = "GPIO Key F4";
+			linux,code = <62>;
+			gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+		};
+		button@24 {
+			label = "GPIO Key F5";
+			linux,code = <63>;
+			gpios = <&pca_gpio 4 GPIO_ACTIVE_LOW>;
+		};
+
+		// Center
+		button@25 {
+			label = "GPIO Key CYCLE";
+			linux,code = <154>;
+			gpios = <&pca_gpio 5 GPIO_ACTIVE_LOW>;
+		};
+		button@26 {
+			label = "GPIO Key ESC";
+			linux,code = <1>;
+			gpios = <&pca_gpio 6 GPIO_ACTIVE_LOW>;
+		};
+		button@27 {
+			label = "GPIO Key UP";
+			linux,code = <103>;
+			gpios = <&pca_gpio 7 GPIO_ACTIVE_LOW>;
+		};
+		button@28 {
+			label = "GPIO Key DOWN";
+			linux,code = <108>;
+			gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+		};
+		button@29 {
+			label = "GPIO Key OK";
+			linux,code = <0x160>;
+			gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+		};
+
+		button@2a {
+			label = "GPIO Key F6";
+			linux,code = <64>;
+			gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+		};
+		button@2b {
+			label = "GPIO Key F7";
+			linux,code = <65>;
+			gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+		};
+		button@2c {
+			label = "GPIO Key F8";
+			linux,code = <66>;
+			gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+		};
+		button@2d {
+			label = "GPIO Key F9";
+			linux,code = <67>;
+			gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+		};
+		button@2e {
+			label = "GPIO Key F10";
+			linux,code = <68>;
+			gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&pwm2 {
+	status = "disabled";
+};
+
+&pcie {
+	status = "disabled";
+};
+
+&i2c1 {
+	pca_gpio: gpio@74 {
+		#gpio-cells = <2>;
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_pca9539>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+	};
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK   0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30	0x1b0b0
+		>;
+	};
+
+	pinctrl_pca9539: pca9539 {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-prtrvt.dts b/arch/arm/dts/imx6dl-prtrvt.dts
new file mode 100644
index 0000000000..802bd50ae6
--- /dev/null
+++ b/arch/arm/dts/imx6dl-prtrvt.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic RVT board";
+	compatible = "prt,prtrvt", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x10000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_nfc>;
+		spi-max-frequency = <2000000>;
+		interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
+		ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
+				  <&gpio5 11 GPIO_ACTIVE_LOW>;
+		vin-supply = <&reg_3v3>;
+		vin-voltage-override = <3100000>;
+		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
+		t5t-rmb-extra-byte-quirk;
+		status = "okay";
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* nc */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_nfc: nfcgrp {
+		fsl,pins = <
+			/* NFC_ASK_OOK */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x100b1
+			/* NFC_PWR_EN */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x100b1
+			/* NFC_EN2 */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x100b1
+			/* NFC_EN */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			/* NFC_MOD */
+			MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13	0x100b1
+			/* NFC_IRQ */
+			MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14	0x100b1
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-prtvt7.dts b/arch/arm/dts/imx6dl-prtvt7.dts
new file mode 100644
index 0000000000..c202e6786d
--- /dev/null
+++ b/arch/arm/dts/imx6dl-prtvt7.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic VT7";
+	compatible = "prt,prtvt7", "fsl,imx6dl";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 500000>;
+		brightness-levels = <0 20 81 248 1000>;
+		default-brightness-level = <20>;
+		num-interpolated-steps = <21>;
+		power-supply = <&reg_12v_bl>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	display {
+		compatible = "fsl,imx-parallel-display";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_ipu1_disp>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		interface-pix-fmt = "rgb24";
+		status = "okay";
+
+		port@0 {
+			reg = <0>;
+
+			display_in: endpoint {
+				remote-endpoint = <&ipu1_di0_disp0>;
+			};
+		};
+
+		port@1 {
+			reg = <1>;
+
+			display_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+
+	keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		esc {
+			label = "GPIO Key ESC";
+			linux,code = <KEY_ESC>;
+			gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+		};
+
+		up {
+			label = "GPIO Key UP";
+			linux,code = <KEY_UP>;
+			gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+		};
+
+		down {
+			label = "GPIO Key DOWN";
+			linux,code = <KEY_DOWN>;
+			gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+		};
+
+		enter {
+			label = "GPIO Key Enter";
+			linux,code = <KEY_ENTER>;
+			gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+		};
+
+		cycle {
+			label = "GPIO Key CYCLE";
+			linux,code = <KEY_CYCLEWINDOWS>;
+			gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+		};
+
+		f1 {
+			label = "GPIO Key F1";
+			linux,code = <KEY_F1>;
+			gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+		};
+
+		f2 {
+			label = "GPIO Key F2";
+			linux,code = <KEY_F2>;
+			gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+		};
+
+		f3 {
+			label = "GPIO Key F3";
+			linux,code = <KEY_F3>;
+			gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+		};
+
+		f4 {
+			label = "GPIO Key F4";
+			linux,code = <KEY_F4>;
+			gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+		};
+
+		f5 {
+			label = "GPIO Key F5";
+			linux,code = <KEY_F5>;
+			gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+		};
+
+		f6 {
+			label = "GPIO Key F6";
+			linux,code = <KEY_F6>;
+			gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+		};
+
+		f7 {
+			label = "GPIO Key F7";
+			linux,code = <KEY_F7>;
+			gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+		};
+
+		f8 {
+			label = "GPIO Key F8";
+			linux,code = <KEY_F8>;
+			gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+		};
+
+		f9 {
+			label = "GPIO Key F9";
+			linux,code = <KEY_F9>;
+			gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+		};
+
+		f10 {
+			label = "GPIO Key F10";
+			linux,code = <KEY_F10>;
+			gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+
+	panel {
+		compatible = "innolux,g070y2t0ec";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&display_out>;
+			};
+		};
+	};
+
+	reg_12v_bl: regulator-bl-12v {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_reg_12v_bl>;
+		regulator-name = "12v-bl";
+		regulator-min-microvolt = <12000000>;
+		regulator-max-microvolt = <12000000>;
+		gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+
+	tsc@0 {
+		compatible = "ti,tsc2046";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tsc>;
+		spi-max-frequency = <100000>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+		pendown-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+		vcc-supply = <&reg_3v3>;
+
+		ti,vref-delay-usecs = /bits/ 16 <100>;
+
+		ti,x-min = /bits/ 16 <0>;
+		ti,x-max = /bits/ 16 <8000>;
+		ti,y-min = /bits/ 16 <0>;
+		ti,y-max = /bits/ 16 <4800>;
+		ti,x-plate-ohms = /bits/ 16 <800>;
+		ti,y-plate-ohms = /bits/ 16 <300>;
+		ti,pressure-max = /bits/ 16 <4095>;
+
+		ti,skip-samples = <2>;
+		ti,sample-period-msecs = <10>;
+		ti,report-period-msecs = <30>;
+
+		ti,filter-tolerance = <80>;
+		ti,touch-resistance-threshold = <3500>;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux_ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux_pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&i2c1 {
+	sgtl5000: codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_codec>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+&i2c3 {
+	rtc@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	gpio_pca: gpio@74 {
+		compatible = "nxp,pca9539";
+		reg = <0x74>;
+		interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+		#gpio-cells = <2>;
+		gpio-controller;
+	};
+};
+
+&ipu1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ipu1_csi0>;
+	status = "okay";
+};
+
+&ipu1_di0_disp0 {
+	remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&snvs_pwrkey {
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "i2s-slave";
+	status = "okay";
+};
+
+&usbh1 {
+	status = "disabled";
+};
+
+&vpu {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+		>;
+	};
+
+	pinctrl_codec: codecgrp {
+		fsl,pins = <
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ipu1_csi0: ipu1csi0grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18	0x1b0b0
+			MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19	0x1b0b0
+			MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+		>;
+	};
+
+	pinctrl_ipu1_disp: ipudisp1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+			MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15	   0xb0
+
+			MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+			MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+			MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+			MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+			MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+			MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+			MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+			MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+			MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+			MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+			MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+			MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+			MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+			MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+			MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+			MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+			MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+			MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+			MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+			MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+			MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+			MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+			MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+			MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_9__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_reg_12v_bl: 12blgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_7__GPIO1_IO07		0x1b0b0
+		>;
+	};
+
+	pinctrl_tsc: tscgrp {
+
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b0
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-victgo.dts b/arch/arm/dts/imx6dl-victgo.dts
new file mode 100644
index 0000000000..55bc4c8d41
--- /dev/null
+++ b/arch/arm/dts/imx6dl-victgo.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	model = "Kverneland Tellus GO";
+	compatible = "kvg,victgo", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x20000000>;
+	};
+
+	rotary-encoder {
+		compatible = "rotary-encoder";
+		pinctrl-0 = <&pinctrl_rotary_ch>;
+		gpios = <&gpio2 3 0>, <&gpio2 4 0>;
+		linux,axis = <8>; /* REL_WHEEL */
+		rotary-encoder,steps-per-period = <4>;
+		rotary-encoder,relative-axis;
+		rotary-encoder,rollover;
+		wakeup-source;
+	};
+
+	rotary-button {
+		compatible = "gpio-keys";
+		pinctrl-0 = <&pinctrl_rotary_btn>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		button@0 {
+			label = "Rotary Key";
+			gpios = <&gpio2 05 1>;
+			linux,code = <KEY_ENTER>;
+			gpio-key,wakeup;
+		};
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+};
+
+&uart2 {
+	status = "disabled";
+};
+
+&i2c1 {
+	ht16k33: ht16k33@70 {
+		compatible = "holtek,ht16k33";
+		pinctrl-0 = <&pinctrl_ht16k33>;
+		reg = <0x70>;
+		refresh-rate-hz = <20>;
+		debounce-delay-ms = <50>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+		keypad,num-rows = <12>;
+		keypad,num-columns = <3>;
+		linux,keymap = <
+			MATRIX_KEY(2, 0, KEY_F6)
+			MATRIX_KEY(3, 0, KEY_F8)
+			MATRIX_KEY(4, 0, KEY_F10)
+			MATRIX_KEY(5, 0, KEY_F4)
+			MATRIX_KEY(6, 0, KEY_F2)
+			MATRIX_KEY(2, 1, KEY_F5)
+			MATRIX_KEY(3, 1, KEY_F7)
+			MATRIX_KEY(4, 1, KEY_F9)
+			MATRIX_KEY(5, 1, KEY_F3)
+			MATRIX_KEY(6, 1, KEY_F1)
+			>;
+	};
+};
+
+&pwm2 {
+	status = "disabled";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x1b0b0
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x1b0b0
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER       0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN       0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0     0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1     0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN      0x1b0b0
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK   	0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26   	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30   	0x1b0b0
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+			MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK	0x100b1
+		>;
+	};
+
+	pinctrl_rotary_ch: rotarygrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D3__GPIO2_IO03	0x1b0b0 /* ROTARY_A */
+			MX6QDL_PAD_NANDF_D4__GPIO2_IO04	0x1b0b0	/* ROTARY_B */
+		>;
+	};
+
+	pinctrl_rotary_btn: rotarygrp {
+		fsl,pins = <
+			MX6QDL_PAD_NANDF_D5__GPIO2_IO05	0x1b0b0	/* ROTARY_BTN */
+		>;
+	};
+
+	pinctrl_ht16k33: ht16k33grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_19__GPIO4_IO05	0x1b0b0 /* IRQ */
+		>;
+	};
+
+	pinctrl_tsc2046e: tsc2046egrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08      0x1b0b0
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09      0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6dl-vicut1.dts b/arch/arm/dts/imx6dl-vicut1.dts
new file mode 100644
index 0000000000..725acbefc5
--- /dev/null
+++ b/arch/arm/dts/imx6dl-vicut1.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Kverneland UT1 Board";
+	compatible = "kvg,vicut1", "fsl,imx6dl";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6q-prti6q.dts b/arch/arm/dts/imx6q-prti6q.dts
new file mode 100644
index 0000000000..f0469d5f62
--- /dev/null
+++ b/arch/arm/dts/imx6q-prti6q.dts
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6q.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+	model = "Protonic PRTI6Q board";
+	compatible = "prt,prti6q", "fsl,imx6q";
+
+	chosen {
+		environment {
+			compatible = "barebox,environment";
+			device-path = &ecspi1, "partname:env";
+		};
+	};
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0xf0000000>;
+	};
+
+	backlight_lcd: backlight-lcd {
+		compatible = "pwm-backlight";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_backlight>;
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 16 64 255>;
+		num-interpolated-steps = <16>;
+		default-brightness-level = <16>;
+		power-supply = <&reg_3v3>;
+		enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+	};
+
+	can3_25m_osc: can3-25m-osc {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		led-debug0 {
+			function = LED_FUNCTION_STATUS;
+			gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		led-debug1 {
+			function = LED_FUNCTION_SD;
+			gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "disk-activity";
+		};
+	};
+
+	panel {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			panel_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+	};
+
+	reg_wifi: regulator-wifi {
+		compatible = "regulator-fixed";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		enable-active-high;
+		gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+		regulator-max-microvolt = <1800000>;
+		regulator-min-microvolt = <1800000>;
+		regulator-name = "regulator-WL12xx";
+		startup-delay-us = <70000>;
+	};
+
+	sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,name = "prti6q-sgtl5000";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,widgets =
+			"Microphone", "Microphone Jack",
+			"Line", "Line In Jack",
+			"Headphone", "Headphone Jack",
+			"Speaker", "External Speaker";
+		simple-audio-card,routing =
+			"MIC_IN", "Microphone Jack",
+			"LINE_IN", "Line In Jack",
+			"Headphone Jack", "HP_OUT",
+			"External Speaker", "LINE_OUT";
+
+		simple-audio-card,cpu {
+			sound-dai = <&ssi1>;
+			system-clock-frequency = <0>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&sgtl5000>;
+			bitclock-master;
+			frame-master;
+		};
+	};
+
+	sound-spdif {
+		compatible = "fsl,imx-audio-spdif";
+		model = "imx-spdif";
+		spdif-controller = <&spdif>;
+		spdif-in;
+		spdif-out;
+	};
+};
+
+&audmux {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_audmux>;
+	status = "okay";
+
+	mux_ssi1 {
+		fsl,audmux-port = <0>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN		0
+			IMX_AUDMUX_V2_PTCR_TFSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TCSEL(2)	0
+			IMX_AUDMUX_V2_PTCR_TFSDIR	0
+			IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+		>;
+	};
+
+	mux_pins3 {
+		fsl,audmux-port = <2>;
+		fsl,port-config = <
+			IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+			0		       IMX_AUDMUX_V2_PDCR_TXRXEN
+		>;
+	};
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can2>;
+	status = "okay";
+};
+
+&ecspi1 {
+	cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <20000000>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x100000>;
+		};
+
+		partition@100000 {
+			label = "env";
+			reg = <0x100000 0x10000>;
+		};
+
+		partition@110000 {
+			label = "spare";
+			reg = <0x110000 0x2f0000>;
+		};
+	};
+};
+
+&ecspi2 {
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+	status = "okay";
+
+	can@0 {
+		compatible = "microchip,mcp2515";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_can3>;
+		clocks = <&can3_25m_osc>;
+		interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+		spi-max-frequency = <5000000>;
+	};
+
+	adc@1 {
+		compatible = "ti,adc128s052";
+		reg = <1>;
+		spi-max-frequency = <2000000>;
+		vref-supply = <&reg_3v3>;
+	};
+};
+
+&ecspi3 {
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii-id";
+	phy-handle = <&rgmii_phy>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ9031RNX PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
+};
+
+&hdmi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hdmi>;
+	ddc-i2c-bus = <&i2c2>;
+	status = "okay";
+};
+
+&i2c1 {
+	sgtl5000: audio-codec@a {
+		compatible = "fsl,sgtl5000";
+		reg = <0xa>;
+		#sound-dai-cells = <0>;
+		clocks = <&clks 201>;
+		VDDA-supply = <&reg_3v3>;
+		VDDIO-supply = <&reg_3v3>;
+		VDDD-supply = <&reg_1v8>;
+	};
+};
+
+/* DDC */
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* can2_l */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can2_h */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_l */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		/* can1_h */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&pcie {
+	status = "okay";
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&panel_in>;
+			};
+		};
+	};
+};
+
+&sata {
+	status = "okay";
+};
+
+&snvs_poweroff {
+	status = "okay";
+};
+
+&spdif {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_spdif>;
+	status = "okay";
+};
+
+&ssi1 {
+	#sound-dai-cells = <0>;
+	fsl,mode = "ac97-slave";
+	status = "okay";
+};
+
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart2>;
+	status = "okay";
+};
+
+&uart5 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart5>;
+	status = "okay";
+};
+
+&usbotg {
+	pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	vmmc-supply = <&reg_wifi>;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	status = "okay";
+
+	wifi {
+		compatible = "ti,wl1271";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi>;
+		interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+		ref-clock-frequency = "38400000";
+		tcxo-clock-frequency = "19200000";
+	};
+};
+
+&iomuxc {
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			MX6QDL_PAD_CSI0_DAT7__AUD3_RXD		0x130b0
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_backlight: backlightgrp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28	0x1b0b0
+		>;
+	};
+
+	pinctrl_can2: can2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
+			MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
+		>;
+	};
+
+	pinctrl_can3: can3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20		0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi1: ecspi1grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D17__ECSPI1_MISO		0x100b1
+			MX6QDL_PAD_EIM_D18__ECSPI1_MOSI		0x100b1
+			MX6QDL_PAD_EIM_D16__ECSPI1_SCLK		0x100b1
+			/* CS */
+			MX6QDL_PAD_EIM_D19__GPIO3_IO19		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+	pinctrl_ecspi2_cs: ecspi2csgrp {
+		fsl,pins = <
+			/* ADC128S022 CS */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+		>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL	0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL	0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK	0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+
+	pinctrl_hdmi: hdmigrp {
+		fsl,pins = <
+			/* NOTE: DDC is done via I2C2, so DON'T
+			 * configure DDC pins for HDMI!
+			 */
+			MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE	0x1f8b0
+		>;
+	};
+
+	/* DDC */
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL3__I2C2_SCL	0x4001b8b1
+			MX6QDL_PAD_KEY_ROW3__I2C2_SDA	0x4001b8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_spdif: spdifgrp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_16__SPDIF_IN		0x1b0b0
+			MX6QDL_PAD_GPIO_19__SPDIF_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_uart2: uart2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B	0x1b0b1
+			MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B	0x1b0b1
+		>;
+	};
+
+	pinctrl_uart5: uart5grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL1__UART5_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg_id: usbotgidgrp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID	0x1f058
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi: wifigrp {
+		fsl,pins = <
+			/* WL12xx IRQ */
+			MX6QDL_PAD_ENET_TXD0__GPIO1_IO30	0x10880
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_RXD1__GPIO1_IO26	0x1b8b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6q-prtwd2.dts b/arch/arm/dts/imx6q-prtwd2.dts
new file mode 100644
index 0000000000..8572917865
--- /dev/null
+++ b/arch/arm/dts/imx6q-prtwd2.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2018 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6q.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+	model = "Protonic WD2 board";
+	compatible = "prt,prtwd2", "fsl,imx6q";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	/* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
+	i2c@4 {
+		compatible = "i2c-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_i2c4>;
+		sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+		scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+		i2c-gpio,delay-us = <20>;	/* ~10 kHz */
+		i2c-gpio,scl-output-only;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+};
+
+&can1 {
+	pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rmii";
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>;
+	clock-names = "ipg", "ahb";
+	status = "okay";
+
+	fixed-link {
+		speed = <100>;
+		pause;
+		full-duplex;
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* V in */
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* I charge */
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* V bus  */
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		/* nc */
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	no-1-8-v;
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	pm-ignore-notify;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	wifi@1 {
+		compatible = "brcm,bcm4329-fmac";
+		reg = <1>;
+	};
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_eth_chg>;
+
+	pinctrl_can1phy: can1phy {
+		fsl,pins = <
+			/* CAN1_SR */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12	0x13070
+		>;
+	};
+
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP4 */
+			MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER	0x130b0
+			MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN	0x1b0b0
+			MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0	0x1b0b0
+			MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1	0x1b0b0
+			MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN	0x1b0b0
+
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x1b0b0
+			/* Phy reset */
+			MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22	0x1b0b0
+			/* nINTRP */
+			MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23	0x1b0b0
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+		>;
+	};
+
+	pinctrl_i2c4: i2c4grp {
+		fsl,pins = <
+			MX6QDL_PAD_ENET_MDIO__GPIO1_IO22	0x1f8b0
+			MX6QDL_PAD_ENET_MDC__GPIO1_IO31		0x1f8b0
+		>;
+	};
+
+	pinctrl_usb_eth_chg: usbethchggrp {
+		fsl,pins = <
+			/* USB charging control */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
+			>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6q-vicut1.dts b/arch/arm/dts/imx6q-vicut1.dts
new file mode 100644
index 0000000000..9f60ed1ac2
--- /dev/null
+++ b/arch/arm/dts/imx6q-vicut1.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6q.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Kverneland UT1Q Board";
+	compatible = "kvg,vicut1q", "fsl,imx6q";
+
+	memory {
+		reg = <0x10000000 0xf0000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/* phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6qdl-prti6q.dtsi b/arch/arm/dts/imx6qdl-prti6q.dtsi
new file mode 100644
index 0000000000..ed526d185f
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-prti6q.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+	chosen {
+		stdout-path = &uart4;
+	};
+
+	reg_1v8: regulator-1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "1v8";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	reg_3v3: regulator-3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "3v3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+
+	reg_usb_h1_vbus: regulator-h1-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "h1-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-always-on;
+	};
+
+	reg_usb_otg_vbus: regulator-otg-vbus {
+		compatible = "regulator-fixed";
+		regulator-name = "otg-vbus";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+};
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_can1>;
+	status = "okay";
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+};
+
+&i2c3 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c3>;
+	status = "okay";
+
+	temperature-sensor@70 {
+		compatible = "ti,tmp103";
+		reg = <0x70>;
+	};
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart4>;
+	status = "okay";
+};
+
+&usbh1 {
+	vbus-supply = <&reg_usb_h1_vbus>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	status = "okay";
+};
+
+&usbotg {
+	vbus-supply = <&reg_usb_otg_vbus>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usbotg>;
+	phy_type = "utmi";
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+	status = "okay";
+};
+
+&usdhc3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc3>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_can1: can1grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX	0x80000000
+			MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX	0x80000000
+		>;
+	};
+
+	pinctrl_i2c1: i2c1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT8__I2C1_SDA		0x4001f8b1
+			MX6QDL_PAD_CSI0_DAT9__I2C1_SCL		0x4001f8b1
+		>;
+	};
+
+	pinctrl_i2c3: i2c3grp {
+		fsl,pins = <
+			MX6QDL_PAD_GPIO_5__I2C3_SCL		0x4001b8b1
+			MX6QDL_PAD_GPIO_6__I2C3_SDA		0x4001b8b1
+		>;
+	};
+
+	pinctrl_uart4: uart4grp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_COL0__UART4_TX_DATA	0x1b0b1
+			MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_usdhc1: usdhc1grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD1_CMD__SD1_CMD		0x170f9
+			MX6QDL_PAD_SD1_CLK__SD1_CLK		0x100f9
+			MX6QDL_PAD_SD1_DAT0__SD1_DATA0		0x170f9
+			MX6QDL_PAD_SD1_DAT1__SD1_DATA1		0x170f9
+			MX6QDL_PAD_SD1_DAT2__SD1_DATA2		0x170f9
+			MX6QDL_PAD_SD1_DAT3__SD1_DATA3		0x170f9
+			MX6QDL_PAD_GPIO_1__GPIO1_IO01		0x1b0b0
+		>;
+	};
+
+	pinctrl_usdhc3: usdhc3grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD3_CMD__SD3_CMD		0x17099
+			MX6QDL_PAD_SD3_CLK__SD3_CLK		0x10099
+			MX6QDL_PAD_SD3_DAT0__SD3_DATA0		0x17099
+			MX6QDL_PAD_SD3_DAT1__SD3_DATA1		0x17099
+			MX6QDL_PAD_SD3_DAT2__SD3_DATA2		0x17099
+			MX6QDL_PAD_SD3_DAT3__SD3_DATA3		0x17099
+			MX6QDL_PAD_SD3_DAT4__SD3_DATA4		0x17099
+			MX6QDL_PAD_SD3_DAT5__SD3_DATA5		0x17099
+			MX6QDL_PAD_SD3_DAT6__SD3_DATA6		0x17099
+			MX6QDL_PAD_SD3_DAT7__SD3_DATA7		0x17099
+			MX6QDL_PAD_SD3_RST__SD3_RESET		0x1b0b1
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6qdl-vicut1.dtsi b/arch/arm/dts/imx6qdl-vicut1.dtsi
new file mode 100644
index 0000000000..dc18614f89
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-vicut1.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+	gpio_key_pwr: gpio_keys {
+		compatible = "gpio-keys";
+		autorepeat;
+
+		power {
+			label = "GPIO Key Power";
+			gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+			linux,code = <KEY_POWER>;
+			gpio-key,wakeup;
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		debug0 {
+			label = "debug0";
+			gpios = <&gpio1 8 0>;
+			linux,default-trigger = "heartbeat";
+		};
+
+		debug1 {
+			label = "debug1";
+			gpios = <&gpio1 9 0>;
+			linux,default-trigger = "mmc";
+		};
+
+		power_led {
+			label = "power_led";
+			gpios = <&gpio2 24 0>;
+			default-state = "on";
+		};
+
+		isb_led {
+			label = "isb_led";
+			gpios = <&gpio4 31 0>;
+			default-state = "off";
+		};
+	};
+};
+
+&clks {
+	assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+	assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&uart3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart3>;
+	status = "okay";
+};
+
+&i2c3 {
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+};
+
+&iomuxc {
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			/* CAN1_SR + CAN2_SR GPIO outputs */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x13070
+			/* CAN1_TERM */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+			/* ITU656_nRESET */
+			MX6QDL_PAD_GPIO_2__GPIO1_IO02		0x1b0b0
+			/* CAM1_MIRROR */
+			MX6QDL_PAD_GPIO_3__GPIO1_IO03		0x130b0
+			/* CAM2_MIRROR */
+			MX6QDL_PAD_GPIO_4__GPIO1_IO04		0x130b0
+			/* CAM_nDETECT */
+			MX6QDL_PAD_GPIO_17__GPIO7_IO12		0x1b0b0
+			/* nON_SWITCH */
+			MX6QDL_PAD_EIM_CS0__GPIO2_IO23		0x1b0b0
+			/* ISB_IN1 */
+			MX6QDL_PAD_EIM_A16__GPIO2_IO22		0x130b0
+			/* ISB_nIN2 */
+			MX6QDL_PAD_EIM_A17__GPIO2_IO21		0x1b0b0
+			/* WARN_LIGHT */
+			MX6QDL_PAD_EIM_A19__GPIO2_IO19		0x100b0
+			/* ON2_FB */
+			MX6QDL_PAD_EIM_A25__GPIO5_IO02		0x100b0
+			/* YACO_nIRQ */
+			MX6QDL_PAD_EIM_D23__GPIO3_IO23		0x1b0b0
+			/* YACO_BOOT0 */
+			MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x130b0
+			/* YACO_nRESET */
+			MX6QDL_PAD_EIM_D31__GPIO3_IO31		0x1b0b0
+			/* FORCE_ON1 */
+			MX6QDL_PAD_EIM_EB2__GPIO2_IO30		0x1b0b0
+			/* AUDIO_nRESET */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1f0b0
+			/* ITU656_nPDN */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+
+			/* HW revision detect */
+			/* REV_ID0 */
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+			/* REV_ID1 = PWM output LED_PWM (SION) */
+			/* defined in &pinctrl_pwm3 */
+			/* REV_ID2 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+			/* REV_ID3 */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+			/* REV_ID4 */
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+
+			/* New in HW revision 1 */
+			MX6QDL_PAD_EIM_D20__GPIO3_IO20	0x100b0 /* ON1_FB */
+			MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* DIP1_FB */
+
+			/* New in UTC (UT1 HW revision 1) and TGO */
+			/* WHEEL */
+			MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x100b0
+			/* RADAR */
+			MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x100b0
+			/* PTO */
+			MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x100b0
+			/* CPU_ON1_CTRL */
+			MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0
+			/* CPU_ON2_CTRL */
+			MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x1b0b0
+			/* CPU_HITCH_IN_OUT */
+			MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x100b0
+			/* CPU_LIGHT_ON */
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b0
+			/* CPU_CONTACT_IN */
+			MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x100b0
+		>;
+	};
+
+	pinctrl_usbotg: usbotggrp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D21__USB_OTG_OC	0x1b0b0
+			/* power enable, high active */
+			MX6QDL_PAD_EIM_D22__GPIO3_IO22	0x1b0b0
+		>;
+	};
+
+	/* YaCO AUX Uart */
+	pinctrl_uart1: uart1grp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA	0x1b0b1
+			MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA	0x1b0b1
+		>;
+	};
+
+	/* YaCO Touchscreen UART */
+	pinctrl_uart3: uart3grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
+			MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		fsl,pins = <
+			/* DEBUG0A */
+			MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16	0x1b0b0
+			/* DEBUG1A */
+			MX6QDL_PAD_DI0_PIN15__GPIO4_IO17	0x1b0b0
+			/* DEBUG0 */
+			MX6QDL_PAD_GPIO_8__GPIO1_IO08		0x1b0b0
+			/* DEBUG1 */
+			MX6QDL_PAD_GPIO_9__GPIO1_IO09		0x1b0b0
+			/* POWER_LED */
+			MX6QDL_PAD_EIM_CS1__GPIO2_IO24		0x1b0b0
+			/* ISB_LED */
+			MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31	0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			/* ISB LED (not in TGO or UTC version 1+) */
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm3: pwm3grp {
+		fsl,pins = <
+			/* REV_ID1 = PWM output LED_PWM (SION for ID) */
+			MX6QDL_PAD_SD4_DAT1__PWM3_OUT   0x4001b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6qp-prtwd3.dts b/arch/arm/dts/imx6qp-prtwd3.dts
new file mode 100644
index 0000000000..0ef0bae036
--- /dev/null
+++ b/arch/arm/dts/imx6qp-prtwd3.dts
@@ -0,0 +1,675 @@
+/*
+ * Copyright (c) 2018 Protonic Holland
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include <arm/imx6qp.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+
+/ {
+	model = "Protonic WD3 board";
+	compatible = "prt,prtwd3", "fsl,imx6qp";
+
+	memory@10000000 {
+		device_type = "memory";
+		reg = <0x10000000 0x20000000>;
+	};
+
+	memory@80000000 {
+		device_type = "memory";
+		reg = <0x80000000 0x20000000>;
+	};
+
+	aliases {
+		mdio-gpio0 = &mdio0;
+	};
+
+	usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_wifi_npd>;
+		reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+	};
+
+	clk20m_can: fdcan_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <20000000>;
+	};
+
+	clk25m_switch: switch_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk25m_phy3: phy3_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+
+	clk50m_phy: phy_clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <50000000>;
+	};
+
+	mdio0: mdio {
+		compatible = "virtual,mdio-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_mdio0>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		gpios = <&gpio5 6 GPIO_ACTIVE_HIGH
+			 &gpio5 7 GPIO_ACTIVE_HIGH>;
+	};
+
+	display_panel0 {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_lcd>;
+
+		port {
+			display_panel0_in: endpoint {
+				remote-endpoint = <&serializer0_out>;
+			};
+		};
+	};
+
+	display_panel1 {
+		compatible = "kyo,tcg121xglp";
+		backlight = <&backlight_panel1>;
+
+		port {
+			display_panel1_in: endpoint {
+				remote-endpoint = <&serializer1_out>;
+			};
+		};
+	};
+
+	backlight_lcd: backlight_lcd {
+		compatible = "pwm-backlight";
+		pwms = <&pwm1 0 5000000>;
+		brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <15>;
+		power-supply = <&reg_3v3>;
+	};
+
+	backlight_panel1: backlight_panel1 {
+		compatible = "pwm-backlight";
+		pwms = <&pwm2 0 5000000>;
+		brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>;
+		default-brightness-level = <0>;
+		power-supply = <&reg_3v3>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	status = "okay";
+
+	clocks = <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET>,
+		 <&clks IMX6QDL_CLK_ENET_REF>,
+		 <&clks IMX6QDL_CLK_ENET_REF>;
+	clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+	assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
+	assigned-clock-rates = <125000000>;
+
+	phy-mode = "rgmii";
+	fixed-link {
+		speed = <100>;
+		full-duplex;
+	};
+
+	mdio1: mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		/* Microchip KSZ9031 */
+		rgmii_phy: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+
+			interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>;
+
+			/* FIXME: tx/rx clk skew are currently set by imx
+                         * platform driver. Write own walues here to not depend
+                         * fixup of horror.
+                         */
+
+			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+			/* reset assert time is provided by documentation */
+			reset-assert-us = <10000>;
+			/* documented reset deassert time (100us) is not enough
+                         * use test value of 300us.
+			 */
+			reset-deassert-us = <1000>;
+
+			clocks = <&clk25m_phy3>;
+		};
+	};
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+	status = "okay";
+	sja1105_switch: sja1105@0 {
+		reg = <0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "nxp,sja1105q";
+		spi-max-frequency = <4000000>;
+		spi-cpha;
+		spi-rx-delay-us = <1>;
+		spi-tx-delay-us = <1>;
+
+		reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+
+		clocks = <&clk25m_switch>;
+		#clock-cells = <1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				label = "usb";
+				phy-handle = <&usbeth_phy>;
+				phy-mode = "rmii";
+			};
+
+			port@1 {
+				reg = <1>;
+				label = "t1slave";
+				phy-handle = <&tja1102_phy1>;
+				phy-mode = "rmii";
+			};
+
+			port@2 {
+				reg = <2>;
+				label = "t1master";
+				phy-handle = <&tja1102_phy0>;
+				phy-mode = "rmii";
+
+			};
+
+			port@3 {
+				reg = <3>;
+				label = "rj45";
+				phy-handle = <&rgmii_phy>;
+				phy-mode = "rgmii-id";
+			};
+
+			port@4 {
+				reg = <4>;
+				label = "cpu";
+				ethernet = <&fec>;
+				phy-mode = "rgmii-id";
+
+				fixed-link {
+					speed = <100>;
+					full-duplex;
+				};
+			};
+		};
+	};
+};
+
+&mdio0 {
+	usbeth_phy: ethernet-phy@3 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x3>;
+
+		interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>;
+		micrel,led-mode = <0>;
+
+		reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+		reset-assert-us = <500>;
+		reset-deassert-us = <1000>;
+
+		/* FIXME: the clock is provided by switch and we should know
+		 * and we should request it only after switch have done clock
+		 * configuration. Since it is currently not implemented,
+		 * use fixed clock.
+		 * WARNING: Using fixed clocks in this case  is potential source
+		 * for evil bugs. Switch may reconfigure, stop or change clk
+		 * freq without letting PHY to know about it.
+		 */
+		clocks = <&clk50m_phy>;
+		clock-names = "rmii-ref";
+	};
+
+	tja1102_phy0: ethernet-phy@4 {
+		compatible = "ethernet-phy-id0180.dc80";
+		reg = <0x4>;
+
+		interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+
+		reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+		/* reset detection time is 20 usec.  */
+		reset-assert-us = <20>;
+		/* reset to standby 2 msec.  */
+		reset-deassert-us = <2000>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		tja1102_phy1: ethernet-phy@5 {
+			reg = <0x5>;
+
+			interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+		};
+	};
+};
+
+&ecspi3 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi3>;
+	status = "okay";
+	can3: can@0 {
+		compatible = "microchip,mcp2518fd";
+		spi-max-frequency = <5000000>;
+		reg = <0>;
+		clocks = <&clk20m_can>;
+		interrupt-parent = <&gpio4>;
+		interrupts = <25 0x2>;
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	status = "okay";
+
+	serializer0: ds90ub927@c {
+		compatible = "ti,ds90ub927";
+		reg = <0x0c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			serializer0_in: endpoint {
+				remote-endpoint = <&lvds0_out>;
+			};
+		};
+		/* port@1 {
+			reg = <1>;
+			serializer0_audio_in: endpoint {
+				remote-endpoint = <&audio_i2s0_out>;
+			};
+		}; */
+		port@2 {
+			reg = <2>;
+			serializer0_out: endpoint {
+				remote-endpoint = <&display_panel0_in>;
+			};
+		};
+	};
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	status = "okay";
+
+	serializer1: ds90ub927@c {
+		compatible = "ti,ds90ub927";
+		reg = <0x0c>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			serializer1_in: endpoint {
+				remote-endpoint = <&lvds1_out>;
+			};
+		};
+		port@2 {
+			reg = <2>;
+			serializer1_out: endpoint {
+				remote-endpoint = <&display_panel1_in>;
+			};
+		};
+	};
+
+	camdeser: ds90ub954@30 {
+		compatible = "ti,ds90ub954";
+		reg = <0x30>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		port@0 {
+			reg = <0>;
+			camdeser_fpd_link_in: endpoint {
+			};
+		};
+		port@1 {
+			reg = <1>;
+			camdeser_mipi_out: endpoint {
+				remote-endpoint = <&mipi_csi_in>;
+			};
+		};
+	};
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	no-1-8-v;	/* force 3.3V VIO */
+	non-removable;
+	mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+	pm-ignore-notify;
+	status = "okay";
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	brcmf: bcrmf@1 {
+		reg = <1>;
+		compatible = "brcm,bcm4329-fmac";
+	};
+};
+
+&i2c3 {
+	adc@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <1>;
+			ti,datarate = <3>;
+		};
+	};
+};
+
+&ldb {
+	status = "okay";
+
+	lvds-channel@0 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds0_out: endpoint {
+				remote-endpoint = <&serializer0_in>;
+			};
+		};
+	};
+
+	lvds-channel@1 {
+		status = "okay";
+
+		port@4 {
+			reg = <4>;
+
+			lvds1_out: endpoint {
+				remote-endpoint = <&serializer1_in>;
+			};
+		};
+	};
+};
+
+&mipi_csi {
+	status = "okay";
+	port@0 {
+		reg = <0>;
+
+		mipi_csi_in: endpoint {
+			remote-endpoint = <&camdeser_mipi_out>;
+		};
+	};
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+	/* Empty, to disable parallel camera from PRTI6Q */
+};
+
+&pwm1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm1>;
+	status = "okay";
+};
+
+&pwm2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_pwm2>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC		    0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0		0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1		0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2		0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3		0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC		0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0		0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1		0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2		0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3		0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x10030
+
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO		0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC		0x10030
+
+			/* Configure clock provider for RGMII ref clock */
+			MX6QDL_PAD_GPIO_16__ENET_REF_CLK	0x4001b0b0
+			/* Configure clock consumer for RGMII ref clock */
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x10030
+
+			/* SJA1105Q switch reset */
+			MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05	0x10030
+
+			/* phy3/rgmii_phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x10030
+			/* phy3/rgmii_phy int */
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x40010000
+		>;
+	};
+
+	pinctrl_mdio0: mdio0grp {
+		fsl,pins = <
+			/* phy0/usbeth_phy reset */
+			MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11	0x10030
+			/* phy0/usbeth_phy int */
+			MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12	0x100b1
+
+			/* phy12/tja1102_phy0 reset */
+			MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09	0x10030
+			/* phy12/tja1102_phy0 int */
+			MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08	0x100b1
+			/* phy12/tja1102_phy0 enable. Set 100K pull-up */
+			MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10	0x1f030
+		>;
+	};
+
+	pinctrl_ecspi2: ecspi2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_OE__ECSPI2_MISO		0x100b1
+			MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK		0x100b1
+			MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI		0x100b1
+			MX6QDL_PAD_EIM_RW__GPIO2_IO26		0x000b1
+		>;
+	};
+
+
+
+	pinctrl_hog: hoggrp {
+		fsl,pins = <
+			/* SGTL5000 sys_mclk */
+			MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1		0x030b0
+			/* CAN1_SR + CAN2_SR GPIO outputs */
+			MX6QDL_PAD_KEY_COL3__GPIO4_IO12		0x13070
+			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13		0x13070
+			/* CAN1_TERM (not used on WD3) */
+			MX6QDL_PAD_GPIO_0__GPIO1_IO00		0x1b0b0
+
+			/* HW revision detect */
+			/* REV_ID0 */
+			MX6QDL_PAD_SD4_DAT0__GPIO2_IO08		0x1b0b0
+			/* REV_ID1 */
+			MX6QDL_PAD_SD4_DAT1__GPIO2_IO09		0x1b0b0
+			/* REV_ID2 */
+			MX6QDL_PAD_SD4_DAT2__GPIO2_IO10		0x1b0b0
+			/* REV_ID3 */
+			MX6QDL_PAD_SD4_DAT3__GPIO2_IO11		0x1b0b0
+			/* REV_ID4 */
+			MX6QDL_PAD_SD4_DAT4__GPIO2_IO12		0x1b0b0
+
+			/* USB charging control */
+			/* CHG Control */
+			MX6QDL_PAD_NANDF_CS0__GPIO6_IO11	0x130b0
+			/* RID0 */
+			MX6QDL_PAD_NANDF_CS1__GPIO6_IO14	0x130b0
+			/* RID1 */
+			MX6QDL_PAD_NANDF_CS2__GPIO6_IO15	0x130b0
+			/* RID2 */
+			MX6QDL_PAD_NANDF_CS3__GPIO6_IO16	0x130b0
+
+			/* Power VSEL and TG */
+			/* VSEL */
+			MX6QDL_PAD_NANDF_ALE__GPIO6_IO08	0x1b0b0
+			/* TG */
+			MX6QDL_PAD_NANDF_CLE__GPIO6_IO07	0x1b0b0
+
+			/* Display panel 0 GPIO */
+			/* L/R */
+			MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28	0x1b0b0
+			/* TS_nINT */
+			MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29	0x1b0b0
+			/* EN */
+			MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30	0x1b0b0
+			/* LVDS0_nINT */
+			MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00	0x1b0b0
+			/* LVDS0_PD */
+			MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01	0x1b0b0
+
+			/* Display panel 1 GPIO */
+			/* L/R */
+			MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19	0x1b0b0
+			/* TS_nINT */
+			MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20	0x1b0b0
+			/* EN */
+			MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18	0x1b0b0
+			/* LVDS1_nINT */
+			MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25	0x1b0b0
+			/* LVDS1_PD */
+			MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21	0x1b0b0
+
+			/* Camera */
+			/* CAM_GPIO0 */
+			MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31	0x1b0b0
+			/* CAM_nINT */
+			MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02	0x1b0b0
+			/* CAM_GPIO1 */
+			MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03	0x1b0b0
+			/* CAM_nPD */
+			MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04	0x1b0b0
+			/* CAM_LOCK */
+			MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05	0x1b0b0
+
+			/* USB ethernet reset (asix) */
+			MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26	0x1b0b0
+		>;
+	};
+
+	pinctrl_wifi_npd: wifinpd {
+		fsl,pins = <
+			/* WL_REG_ON */
+			MX6QDL_PAD_NANDF_RB0__GPIO6_IO10	0x13069
+		>;
+	};
+
+	pinctrl_usdhc2: usdhc2grp {
+		fsl,pins = <
+			MX6QDL_PAD_SD2_CMD__SD2_CMD		0x170b9
+			MX6QDL_PAD_SD2_CLK__SD2_CLK		0x100b9
+			MX6QDL_PAD_SD2_DAT0__SD2_DATA0		0x170b9
+			MX6QDL_PAD_SD2_DAT1__SD2_DATA1		0x170b9
+			MX6QDL_PAD_SD2_DAT2__SD2_DATA2		0x170b9
+			MX6QDL_PAD_SD2_DAT3__SD2_DATA3		0x170b9
+		>;
+	};
+
+	pinctrl_audmux: audmuxgrp {
+		fsl,pins = <
+			MX6QDL_PAD_CSI0_DAT4__AUD3_TXC		0x130b0
+			MX6QDL_PAD_CSI0_DAT5__AUD3_TXD		0x110b0
+			MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS		0x130b0
+		>;
+	};
+
+	pinctrl_i2c2: i2c2grp {
+		fsl,pins = <
+			MX6QDL_PAD_EIM_EB2__I2C2_SCL		0x4001f8b1
+			MX6QDL_PAD_EIM_D16__I2C2_SDA		0x4001f8b1
+		>;
+	};
+
+	pinctrl_leds: ledsgrp {
+		/* No leds */
+		fsl,pins = <>;
+	};
+
+	pinctrl_ecspi3: ecspi3grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK	0x100b1
+			MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI	0x100b1
+			MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO	0x100b1
+			/* CS */
+			MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24	0x000b1
+			/* CAN2_nINT */
+			MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25	0x1b0b1
+		>;
+	};
+
+	pinctrl_pwm1: pwm1grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT8__PWM1_OUT		0x1b0b0
+		>;
+	};
+
+	pinctrl_pwm2: pwm2grp {
+		fsl,pins = <
+			MX6QDL_PAD_DISP0_DAT9__PWM2_OUT		0x1b0b0
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6qp-vicutp.dts b/arch/arm/dts/imx6qp-vicutp.dts
new file mode 100644
index 0000000000..44cfe68867
--- /dev/null
+++ b/arch/arm/dts/imx6qp-vicutp.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6qp.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+	model = "Kverneland UT1P Board";
+	compatible = "kvg,vicutp", "fsl,imx6qp";
+
+	memory {
+		reg = <0x10000000 0x80000000>;
+	};
+};
+
+&fec {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet>;
+	phy-mode = "rgmii";
+	/* phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; */
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl_enet: enetgrp {
+		fsl,pins = <
+			/* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
+			MX6QDL_PAD_RGMII_RXC__RGMII_RXC         0x1b030
+			MX6QDL_PAD_RGMII_RD0__RGMII_RD0         0x1b030
+			MX6QDL_PAD_RGMII_RD1__RGMII_RD1         0x1b030
+			MX6QDL_PAD_RGMII_RD2__RGMII_RD2         0x1b030
+			MX6QDL_PAD_RGMII_RD3__RGMII_RD3         0x1b030
+			MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL   0x1b030
+			MX6QDL_PAD_RGMII_TXC__RGMII_TXC         0x10030
+			MX6QDL_PAD_RGMII_TD0__RGMII_TD0         0x10030
+			MX6QDL_PAD_RGMII_TD1__RGMII_TD1         0x10030
+			MX6QDL_PAD_RGMII_TD2__RGMII_TD2         0x10030
+			MX6QDL_PAD_RGMII_TD3__RGMII_TD3         0x10030
+			MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL   0x10030
+			MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK    0x10030
+			MX6QDL_PAD_ENET_MDIO__ENET_MDIO         0x10030
+			MX6QDL_PAD_ENET_MDC__ENET_MDC           0x10030
+
+			/* Phy reset */
+			MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25	0x1b0b0
+			MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28	0x1b0b1
+		>;
+	};
+};
diff --git a/arch/arm/dts/imx6ul-prti6g.dts b/arch/arm/dts/imx6ul-prti6g.dts
new file mode 100644
index 0000000000..e65198bab2
--- /dev/null
+++ b/arch/arm/dts/imx6ul-prti6g.dts
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2016 Protonic Holland
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-prti6g.dtsi"
+
+/ {
+	model = "Protonic PRTI6G Board";
+	compatible = "prt,prti6g", "fsl,imx6ul";
+};
+
+&pinctrl_hog {
+	fsl,pins = <
+		/* HW revision detect */
+		MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0	/* REV_ID0 */
+		MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0	/* REV_ID1 */
+		MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0 /* REV_ID2 */
+		MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0	/* REV_ID3 */
+		MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0	/* BOARD_ID0 */
+		MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0	/* BOARD_ID1 */
+		MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0	/* BOARD_ID2 */
+		MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0	/* BOARD_ID3 */
+
+		/* Safety controller IO */
+		MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06	0x1b0b0	/* WAKE_SC */
+		MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x1b0b0	/* PROGRAM_SC */
+	>;
+};
+
+&ecspi2 {
+	status = "okay";
+};
+
+&can2 {
+	status = "okay";
+};
+
+&i2c2 {
+	can_adc: ads1015@49 {
+		compatible = "ti,ads1015";
+		reg = <0x49>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		channel@4 {
+			reg = <4>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@5 {
+			reg = <5>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@6 {
+			reg = <6>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+
+		channel@7 {
+			reg = <7>;
+			ti,gain = <3>;
+			ti,datarate = <3>;
+		};
+	};
+};
diff --git a/arch/arm/dts/imx6ul-prti6g.dtsi b/arch/arm/dts/imx6ul-prti6g.dtsi
new file mode 100644
index 0000000000..c20bbd5bc2
--- /dev/null
+++ b/arch/arm/dts/imx6ul-prti6g.dtsi
@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2016 Protonic Holland
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <arm/imx6ul.dtsi>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	chosen {
+		stdout-path = &uart1;
+		environment@0 {
+			compatible = "barebox,environment";
+			device-path = &flash, "partname:env";
+		};
+	};
+
+	memory {
+		reg = <0x80000000 0x10000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_3p2v: 3p2-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "regulator-3P2V";
+			regulator-min-microvolt = <3200000>;
+			regulator-max-microvolt = <3200000>;
+			regulator-always-on;
+		};
+
+		reg_1p35v: 1p35-regulator {
+			compatible = "regulator-fixed";
+			regulator-name = "regulator-1P35V";
+			regulator-min-microvolt = <1350000>;
+			regulator-max-microvolt = <1350000>;
+			regulator-always-on;
+		};
+	};
+
+	leds: leds {
+		compatible = "gpio-leds";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_leds>;
+
+		debug {
+			label = "debug0";
+			gpios = <&gpio4 16 0>;
+			linux,default-trigger = "heartbeat";
+		};
+	};
+};
+
+&usbotg1 {
+	dr_mode = "host";
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usdhc1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+	vmmc-supply = <&reg_3p2v>;
+	wakeup-source;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	bus-width = <8>;
+	non-removable;
+	status = "okay";
+};
+
+&ecspi1 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi1>;
+	status = "okay";
+
+	flash: w25q64fv@0 {
+		compatible = "winbond,w25q64", "jedec,spi-nor";
+		spi-max-frequency = <20000000>;
+		m25p,fast-read;
+		reg = <0>;
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		partition@0 {
+			label = "boot";
+			reg = <0x0 0x60000>;		/* 384 Kb */
+		};
+
+		partition@60000 {
+			label = "env";
+			reg = <0x60000 0x10000>;	/* 64 Kb */
+		};
+
+		partition@70000 {
+			label = "dtb";
+			reg = <0x70000 0x10000>;	/* 64 Kb */
+		};
+
+		partition@80000 {
+			label = "kernel";
+			reg = <0x80000 0x780000>;	/* 7680 Kb */
+		};
+	};
+};
+
+&ecspi2 {
+	fsl,spi-num-chipselects = <1>;
+	cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_ecspi2>;
+};
+
+&i2c1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	/* RFID chip */
+};
+
+&i2c2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	clock-frequency = <100000>;
+	status = "okay";
+
+	rtc: pcf8563@51 {
+		compatible = "nxp,pcf8563";
+		reg = <0x51>;
+	};
+
+	tmp103: tmp103@70 {
+		compatible = "ti,tmp103", "tmp103";
+		reg = <0x70>;
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_fec1 &pinctrl_ethphy0_rst>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+	phy-reset-duration = <11>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@0 {
+			reg = <0>;
+		};
+	};
+};
+
+
+&can1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan1>;
+	status = "okay";
+};
+
+&can2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog>;
+
+	prti6g {
+		pinctrl_hog: hoggrp {
+			fsl,pins = <
+				/* HW revision detect */
+				MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x1b0b0	/* REV_ID0 */
+				MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09	0x1b0b0	/* REV_ID1 */
+				MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10	0x1b0b0 /* REV_ID2 */
+				MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11	0x1b0b0	/* REV_ID3 */
+				MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13	0x1b0b0	/* BOARD_ID0 */
+				MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14	0x1b0b0	/* BOARD_ID1 */
+				MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15	0x1b0b0	/* BOARD_ID2 */
+				MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12	0x1b0b0	/* BOARD_ID3 */
+
+				/* CAN diagnostics (nSMBALERT) */
+				MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x1b0b0
+			>;
+		};
+
+		pinctrl_leds: ledsgrp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_DQS__GPIO4_IO16		0x1b0b0
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
+				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x070b1
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x07099
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x070b1
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x070b1
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x070b1
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x070b1
+				MX6UL_PAD_NAND_READY_B__GPIO4_IO12	0x170b0 /* SD1 CD */
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD		0x170f9
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK		0x100f9
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0	0x170f9
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1	0x170f9
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2	0x170f9
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3	0x170f9
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4	0x170f9
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5	0x170f9
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6	0x170f9
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7	0x170f9
+				MX6UL_PAD_NAND_ALE__USDHC2_RESET_B	0x170b0
+			>;
+		};
+
+		pinctrl_ecspi1: ecspi1grp {
+			fsl,pins = <
+				MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 	0x0b0b0
+				MX6UL_PAD_CSI_DATA05__GPIO4_IO26	0x000b1
+				MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI	0x0b0b0
+				MX6UL_PAD_CSI_DATA07__ECSPI1_MISO	0x0b0b0
+			>;
+		};
+
+		pinctrl_ecspi2: ecspi2grp {
+			fsl,pins = <
+				MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 	0x0b0b0
+				MX6UL_PAD_CSI_DATA01__GPIO4_IO22	0x000b1
+				MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI	0x0b0b0
+				MX6UL_PAD_CSI_DATA03__ECSPI2_MISO	0x0b0b0
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6UL_PAD_CSI_MCLK__I2C1_SDA		0x4001b8b0
+				MX6UL_PAD_CSI_PIXCLK__I2C1_SCL		0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6UL_PAD_CSI_VSYNC__I2C2_SDA		0x4001b8b0
+				MX6UL_PAD_CSI_HSYNC__I2C2_SCL		0x4001b8b0
+			>;
+		};
+
+		pinctrl_fec1: fec1grp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x100b0
+				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x100b0
+				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			>;
+		};
+
+		pinctrl_ethphy0_rst: ethphy-rstgrp-0 {
+			fsl,pins = <
+				MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x00880 /* PHY RESET */
+			>;
+		};
+
+		pinctrl_flexcan1: flexcan1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX	0x0b0b0
+				MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX	0x0b0b0
+				MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x0b0b0	/* SR */
+				MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04	0x0b0b0	/* TERM */
+				MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02	0x0b0b0	/* nSMBALERT */
+			>;
+		};
+
+		pinctrl_flexcan2: flexcan2grp {
+			fsl,pins = <
+				MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX	0x0b0b0
+				MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX	0x0b0b0
+				MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05	0x0b0b0	/* SR */
+			>;
+		};
+	};
+};
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2020-06-16  5:52 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-06-16  5:52 [PATCH v2 0/2] transfer Protonic barebox development to the mainline Oleksij Rempel
2020-06-16  5:52 ` Oleksij Rempel [this message]
2020-06-16  5:52 ` [PATCH v2 2/2] ARM: add imx6 based Protonic boads Oleksij Rempel
2020-06-18 12:58 ` [PATCH v2 0/2] transfer Protonic barebox development to the mainline Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200616055202.9308-2-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=david@protonic.nl \
    --cc=linux@rempel-privat.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox