* [PATCH v2 0/2] transfer Protonic barebox development to the mainline
@ 2020-06-16 5:52 Oleksij Rempel
2020-06-16 5:52 ` [PATCH v2 1/2] ARM: dts: imx6: add Protonic boards Oleksij Rempel
` (2 more replies)
0 siblings, 3 replies; 4+ messages in thread
From: Oleksij Rempel @ 2020-06-16 5:52 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel, David Jander
This is initial patch set to transfer Protonic barebox development to the mainline.
Most important changes of this patches are in
arch/arm/boards/protonic-imx6 folder. The devicetrees are mostly
unchanged, since they will be replaced by kernel version soon.
changes v2:
- use imx6_cpu_lowlevel_init instead of arm_cpu_lowlevel_init
- use imx6q_barebox_entry instead of barebox_arm_entry
- remove debug_ll. Currently it is not needed
- remove part of pinmuxing from DCD files
Oleksij Rempel (2):
ARM: dts: imx6: add Protonic boards
ARM: add imx6 based Protonic boads
arch/arm/boards/Makefile | 1 +
arch/arm/boards/protonic-imx6/Makefile | 1 +
.../boards/protonic-imx6/ddr3-defines.imxcfg | 350 +++++++++
.../protonic-imx6/flash-header-alti6p.imxcfg | 123 ++++
.../protonic-imx6/flash-header-lanmcu.imxcfg | 115 +++
.../protonic-imx6/flash-header-plybas.imxcfg | 123 ++++
.../protonic-imx6/flash-header-plym2m.imxcfg | 123 ++++
.../protonic-imx6/flash-header-prti6g.imxcfg | 81 +++
.../protonic-imx6/flash-header-prti6q.imxcfg | 123 ++++
.../protonic-imx6/flash-header-prtmvt.imxcfg | 123 ++++
.../protonic-imx6/flash-header-prtrvt.imxcfg | 123 ++++
.../protonic-imx6/flash-header-prtvt7.imxcfg | 115 +++
.../protonic-imx6/flash-header-prtwd2.imxcfg | 229 ++++++
.../protonic-imx6/flash-header-prtwd3.imxcfg | 280 ++++++++
.../protonic-imx6/flash-header-victgo.imxcfg | 123 ++++
.../protonic-imx6/flash-header-vicut1.imxcfg | 123 ++++
.../protonic-imx6/flash-header-vicut1q.imxcfg | 127 ++++
.../protonic-imx6/flash-header-vicutp.imxcfg | 174 +++++
arch/arm/boards/protonic-imx6/lowlevel.c | 191 +++++
.../protonic-imx6/lpddr2-defines.imxcfg | 384 ++++++++++
.../boards/protonic-imx6/padsetup-dl.imxcfg | 70 ++
.../boards/protonic-imx6/padsetup-q.imxcfg | 69 ++
.../boards/protonic-imx6/padsetup-ul.imxcfg | 42 ++
arch/arm/dts/Makefile | 16 +
arch/arm/dts/imx6dl-alti6p.dts | 118 +++
arch/arm/dts/imx6dl-lanmcu.dts | 434 +++++++++++
arch/arm/dts/imx6dl-plybas.dts | 186 +++++
arch/arm/dts/imx6dl-plym2m.dts | 132 ++++
arch/arm/dts/imx6dl-prtmvt.dts | 164 +++++
arch/arm/dts/imx6dl-prtrvt.dts | 182 +++++
arch/arm/dts/imx6dl-prtvt7.dts | 472 ++++++++++++
arch/arm/dts/imx6dl-victgo.dts | 145 ++++
arch/arm/dts/imx6dl-vicut1.dts | 51 ++
arch/arm/dts/imx6q-prti6q.dts | 554 ++++++++++++++
arch/arm/dts/imx6q-prtwd2.dts | 188 +++++
arch/arm/dts/imx6q-vicut1.dts | 52 ++
arch/arm/dts/imx6qdl-prti6q.dtsi | 174 +++++
arch/arm/dts/imx6qdl-vicut1.dtsi | 208 ++++++
arch/arm/dts/imx6qp-prtwd3.dts | 675 ++++++++++++++++++
arch/arm/dts/imx6qp-vicutp.dts | 52 ++
arch/arm/dts/imx6ul-prti6g.dts | 81 +++
arch/arm/dts/imx6ul-prti6g.dtsi | 330 +++++++++
arch/arm/mach-imx/Kconfig | 6 +
images/Makefile.imx | 30 +
44 files changed, 7463 insertions(+)
create mode 100644 arch/arm/boards/protonic-imx6/Makefile
create mode 100644 arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/lowlevel.c
create mode 100644 arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/padsetup-q.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg
create mode 100644 arch/arm/dts/imx6dl-alti6p.dts
create mode 100644 arch/arm/dts/imx6dl-lanmcu.dts
create mode 100644 arch/arm/dts/imx6dl-plybas.dts
create mode 100644 arch/arm/dts/imx6dl-plym2m.dts
create mode 100644 arch/arm/dts/imx6dl-prtmvt.dts
create mode 100644 arch/arm/dts/imx6dl-prtrvt.dts
create mode 100644 arch/arm/dts/imx6dl-prtvt7.dts
create mode 100644 arch/arm/dts/imx6dl-victgo.dts
create mode 100644 arch/arm/dts/imx6dl-vicut1.dts
create mode 100644 arch/arm/dts/imx6q-prti6q.dts
create mode 100644 arch/arm/dts/imx6q-prtwd2.dts
create mode 100644 arch/arm/dts/imx6q-vicut1.dts
create mode 100644 arch/arm/dts/imx6qdl-prti6q.dtsi
create mode 100644 arch/arm/dts/imx6qdl-vicut1.dtsi
create mode 100644 arch/arm/dts/imx6qp-prtwd3.dts
create mode 100644 arch/arm/dts/imx6qp-vicutp.dts
create mode 100644 arch/arm/dts/imx6ul-prti6g.dts
create mode 100644 arch/arm/dts/imx6ul-prti6g.dtsi
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 1/2] ARM: dts: imx6: add Protonic boards
2020-06-16 5:52 [PATCH v2 0/2] transfer Protonic barebox development to the mainline Oleksij Rempel
@ 2020-06-16 5:52 ` Oleksij Rempel
2020-06-16 5:52 ` [PATCH v2 2/2] ARM: add imx6 based Protonic boads Oleksij Rempel
2020-06-18 12:58 ` [PATCH v2 0/2] transfer Protonic barebox development to the mainline Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Oleksij Rempel @ 2020-06-16 5:52 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel, David Jander, Oleksij Rempel
From: Oleksij Rempel <linux@rempel-privat.de>
This DTS will be replaced by kernel version
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/dts/imx6dl-alti6p.dts | 118 ++++++
arch/arm/dts/imx6dl-lanmcu.dts | 434 ++++++++++++++++++++
arch/arm/dts/imx6dl-plybas.dts | 186 +++++++++
arch/arm/dts/imx6dl-plym2m.dts | 132 ++++++
arch/arm/dts/imx6dl-prtmvt.dts | 164 ++++++++
arch/arm/dts/imx6dl-prtrvt.dts | 182 +++++++++
arch/arm/dts/imx6dl-prtvt7.dts | 472 +++++++++++++++++++++
arch/arm/dts/imx6dl-victgo.dts | 145 +++++++
arch/arm/dts/imx6dl-vicut1.dts | 51 +++
arch/arm/dts/imx6q-prti6q.dts | 554 +++++++++++++++++++++++++
arch/arm/dts/imx6q-prtwd2.dts | 188 +++++++++
arch/arm/dts/imx6q-vicut1.dts | 52 +++
arch/arm/dts/imx6qdl-prti6q.dtsi | 174 ++++++++
arch/arm/dts/imx6qdl-vicut1.dtsi | 208 ++++++++++
arch/arm/dts/imx6qp-prtwd3.dts | 675 +++++++++++++++++++++++++++++++
arch/arm/dts/imx6qp-vicutp.dts | 52 +++
arch/arm/dts/imx6ul-prti6g.dts | 81 ++++
arch/arm/dts/imx6ul-prti6g.dtsi | 330 +++++++++++++++
18 files changed, 4198 insertions(+)
create mode 100644 arch/arm/dts/imx6dl-alti6p.dts
create mode 100644 arch/arm/dts/imx6dl-lanmcu.dts
create mode 100644 arch/arm/dts/imx6dl-plybas.dts
create mode 100644 arch/arm/dts/imx6dl-plym2m.dts
create mode 100644 arch/arm/dts/imx6dl-prtmvt.dts
create mode 100644 arch/arm/dts/imx6dl-prtrvt.dts
create mode 100644 arch/arm/dts/imx6dl-prtvt7.dts
create mode 100644 arch/arm/dts/imx6dl-victgo.dts
create mode 100644 arch/arm/dts/imx6dl-vicut1.dts
create mode 100644 arch/arm/dts/imx6q-prti6q.dts
create mode 100644 arch/arm/dts/imx6q-prtwd2.dts
create mode 100644 arch/arm/dts/imx6q-vicut1.dts
create mode 100644 arch/arm/dts/imx6qdl-prti6q.dtsi
create mode 100644 arch/arm/dts/imx6qdl-vicut1.dtsi
create mode 100644 arch/arm/dts/imx6qp-prtwd3.dts
create mode 100644 arch/arm/dts/imx6qp-vicutp.dts
create mode 100644 arch/arm/dts/imx6ul-prti6g.dts
create mode 100644 arch/arm/dts/imx6ul-prti6g.dtsi
diff --git a/arch/arm/dts/imx6dl-alti6p.dts b/arch/arm/dts/imx6dl-alti6p.dts
new file mode 100644
index 0000000000..8d53100bea
--- /dev/null
+++ b/arch/arm/dts/imx6dl-alti6p.dts
@@ -0,0 +1,118 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+
+/ {
+ model = "Altesco I6P Board";
+ compatible = "alt,alti6p", "fsl,imx6dl";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x40000000>;
+ };
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ ddc-i2c-bus = <&i2c1>;
+ status = "okay";
+};
+
+/* DDC */
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c3 {
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>;
+ clock-names = "ipg", "ahb";
+ status = "okay";
+};
+
+&i2c2 {
+ clock-frequency = <50000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c4 {
+ clock-frequency = <50000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f058
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ /* NOTE: DDC is done via I2C2, so DON'T configure DDC pins for HDMI! */
+ MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_CS3__I2C4_SDA 0x4001f8b1
+ MX6QDL_PAD_NANDF_WP_B__I2C4_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts
new file mode 100644
index 0000000000..b05ed9c3ba
--- /dev/null
+++ b/arch/arm/dts/imx6dl-lanmcu.dts
@@ -0,0 +1,434 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2019 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ model = "LANMCU";
+ compatible = "lan,lanmcu", "fsl,imx6dl";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ memory {
+ reg = <0x10000000 0x10000000>;
+ };
+
+ reg_usb_otg_vbus: otg-vbus-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-OTG-VBUS";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 0>;
+ enable-active-high;
+ };
+
+ usdhc2_pwrseq: usdhc2_pwrseq {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wlan_npd>;
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+ };
+
+ display: display0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_disp>;
+ compatible = "fsl,imx-parallel-display";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "bgr666";
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ panel {
+ compatible = "edt,etm0700g0bdh6";
+ backlight = <&backlight_lcd>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 5 7 9 12 15 20 27 35 47 62 81 107 142 188 248
+ 328 433 573 757 1000>;
+ default-brightness-level = <20>;
+ status = "okay";
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ debug0 {
+ label = "debug0";
+ gpios = <&gpio1 8 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ prti6q {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* HW revision detect */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_ipu1_disp: ipudisp1grp {
+ fsl,pins = <
+ /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ >;
+ };
+
+ pinctrl_wlan_npd: wlan_npd {
+ fsl,pins = <
+ /* WL_REG_ON */
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6QDL_PAD_GPIO_1__SD1_CD_B 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
+ >;
+ };
+
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
+ >;
+ };
+
+ pinctrl_ts_edt: ts1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
+ >;
+ };
+ };
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>;
+ clock-names = "ipg", "ahb";
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ linux,rs485-enabled-at-boot-time;
+ rts-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ linux,rs485-enabled-at-boot-time;
+ rts-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ touchscreen: edt_ft5406@38 {
+ compatible = "edt,edt-ft5406";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ts_edt>;
+ reg = <0x38>;
+ interrupt-parent = <&gpio3>;
+ interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
+
+ touchscreen-size-x = <1792>;
+ touchscreen-size-y = <1024>;
+
+ touchscreen-fuzz-x = <0>;
+ touchscreen-fuzz-y = <0>;
+
+ /* Touch screen calibration */
+ threshold = <50>;
+ gain = <5>;
+ offset = <10>;
+ };
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v;
+ non-removable;
+ mmc-pwrseq = <&usdhc2_pwrseq>;
+ pm-ignore-notify;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+
+ partitions {
+ /*
+ * Map a partition at the last 64k of the area available for
+ * the second stage bootloader.
+ */
+ compatible = "fixed-partitions";
+ #size-cells = <1>;
+ #address-cells = <1>;
+
+ bootstate_backend: bootstate_backend@f0000 {
+ reg = <0xf0000 0x10000>;
+ label = "bootstate";
+ };
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
diff --git a/arch/arm/dts/imx6dl-plybas.dts b/arch/arm/dts/imx6dl-plybas.dts
new file mode 100644
index 0000000000..de0ba05e13
--- /dev/null
+++ b/arch/arm/dts/imx6dl-plybas.dts
@@ -0,0 +1,186 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Plymovent BAS board";
+ compatible = "ply,plybas", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x10000000>;
+ };
+
+ backlight_lcd {
+ status = "disabled";
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@20 {
+ label = "START";
+ linux,code = <31>;
+ gpios = <&gpio5 8 1>;
+ };
+ button@21 {
+ label = "CLEAN";
+ linux,code = <46>;
+ gpios = <&gpio5 9 1>;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ debug0 {
+ label = "debug0";
+ gpios = <&gpio1 8 0>;
+ };
+
+ debug1 {
+ label = "debug1";
+ gpios = <&gpio1 9 0>;
+ };
+
+ light_tower1 {
+ label = "light_tower1";
+ gpios = <&gpio4 22 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ light_tower2 {
+ label = "light_tower2";
+ gpios = <&gpio4 23 0>;
+ };
+
+ light_tower3 {
+ label = "light_tower3";
+ gpios = <&gpio4 24 0>;
+ };
+
+ light_tower4 {
+ label = "light_tower4";
+ gpios = <&gpio4 25 0>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>;
+ clock-names = "ipg", "ahb";
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ fsl,uart-has-rtscts;
+ linux,rs485-enabled-at-boot-time;
+ rs485-rts-delay = <0 20>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* CAN1_SR + CAN2_SR GPIO outputs */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070
+
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0 /* YACO_nIRQ */
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0 /* YACO_BOOT0 */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0 /* YACO_nRESET */
+
+ MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x13070 /* BUZZER */
+ MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x13070 /* ANA_OUT_SD */
+ MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0 /* ANA_OUT_ERR */
+
+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x13070 /* RELAY1 */
+ MX6QDL_PAD_DISP0_DAT12__GPIO5_IO06 0x13070 /* RELAY2 */
+
+ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0 /* IN1 */
+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0 /* IN2 */
+ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1b0b0 /* IN3 */
+ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x1b0b0 /* IN4 */
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x1b0b0 /* IN5 */
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b0 /* IN6 */
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x1b0b0 /* IN7 */
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b0 /* IN8 */
+ MX6QDL_PAD_DISP0_DAT22__GPIO5_IO16 0x1b0b0 /* IN9 */
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b0 /* IN10 */
+ MX6QDL_PAD_DI0_PIN4__GPIO4_IO20 0x1b0b0 /* IN11 */
+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* IN12 */
+
+ MX6QDL_PAD_DI0_PIN3__GPIO4_IO19 0x1a0b0 /* HMI */
+
+ /* HW revision detect */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* DEBUG0 */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0 /* DEBUG1 */
+
+ MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x13070 /* LED1 (lighttower) */
+ MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x13070 /* LED2 (lighttower) */
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x13070 /* LED3 (lighttower) */
+ MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x13070 /* LED4 (lighttower) */
+ >;
+ };
+
+ /* RS485 UART */
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x130b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6dl-plym2m.dts b/arch/arm/dts/imx6dl-plym2m.dts
new file mode 100644
index 0000000000..b66321fb46
--- /dev/null
+++ b/arch/arm/dts/imx6dl-plym2m.dts
@@ -0,0 +1,132 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+
+/ {
+ model = "Plymovent M2M board";
+ compatible = "ply,plym2m", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x10000000>;
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ debug0 {
+ label = "debug0";
+ gpios = <&gpio1 8 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>;
+ clock-names = "ipg", "ahb";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* CAN1_SR GPIO output */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
+
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* CAN1_TERM */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0 /* TSC_BUSY */
+
+ /* HW revision detect */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0 /* REV_ID4 */
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ pinctrl_ipu1_disp: ipudisp1grp {
+ fsl,pins = <
+ /* DSE 0x30 => 25 Ohm, 0x20 => 37 Ohm, 0x10 => 75 Ohm */
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0x30
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0x30
+ MX6QDL_PAD_DI0_PIN2__IPU1_DI0_PIN02 0x30
+ MX6QDL_PAD_DI0_PIN3__IPU1_DI0_PIN03 0x30
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0x30
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0x30
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0x30
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0x30
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0x30
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0x30
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0x30
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0x30
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0x30
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0x30
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0x30
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0x30
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0x30
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0x30
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0x30
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0x30
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0x30
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0x30
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_backlight_m2m: backlightm2mgrp {
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6dl-prtmvt.dts b/arch/arm/dts/imx6dl-prtmvt.dts
new file mode 100644
index 0000000000..05fce7178f
--- /dev/null
+++ b/arch/arm/dts/imx6dl-prtmvt.dts
@@ -0,0 +1,164 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Protonic MVT board";
+ compatible = "prt,prtmvt", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@20 {
+ label = "GPIO Key F1";
+ linux,code = <59>;
+ gpios = <&pca_gpio 0 GPIO_ACTIVE_LOW>;
+ };
+ button@21 {
+ label = "GPIO Key F2";
+ linux,code = <60>;
+ gpios = <&pca_gpio 1 GPIO_ACTIVE_LOW>;
+ };
+ button@22 {
+ label = "GPIO Key F3";
+ linux,code = <61>;
+ gpios = <&pca_gpio 2 GPIO_ACTIVE_LOW>;
+ };
+ button@23 {
+ label = "GPIO Key F4";
+ linux,code = <62>;
+ gpios = <&pca_gpio 3 GPIO_ACTIVE_LOW>;
+ };
+ button@24 {
+ label = "GPIO Key F5";
+ linux,code = <63>;
+ gpios = <&pca_gpio 4 GPIO_ACTIVE_LOW>;
+ };
+
+ // Center
+ button@25 {
+ label = "GPIO Key CYCLE";
+ linux,code = <154>;
+ gpios = <&pca_gpio 5 GPIO_ACTIVE_LOW>;
+ };
+ button@26 {
+ label = "GPIO Key ESC";
+ linux,code = <1>;
+ gpios = <&pca_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ button@27 {
+ label = "GPIO Key UP";
+ linux,code = <103>;
+ gpios = <&pca_gpio 7 GPIO_ACTIVE_LOW>;
+ };
+ button@28 {
+ label = "GPIO Key DOWN";
+ linux,code = <108>;
+ gpios = <&pca_gpio 8 GPIO_ACTIVE_LOW>;
+ };
+ button@29 {
+ label = "GPIO Key OK";
+ linux,code = <0x160>;
+ gpios = <&pca_gpio 9 GPIO_ACTIVE_LOW>;
+ };
+
+ button@2a {
+ label = "GPIO Key F6";
+ linux,code = <64>;
+ gpios = <&pca_gpio 10 GPIO_ACTIVE_LOW>;
+ };
+ button@2b {
+ label = "GPIO Key F7";
+ linux,code = <65>;
+ gpios = <&pca_gpio 11 GPIO_ACTIVE_LOW>;
+ };
+ button@2c {
+ label = "GPIO Key F8";
+ linux,code = <66>;
+ gpios = <&pca_gpio 12 GPIO_ACTIVE_LOW>;
+ };
+ button@2d {
+ label = "GPIO Key F9";
+ linux,code = <67>;
+ gpios = <&pca_gpio 13 GPIO_ACTIVE_LOW>;
+ };
+ button@2e {
+ label = "GPIO Key F10";
+ linux,code = <68>;
+ gpios = <&pca_gpio 14 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>;
+ clock-names = "ipg", "ahb";
+ status = "okay";
+};
+
+&pwm2 {
+ status = "disabled";
+};
+
+&pcie {
+ status = "disabled";
+};
+
+&i2c1 {
+ pca_gpio: gpio@74 {
+ #gpio-cells = <2>;
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pca9539>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 IRQ_TYPE_LEVEL_LOW>;
+ gpio-controller;
+ };
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_pca9539: pca9539 {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6dl-prtrvt.dts b/arch/arm/dts/imx6dl-prtrvt.dts
new file mode 100644
index 0000000000..802bd50ae6
--- /dev/null
+++ b/arch/arm/dts/imx6dl-prtrvt.dts
@@ -0,0 +1,182 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Protonic RVT board";
+ compatible = "prt,prtrvt", "fsl,imx6dl";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x10000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-debug0 {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&can1 {
+ pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+
+ nfc@0 {
+ compatible = "ti,trf7970a";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_nfc>;
+ spi-max-frequency = <2000000>;
+ interrupts-extended = <&gpio5 14 IRQ_TYPE_LEVEL_LOW>;
+ ti,enable-gpios = <&gpio5 12 GPIO_ACTIVE_LOW>,
+ <&gpio5 11 GPIO_ACTIVE_LOW>;
+ vin-supply = <®_3v3>;
+ vin-voltage-override = <3100000>;
+ autosuspend-delay = <30000>;
+ irq-status-read-quirk;
+ en2-rf-quirk;
+ t5t-rmb-extra-byte-quirk;
+ status = "okay";
+ };
+};
+
+&i2c3 {
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* nc */
+ channel@4 {
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ /* nc */
+ channel@5 {
+ reg = <5>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ /* can1_l */
+ channel@6 {
+ reg = <6>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ /* can1_h */
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+ };
+
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&usbh1 {
+ status = "disabled";
+};
+
+&vpu {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_can1phy: can1phy {
+ fsl,pins = <
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
+ /* CAN1_TERM */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ /* CS */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ >;
+ };
+
+ pinctrl_nfc: nfcgrp {
+ fsl,pins = <
+ /* NFC_ASK_OOK */
+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x100b1
+ /* NFC_PWR_EN */
+ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x100b1
+ /* NFC_EN2 */
+ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x100b1
+ /* NFC_EN */
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
+ /* NFC_MOD */
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x100b1
+ /* NFC_IRQ */
+ MX6QDL_PAD_DISP0_DAT20__GPIO5_IO14 0x100b1
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6dl-prtvt7.dts b/arch/arm/dts/imx6dl-prtvt7.dts
new file mode 100644
index 0000000000..c202e6786d
--- /dev/null
+++ b/arch/arm/dts/imx6dl-prtvt7.dts
@@ -0,0 +1,472 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ model = "Protonic VT7";
+ compatible = "prt,prtvt7", "fsl,imx6dl";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 500000>;
+ brightness-levels = <0 20 81 248 1000>;
+ default-brightness-level = <20>;
+ num-interpolated-steps = <21>;
+ power-supply = <®_12v_bl>;
+ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ display {
+ compatible = "fsl,imx-parallel-display";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_disp>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interface-pix-fmt = "rgb24";
+ status = "okay";
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu1_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ esc {
+ label = "GPIO Key ESC";
+ linux,code = <KEY_ESC>;
+ gpios = <&gpio_pca 0 GPIO_ACTIVE_LOW>;
+ };
+
+ up {
+ label = "GPIO Key UP";
+ linux,code = <KEY_UP>;
+ gpios = <&gpio_pca 1 GPIO_ACTIVE_LOW>;
+ };
+
+ down {
+ label = "GPIO Key DOWN";
+ linux,code = <KEY_DOWN>;
+ gpios = <&gpio_pca 4 GPIO_ACTIVE_LOW>;
+ };
+
+ enter {
+ label = "GPIO Key Enter";
+ linux,code = <KEY_ENTER>;
+ gpios = <&gpio_pca 3 GPIO_ACTIVE_LOW>;
+ };
+
+ cycle {
+ label = "GPIO Key CYCLE";
+ linux,code = <KEY_CYCLEWINDOWS>;
+ gpios = <&gpio_pca 2 GPIO_ACTIVE_LOW>;
+ };
+
+ f1 {
+ label = "GPIO Key F1";
+ linux,code = <KEY_F1>;
+ gpios = <&gpio_pca 14 GPIO_ACTIVE_LOW>;
+ };
+
+ f2 {
+ label = "GPIO Key F2";
+ linux,code = <KEY_F2>;
+ gpios = <&gpio_pca 13 GPIO_ACTIVE_LOW>;
+ };
+
+ f3 {
+ label = "GPIO Key F3";
+ linux,code = <KEY_F3>;
+ gpios = <&gpio_pca 12 GPIO_ACTIVE_LOW>;
+ };
+
+ f4 {
+ label = "GPIO Key F4";
+ linux,code = <KEY_F4>;
+ gpios = <&gpio_pca 11 GPIO_ACTIVE_LOW>;
+ };
+
+ f5 {
+ label = "GPIO Key F5";
+ linux,code = <KEY_F5>;
+ gpios = <&gpio_pca 10 GPIO_ACTIVE_LOW>;
+ };
+
+ f6 {
+ label = "GPIO Key F6";
+ linux,code = <KEY_F6>;
+ gpios = <&gpio_pca 5 GPIO_ACTIVE_LOW>;
+ };
+
+ f7 {
+ label = "GPIO Key F7";
+ linux,code = <KEY_F7>;
+ gpios = <&gpio_pca 6 GPIO_ACTIVE_LOW>;
+ };
+
+ f8 {
+ label = "GPIO Key F8";
+ linux,code = <KEY_F8>;
+ gpios = <&gpio_pca 7 GPIO_ACTIVE_LOW>;
+ };
+
+ f9 {
+ label = "GPIO Key F9";
+ linux,code = <KEY_F9>;
+ gpios = <&gpio_pca 8 GPIO_ACTIVE_LOW>;
+ };
+
+ f10 {
+ label = "GPIO Key F10";
+ linux,code = <KEY_F10>;
+ gpios = <&gpio_pca 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-debug0 {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ panel {
+ compatible = "innolux,g070y2t0ec";
+ backlight = <&backlight_lcd>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+ };
+
+ reg_12v_bl: regulator-bl-12v {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_12v_bl>;
+ regulator-name = "12v-bl";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "prti6q-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "External Speaker", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ system-clock-frequency = <0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ bitclock-master;
+ frame-master;
+ };
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+
+ tsc@0 {
+ compatible = "ti,tsc2046";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_tsc>;
+ spi-max-frequency = <100000>;
+ interrupts-extended = <&gpio3 20 IRQ_TYPE_EDGE_FALLING>;
+ pendown-gpio = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ vcc-supply = <®_3v3>;
+
+ ti,vref-delay-usecs = /bits/ 16 <100>;
+
+ ti,x-min = /bits/ 16 <0>;
+ ti,x-max = /bits/ 16 <8000>;
+ ti,y-min = /bits/ 16 <0>;
+ ti,y-max = /bits/ 16 <4800>;
+ ti,x-plate-ohms = /bits/ 16 <800>;
+ ti,y-plate-ohms = /bits/ 16 <300>;
+ ti,pressure-max = /bits/ 16 <4095>;
+
+ ti,skip-samples = <2>;
+ ti,sample-period-msecs = <10>;
+ ti,report-period-msecs = <30>;
+
+ ti,filter-tolerance = <80>;
+ ti,touch-resistance-threshold = <3500>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ mux_ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN 0
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TFSDIR 0
+ IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ mux_pins3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ 0 IMX_AUDMUX_V2_PDCR_TXRXEN
+ >;
+ };
+};
+
+&can1 {
+ pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&i2c1 {
+ sgtl5000: codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_codec>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_3v3>;
+ VDDIO-supply = <®_3v3>;
+ VDDD-supply = <®_1v8>;
+ };
+};
+
+&i2c3 {
+ rtc@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ gpio_pca: gpio@74 {
+ compatible = "nxp,pca9539";
+ reg = <0x74>;
+ interrupts-extended = <&gpio4 5 IRQ_TYPE_LEVEL_LOW>;
+ #gpio-cells = <2>;
+ gpio-controller;
+ };
+};
+
+&ipu1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ipu1_csi0>;
+ status = "okay";
+};
+
+&ipu1_di0_disp0 {
+ remote-endpoint = <&display_in>;
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&ssi1 {
+ #sound-dai-cells = <0>;
+ fsl,mode = "i2s-slave";
+ status = "okay";
+};
+
+&usbh1 {
+ status = "disabled";
+};
+
+&vpu {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_can1phy: can1phy {
+ fsl,pins = <
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
+ /* CAN1_TERM */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+ >;
+ };
+
+ pinctrl_codec: codecgrp {
+ fsl,pins = <
+ /* AUDIO_nRESET */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+ >;
+ };
+
+ pinctrl_ipu1_csi0: ipu1csi0grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
+ MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
+ /* ITU656_nRESET */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ /* ITU656_nPDN */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
+ >;
+ };
+
+ pinctrl_ipu1_disp: ipudisp1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK 0xb0
+ MX6QDL_PAD_DI0_PIN15__IPU1_DI0_PIN15 0xb0
+
+ MX6QDL_PAD_DISP0_DAT0__IPU1_DISP0_DATA00 0xb0
+ MX6QDL_PAD_DISP0_DAT1__IPU1_DISP0_DATA01 0xb0
+ MX6QDL_PAD_DISP0_DAT2__IPU1_DISP0_DATA02 0xb0
+ MX6QDL_PAD_DISP0_DAT3__IPU1_DISP0_DATA03 0xb0
+ MX6QDL_PAD_DISP0_DAT4__IPU1_DISP0_DATA04 0xb0
+ MX6QDL_PAD_DISP0_DAT5__IPU1_DISP0_DATA05 0xb0
+ MX6QDL_PAD_DISP0_DAT6__IPU1_DISP0_DATA06 0xb0
+ MX6QDL_PAD_DISP0_DAT7__IPU1_DISP0_DATA07 0xb0
+
+ MX6QDL_PAD_DISP0_DAT8__IPU1_DISP0_DATA08 0xb0
+ MX6QDL_PAD_DISP0_DAT9__IPU1_DISP0_DATA09 0xb0
+ MX6QDL_PAD_DISP0_DAT10__IPU1_DISP0_DATA10 0xb0
+ MX6QDL_PAD_DISP0_DAT11__IPU1_DISP0_DATA11 0xb0
+ MX6QDL_PAD_DISP0_DAT12__IPU1_DISP0_DATA12 0xb0
+ MX6QDL_PAD_DISP0_DAT13__IPU1_DISP0_DATA13 0xb0
+ MX6QDL_PAD_DISP0_DAT14__IPU1_DISP0_DATA14 0xb0
+ MX6QDL_PAD_DISP0_DAT15__IPU1_DISP0_DATA15 0xb0
+
+ MX6QDL_PAD_DISP0_DAT16__IPU1_DISP0_DATA16 0xb0
+ MX6QDL_PAD_DISP0_DAT17__IPU1_DISP0_DATA17 0xb0
+ MX6QDL_PAD_DISP0_DAT18__IPU1_DISP0_DATA18 0xb0
+ MX6QDL_PAD_DISP0_DAT19__IPU1_DISP0_DATA19 0xb0
+ MX6QDL_PAD_DISP0_DAT20__IPU1_DISP0_DATA20 0xb0
+ MX6QDL_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 0xb0
+ MX6QDL_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 0xb0
+ MX6QDL_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 0xb0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_9__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_reg_12v_bl: 12blgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
+ >;
+ };
+
+ pinctrl_tsc: tscgrp {
+
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b0
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6dl-victgo.dts b/arch/arm/dts/imx6dl-victgo.dts
new file mode 100644
index 0000000000..55bc4c8d41
--- /dev/null
+++ b/arch/arm/dts/imx6dl-victgo.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2016 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Kverneland Tellus GO";
+ compatible = "kvg,victgo", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x20000000>;
+ };
+
+ rotary-encoder {
+ compatible = "rotary-encoder";
+ pinctrl-0 = <&pinctrl_rotary_ch>;
+ gpios = <&gpio2 3 0>, <&gpio2 4 0>;
+ linux,axis = <8>; /* REL_WHEEL */
+ rotary-encoder,steps-per-period = <4>;
+ rotary-encoder,relative-axis;
+ rotary-encoder,rollover;
+ wakeup-source;
+ };
+
+ rotary-button {
+ compatible = "gpio-keys";
+ pinctrl-0 = <&pinctrl_rotary_btn>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+ button@0 {
+ label = "Rotary Key";
+ gpios = <&gpio2 05 1>;
+ linux,code = <KEY_ENTER>;
+ gpio-key,wakeup;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ phy-reset-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>;
+ clock-names = "ipg", "ahb";
+ status = "okay";
+};
+
+&uart2 {
+ status = "disabled";
+};
+
+&i2c1 {
+ ht16k33: ht16k33@70 {
+ compatible = "holtek,ht16k33";
+ pinctrl-0 = <&pinctrl_ht16k33>;
+ reg = <0x70>;
+ refresh-rate-hz = <20>;
+ debounce-delay-ms = <50>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <5 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+ keypad,num-rows = <12>;
+ keypad,num-columns = <3>;
+ linux,keymap = <
+ MATRIX_KEY(2, 0, KEY_F6)
+ MATRIX_KEY(3, 0, KEY_F8)
+ MATRIX_KEY(4, 0, KEY_F10)
+ MATRIX_KEY(5, 0, KEY_F4)
+ MATRIX_KEY(6, 0, KEY_F2)
+ MATRIX_KEY(2, 1, KEY_F5)
+ MATRIX_KEY(3, 1, KEY_F7)
+ MATRIX_KEY(4, 1, KEY_F9)
+ MATRIX_KEY(5, 1, KEY_F3)
+ MATRIX_KEY(6, 1, KEY_F1)
+ >;
+ };
+};
+
+&pwm2 {
+ status = "disabled";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_DISP0_DAT9__GPIO4_IO30 0x1b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT16__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT17__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
+ MX6QDL_PAD_DISP0_DAT19__ECSPI2_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_rotary_ch: rotarygrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x1b0b0 /* ROTARY_A */
+ MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x1b0b0 /* ROTARY_B */
+ >;
+ };
+
+ pinctrl_rotary_btn: rotarygrp {
+ fsl,pins = <
+ MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x1b0b0 /* ROTARY_BTN */
+ >;
+ };
+
+ pinctrl_ht16k33: ht16k33grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x1b0b0 /* IRQ */
+ >;
+ };
+
+ pinctrl_tsc2046e: tsc2046egrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x1b0b0
+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6dl-vicut1.dts b/arch/arm/dts/imx6dl-vicut1.dts
new file mode 100644
index 0000000000..725acbefc5
--- /dev/null
+++ b/arch/arm/dts/imx6dl-vicut1.dts
@@ -0,0 +1,51 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6dl.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Kverneland UT1 Board";
+ compatible = "kvg,vicut1", "fsl,imx6dl";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+
+ /* Phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6q-prti6q.dts b/arch/arm/dts/imx6q-prti6q.dts
new file mode 100644
index 0000000000..f0469d5f62
--- /dev/null
+++ b/arch/arm/dts/imx6q-prti6q.dts
@@ -0,0 +1,554 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6q.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/sound/fsl-imx-audmux.h>
+
+/ {
+ model = "Protonic PRTI6Q board";
+ compatible = "prt,prti6q", "fsl,imx6q";
+
+ chosen {
+ environment {
+ compatible = "barebox,environment";
+ device-path = &ecspi1, "partname:env";
+ };
+ };
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0xf0000000>;
+ };
+
+ backlight_lcd: backlight-lcd {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight>;
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 16 64 255>;
+ num-interpolated-steps = <16>;
+ default-brightness-level = <16>;
+ power-supply = <®_3v3>;
+ enable-gpios = <&gpio4 28 GPIO_ACTIVE_HIGH>;
+ };
+
+ can3_25m_osc: can3-25m-osc {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ led-debug0 {
+ function = LED_FUNCTION_STATUS;
+ gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led-debug1 {
+ function = LED_FUNCTION_SD;
+ gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "disk-activity";
+ };
+ };
+
+ panel {
+ compatible = "kyo,tcg121xglp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ };
+
+ reg_wifi: regulator-wifi {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_npd>;
+ enable-active-high;
+ gpio = <&gpio1 26 GPIO_ACTIVE_HIGH>;
+ regulator-max-microvolt = <1800000>;
+ regulator-min-microvolt = <1800000>;
+ regulator-name = "regulator-WL12xx";
+ startup-delay-us = <70000>;
+ };
+
+ sound {
+ compatible = "simple-audio-card";
+ simple-audio-card,name = "prti6q-sgtl5000";
+ simple-audio-card,format = "i2s";
+ simple-audio-card,widgets =
+ "Microphone", "Microphone Jack",
+ "Line", "Line In Jack",
+ "Headphone", "Headphone Jack",
+ "Speaker", "External Speaker";
+ simple-audio-card,routing =
+ "MIC_IN", "Microphone Jack",
+ "LINE_IN", "Line In Jack",
+ "Headphone Jack", "HP_OUT",
+ "External Speaker", "LINE_OUT";
+
+ simple-audio-card,cpu {
+ sound-dai = <&ssi1>;
+ system-clock-frequency = <0>;
+ };
+
+ simple-audio-card,codec {
+ sound-dai = <&sgtl5000>;
+ bitclock-master;
+ frame-master;
+ };
+ };
+
+ sound-spdif {
+ compatible = "fsl,imx-audio-spdif";
+ model = "imx-spdif";
+ spdif-controller = <&spdif>;
+ spdif-in;
+ spdif-out;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux>;
+ status = "okay";
+
+ mux_ssi1 {
+ fsl,audmux-port = <0>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN 0
+ IMX_AUDMUX_V2_PTCR_TFSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TCSEL(2) 0
+ IMX_AUDMUX_V2_PTCR_TFSDIR 0
+ IMX_AUDMUX_V2_PTCR_TCLKDIR IMX_AUDMUX_V2_PDCR_RXDSEL(2)
+ >;
+ };
+
+ mux_pins3 {
+ fsl,audmux-port = <2>;
+ fsl,port-config = <
+ IMX_AUDMUX_V2_PTCR_SYN IMX_AUDMUX_V2_PDCR_RXDSEL(0)
+ 0 IMX_AUDMUX_V2_PDCR_TXRXEN
+ >;
+ };
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can2>;
+ status = "okay";
+};
+
+&ecspi1 {
+ cs-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash@0 {
+ compatible = "jedec,spi-nor";
+ reg = <0>;
+ spi-max-frequency = <20000000>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x100000>;
+ };
+
+ partition@100000 {
+ label = "env";
+ reg = <0x100000 0x10000>;
+ };
+
+ partition@110000 {
+ label = "spare";
+ reg = <0x110000 0x2f0000>;
+ };
+ };
+};
+
+&ecspi2 {
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>, <&gpio4 25 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2 &pinctrl_ecspi2_cs>;
+ status = "okay";
+
+ can@0 {
+ compatible = "microchip,mcp2515";
+ reg = <0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can3>;
+ clocks = <&can3_25m_osc>;
+ interrupts-extended = <&gpio3 20 IRQ_TYPE_LEVEL_LOW>;
+ spi-max-frequency = <5000000>;
+ };
+
+ adc@1 {
+ compatible = "ti,adc128s052";
+ reg = <1>;
+ spi-max-frequency = <2000000>;
+ vref-supply = <®_3v3>;
+ };
+};
+
+&ecspi3 {
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii-id";
+ phy-handle = <&rgmii_phy>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* Microchip KSZ9031RNX PHY */
+ rgmii_phy: ethernet-phy@0 {
+ reg = <0>;
+ interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <300>;
+ };
+ };
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ sgtl5000: audio-codec@a {
+ compatible = "fsl,sgtl5000";
+ reg = <0xa>;
+ #sound-dai-cells = <0>;
+ clocks = <&clks 201>;
+ VDDA-supply = <®_3v3>;
+ VDDIO-supply = <®_3v3>;
+ VDDD-supply = <®_1v8>;
+ };
+};
+
+/* DDC */
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+};
+
+&i2c3 {
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* can2_l */
+ channel@4 {
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ /* can2_h */
+ channel@5 {
+ reg = <5>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ /* can1_l */
+ channel@6 {
+ reg = <6>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ /* can1_h */
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+ };
+};
+
+&pcie {
+ status = "okay";
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+};
+
+&sata {
+ status = "okay";
+};
+
+&snvs_poweroff {
+ status = "okay";
+};
+
+&spdif {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_spdif>;
+ status = "okay";
+};
+
+&ssi1 {
+ #sound-dai-cells = <0>;
+ fsl,mode = "ac97-slave";
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart5 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart5>;
+ status = "okay";
+};
+
+&usbotg {
+ pinctrl-0 = <&pinctrl_usbotg &pinctrl_usbotg_id>;
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ vmmc-supply = <®_wifi>;
+ cap-power-off-card;
+ keep-power-in-suspend;
+ status = "okay";
+
+ wifi {
+ compatible = "ti,wl1271";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi>;
+ interrupts-extended = <&gpio1 30 IRQ_TYPE_LEVEL_HIGH>;
+ ref-clock-frequency = "38400000";
+ tcxo-clock-frequency = "19200000";
+ };
+};
+
+&iomuxc {
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight: backlightgrp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT7__GPIO4_IO28 0x1b0b0
+ >;
+ };
+
+ pinctrl_can2: can2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL4__FLEXCAN2_TX 0x80000000
+ MX6QDL_PAD_KEY_ROW4__FLEXCAN2_RX 0x80000000
+ >;
+ };
+
+ pinctrl_can3: can3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x1b0b1
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
+ MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
+ MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
+ /* CS */
+ MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x000b1
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+ >;
+ };
+
+ pinctrl_ecspi2_cs: ecspi2csgrp {
+ fsl,pins = <
+ /* ADC128S022 CS */
+ MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1
+ >;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+
+ /* Phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
+ >;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <
+ /* NOTE: DDC is done via I2C2, so DON'T
+ * configure DDC pins for HDMI!
+ */
+ MX6QDL_PAD_EIM_A25__HDMI_TX_CEC_LINE 0x1f8b0
+ >;
+ };
+
+ /* DDC */
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_spdif: spdifgrp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_16__SPDIF_IN 0x1b0b0
+ MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D28__UART2_DTE_CTS_B 0x1b0b1
+ MX6QDL_PAD_EIM_D29__UART2_DTE_RTS_B 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart5: uart5grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg_id: usbotgidgrp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x1f058
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_wifi: wifigrp {
+ fsl,pins = <
+ /* WL12xx IRQ */
+ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x10880
+ >;
+ };
+
+ pinctrl_wifi_npd: wifinpd {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b8b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6q-prtwd2.dts b/arch/arm/dts/imx6q-prtwd2.dts
new file mode 100644
index 0000000000..8572917865
--- /dev/null
+++ b/arch/arm/dts/imx6q-prtwd2.dts
@@ -0,0 +1,188 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2018 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6q.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/leds/common.h>
+
+/ {
+ model = "Protonic WD2 board";
+ compatible = "prt,prtwd2", "fsl,imx6q";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_npd>;
+ reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+ };
+
+ /* PRTWD2 rev 1 bitbang I2C for Ethernet Switch */
+ i2c@4 {
+ compatible = "i2c-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ sda-gpios = <&gpio1 22 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN)>;
+ scl-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+ i2c-gpio,delay-us = <20>; /* ~10 kHz */
+ i2c-gpio,scl-output-only;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ };
+};
+
+&can1 {
+ pinctrl-0 = <&pinctrl_can1 &pinctrl_can1phy>;
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rmii";
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>;
+ clock-names = "ipg", "ahb";
+ status = "okay";
+
+ fixed-link {
+ speed = <100>;
+ pause;
+ full-duplex;
+ };
+};
+
+&i2c3 {
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* V in */
+ channel@4 {
+ reg = <4>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+
+ /* I charge */
+ channel@5 {
+ reg = <5>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+
+ /* V bus */
+ channel@6 {
+ reg = <6>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+
+ /* nc */
+ channel@7 {
+ reg = <7>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ non-removable;
+ no-1-8-v;
+ non-removable;
+ mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+ pm-ignore-notify;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "okay";
+
+ wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ };
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usb_eth_chg>;
+
+ pinctrl_can1phy: can1phy {
+ fsl,pins = <
+ /* CAN1_SR */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
+ >;
+ };
+
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP4 */
+ MX6QDL_PAD_ENET_RXD0__ENET_RX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_RXD1__ENET_RX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_RX_ER__ENET_RX_ER 0x130b0
+ MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
+ MX6QDL_PAD_ENET_TXD0__ENET_TX_DATA0 0x1b0b0
+ MX6QDL_PAD_ENET_TXD1__ENET_TX_DATA1 0x1b0b0
+ MX6QDL_PAD_ENET_CRS_DV__ENET_RX_EN 0x1b0b0
+
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x1b0b0
+ /* Phy reset */
+ MX6QDL_PAD_CSI0_DAT4__GPIO5_IO22 0x1b0b0
+ /* nINTRP */
+ MX6QDL_PAD_CSI0_DAT5__GPIO5_IO23 0x1b0b0
+
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+ >;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__GPIO1_IO22 0x1f8b0
+ MX6QDL_PAD_ENET_MDC__GPIO1_IO31 0x1f8b0
+ >;
+ };
+
+ pinctrl_usb_eth_chg: usbethchggrp {
+ fsl,pins = <
+ /* USB charging control */
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x130b0
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x130b0
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x130b0
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x130b0
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_wifi_npd: wifinpd {
+ fsl,pins = <
+ /* WL_REG_ON */
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6q-vicut1.dts b/arch/arm/dts/imx6q-vicut1.dts
new file mode 100644
index 0000000000..9f60ed1ac2
--- /dev/null
+++ b/arch/arm/dts/imx6q-vicut1.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6q.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Kverneland UT1Q Board";
+ compatible = "kvg,vicut1q", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0xf0000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ /* phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; */
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+
+ /* Phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-prti6q.dtsi b/arch/arm/dts/imx6qdl-prti6q.dtsi
new file mode 100644
index 0000000000..ed526d185f
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-prti6q.dtsi
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ reg_1v8: regulator-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "1v8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ reg_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "3v3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_usb_h1_vbus: regulator-h1-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "h1-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ regulator-always-on;
+ };
+
+ reg_usb_otg_vbus: regulator-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "otg-vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+};
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_can1>;
+ status = "okay";
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+};
+
+&i2c3 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3>;
+ status = "okay";
+
+ temperature-sensor@70 {
+ compatible = "ti,tmp103";
+ reg = <0x70>;
+ };
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_usb_h1_vbus>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg>;
+ phy_type = "utmi";
+ dr_mode = "host";
+ disable-over-current;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio1 1 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_can1: can1grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x80000000
+ MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x80000000
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001f8b1
+ MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001f8b1
+ >;
+ };
+
+ pinctrl_i2c3: i2c3grp {
+ fsl,pins = <
+ MX6QDL_PAD_GPIO_5__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_CMD__SD1_CMD 0x170f9
+ MX6QDL_PAD_SD1_CLK__SD1_CLK 0x100f9
+ MX6QDL_PAD_SD1_DAT0__SD1_DATA0 0x170f9
+ MX6QDL_PAD_SD1_DAT1__SD1_DATA1 0x170f9
+ MX6QDL_PAD_SD1_DAT2__SD1_DATA2 0x170f9
+ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x170f9
+ MX6QDL_PAD_GPIO_1__GPIO1_IO01 0x1b0b0
+ >;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17099
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10099
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17099
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17099
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17099
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17099
+ MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17099
+ MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17099
+ MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17099
+ MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17099
+ MX6QDL_PAD_SD3_RST__SD3_RESET 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6qdl-vicut1.dtsi b/arch/arm/dts/imx6qdl-vicut1.dtsi
new file mode 100644
index 0000000000..dc18614f89
--- /dev/null
+++ b/arch/arm/dts/imx6qdl-vicut1.dtsi
@@ -0,0 +1,208 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+#include "imx6qdl-prti6q.dtsi"
+#include <dt-bindings/input/input.h>
+
+/ {
+ gpio_key_pwr: gpio_keys {
+ compatible = "gpio-keys";
+ autorepeat;
+
+ power {
+ label = "GPIO Key Power";
+ gpios = <&gpio2 23 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ gpio-key,wakeup;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ debug0 {
+ label = "debug0";
+ gpios = <&gpio1 8 0>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ debug1 {
+ label = "debug1";
+ gpios = <&gpio1 9 0>;
+ linux,default-trigger = "mmc";
+ };
+
+ power_led {
+ label = "power_led";
+ gpios = <&gpio2 24 0>;
+ default-state = "on";
+ };
+
+ isb_led {
+ label = "isb_led";
+ gpios = <&gpio4 31 0>;
+ default-state = "off";
+ };
+ };
+};
+
+&clks {
+ assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_PLL5_VIDEO_DIV>;
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&i2c3 {
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+};
+
+&iomuxc {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
+ /* CAN1_SR + CAN2_SR GPIO outputs */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070
+ /* CAN1_TERM */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+ /* ITU656_nRESET */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b0
+ /* CAM1_MIRROR */
+ MX6QDL_PAD_GPIO_3__GPIO1_IO03 0x130b0
+ /* CAM2_MIRROR */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x130b0
+ /* CAM_nDETECT */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b0
+ /* nON_SWITCH */
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b0
+ /* ISB_IN1 */
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x130b0
+ /* ISB_nIN2 */
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b0
+ /* WARN_LIGHT */
+ MX6QDL_PAD_EIM_A19__GPIO2_IO19 0x100b0
+ /* ON2_FB */
+ MX6QDL_PAD_EIM_A25__GPIO5_IO02 0x100b0
+ /* YACO_nIRQ */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b0
+ /* YACO_BOOT0 */
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b0
+ /* YACO_nRESET */
+ MX6QDL_PAD_EIM_D31__GPIO3_IO31 0x1b0b0
+ /* FORCE_ON1 */
+ MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x1b0b0
+ /* AUDIO_nRESET */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1f0b0
+ /* ITU656_nPDN */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
+
+ /* HW revision detect */
+ /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ /* REV_ID1 = PWM output LED_PWM (SION) */
+ /* defined in &pinctrl_pwm3 */
+ /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+ /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ /* REV_ID4 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+
+ /* New in HW revision 1 */
+ MX6QDL_PAD_EIM_D20__GPIO3_IO20 0x100b0 /* ON1_FB */
+ MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x1b0b0 /* DIP1_FB */
+
+ /* New in UTC (UT1 HW revision 1) and TGO */
+ /* WHEEL */
+ MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x100b0
+ /* RADAR */
+ MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x100b0
+ /* PTO */
+ MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x100b0
+ /* CPU_ON1_CTRL */
+ MX6QDL_PAD_DISP0_DAT0__GPIO4_IO21 0x1b0b0
+ /* CPU_ON2_CTRL */
+ MX6QDL_PAD_DISP0_DAT1__GPIO4_IO22 0x1b0b0
+ /* CPU_HITCH_IN_OUT */
+ MX6QDL_PAD_DISP0_DAT2__GPIO4_IO23 0x100b0
+ /* CPU_LIGHT_ON */
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x100b0
+ /* CPU_CONTACT_IN */
+ MX6QDL_PAD_DISP0_DAT6__GPIO4_IO27 0x100b0
+ >;
+ };
+
+ pinctrl_usbotg: usbotggrp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__USB_OTG_OC 0x1b0b0
+ /* power enable, high active */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0
+ >;
+ };
+
+ /* YaCO AUX Uart */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1
+ >;
+ };
+
+ /* YaCO Touchscreen UART */
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ /* DEBUG0A */
+ MX6QDL_PAD_DI0_DISP_CLK__GPIO4_IO16 0x1b0b0
+ /* DEBUG1A */
+ MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x1b0b0
+ /* DEBUG0 */
+ MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0
+ /* DEBUG1 */
+ MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x1b0b0
+ /* POWER_LED */
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b0
+ /* ISB_LED */
+ MX6QDL_PAD_DISP0_DAT10__GPIO4_IO31 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ /* ISB LED (not in TGO or UTC version 1+) */
+ MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <
+ /* REV_ID1 = PWM output LED_PWM (SION for ID) */
+ MX6QDL_PAD_SD4_DAT1__PWM3_OUT 0x4001b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6qp-prtwd3.dts b/arch/arm/dts/imx6qp-prtwd3.dts
new file mode 100644
index 0000000000..0ef0bae036
--- /dev/null
+++ b/arch/arm/dts/imx6qp-prtwd3.dts
@@ -0,0 +1,675 @@
+/*
+ * Copyright (c) 2018 Protonic Holland
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 or later at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include <arm/imx6qp.dtsi>
+#include "imx6qdl-prti6q.dtsi"
+
+/ {
+ model = "Protonic WD3 board";
+ compatible = "prt,prtwd3", "fsl,imx6qp";
+
+ memory@10000000 {
+ device_type = "memory";
+ reg = <0x10000000 0x20000000>;
+ };
+
+ memory@80000000 {
+ device_type = "memory";
+ reg = <0x80000000 0x20000000>;
+ };
+
+ aliases {
+ mdio-gpio0 = &mdio0;
+ };
+
+ usdhc2_wifi_pwrseq: usdhc2_wifi_pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wifi_npd>;
+ reset-gpios = <&gpio6 10 GPIO_ACTIVE_LOW>;
+ };
+
+ clk20m_can: fdcan_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <20000000>;
+ };
+
+ clk25m_switch: switch_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clk25m_phy3: phy3_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <25000000>;
+ };
+
+ clk50m_phy: phy_clock {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <50000000>;
+ };
+
+ mdio0: mdio {
+ compatible = "virtual,mdio-gpio";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_mdio0>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+ gpios = <&gpio5 6 GPIO_ACTIVE_HIGH
+ &gpio5 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ display_panel0 {
+ compatible = "kyo,tcg121xglp";
+ backlight = <&backlight_lcd>;
+
+ port {
+ display_panel0_in: endpoint {
+ remote-endpoint = <&serializer0_out>;
+ };
+ };
+ };
+
+ display_panel1 {
+ compatible = "kyo,tcg121xglp";
+ backlight = <&backlight_panel1>;
+
+ port {
+ display_panel1_in: endpoint {
+ remote-endpoint = <&serializer1_out>;
+ };
+ };
+ };
+
+ backlight_lcd: backlight_lcd {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 5000000>;
+ brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>;
+ default-brightness-level = <15>;
+ power-supply = <®_3v3>;
+ };
+
+ backlight_panel1: backlight_panel1 {
+ compatible = "pwm-backlight";
+ pwms = <&pwm2 0 5000000>;
+ brightness-levels = <0 1 2 4 6 8 12 16 24 32 48 64 96 128 192 255>;
+ default-brightness-level = <0>;
+ power-supply = <®_3v3>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ status = "okay";
+
+ clocks = <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET>,
+ <&clks IMX6QDL_CLK_ENET_REF>,
+ <&clks IMX6QDL_CLK_ENET_REF>;
+ clock-names = "ipg", "ahb", "ptp", "enet_clk_ref";
+ assigned-clocks = <&clks IMX6QDL_CLK_ENET_REF>;
+ assigned-clock-rates = <125000000>;
+
+ phy-mode = "rgmii";
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+
+ mdio1: mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ /* Microchip KSZ9031 */
+ rgmii_phy: ethernet-phy@2 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <2>;
+
+ interrupts-extended = <&gpio1 28 IRQ_TYPE_EDGE_FALLING>;
+
+ /* FIXME: tx/rx clk skew are currently set by imx
+ * platform driver. Write own walues here to not depend
+ * fixup of horror.
+ */
+
+ reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
+ /* reset assert time is provided by documentation */
+ reset-assert-us = <10000>;
+ /* documented reset deassert time (100us) is not enough
+ * use test value of 300us.
+ */
+ reset-deassert-us = <1000>;
+
+ clocks = <&clk25m_phy3>;
+ };
+ };
+};
+
+&ecspi2 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ status = "okay";
+ sja1105_switch: sja1105@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "nxp,sja1105q";
+ spi-max-frequency = <4000000>;
+ spi-cpha;
+ spi-rx-delay-us = <1>;
+ spi-tx-delay-us = <1>;
+
+ reset-gpios = <&gpio5 5 GPIO_ACTIVE_LOW>;
+
+ clocks = <&clk25m_switch>;
+ #clock-cells = <1>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ label = "usb";
+ phy-handle = <&usbeth_phy>;
+ phy-mode = "rmii";
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "t1slave";
+ phy-handle = <&tja1102_phy1>;
+ phy-mode = "rmii";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "t1master";
+ phy-handle = <&tja1102_phy0>;
+ phy-mode = "rmii";
+
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "rj45";
+ phy-handle = <&rgmii_phy>;
+ phy-mode = "rgmii-id";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "cpu";
+ ethernet = <&fec>;
+ phy-mode = "rgmii-id";
+
+ fixed-link {
+ speed = <100>;
+ full-duplex;
+ };
+ };
+ };
+ };
+};
+
+&mdio0 {
+ usbeth_phy: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0x3>;
+
+ interrupts-extended = <&gpio5 12 IRQ_TYPE_LEVEL_LOW>;
+ micrel,led-mode = <0>;
+
+ reset-gpios = <&gpio5 11 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500>;
+ reset-deassert-us = <1000>;
+
+ /* FIXME: the clock is provided by switch and we should know
+ * and we should request it only after switch have done clock
+ * configuration. Since it is currently not implemented,
+ * use fixed clock.
+ * WARNING: Using fixed clocks in this case is potential source
+ * for evil bugs. Switch may reconfigure, stop or change clk
+ * freq without letting PHY to know about it.
+ */
+ clocks = <&clk50m_phy>;
+ clock-names = "rmii-ref";
+ };
+
+ tja1102_phy0: ethernet-phy@4 {
+ compatible = "ethernet-phy-id0180.dc80";
+ reg = <0x4>;
+
+ interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+
+ reset-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ /* reset detection time is 20 usec. */
+ reset-assert-us = <20>;
+ /* reset to standby 2 msec. */
+ reset-deassert-us = <2000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ tja1102_phy1: ethernet-phy@5 {
+ reg = <0x5>;
+
+ interrupts-extended = <&gpio5 8 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&ecspi3 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 24 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ status = "okay";
+ can3: can@0 {
+ compatible = "microchip,mcp2518fd";
+ spi-max-frequency = <5000000>;
+ reg = <0>;
+ clocks = <&clk20m_can>;
+ interrupt-parent = <&gpio4>;
+ interrupts = <25 0x2>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ status = "okay";
+
+ serializer0: ds90ub927@c {
+ compatible = "ti,ds90ub927";
+ reg = <0x0c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ serializer0_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+ /* port@1 {
+ reg = <1>;
+ serializer0_audio_in: endpoint {
+ remote-endpoint = <&audio_i2s0_out>;
+ };
+ }; */
+ port@2 {
+ reg = <2>;
+ serializer0_out: endpoint {
+ remote-endpoint = <&display_panel0_in>;
+ };
+ };
+ };
+};
+
+&i2c2 {
+ clock-frequency = <100000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ serializer1: ds90ub927@c {
+ compatible = "ti,ds90ub927";
+ reg = <0x0c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ serializer1_in: endpoint {
+ remote-endpoint = <&lvds1_out>;
+ };
+ };
+ port@2 {
+ reg = <2>;
+ serializer1_out: endpoint {
+ remote-endpoint = <&display_panel1_in>;
+ };
+ };
+ };
+
+ camdeser: ds90ub954@30 {
+ compatible = "ti,ds90ub954";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ port@0 {
+ reg = <0>;
+ camdeser_fpd_link_in: endpoint {
+ };
+ };
+ port@1 {
+ reg = <1>;
+ camdeser_mipi_out: endpoint {
+ remote-endpoint = <&mipi_csi_in>;
+ };
+ };
+ };
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ no-1-8-v; /* force 3.3V VIO */
+ non-removable;
+ mmc-pwrseq = <&usdhc2_wifi_pwrseq>;
+ pm-ignore-notify;
+ status = "okay";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ brcmf: bcrmf@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+&i2c3 {
+ adc@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <1>;
+ ti,datarate = <3>;
+ };
+ };
+};
+
+&ldb {
+ status = "okay";
+
+ lvds-channel@0 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&serializer0_in>;
+ };
+ };
+ };
+
+ lvds-channel@1 {
+ status = "okay";
+
+ port@4 {
+ reg = <4>;
+
+ lvds1_out: endpoint {
+ remote-endpoint = <&serializer1_in>;
+ };
+ };
+ };
+};
+
+&mipi_csi {
+ status = "okay";
+ port@0 {
+ reg = <0>;
+
+ mipi_csi_in: endpoint {
+ remote-endpoint = <&camdeser_mipi_out>;
+ };
+ };
+};
+
+&ipu1_csi0_mux_from_parallel_sensor {
+ /* Empty, to disable parallel camera from PRTI6Q */
+};
+
+&pwm1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm1>;
+ status = "okay";
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+
+ /* Configure clock provider for RGMII ref clock */
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0b0
+ /* Configure clock consumer for RGMII ref clock */
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
+
+ /* SJA1105Q switch reset */
+ MX6QDL_PAD_DISP0_DAT11__GPIO5_IO05 0x10030
+
+ /* phy3/rgmii_phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x10030
+ /* phy3/rgmii_phy int */
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x40010000
+ >;
+ };
+
+ pinctrl_mdio0: mdio0grp {
+ fsl,pins = <
+ /* phy0/usbeth_phy reset */
+ MX6QDL_PAD_DISP0_DAT17__GPIO5_IO11 0x10030
+ /* phy0/usbeth_phy int */
+ MX6QDL_PAD_DISP0_DAT18__GPIO5_IO12 0x100b1
+
+ /* phy12/tja1102_phy0 reset */
+ MX6QDL_PAD_DISP0_DAT15__GPIO5_IO09 0x10030
+ /* phy12/tja1102_phy0 int */
+ MX6QDL_PAD_DISP0_DAT14__GPIO5_IO08 0x100b1
+ /* phy12/tja1102_phy0 enable. Set 100K pull-up */
+ MX6QDL_PAD_DISP0_DAT16__GPIO5_IO10 0x1f030
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_OE__ECSPI2_MISO 0x100b1
+ MX6QDL_PAD_EIM_CS0__ECSPI2_SCLK 0x100b1
+ MX6QDL_PAD_EIM_CS1__ECSPI2_MOSI 0x100b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x000b1
+ >;
+ };
+
+
+
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* SGTL5000 sys_mclk */
+ MX6QDL_PAD_CSI0_MCLK__CCM_CLKO1 0x030b0
+ /* CAN1_SR + CAN2_SR GPIO outputs */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x13070
+ MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x13070
+ /* CAN1_TERM (not used on WD3) */
+ MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0
+
+ /* HW revision detect */
+ /* REV_ID0 */
+ MX6QDL_PAD_SD4_DAT0__GPIO2_IO08 0x1b0b0
+ /* REV_ID1 */
+ MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x1b0b0
+ /* REV_ID2 */
+ MX6QDL_PAD_SD4_DAT2__GPIO2_IO10 0x1b0b0
+ /* REV_ID3 */
+ MX6QDL_PAD_SD4_DAT3__GPIO2_IO11 0x1b0b0
+ /* REV_ID4 */
+ MX6QDL_PAD_SD4_DAT4__GPIO2_IO12 0x1b0b0
+
+ /* USB charging control */
+ /* CHG Control */
+ MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x130b0
+ /* RID0 */
+ MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x130b0
+ /* RID1 */
+ MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x130b0
+ /* RID2 */
+ MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x130b0
+
+ /* Power VSEL and TG */
+ /* VSEL */
+ MX6QDL_PAD_NANDF_ALE__GPIO6_IO08 0x1b0b0
+ /* TG */
+ MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x1b0b0
+
+ /* Display panel 0 GPIO */
+ /* L/R */
+ MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b0
+ /* TS_nINT */
+ MX6QDL_PAD_CSI0_DAT11__GPIO5_IO29 0x1b0b0
+ /* EN */
+ MX6QDL_PAD_CSI0_DAT12__GPIO5_IO30 0x1b0b0
+ /* LVDS0_nINT */
+ MX6QDL_PAD_CSI0_DAT14__GPIO6_IO00 0x1b0b0
+ /* LVDS0_PD */
+ MX6QDL_PAD_CSI0_DAT15__GPIO6_IO01 0x1b0b0
+
+ /* Display panel 1 GPIO */
+ /* L/R */
+ MX6QDL_PAD_CSI0_MCLK__GPIO5_IO19 0x1b0b0
+ /* TS_nINT */
+ MX6QDL_PAD_CSI0_DATA_EN__GPIO5_IO20 0x1b0b0
+ /* EN */
+ MX6QDL_PAD_CSI0_PIXCLK__GPIO5_IO18 0x1b0b0
+ /* LVDS1_nINT */
+ MX6QDL_PAD_CSI0_DAT7__GPIO5_IO25 0x1b0b0
+ /* LVDS1_PD */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b0
+
+ /* Camera */
+ /* CAM_GPIO0 */
+ MX6QDL_PAD_CSI0_DAT13__GPIO5_IO31 0x1b0b0
+ /* CAM_nINT */
+ MX6QDL_PAD_CSI0_DAT16__GPIO6_IO02 0x1b0b0
+ /* CAM_GPIO1 */
+ MX6QDL_PAD_CSI0_DAT17__GPIO6_IO03 0x1b0b0
+ /* CAM_nPD */
+ MX6QDL_PAD_CSI0_DAT18__GPIO6_IO04 0x1b0b0
+ /* CAM_LOCK */
+ MX6QDL_PAD_CSI0_DAT19__GPIO6_IO05 0x1b0b0
+
+ /* USB ethernet reset (asix) */
+ MX6QDL_PAD_DISP0_DAT5__GPIO4_IO26 0x1b0b0
+ >;
+ };
+
+ pinctrl_wifi_npd: wifinpd {
+ fsl,pins = <
+ /* WL_REG_ON */
+ MX6QDL_PAD_NANDF_RB0__GPIO6_IO10 0x13069
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170b9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100b9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170b9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170b9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170b9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170b9
+ >;
+ };
+
+ pinctrl_audmux: audmuxgrp {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001f8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001f8b1
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ /* No leds */
+ fsl,pins = <>;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ /* CS */
+ MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x000b1
+ /* CAN2_nINT */
+ MX6QDL_PAD_DISP0_DAT4__GPIO4_IO25 0x1b0b1
+ >;
+ };
+
+ pinctrl_pwm1: pwm1grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ >;
+ };
+
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT9__PWM2_OUT 0x1b0b0
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6qp-vicutp.dts b/arch/arm/dts/imx6qp-vicutp.dts
new file mode 100644
index 0000000000..44cfe68867
--- /dev/null
+++ b/arch/arm/dts/imx6qp-vicutp.dts
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * Copyright (c) 2014 Protonic Holland
+ */
+
+/dts-v1/;
+#include <arm/imx6qp.dtsi>
+#include "imx6qdl-vicut1.dtsi"
+
+/ {
+ model = "Kverneland UT1P Board";
+ compatible = "kvg,vicutp", "fsl,imx6qp";
+
+ memory {
+ reg = <0x10000000 0x80000000>;
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet>;
+ phy-mode = "rgmii";
+ /* phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; */
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_enet: enetgrp {
+ fsl,pins = <
+ /* MX6QDL_ENET_PINGRP_RGMII_MD(0x1b030, 0x10030) */
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x10030
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x10030
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x10030
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x10030
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x10030
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x10030
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x10030
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x10030
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x10030
+
+ /* Phy reset */
+ MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b0b0
+ MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b1
+ >;
+ };
+};
diff --git a/arch/arm/dts/imx6ul-prti6g.dts b/arch/arm/dts/imx6ul-prti6g.dts
new file mode 100644
index 0000000000..e65198bab2
--- /dev/null
+++ b/arch/arm/dts/imx6ul-prti6g.dts
@@ -0,0 +1,81 @@
+/*
+ * Copyright (C) 2016 Protonic Holland
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+/dts-v1/;
+
+#include "imx6ul-prti6g.dtsi"
+
+/ {
+ model = "Protonic PRTI6G Board";
+ compatible = "prt,prti6g", "fsl,imx6ul";
+};
+
+&pinctrl_hog {
+ fsl,pins = <
+ /* HW revision detect */
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+ MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BOARD_ID0 */
+ MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 /* BOARD_ID1 */
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* BOARD_ID2 */
+ MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 /* BOARD_ID3 */
+
+ /* Safety controller IO */
+ MX6UL_PAD_SNVS_TAMPER6__GPIO5_IO06 0x1b0b0 /* WAKE_SC */
+ MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07 0x1b0b0 /* PROGRAM_SC */
+ >;
+};
+
+&ecspi2 {
+ status = "okay";
+};
+
+&can2 {
+ status = "okay";
+};
+
+&i2c2 {
+ can_adc: ads1015@49 {
+ compatible = "ti,ads1015";
+ reg = <0x49>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ channel@4 {
+ reg = <4>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@5 {
+ reg = <5>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@6 {
+ reg = <6>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+
+ channel@7 {
+ reg = <7>;
+ ti,gain = <3>;
+ ti,datarate = <3>;
+ };
+ };
+};
diff --git a/arch/arm/dts/imx6ul-prti6g.dtsi b/arch/arm/dts/imx6ul-prti6g.dtsi
new file mode 100644
index 0000000000..c20bbd5bc2
--- /dev/null
+++ b/arch/arm/dts/imx6ul-prti6g.dtsi
@@ -0,0 +1,330 @@
+/*
+ * Copyright (C) 2016 Protonic Holland
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <arm/imx6ul.dtsi>
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+ chosen {
+ stdout-path = &uart1;
+ environment@0 {
+ compatible = "barebox,environment";
+ device-path = &flash, "partname:env";
+ };
+ };
+
+ memory {
+ reg = <0x80000000 0x10000000>;
+ };
+
+ regulators {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ reg_3p2v: 3p2-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-3P2V";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-always-on;
+ };
+
+ reg_1p35v: 1p35-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "regulator-1P35V";
+ regulator-min-microvolt = <1350000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-always-on;
+ };
+ };
+
+ leds: leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds>;
+
+ debug {
+ label = "debug0";
+ gpios = <&gpio4 16 0>;
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
+
+&usbotg1 {
+ dr_mode = "host";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&usdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc1>;
+ cd-gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_3p2v>;
+ wakeup-source;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2>;
+ bus-width = <8>;
+ non-removable;
+ status = "okay";
+};
+
+&ecspi1 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 26 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ status = "okay";
+
+ flash: w25q64fv@0 {
+ compatible = "winbond,w25q64", "jedec,spi-nor";
+ spi-max-frequency = <20000000>;
+ m25p,fast-read;
+ reg = <0>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ partition@0 {
+ label = "boot";
+ reg = <0x0 0x60000>; /* 384 Kb */
+ };
+
+ partition@60000 {
+ label = "env";
+ reg = <0x60000 0x10000>; /* 64 Kb */
+ };
+
+ partition@70000 {
+ label = "dtb";
+ reg = <0x70000 0x10000>; /* 64 Kb */
+ };
+
+ partition@80000 {
+ label = "kernel";
+ reg = <0x80000 0x780000>; /* 7680 Kb */
+ };
+ };
+};
+
+&ecspi2 {
+ fsl,spi-num-chipselects = <1>;
+ cs-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ /* RFID chip */
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ clock-frequency = <100000>;
+ status = "okay";
+
+ rtc: pcf8563@51 {
+ compatible = "nxp,pcf8563";
+ reg = <0x51>;
+ };
+
+ tmp103: tmp103@70 {
+ compatible = "ti,tmp103", "tmp103";
+ reg = <0x70>;
+ };
+};
+
+&fec1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec1 &pinctrl_ethphy0_rst>;
+ phy-mode = "rmii";
+ phy-handle = <ðphy0>;
+ phy-reset-gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <11>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ reg = <0>;
+ };
+ };
+};
+
+
+&can1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ status = "okay";
+};
+
+&can2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+};
+
+&iomuxc {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hog>;
+
+ prti6g {
+ pinctrl_hog: hoggrp {
+ fsl,pins = <
+ /* HW revision detect */
+ MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08 0x1b0b0 /* REV_ID0 */
+ MX6UL_PAD_ENET2_RX_DATA1__GPIO2_IO09 0x1b0b0 /* REV_ID1 */
+ MX6UL_PAD_ENET2_RX_EN__GPIO2_IO10 0x1b0b0 /* REV_ID2 */
+ MX6UL_PAD_ENET2_TX_DATA0__GPIO2_IO11 0x1b0b0 /* REV_ID3 */
+ MX6UL_PAD_ENET2_TX_EN__GPIO2_IO13 0x1b0b0 /* BOARD_ID0 */
+ MX6UL_PAD_ENET2_TX_CLK__GPIO2_IO14 0x1b0b0 /* BOARD_ID1 */
+ MX6UL_PAD_ENET2_RX_ER__GPIO2_IO15 0x1b0b0 /* BOARD_ID2 */
+ MX6UL_PAD_ENET2_TX_DATA1__GPIO2_IO12 0x1b0b0 /* BOARD_ID3 */
+
+ /* CAN diagnostics (nSMBALERT) */
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x1b0b0
+ >;
+ };
+
+ pinctrl_leds: ledsgrp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_DQS__GPIO4_IO16 0x1b0b0
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+ MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc1: usdhc1grp {
+ fsl,pins = <
+ MX6UL_PAD_SD1_CMD__USDHC1_CMD 0x070b1
+ MX6UL_PAD_SD1_CLK__USDHC1_CLK 0x07099
+ MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x070b1
+ MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x070b1
+ MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x070b1
+ MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x070b1
+ MX6UL_PAD_NAND_READY_B__GPIO4_IO12 0x170b0 /* SD1 CD */
+ >;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <
+ MX6UL_PAD_NAND_WE_B__USDHC2_CMD 0x170f9
+ MX6UL_PAD_NAND_RE_B__USDHC2_CLK 0x100f9
+ MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+ MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+ MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+ MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+ MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
+ MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
+ MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
+ MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+ MX6UL_PAD_NAND_ALE__USDHC2_RESET_B 0x170b0
+ >;
+ };
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA04__ECSPI1_SCLK 0x0b0b0
+ MX6UL_PAD_CSI_DATA05__GPIO4_IO26 0x000b1
+ MX6UL_PAD_CSI_DATA06__ECSPI1_MOSI 0x0b0b0
+ MX6UL_PAD_CSI_DATA07__ECSPI1_MISO 0x0b0b0
+ >;
+ };
+
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_DATA00__ECSPI2_SCLK 0x0b0b0
+ MX6UL_PAD_CSI_DATA01__GPIO4_IO22 0x000b1
+ MX6UL_PAD_CSI_DATA02__ECSPI2_MOSI 0x0b0b0
+ MX6UL_PAD_CSI_DATA03__ECSPI2_MISO 0x0b0b0
+ >;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_MCLK__I2C1_SDA 0x4001b8b0
+ MX6UL_PAD_CSI_PIXCLK__I2C1_SCL 0x4001b8b0
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX6UL_PAD_CSI_VSYNC__I2C2_SDA 0x4001b8b0
+ MX6UL_PAD_CSI_HSYNC__I2C2_SCL 0x4001b8b0
+ >;
+ };
+
+ pinctrl_fec1: fec1grp {
+ fsl,pins = <
+ MX6UL_PAD_GPIO1_IO07__ENET1_MDC 0x1b0b0
+ MX6UL_PAD_GPIO1_IO06__ENET1_MDIO 0x100b0
+ MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN 0x100b0
+ MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER 0x1b0b0
+ MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
+ MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
+ MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1 0x4001b031
+ >;
+ };
+
+ pinctrl_ethphy0_rst: ethphy-rstgrp-0 {
+ fsl,pins = <
+ MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00 0x00880 /* PHY RESET */
+ >;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <
+ MX6UL_PAD_UART3_CTS_B__FLEXCAN1_TX 0x0b0b0
+ MX6UL_PAD_UART3_RTS_B__FLEXCAN1_RX 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03 0x0b0b0 /* SR */
+ MX6UL_PAD_SNVS_TAMPER4__GPIO5_IO04 0x0b0b0 /* TERM */
+ MX6UL_PAD_SNVS_TAMPER2__GPIO5_IO02 0x0b0b0 /* nSMBALERT */
+ >;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <
+ MX6UL_PAD_UART2_CTS_B__FLEXCAN2_TX 0x0b0b0
+ MX6UL_PAD_UART2_RTS_B__FLEXCAN2_RX 0x0b0b0
+ MX6UL_PAD_SNVS_TAMPER5__GPIO5_IO05 0x0b0b0 /* SR */
+ >;
+ };
+ };
+};
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* [PATCH v2 2/2] ARM: add imx6 based Protonic boads
2020-06-16 5:52 [PATCH v2 0/2] transfer Protonic barebox development to the mainline Oleksij Rempel
2020-06-16 5:52 ` [PATCH v2 1/2] ARM: dts: imx6: add Protonic boards Oleksij Rempel
@ 2020-06-16 5:52 ` Oleksij Rempel
2020-06-18 12:58 ` [PATCH v2 0/2] transfer Protonic barebox development to the mainline Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Oleksij Rempel @ 2020-06-16 5:52 UTC (permalink / raw)
To: barebox; +Cc: Oleksij Rempel, David Jander
Add initial support for 15 i.MX6 based Protonic boards.
Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
arch/arm/boards/Makefile | 1 +
arch/arm/boards/protonic-imx6/Makefile | 1 +
.../boards/protonic-imx6/ddr3-defines.imxcfg | 350 ++++++++++++++++
| 123 ++++++
| 115 ++++++
| 123 ++++++
| 123 ++++++
| 81 ++++
| 123 ++++++
| 123 ++++++
| 123 ++++++
| 115 ++++++
| 229 +++++++++++
| 280 +++++++++++++
| 123 ++++++
| 123 ++++++
| 127 ++++++
| 174 ++++++++
arch/arm/boards/protonic-imx6/lowlevel.c | 191 +++++++++
.../protonic-imx6/lpddr2-defines.imxcfg | 384 ++++++++++++++++++
.../boards/protonic-imx6/padsetup-dl.imxcfg | 70 ++++
.../boards/protonic-imx6/padsetup-q.imxcfg | 69 ++++
.../boards/protonic-imx6/padsetup-ul.imxcfg | 42 ++
arch/arm/dts/Makefile | 16 +
arch/arm/mach-imx/Kconfig | 6 +
images/Makefile.imx | 30 ++
26 files changed, 3265 insertions(+)
create mode 100644 arch/arm/boards/protonic-imx6/Makefile
create mode 100644 arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/lowlevel.c
create mode 100644 arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/padsetup-q.imxcfg
create mode 100644 arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg
diff --git a/arch/arm/boards/Makefile b/arch/arm/boards/Makefile
index e9e9163d58..48fac356c4 100644
--- a/arch/arm/boards/Makefile
+++ b/arch/arm/boards/Makefile
@@ -104,6 +104,7 @@ obj-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += plathome-openblocks-a6/
obj-$(CONFIG_MACH_PM9261) += pm9261/
obj-$(CONFIG_MACH_PM9263) += pm9263/
obj-$(CONFIG_MACH_PM9G45) += pm9g45/
+obj-$(CONFIG_MACH_PROTONIC_IMX6) += protonic-imx6/
obj-$(CONFIG_MACH_QIL_A9260) += qil-a926x/
obj-$(CONFIG_MACH_QIL_A9G20) += qil-a926x/
obj-$(CONFIG_MACH_RADXA_ROCK) += radxa-rock/
diff --git a/arch/arm/boards/protonic-imx6/Makefile b/arch/arm/boards/protonic-imx6/Makefile
new file mode 100644
index 0000000000..b08c4a93ca
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/Makefile
@@ -0,0 +1 @@
+lwl-y += lowlevel.o
diff --git a/arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg b/arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg
new file mode 100644
index 0000000000..65bd1bc3c6
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/ddr3-defines.imxcfg
@@ -0,0 +1,350 @@
+/*
+ * Timing configuration:
+ *
+ * MDCFG0:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tRFC 2Gb 400MHz 0x3f (64) 24 0x3f000000
+ * 4Gb 400MHz 0x77 (120) 24 0x77000000
+ * 8Gb 400MHz 0x8b (140) 24 0x8b000000
+ * 2Gb 533MHz 0x55 (86) 24 0x55000000
+ * 4Gb 533MHz 0x9f (160) 24 0x9f000000
+ * 8Gb 533MHz 0xba (187) 24 0xba000000
+ * tXS 2Gb 400MHz 0x43 (68) 16 0x00430000
+ * 4Gb 400MHz 0x7b (124) 16 0x007b0000
+ * 8Gb 400MHz 0x8f (144) 16 0x008f0000
+ * 2Gb 533MHz 0x5b (92) 16 0x005b0000
+ * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
+ * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
+ * tXP * 400MHz 0x2 (3) 13 0x00004000
+ * * 533MHz 0x3 (4) 13 0x00006000
+ * tXPDLL * 400MHz 0x9 (10) 9 0x00001200
+ * * 533MHz 0xc (13) 9 0x00001800
+ * tFAW * 400MHz 0x13 (20) 4 0x00000130
+ * * 533MHz 0x1a (27) 4 0x000001a0
+ * tCL * 400MHz 0x3 (6) 0 0x00000003
+ * * 533MHz-CL7 0x4 (7) 0 0x00000004
+ * * 533MHz-CL8 0x5 (8) 0 0x00000005
+ * ----------------------------------------------------------------
+ */
+#define MDCFG0_2G_400MHZ 0x3f435333
+#define MDCFG0_4G_400MHZ 0x777b5333
+#define MDCFG0_8G_400MHZ 0x8b8f5333
+#define MDCFG0_2G_533MHZ_CL8 0x555b79a5
+#define MDCFG0_2G_533MHZ_CL7 0x555b79a4
+#define MDCFG0_4G_533MHZ_CL8 0x9fa579a5
+#define MDCFG0_4G_533MHZ_CL7 0x9fa579a4
+#define MDCFG0_8G_533MHZ_CL8 0xbac079a5
+#define MDCFG0_8G_533MHZ_CL7 0xbac079a4
+
+/*
+ * MDCFG1:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tRCD * 400MHz 0x5 (6) 28 0xa0000000
+ * * 533MHz 0x7 (8) 28 0xe0000000
+ * tRP * 400MHz 0x5 (6) 26 0x14000000
+ * * 533MHz 0x7 (8) 26 0x1c000000
+ * tRC * 400MHz 0x14 (21) 21 0x02800000
+ * * 533MHz 0x1b (28) 21 0x03600000
+ * tRAS * 400MHz 0x0e (15) 16 0x000e0000
+ * * 533MHz 0x13 (20) 16 0x00130000
+ * tRPA * 0x1 (tRP+1) 15 0x00008000
+ * tWR * 400MHz 0x5 (6) 9 0x00000a00
+ * * 533MHz 0x7 (8) 9 0x00000e00
+ * tMRD * 0xb (12) 5 0x00000160
+ * tCWL * 400MHz 0x3 (5) 0 0x00000003
+ * * 533MHz 0x4 (6) 0 0x00000004
+ * ----------------------------------------------------------------
+ */
+#define MDCFG1_400MHZ 0xb68e8b63
+#define MDCFG1_533MHZ 0xff738f64
+
+/*
+ * MDCFG2:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tDLLK * 0x1ff (512) 16 0x01ff0000
+ * tRTP * 0x3 (4) 6 0x000000c0
+ * tWTR * 0x3 (4) 3 0x00000018
+ * tRRD * 400MHz 0x3 (4) 0 0x00000003
+ * * 533MHz 0x5 (6) 0 0x00000005
+ * ----------------------------------------------------------------
+ */
+#define MDCFG2_400MHZ 0x01ff00db
+#define MDCFG2_533MHZ 0x01ff00dd
+
+/*
+ * MDOR:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tXPR 2Gb 400MHz 0x43 (68) 16 0x00430000
+ * 4Gb 400MHz 0x7b (124) 16 0x007b0000
+ * 8Gb 400MHz 0x8f (144) 16 0x008f0000
+ * 2Gb 533MHz 0x5b (92) 16 0x005b0000
+ * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
+ * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
+ * SDE_to_RST * 0x10 (14) 8 0x00001000
+ * RST_to_CKE * 0x23 (33) 0 0x00000023
+ * ----------------------------------------------------------------
+ */
+#define MDOR_2G_400MHZ 0x00431023
+#define MDOR_4G_400MHZ 0x007b1023
+#define MDOR_8G_400MHZ 0x008f1023
+#define MDOR_2G_533MHZ 0x005b1023
+#define MDOR_4G_533MHZ 0x00a51023
+#define MDOR_8G_533MHZ 0x00c01023
+
+/*
+ * MDOTC ODT delays:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tAOFPD * 400MHz 0x0 (1) 27 0x00000000
+ * * 533MHz 0x1 (2) 27 0x08000000
+ * tAONPD * 400MHz 0x0 (1) 24 0x00000000
+ * * 533MHz 0x1 (2) 24 0x01000000
+ * tANPD * 400MHz 0x3 (4) 20 0x00300000
+ * * 533MHz 0x4 (5) 20 0x00400000
+ * tAXPD * 400MHz 0x3 (4) 16 0x00030000
+ * * 533MHz 0x4 (5) 16 0x00040000
+ * tODTLon * 400MHz 0x3 (3) 12 0x00003000
+ * * 533MHz 0x4 (4) 12 0x00004000
+ * tODTidle_off * 400MHz 0x3 (3) 4 0x00000030
+ * * 533MHz 0x4 (4) 4 0x00000040
+ * ----------------------------------------------------------------
+ */
+#define MDOTC_400MHZ 0x00333030
+#define MDOTC_533MHZ 0x09444040
+
+/*
+ * MDPDC:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * PRCT_1 * 0x0 28 0x00000000
+ * PRCT_0 * 0x0 24 0x00000000
+ * tCKE * 0x2 (3) 16 0x00020000
+ * PWDT_1 * 0x5 (256) 12 0x00005000
+ * PWDT_0 * 0x5 (256) 8 0x00000500
+ * SLOW_PD * 0x0 (0) 7 0x00000000
+ * BOTH_CS_PD * 0x1 (1) 6 0x00000040
+ * tCKSRX * 400MHz 0x5 (5) 3 0x00000028
+ * * 533MHz 0x6 (6) 3 0x00000030
+ * tCKSRE * 400MHz 0x5 (5) 0 0x00000005
+ * * 533MHz 0x6 (6) 0 0x00000006
+ * ----------------------------------------------------------------
+ */
+#define MDPDC_400MHZ 0x0002556d
+#define MDPDC_533MHZ 0x00025576
+
+/*
+ * MDCTL:
+ * 2Gb: CS0 enable, 14bit ROW, 10bit COL, BL=8, 64bit data
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * SDE_0 * 0x1 (1) 31 0x80000000
+ * SDE_1 * 0x0 (0) 30 0x00000000
+ * ROW 2Gb * 0x3 (14) 24 0x03000000
+ * 4Gb * 0x4 (15) 24 0x04000000
+ * 8Gb * 0x5 (16) 24 0x05000000
+ * COL * 0x1 (10) 20 0x00100000
+ * BL * 0x1 (8) 19 0x00080000
+ * DSIZ 64bit 0x2 (64) 16 0x00020000
+ * DSIZ 32bit 0x1 (32) 16 0x00010000
+ * DSIZ 16bit 0x0 (16) 16 0x00000000
+ * ----------------------------------------------------------------
+ */
+#define MDCTL_2G_16BIT 0x83180000
+#define MDCTL_2G_32BIT 0x83190000
+#define MDCTL_2G 0x831a0000
+#define MDCTL_4G_16BIT 0x84180000
+#define MDCTL_4G_32BIT 0x84190000
+#define MDCTL_4G 0x841a0000
+#define MDCTL_8G 0x851a0000
+
+/*
+ * MDASP Address space partitioning:
+ *
+ * At 0.25GiB, internal address space ends. Above that DDR3 should be
+ * located. The CS1/CS0 split-line determines where:
+ *
+ * For 1x2Gb chips (0.25GiB total on CS0): 0.5GiB
+ * For 2x4Gb chips (1GiB total on CS0): 1.25GiB
+ * For 4x2Gb chips (1GiB total on CS0): 1.25GiB
+ * For 4x4Gb chips (2GiB total on CS0): 2.25GiB
+ * For 4x8Gb chips (4GiB total on CS0): 4.00GiB (maximum possible,
+ * shadowed partially by internal address space).
+ *
+ * Register value Split
+ * ---------------------------
+ * 0x0000000f 0.5GiB
+ * 0x00000017 0.75GiB
+ * 0x00000027 1.25GiB
+ * 0x00000047 2.25GiB
+ * 0x0000007f 4.00GiB
+ */
+#define MDASP_512MIB 0x0000000f
+#define MDASP_768MIB 0x00000017
+#define MDASP_1GIB25 0x00000027
+#define MDASP_2GIB25 0x00000047
+#define MDASP_4GIB00 0x0000007f
+
+/*
+ * Initialize DDR3 chips
+ * MDSCR: Value = 0xvvvv803n, with 0xvvvv = value, n = Reg. number (BA)
+ */
+/*
+ * DDR3 chip MR2, n = 2:
+ *
+ * Par. Chip VALUE BITS vvvv
+ * ----------------------------------------------------------------
+ * Rtt(wr) * 0x0 (disabled) 10, 9 0x0000
+ * SR-Temp. * 0x1 (Extended) 7 0x0080
+ * Auto-SR * 0x0 (Manual) 6 0x0000
+ * CWL * 400MHz 0x0 (5tCK) 5, 4, 3 0x0000
+ * * 533MHz 0x1 (6tCK) 5, 4, 3 0x0008
+ * ----------------------------------------------------------------
+ */
+#define DDR3_MR2_400MHZ_RTT_OFF 0x00808032
+#define DDR3_MR2_533MHZ_RTT_OFF 0x00888032
+#define DDR3_MR2_400MHZ_RTT_120 0x04808032
+#define DDR3_MR2_533MHZ_RTT_120 0x04888032
+
+/*
+ * DDR3 chip MR1, n = 1:
+ *
+ * Par. Chip VALUE BITS vvvv
+ * ----------------------------------------------------------------
+ * Qoff * 0x0 (enabled) 12 0x0000
+ * TDQS * 0x0 (disabled) 11 0x0000
+ * Rtt * 0x0 (disabled) 9, 6, 2 0x0000
+ * Write-levelling * 0x0 (disable) 7 0x0000
+ * ODS * 0x0 (RZQ/6=40) 5, 1 0x0000
+ * DLL * 0x0 (enable) 0 0x0000
+ * ----------------------------------------------------------------
+ */
+#define DDR3_MR1_RTT_OFF_ODS_40 0x00008031
+#define DDR3_MR1_RTT_120_ODS_40 0x00408031
+#define DDR3_MR1_RTT_60_ODS_40 0x00048031
+#define DDR3_MR1_RTT_OFF_ODS_34 0x00028031
+#define DDR3_MR1_RTT_120_ODS_34 0x00428031
+#define DDR3_MR1_RTT_60_ODS_34 0x00068031
+
+/*
+ * DDR3 chip MR0, n = 0:
+ *
+ * Par. Chip VALUE BITS vvvv
+ * ----------------------------------------------------------------
+ * Precharge PD * 0x1 (fast exit) 12 0x1000
+ * WR 400MHz 0x2 (6) 11,10,9 0x0400
+ * 533MHz 0x4 (8) 11,10,9 0x0800
+ * DLL reset * 0x1 (Yes) 8 0x0100
+ * CL 400MHz 0x4 (6) 6,5,4,2 0x0020
+ * 533MHz 0x6 (7) 6,5,4,2 0x0030
+ * 533MHz 0x8 (8) 6,5,4,2 0x0040
+ * RD burst type * 0x0 (seq.) 3 0x0000
+ * BL * 0x0 (BL8) 0 0x0000
+ * ----------------------------------------------------------------
+ */
+#define DDR3_MR0_400MHZ 0x15208030
+#define DDR3_MR0_533MHZ_CL7 0x19308030
+#define DDR3_MR0_533MHZ_CL8 0x19408030
+
+
+/*
+ * MDREF:
+ * REF_SEL (bit 14,15): 0 (64kHz, needed for high-temp.)
+ * REFR (bit 11, 12, 13): 0x3 (4 refreshes) -> 0x00001800
+ * 0x7 (8 refreshes) -> 0x00003800
+ */
+#define MDREF_64KHZ 0x00001800
+#define MDREF_32KHZ 0x00007800
+
+/* MPODTCTRL */
+#define MPODTCTRL_ODT_OFF 0x00000007
+#define MPODTCTRL_ODT_120 0x00011117
+#define MPODTCTRL_ODT_60 0x00022227
+#define MPODTCTRL_ODT_40 0x00033337
+
+/*
+ * MPDGCTRL0:
+ *
+ * Channel 0:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * RST_RD_FIFO * 0 31 0x00000000
+ * DG_CMP_CYC * 1 30 0x40000000
+ * DG_DIS * 0 29 0x00000000
+ * HW_DG_EN * 0 28 0x00000000
+ * DG_HC_DEL1 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_EXT_UP * 0 23 0x00000000
+ * DG_DL_ABS_OFFS1 400MHz 0x35 16 0x00350000
+ * 533MHz 0x4b 16 0x004b0000
+ * DG_HC_DEL0 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS0 400MHz 0x35 0 0x00000031
+ * 533MHz 0x4b 0 0x00000050
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL0_CH0_400MHZ 0x42350231
+#define MPDGCTRL0_CH0_533MHZ 0x434b0350
+/*
+ *
+ * Channel 1:
+ *
+ * DG_HC_DEL1 (5) 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_DL_ABS_OFFS1 (5) 400MHz 0x35 16 0x00350000
+ * 533MHz 0x4b 16 0x004b0000
+ * DG_HC_DEL0 (4) 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS0 (4) 400MHz 0x35 0 0x00000031
+ * 533MHz 0x4b 0 0x00000050
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL0_CH1_400MHZ 0x42350231
+#define MPDGCTRL0_CH1_533MHZ 0x434b0350
+
+/*
+ * MPDGCTRL1:
+ *
+ * Channel 0:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * DG_HC_DEL3 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_DL_ABS_OFFS3 400MHz 0x1a 16 0x001a0000
+ * 533MHz 0x4c 16 0x004c0000
+ * DG_HC_DEL2 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS2 400MHz 0x18 0 0x00000018
+ * 533MHz 0x59 0 0x00000059
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL1_CH0_400MHZ 0x021a0218
+#define MPDGCTRL1_CH0_533MHZ 0x034c0359
+/*
+ *
+ * Channel 1:
+ *
+ * DG_HC_DEL3 (7) 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_DL_ABS_OFFS3 (7) 400MHz 0x1a 16 0x001a0000
+ * 533MHz 0x65 16 0x00650000
+ * DG_HC_DEL2 (6) 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS2 (6) 400MHz 0x18 0 0x00000018
+ * 533MHz 0x48 0 0x00000048
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL1_CH1_400MHZ 0x021a0218
+#define MPDGCTRL1_CH1_533MHZ 0x03650348
--git a/arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg
new file mode 100644
index 0000000000..a73857cae9
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-alti6p.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x0001f0b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_4G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_4G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_1GIB25
+wm 32 0x021b0000 MDCTL_4G_32BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x001f001f
+wm 32 0x021b4810 0x001f001f
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: ALTI6P doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x000130b0
--git a/arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg
new file mode 100644
index 0000000000..d926cecc5f
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-lanmcu.imxcfg
@@ -0,0 +1,115 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug 0 LED */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e060c 0x000130b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_2G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_2G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_512MIB
+wm 32 0x021b0000 MDCTL_2G_16BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
+wm 32 0x021b4810 0x00440044
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: MVT doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
--git a/arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg
new file mode 100644
index 0000000000..d91b38cc2d
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-plybas.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x0001f0b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_2G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_2G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_512MIB
+wm 32 0x021b0000 MDCTL_2G_16BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
+wm 32 0x021b4810 0x00440044
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: MVT doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x000130b0
--git a/arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg
new file mode 100644
index 0000000000..d91b38cc2d
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-plym2m.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x0001f0b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_2G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_2G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_512MIB
+wm 32 0x021b0000 MDCTL_2G_16BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
+wm 32 0x021b4810 0x00440044
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: MVT doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x000130b0
--git a/arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg
new file mode 100644
index 0000000000..f58b0181ea
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-prti6g.imxcfg
@@ -0,0 +1,81 @@
+soc imx6
+loadaddr 0x80000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+#include "padsetup-ul.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_2G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_2G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 0x00000047 /* MDASP_512MIB */
+wm 32 0x021b0000 MDCTL_2G_16BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 0x00000117 /* MPODTCTRL_ODT_120 */
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b0850 0x40404040 /* For now set all to 50%. */
+
+/* MPWLDECTRL0 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Enable all clocks */
+wm 32 0x020c4068 0xffffffff
+wm 32 0x020c406c 0xffffffff
+wm 32 0x020c4070 0xffffffff
+wm 32 0x020c4074 0xffffffff
+wm 32 0x020c4078 0xffffffff
+wm 32 0x020c407c 0xffffffff
+wm 32 0x020c4080 0xffffffff
--git a/arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg
new file mode 100644
index 0000000000..8b7c9ea3b0
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-prti6q.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e0228 0x00000005
+wm 32 0x020e0244 0x00000005
+wm 32 0x020e05f8 0x000130b0
+wm 32 0x020e0614 0x0001b0b0
+
+#include "padsetup-q.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00000742
+check 32 until_all_bits_clear 0x021b0018 0x00000002
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+check 32 until_any_bit_set 0x021b001c 0x00004000
+
+wm 32 0x021b000c MDCFG0_8G_533MHZ_CL7
+wm 32 0x021b0010 MDCFG1_533MHZ
+wm 32 0x021b0014 MDCFG2_533MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_8G_533MHZ
+wm 32 0x021b0008 MDOTC_533MHZ
+wm 32 0x021b0004 MDPDC_533MHZ
+wm 32 0x021b0040 MDASP_4GIB00
+wm 32 0x021b0000 MDCTL_8G
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_533MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_533MHZ_CL7
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_60
+wm 32 0x021b4818 MPODTCTRL_ODT_60
+
+wm 32 0x021b083c MPDGCTRL0_CH0_533MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_533MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_533MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_533MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x001f001f
+wm 32 0x021b4810 0x001f001f
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00001006 /* Enable autorefresh */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* DEBUG leds */
+wm 32 0x020e0244 0x00000005
+wm 32 0x020e0614 0x000130b0
+
+/* RGMII config */
+wm 32 0x020e0790 0x00080000 /* 1V2 DDR IO */
+wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */
--git a/arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg
new file mode 100644
index 0000000000..caffae26c7
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-prtmvt.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x0001f0b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_4G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_4G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_1GIB25
+wm 32 0x021b0000 MDCTL_4G_16BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
+wm 32 0x021b4810 0x00440044
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: MVT doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x000130b0
--git a/arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg
new file mode 100644
index 0000000000..d91b38cc2d
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-prtrvt.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x0001f0b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_2G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_2G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_512MIB
+wm 32 0x021b0000 MDCTL_2G_16BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
+wm 32 0x021b4810 0x00440044
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: MVT doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x000130b0
--git a/arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg
new file mode 100644
index 0000000000..c548d5f78e
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-prtvt7.imxcfg
@@ -0,0 +1,115 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug 0 LED */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e060c 0x000130b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_2G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_2G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_768MIB
+wm 32 0x021b0000 MDCTL_2G_32BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
+wm 32 0x021b4810 0x00440044
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: MVT doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
--git a/arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg
new file mode 100644
index 0000000000..4e38ae4285
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-prtwd2.imxcfg
@@ -0,0 +1,229 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "lpddr2-defines.imxcfg"
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* Set DDR clk to 400MHz. */
+wm 32 0x020c4018 0x00060324
+
+/* #include "padsetup-q.imxcfg" */
+
+/* LPDDR2 i.MX6D/Q pad setup */
+wm 32 0x020e0798 0x00080000
+wm 32 0x020e0758 0x00000000
+
+wm 32 0x020e0588 0x00000030
+wm 32 0x020e0594 0x00000030
+
+wm 32 0x020e056c 0x00000030
+wm 32 0x020e0578 0x00000030
+wm 32 0x020e074c 0x00000030
+
+wm 32 0x020e057c 0x00000030
+wm 32 0x020e058c 0x00000000
+wm 32 0x020e059c 0x00000030
+wm 32 0x020e05a0 0x00000030
+wm 32 0x020e078c 0x00000030
+
+wm 32 0x020e0750 0x00020000
+wm 32 0x020e05a8 0x00003030
+wm 32 0x020e05b0 0x00003030
+wm 32 0x020e0524 0x00003030
+wm 32 0x020e051c 0x00003030
+wm 32 0x020e0518 0x00003030
+wm 32 0x020e050c 0x00003030
+wm 32 0x020e05b8 0x00003030
+wm 32 0x020e05c0 0x00003030
+
+wm 32 0x020e0774 0x00020000
+wm 32 0x020e0784 0x00000030
+wm 32 0x020e0788 0x00000030
+wm 32 0x020e0794 0x00000030
+wm 32 0x020e079c 0x00000030
+wm 32 0x020e07a0 0x00000030
+wm 32 0x020e07a4 0x00000030
+wm 32 0x020e07a8 0x00000030
+wm 32 0x020e0748 0x00000030
+
+wm 32 0x020e05ac 0x00000030
+wm 32 0x020e05b4 0x00000030
+wm 32 0x020e0528 0x00000030
+wm 32 0x020e0520 0x00000030
+wm 32 0x020e0514 0x00000030
+wm 32 0x020e0510 0x00000030
+wm 32 0x020e05bc 0x00000030
+wm 32 0x020e05c4 0x00000030
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+check 32 until_any_bit_set 0x021b001c 0x00004000
+wm 32 0x021b401c 0x00008000
+/* check 32 until_any_bit_set 0x021b401c 0x00004000 */
+
+
+wm 32 0x021b085c 0x1b4700c7
+wm 32 0x021b485c 0x1b4700c7
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
+
+wm 32 0x021b0890 0x00400000
+wm 32 0x021b4890 0x00400000
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+wm 32 0x021b083c 0x20000000
+wm 32 0x021b0840 0x00000000
+wm 32 0x021b483c 0x20000000
+wm 32 0x021b4840 0x00000000
+
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* Set Write data delay 3 delay units for all bits */
+wm 32 0x021b082c 0xf3333333
+wm 32 0x021b0830 0xf3333333
+wm 32 0x021b0834 0xf3333333
+wm 32 0x021b0838 0xf3333333
+wm 32 0x021b482c 0xf3333333
+wm 32 0x021b4830 0xf3333333
+wm 32 0x021b4834 0xf3333333
+wm 32 0x021b4838 0xf3333333
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/*
+ * Configure MMDC Channel 0
+ */
+
+/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
+wm 32 0x021b0018 0x00001602
+check 32 until_all_bits_clear 0x021b0018 0x00000002
+
+wm 32 0x021b0004 0x00020036
+wm 32 0x021b0008 0x12272000 /* FIXME: Why does script aid set this? */
+wm 32 0x021b000c MDCFG0_8G_LPDDR2_CL6
+wm 32 0x021b0010 MDCFG1_LPDDR2
+wm 32 0x021b0014 MDCFG2_LPDDR2
+
+wm 32 0x021b0018 0x0000174c
+wm 32 0x021b001c 0x00008000
+wm 32 0x021b002c 0x0f9f26d2 /* MDRWD */
+wm 32 0x021b0030 MDOR_LPDDR2
+wm 32 0x021b0038 0x00190778 /* MDCFG3LP */
+wm 32 0x021b0040 0x0000004f /* NOTE: According to RM */
+wm 32 0x021b0400 0x11420000 /* MAARCR disable dyn jump */
+wm 32 0x021b0000 MDCTL_LPDDR2
+
+/*
+ * Configure MMDC Channel 1
+ */
+
+/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
+wm 32 0x021b4018 0x00001602
+check 32 until_all_bits_clear 0x021b4018 0x00000002
+
+wm 32 0x021b4004 0x00020036
+wm 32 0x021b4008 0x12272000 /* FIXME: Why does script aid set this? */
+wm 32 0x021b400c MDCFG0_8G_LPDDR2_CL6
+wm 32 0x021b4010 MDCFG1_LPDDR2
+wm 32 0x021b4014 MDCFG2_LPDDR2
+
+wm 32 0x021b4018 0x0000174c
+wm 32 0x021b401c 0x00008000
+wm 32 0x021b402c 0x0f9f26d2 /* MDOR */
+wm 32 0x021b4030 MDOR_LPDDR2
+wm 32 0x021b4038 0x00190778 /* MDCFG3LP */
+wm 32 0x021b4040 MDASP_768MIB /* NOTE: According to RM */
+wm 32 0x021b4400 0x11420000 /* MAARCR disable dyn jump */
+wm 32 0x021b4000 MDCTL_LPDDR2
+
+/*
+ * Configure LPDDR2 devices
+ */
+
+wm 32 0x021b001c 0x00008010 /* Precharge all ch 0 */
+wm 32 0x021b401c 0x00008010 /* Precharge all ch 1 */
+
+/* Channel 0 */
+wm 32 0x021b001c 0x003f8030 /* Reset */
+wm 32 0x021b001c 0xff0a8030 /* Calibrate */
+wm 32 0x021b001c 0x82018030 /* MR1: nWR=6, WC=0, BT=0, BL=BL4 */
+wm 32 0x021b001c 0x04028030 /* MR2: RL6/WL3 */
+wm 32 0x021b001c 0x02038030 /* MR3: DS = 40 Ohm */
+
+/* Channel 1 */
+wm 32 0x021b401c 0x003f8030
+wm 32 0x021b401c 0xff0a8030
+wm 32 0x021b401c 0x82018030
+wm 32 0x021b401c 0x04028030
+wm 32 0x021b401c 0x02038030
+
+/* MPDGCTRL disabled, reset fifos */
+wm 32 0x021b083c 0xa0000000
+wm 32 0x021b083c 0xa0000000
+check 32 until_all_bits_clear 0x021b083c 0x80000000
+wm 32 0x021b483c 0xa0000000
+wm 32 0x021b483c 0xa0000000
+check 32 until_all_bits_clear 0x021b483c 0x80000000
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
+
+wm 32 0x021b0020 MDREF_64KHZ
+wm 32 0x021b4020 MDREF_64KHZ
+
+wm 32 0x021b0818 0x00000000 /* LPDDR2: Disable ODT! */
+wm 32 0x021b4818 0x00000000
+
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b4004 MDPDC_400MHZ
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011006 /* Enable autorefresh */
+wm 32 0x021b4404 0x00011006 /* Enable autorefresh */
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+wm 32 0x021b401c 0x00000000 /* Disable configuration req */
+
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* DEBUG leds */
+wm 32 0x020e0244 0x00000005
+wm 32 0x020e0614 0x000130b0
+
+/* configure 100K pull down on USB_ETH_CHG -> ADC_ICHG */
+wm 32 0x020e06cc 0x000130f9
--git a/arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg
new file mode 100644
index 0000000000..f7ad652cc1
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-prtwd3.imxcfg
@@ -0,0 +1,280 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "lpddr2-defines.imxcfg"
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* Set DDR clk to 400MHz. */
+wm 32 0x020c4018 0x00060324
+
+/* #include "padsetup-q.imxcfg" */
+
+/* LPDDR2 i.MX6D/Q pad setup */
+wm 32 0x020e0798 0x00080000
+wm 32 0x020e0758 0x00000000
+
+wm 32 0x020e0588 0x00000030
+wm 32 0x020e0594 0x00000030
+
+wm 32 0x020e056c 0x00000030
+wm 32 0x020e0578 0x00000030
+wm 32 0x020e074c 0x00000030
+
+wm 32 0x020e057c 0x00000030
+wm 32 0x020e058c 0x00000000
+wm 32 0x020e059c 0x00000030
+wm 32 0x020e05a0 0x00000030
+wm 32 0x020e078c 0x00000030
+
+wm 32 0x020e0750 0x00020000
+wm 32 0x020e05a8 0x00003030
+wm 32 0x020e05b0 0x00003030
+wm 32 0x020e0524 0x00003030
+wm 32 0x020e051c 0x00003030
+wm 32 0x020e0518 0x00003030
+wm 32 0x020e050c 0x00003030
+wm 32 0x020e05b8 0x00003030
+wm 32 0x020e05c0 0x00003030
+
+wm 32 0x020e0774 0x00020000
+wm 32 0x020e0784 0x00000030
+wm 32 0x020e0788 0x00000030
+wm 32 0x020e0794 0x00000030
+wm 32 0x020e079c 0x00000030
+wm 32 0x020e07a0 0x00000030
+wm 32 0x020e07a4 0x00000030
+wm 32 0x020e07a8 0x00000030
+wm 32 0x020e0748 0x00000030
+
+wm 32 0x020e05ac 0x00000030
+wm 32 0x020e05b4 0x00000030
+wm 32 0x020e0528 0x00000030
+wm 32 0x020e0520 0x00000030
+wm 32 0x020e0514 0x00000030
+wm 32 0x020e0510 0x00000030
+wm 32 0x020e05bc 0x00000030
+wm 32 0x020e05c4 0x00000030
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+check 32 until_any_bit_set 0x021b001c 0x00004000
+wm 32 0x021b401c 0x00008000
+/* check 32 until_any_bit_set 0x021b401c 0x00004000 */
+
+
+wm 32 0x021b085c 0x1b4700c7
+wm 32 0x021b485c 0x1b4700c7
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
+
+wm 32 0x021b0890 0x00400000
+wm 32 0x021b4890 0x00400000
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+wm 32 0x021b083c 0x20000000
+wm 32 0x021b0840 0x00000000
+wm 32 0x021b483c 0x20000000
+wm 32 0x021b4840 0x00000000
+
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* Set Write data delay 3 delay units for all bits */
+wm 32 0x021b082c 0xf3333333
+wm 32 0x021b0830 0xf3333333
+wm 32 0x021b0834 0xf3333333
+wm 32 0x021b0838 0xf3333333
+wm 32 0x021b482c 0xf3333333
+wm 32 0x021b4830 0xf3333333
+wm 32 0x021b4834 0xf3333333
+wm 32 0x021b4838 0xf3333333
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* NOC: DDRCONF */
+/* Sabre-auto: wm 32 0x00bb0008 0x00000000 */
+/* Values (Address mapping for 64bit):
+ * 0 : 16 Row, 3 Bank, 10 Col interleave (11 Col for 32 bit)
+ * 1 : 15 Row, 3 Bank, 11 Col interleave (12 Col for 32 bit)
+ * 2 : 18 Row, 3 Bank, 8 Col interleave (9 Col for 32 bit)
+ * 3 : 17 Row, 3 Bank, 9 Col interleave (10 Col for 32 bit)
+ * 4 : 2 CS (?), 15 Row, 3 Bank, 10 Col, interleave
+ * ...
+ */
+wm 32 0x00bb0008 0x00000000
+
+/*
+ * NOC DdrTiming:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * ActToAct 533MHz 0x1b (28) 0 0x0000001b
+ * LPDDR2 0x18 (24) 0 0x00000018
+ * RdToMiss 533MHz 0x10 (16) 6 0x00000400
+ * LPDDR2 0x11 (17) 6 0x00000440
+ * WrToMiss * 0x1e (30) 12 0x0001e000
+ * LPDDR2 0x19 (25) 12 0x00019000
+ * BurstLen * 0x4 (8/2) 18 0x00100000
+ * LPDDR2 0x2 (4/2) 18 0x00080000
+ * RdToWr * 0x3 (3) 21 0x00600000
+ * LPDDR2 0x5 (5) 21 0x00a00000
+ * WrToRd * 0xa (10) 26 0x28000000
+ * LPDDR2 0x6 (6) 26 0x18000000
+ * BwRatio * 0x0 (0) 31 0x00000000
+ * ----------------------------------------------------------------
+ */
+/* Sabre-auto: wm 32 0x00bb000c 0x2891E41A */
+wm 32 0x00bb000c 0x18a99459
+
+/*
+ * NOC Activate:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * Rrd * 0x6 (6) 0 0x00000006
+ * LPDDR2 0x4 (4) 0 0x00000004
+ * Faw * 0x1b (27) 4 0x000001b0
+ * LPDDR2 0x14 (20) 4 0x00000140
+ * FawBank * 0x0 (0) 10 0x00000000
+ * ----------------------------------------------------------------
+ */
+/* Sabre-auto: wm 32 0x00bb0038 0x00000564 */
+wm 32 0x00bb0038 0x00000144
+
+/*
+ * NOC ReadLatency: (FIXME)
+ */
+wm 32 0x00bb0014 0x00000040
+
+/*
+ * Configure MMDC Channel 0
+ */
+
+/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
+wm 32 0x021b0018 0x00001602
+check 32 until_all_bits_clear 0x021b0018 0x00000002
+
+wm 32 0x021b0004 0x00020036
+wm 32 0x021b0008 0x12272000 /* FIXME: Why does script aid set this? */
+wm 32 0x021b000c MDCFG0_8G_LPDDR2_CL6
+wm 32 0x021b0010 MDCFG1_LPDDR2
+wm 32 0x021b0014 MDCFG2_LPDDR2
+
+wm 32 0x021b0018 0x0000174c
+wm 32 0x021b001c 0x00008000
+wm 32 0x021b002c 0x0f9f26d2 /* MDRWD */
+wm 32 0x021b0030 MDOR_LPDDR2
+wm 32 0x021b0038 0x00190778 /* MDCFG3LP */
+wm 32 0x021b0040 0x0000004f /* NOTE: According to RM */
+wm 32 0x021b0400 0x15420000 /* MAARCR disable dyn jump/reordering */
+wm 32 0x021b0000 MDCTL_LPDDR2
+
+/*
+ * Configure MMDC Channel 1
+ */
+
+/* MDMISC No addr mirror, 0 WALAT, 5 RALAT, LPDDR2 mode, RST */
+wm 32 0x021b4018 0x00001602
+check 32 until_all_bits_clear 0x021b4018 0x00000002
+
+wm 32 0x021b4004 0x00020036
+wm 32 0x021b4008 0x12272000 /* FIXME: Why does script aid set this? */
+wm 32 0x021b400c MDCFG0_8G_LPDDR2_CL6
+wm 32 0x021b4010 MDCFG1_LPDDR2
+wm 32 0x021b4014 MDCFG2_LPDDR2
+
+wm 32 0x021b4018 0x0000174c
+wm 32 0x021b401c 0x00008000
+wm 32 0x021b402c 0x0f9f26d2 /* MDRWD */
+wm 32 0x021b4030 MDOR_LPDDR2
+wm 32 0x021b4038 0x00190778 /* MDCFG3LP */
+wm 32 0x021b4040 MDASP_768MIB /* NOTE: According to RM */
+wm 32 0x021b4400 0x15420000 /* MAARCR disable dyn jump/reordering */
+wm 32 0x021b4000 MDCTL_LPDDR2
+
+/*
+ * Configure LPDDR2 devices
+ */
+
+wm 32 0x021b001c 0x00008010 /* Precharge all ch 0 */
+wm 32 0x021b401c 0x00008010 /* Precharge all ch 1 */
+
+/* Channel 0 */
+wm 32 0x021b001c 0x003f8030 /* Reset */
+wm 32 0x021b001c 0xff0a8030 /* Calibrate */
+wm 32 0x021b001c 0x82018030 /* MR1: nWR=6, WC=0, BT=0, BL=BL4 */
+wm 32 0x021b001c 0x04028030 /* MR2: RL6/WL3 */
+wm 32 0x021b001c 0x02038030 /* MR3: DS = 40 Ohm */
+
+/* Channel 1 */
+wm 32 0x021b401c 0x003f8030
+wm 32 0x021b401c 0xff0a8030
+wm 32 0x021b401c 0x82018030
+wm 32 0x021b401c 0x04028030
+wm 32 0x021b401c 0x02038030
+
+/* MPDGCTRL disabled, reset fifos */
+wm 32 0x021b083c 0xa0000000
+wm 32 0x021b083c 0xa0000000
+check 32 until_all_bits_clear 0x021b083c 0x80000000
+wm 32 0x021b483c 0xa0000000
+wm 32 0x021b483c 0xa0000000
+check 32 until_all_bits_clear 0x021b483c 0x80000000
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1380003 /* FIXME: Why different? */
+
+wm 32 0x021b0020 MDREF_64KHZ
+wm 32 0x021b4020 MDREF_64KHZ
+
+wm 32 0x021b0818 0x00000000 /* LPDDR2: Disable ODT! */
+wm 32 0x021b4818 0x00000000
+
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b4004 MDPDC_400MHZ
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011006 /* Enable autorefresh */
+wm 32 0x021b4404 0x00011006 /* Enable autorefresh */
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+wm 32 0x021b401c 0x00000000 /* Disable configuration req */
+
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* configure 100K pull down on USB_ETH_CHG -> ADC_ICHG */
+wm 32 0x020e06cc 0x000130f9
--git a/arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg
new file mode 100644
index 0000000000..55aa059431
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-victgo.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x0001f0b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_4G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_4G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_1GIB25
+wm 32 0x021b0000 MDCTL_4G_32BIT
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x001f001f
+wm 32 0x021b4810 0x001f001f
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config: MVT doesn't have GRMII, disable! */
+wm 32 0x020e0768 0x000c0000 /* 1V5 DDR IO */
+wm 32 0x020e0788 0x00000000 /* disable ODT */
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x000130b0
--git a/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
new file mode 100644
index 0000000000..7ebb52c2ab
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-vicut1.imxcfg
@@ -0,0 +1,123 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x000130b0
+wm 32 0x020e0610 0x0001f0b0
+
+#include "padsetup-dl.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011740
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+
+wm 32 0x021b000c MDCFG0_4G_400MHZ
+wm 32 0x021b0010 MDCFG1_400MHZ
+wm 32 0x021b0014 MDCFG2_400MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_4G_400MHZ
+wm 32 0x021b0008 MDOTC_400MHZ
+wm 32 0x021b0004 MDPDC_400MHZ
+wm 32 0x021b0040 MDASP_2GIB25
+wm 32 0x021b0000 MDCTL_4G
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_400MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_400MHZ
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_120
+wm 32 0x021b4818 MPODTCTRL_ODT_120
+
+wm 32 0x021b083c MPDGCTRL0_CH0_400MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_400MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_400MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_400MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x00440044 /* FIXME: Why these seeminly arbitrary values? */
+wm 32 0x021b4810 0x00440044
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00011007 /* 0x0001...? FIXME: Disable powersaving for now */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* RGMII config */
+wm 32 0x020e0768 0x00080000 /* 1V2 DDR IO */
+wm 32 0x020e0788 0x00000200 /* 60 Ohm ODT */
+
+/* Debug */
+wm 32 0x020e023c 0x00000005
+wm 32 0x020e0240 0x00000005
+wm 32 0x020e060c 0x0001f0b0
+wm 32 0x020e0610 0x000130b0
--git a/arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg
new file mode 100644
index 0000000000..fdc328d892
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-vicut1q.imxcfg
@@ -0,0 +1,127 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e0228 0x00000005
+/* wm 32 0x020e0244 0x00000005 */
+wm 32 0x020e05f8 0x000130b0
+/* wm 32 0x020e0614 0x000130b0 */
+
+#include "padsetup-q.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00011742
+check 32 until_all_bits_clear 0x021b0018 0x00000002
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+check 32 until_any_bit_set 0x021b001c 0x00004000
+
+wm 32 0x021b000c MDCFG0_8G_533MHZ_CL7
+wm 32 0x021b0010 MDCFG1_533MHZ
+wm 32 0x021b0014 MDCFG2_533MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_8G_533MHZ
+wm 32 0x021b0008 MDOTC_533MHZ
+wm 32 0x021b0004 MDPDC_533MHZ
+wm 32 0x021b0040 MDASP_4GIB00
+wm 32 0x021b0000 MDCTL_8G
+// check 32 until_any_bit_set 0x021b0018 0x80000000
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_533MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_533MHZ_CL7
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_60
+wm 32 0x021b4818 MPODTCTRL_ODT_60
+
+/* DQS gating calibration measured on UT2 and UTC boards */
+wm 32 0x021b083c 0x43000300
+wm 32 0x021b483c 0x430a0310
+
+wm 32 0x021b0840 0x030002b0
+wm 32 0x021b4840 0x02b00255
+
+/* MPRDDLCTL, MPWRDLCTL */
+/* Measured on UT2 and UTC, good averages */
+wm 32 0x021b0848 0x453a3a3a
+wm 32 0x021b4848 0x403b3947
+wm 32 0x021b0850 0x40444540
+wm 32 0x021b4850 0x46404840
+
+/* MPWLDECTRL0,1 */
+/* Measured and averaged on UT2 and UTC boards */
+wm 32 0x021b080c 0x00200020
+wm 32 0x021b0810 0x0026001e
+wm 32 0x021b480c 0x00100028
+wm 32 0x021b4810 0x0012001b
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00001006 /* Enable autorefresh */
+
+/* Clock configuration (CCM) */
+/* CCGR0..6 */
+wm 32 0x020c4068 0x00c03f3f
+wm 32 0x020c406c 0x0030fc03
+wm 32 0x020c4070 0x0fffc000
+wm 32 0x020c4074 0x3ff00000
+wm 32 0x020c4078 0x00fff300
+wm 32 0x020c407c 0x0f0000c3
+wm 32 0x020c4080 0x000003ff
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* DEBUG leds */
+wm 32 0x020e0244 0x00000005
+wm 32 0x020e0614 0x000130b0
+
+/* RGMII config */
+wm 32 0x020e0790 0x00080000 /* 1V2 DDR IO */
+wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */
--git a/arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg b/arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg
new file mode 100644
index 0000000000..3ca21f683a
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/flash-header-vicutp.imxcfg
@@ -0,0 +1,174 @@
+soc imx6
+loadaddr 0x10000000
+dcdofs 0x400
+
+#include "ddr3-defines.imxcfg"
+
+/* Debug */
+wm 32 0x020e0228 0x00000005
+/* wm 32 0x020e0244 0x00000005 */
+wm 32 0x020e05f8 0x000130b0
+/* wm 32 0x020e0614 0x000130b0 */
+
+#include "padsetup-q.imxcfg"
+
+/* Set Read data delay 3 delay units for all bits */
+wm 32 0x021b081c 0x33333333
+wm 32 0x021b0820 0x33333333
+wm 32 0x021b0824 0x33333333
+wm 32 0x021b0828 0x33333333
+wm 32 0x021b481c 0x33333333
+wm 32 0x021b4820 0x33333333
+wm 32 0x021b4824 0x33333333
+wm 32 0x021b4828 0x33333333
+
+/* MDMISC No addr mirror, 1 WALAT, 5 RALAT, DDR3 mode */
+wm 32 0x021b0018 0x00001742
+check 32 until_all_bits_clear 0x021b0018 0x00000002
+
+/* CSCR: Configuration mode */
+wm 32 0x021b001c 0x00008000
+check 32 until_any_bit_set 0x021b001c 0x00004000
+
+wm 32 0x021b000c MDCFG0_4G_533MHZ_CL7
+wm 32 0x021b0010 MDCFG1_533MHZ
+wm 32 0x021b0014 MDCFG2_533MHZ
+
+/* MDRWD */
+wm 32 0x021b002c 0x000026d2
+
+wm 32 0x021b0030 MDOR_4G_533MHZ
+wm 32 0x021b0008 MDOTC_533MHZ
+wm 32 0x021b0004 MDPDC_533MHZ
+wm 32 0x021b0040 MDASP_2GIB25
+
+/* Dual-Plus specific configuration */
+/* MMDC: MAARCR: Disable reordering */
+wm 32 0x021b0400 0x14420000
+/* MMDC: MPPDCMPR2: ZQ Offset setting (TODO) */
+wm 32 0x021b0890 0x00400008 /* Freescale sabre-auto: 0x00400C58 */
+
+/* NOC: DDRCONF */
+/* Sabre-auto: wm 32 0x00bb0008 0x00000000 */
+/* Values (Address mapping for 64bit):
+ * 0 : 16 Row, 3 Bank, 10 Col interleave (11 Col for 32 bit)
+ * 1 : 15 Row, 3 Bank, 11 Col interleave (12 Col for 32 bit)
+ * 2 : 18 Row, 3 Bank, 8 Col interleave (9 Col for 32 bit)
+ * 3 : 17 Row, 3 Bank, 9 Col interleave (10 Col for 32 bit)
+ * 4 : 2 CS (?), 15 Row, 3 Bank, 10 Col, interleave
+ * ...
+ */
+wm 32 0x00bb0008 0x00000000
+
+/*
+ * NOC DdrTiming:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * ActToAct 533MHz 0x1b (28) 0 0x0000001b
+ * RdToMiss 533MHz 0x10 (16) 6 0x00000400
+ * WrToMiss * 0x1e (30) 12 0x0001e000
+ * BurstLen * 0x4 (8/2) 18 0x00100000
+ * RdToWr * 0x3 (3) 21 0x00600000
+ * WrToRd * 0xa (10) 26 0x28000000
+ * BwRatio * 0x0 (0) 31 0x00000000
+ * ----------------------------------------------------------------
+ */
+/* Sabre-auto: wm 32 0x00bb000c 0x2891E41A */
+wm 32 0x00bb000c 0x2871e41c
+
+/*
+ * NOC Activate:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * Rrd * 0x6 (6) 0 0x00000006
+ * Faw * 0x1b (27) 4 0x000001b0
+ * FawBank * 0x0 (0) 10 0x00000000
+ * ----------------------------------------------------------------
+ */
+/* Sabre-auto: wm 32 0x00bb0038 0x00000564 */
+wm 32 0x00bb0038 0x000001b6
+
+/*
+ * NOC ReadLatency: (FIXME)
+ */
+wm 32 0x00bb0014 0x00000040
+
+/*
+ * NOC IPU1/IPU2 aging: (FIXME)
+ */
+wm 32 0x00bb0028 0x00000020
+wm 32 0x00bb002c 0x00000020
+
+wm 32 0x021b0000 MDCTL_4G
+// check 32 until_any_bit_set 0x021b0018 0x80000000
+
+/* DDR3 MR config */
+wm 32 0x021b001c DDR3_MR2_533MHZ_RTT_120
+
+/*
+ * DDR3 chip MR3, n = 3, vvvv = 0 (no configurable function of interest).
+ */
+wm 32 0x021b001c 0x00008033
+
+wm 32 0x021b001c DDR3_MR1_RTT_120_ODS_40
+wm 32 0x021b001c DDR3_MR0_533MHZ_CL7
+
+/*
+ * ZQ calibration, n = 0x10 (Precharge all):
+ * Bit 10 = 1: Start ZQ calibration
+ * REGISTER: 0x04008040
+ */
+wm 32 0x021b001c 0x04008040
+
+/* MPZQHWCTRL */
+wm 32 0x021b0800 0xa1390003 /* ZQ mode = 3 force calibration */
+wm 32 0x021b4800 0xa1390003
+
+wm 32 0x021b0020 MDREF_64KHZ
+
+wm 32 0x021b0818 MPODTCTRL_ODT_60
+wm 32 0x021b4818 MPODTCTRL_ODT_60
+
+wm 32 0x021b083c MPDGCTRL0_CH0_533MHZ
+wm 32 0x021b483c MPDGCTRL0_CH1_533MHZ
+
+wm 32 0x021b0840 MPDGCTRL1_CH0_533MHZ
+wm 32 0x021b4840 MPDGCTRL1_CH1_533MHZ
+
+/* MPRDDLCTL, MPWRDLCTL */
+wm 32 0x021b0848 0x40404040 /* TODO. Read delay line conf. */
+wm 32 0x021b4848 0x40404040 /* For now set all to 50%. */
+wm 32 0x021b0850 0x40404040
+wm 32 0x021b4850 0x40404040
+
+/* MPWLDECTRL0,1 */
+wm 32 0x021b080c 0x001f001f /* TODO. Write level delay control */
+wm 32 0x021b0810 0x001f001f
+wm 32 0x021b480c 0x001f001f
+wm 32 0x021b4810 0x001f001f
+
+/* MPMUR0 */
+wm 32 0x021b08b8 0x00000800 /* Force measurement on delay lines */
+wm 32 0x021b48b8 0x00000800
+
+/* MDSCR */
+wm 32 0x021b001c 0x00000000 /* Disable configuration req */
+
+/* MAPSR */
+wm 32 0x021b0404 0x00001006 /* Enable autorefresh */
+
+/* enable AXI cache for VDOA/PCIe/VPU/IPU */
+wm 32 0x020e0010 0xff0000cf
+/* set IPU AXI-id0 Qos=0xf(bypass AXI-id1 Qos=0x7) */
+wm 32 0x020e0018 0x007f007f
+wm 32 0x020e001c 0x007f007f
+
+/* DEBUG leds */
+wm 32 0x020e0244 0x00000005
+wm 32 0x020e0614 0x000130b0
+
+/* RGMII config */
+wm 32 0x020e0790 0x00080000 /* 1V2 DDR IO */
+wm 32 0x020e07ac 0x00000200 /* 60 Ohm ODT */
diff --git a/arch/arm/boards/protonic-imx6/lowlevel.c b/arch/arm/boards/protonic-imx6/lowlevel.c
new file mode 100644
index 0000000000..f5784cc6b1
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/lowlevel.c
@@ -0,0 +1,191 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (C) 2020 Protonic Holland
+ * Copyright (C) 2020 Oleksij Rempel, Pengutronix
+ */
+
+#include <asm/barebox-arm.h>
+#include <common.h>
+#include <mach/esdctl.h>
+#include <mach/generic.h>
+
+extern char __dtb_z_imx6q_prti6q_start[];
+extern char __dtb_z_imx6q_prtwd2_start[];
+extern char __dtb_z_imx6q_vicut1_start[];
+extern char __dtb_z_imx6dl_alti6p_start[];
+extern char __dtb_z_imx6dl_lanmcu_start[];
+extern char __dtb_z_imx6dl_plybas_start[];
+extern char __dtb_z_imx6dl_plym2m_start[];
+extern char __dtb_z_imx6dl_prtmvt_start[];
+extern char __dtb_z_imx6dl_prtrvt_start[];
+extern char __dtb_z_imx6dl_prtvt7_start[];
+extern char __dtb_z_imx6dl_victgo_start[];
+extern char __dtb_z_imx6dl_vicut1_start[];
+extern char __dtb_z_imx6qp_prtwd3_start[];
+extern char __dtb_z_imx6qp_vicutp_start[];
+extern char __dtb_z_imx6ul_prti6g_start[];
+
+ENTRY_FUNCTION(start_imx6q_prti6q, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6q_prti6q_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6q_prtwd2, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6q_prtwd2_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6q_vicut1, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6q_vicut1_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_alti6p, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_alti6p_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_lanmcu, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_lanmcu_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_plybas, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_plybas_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_plym2m, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_plym2m_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_prtmvt, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_prtmvt_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_prtrvt, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_prtrvt_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_prtvt7, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_prtvt7_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_victgo, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_victgo_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6dl_vicut1, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6dl_vicut1_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6qp_prtwd3, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6qp_prtwd3_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6qp_vicutp, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6qp_vicutp_start + get_runtime_offset();
+
+ imx6q_barebox_entry(fdt);
+}
+
+ENTRY_FUNCTION(start_imx6ul_prti6g, r0, r1, r2)
+{
+ void *fdt;
+
+ imx6ul_cpu_lowlevel_init();
+
+ fdt = __dtb_z_imx6ul_prti6g_start + get_runtime_offset();
+
+ imx6ul_barebox_entry(fdt);
+}
diff --git a/arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg b/arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg
new file mode 100644
index 0000000000..29c42cc697
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/lpddr2-defines.imxcfg
@@ -0,0 +1,384 @@
+/*
+ * Timing configuration:
+ *
+ * MDCFG0:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tRFC 2Gb 400MHz 0x3f (64) 24 0x3f000000
+ * 4Gb 400MHz 0x77 (120) 24 0x77000000
+ * 8Gb 400MHz 0x8b (140) 24 0x8b000000
+ * 2Gb 533MHz 0x55 (86) 24 0x55000000
+ * 4Gb 533MHz 0x9f (160) 24 0x9f000000
+ * 8Gb 533MHz 0xba (187) 24 0xba000000
+ * 4Gb LPDDR2 0x33 (52) 24 0x33000000
+ * tXS 2Gb 400MHz 0x43 (68) 16 0x00430000
+ * 4Gb 400MHz 0x7b (124) 16 0x007b0000
+ * 8Gb 400MHz 0x8f (144) 16 0x008f0000
+ * 2Gb 533MHz 0x5b (92) 16 0x005b0000
+ * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
+ * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
+ * 4Gb LPDDR2 0x37 (56) 16 0x00370000
+ * tXP * 400MHz 0x2 (3) 13 0x00004000
+ * * 533MHz 0x3 (4) 13 0x00006000
+ * * LPDDR2 0x2 (3) 13 0x00004000
+ * tXPDLL * 400MHz 0x9 (10) 9 0x00001200
+ * * 533MHz 0xc (13) 9 0x00001800
+ * * LPDDR2 0x1 (-) 9 0x00000200
+ * tFAW * 400MHz 0x13 (20) 4 0x00000130
+ * * 533MHz 0x1a (27) 4 0x000001a0
+ * * LPDDR2 0x13 (20) 4 0x00000130
+ * tCL * 400MHz 0x3 (6) 0 0x00000003
+ * * 533MHz-CL7 0x4 (7) 0 0x00000004
+ * * 533MHz-CL8 0x5 (8) 0 0x00000005
+ * * LPDDR2 0x3 (6) 0 0x00000003
+ * ----------------------------------------------------------------
+ */
+#define MDCFG0_2G_400MHZ 0x3f435333
+#define MDCFG0_4G_400MHZ 0x777b5333
+#define MDCFG0_8G_400MHZ 0x8b8f5333
+#define MDCFG0_2G_533MHZ_CL8 0x555b79a5
+#define MDCFG0_2G_533MHZ_CL7 0x555b79a4
+#define MDCFG0_4G_533MHZ_CL8 0x9fa579a5
+#define MDCFG0_4G_533MHZ_CL7 0x9fa579a4
+#define MDCFG0_8G_533MHZ_CL8 0xbac079a5
+#define MDCFG0_8G_533MHZ_CL7 0xbac079a4
+#define MDCFG0_4G_LPDDR2_CL6 0x33374133
+#define MDCFG0_8G_LPDDR2_CL6 0x53574133
+
+
+/*
+ * MDCFG1:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tRCD * 400MHz 0x5 (6) 28 0xa0000000
+ * * 533MHz 0x7 (8) 28 0xe0000000
+ * * LPDDR2 0x5 (-) 28 0xa0000000
+ * tRP * 400MHz 0x5 (6) 26 0x14000000
+ * * 533MHz 0x7 (8) 26 0x1c000000
+ * * LPDDR2 0x5 (-) 26 0x14000000
+ * tRC * 400MHz 0x14 (21) 21 0x02800000
+ * * 533MHz 0x1b (28) 21 0x03600000
+ * * LPDDR2 0x15 (-) 21 0x02a00000
+ * tRAS * 400MHz 0x0e (15) 16 0x000e0000
+ * * 533MHz 0x13 (20) 16 0x00130000
+ * * LPDDR2 0x10 (17) 16 0x00100000
+ * tRPA * 0x1 (tRP+1) 15 0x00008000
+ * RM rev 4: unused, read-only! 15 0x00000000
+ * tWR * 400MHz 0x5 (6) 9 0x00000a00
+ * * 533MHz 0x7 (8) 9 0x00000e00
+ * * LPDDR2 0x5 (6) 9 0x00000a00
+ * tMRD * 0x3 (4) 5 0x00000060
+ * max(tMRR,tMRW) LPDDR2 0x4 (5) 5 0x00000080
+ * tCWL * 400MHz 0x3 (5) 0 0x00000003
+ * * 533MHz 0x4 (6) 0 0x00000004
+ * tWL * LPDDR2 0x2 (3) 0 0x00000002
+ * ----------------------------------------------------------------
+ */
+#define MDCFG1_400MHZ 0xb68e8a63
+#define MDCFG1_533MHZ 0xff738e64
+#define MDCFG1_LPDDR2 0x00100a82
+
+/*
+ * MDCFG2:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tDLLK * 0x1ff (512) 16 0x01ff0000
+ * LPDDR2 0x0c7 (-) 16 0x00c70000
+ * tRTP * 0x3 (4) 6 0x000000c0
+ * LPDDR2 0x2 (3) 6 0x00000080
+ * tWTR * 0x3 (4) 3 0x00000018
+ * LPDDR2 0x2 (3) 3 0x00000010
+ * tRRD * 400MHz 0x3 (4) 0 0x00000003
+ * * 533MHz 0x5 (6) 0 0x00000005
+ * LPDDR2 0x3 (4) 0 0x00000003
+ * ----------------------------------------------------------------
+ */
+#define MDCFG2_400MHZ 0x01ff00db
+#define MDCFG2_533MHZ 0x01ff00dd
+#define MDCFG2_LPDDR2 0x00000093
+
+/*
+ * MDOR:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tXPR 2Gb 400MHz 0x43 (68) 16 0x00430000
+ * 4Gb 400MHz 0x7b (124) 16 0x007b0000
+ * 8Gb 400MHz 0x8f (144) 16 0x008f0000
+ * 2Gb 533MHz 0x5b (92) 16 0x005b0000
+ * 4Gb 533MHz 0xa5 (166) 16 0x00a50000
+ * 8Gb 533MHz 0xc0 (193) 16 0x00c00000
+ * * LPDDR2 0x9f (-) 16 0x009f0000
+ * SDE_to_RST * 0x10 (14) 8 0x00001000
+ * * LPDDR2 0xe (-) 8 0x00000e00
+ * RST_to_CKE * 0x23 (33) 0 0x00000023
+ * * LPDDR2 0x10 (14) 0 0x00000010
+ * ----------------------------------------------------------------
+ */
+#define MDOR_2G_400MHZ 0x00431023
+#define MDOR_4G_400MHZ 0x007b1023
+#define MDOR_8G_400MHZ 0x008f1023
+#define MDOR_2G_533MHZ 0x005b1023
+#define MDOR_4G_533MHZ 0x00a51023
+#define MDOR_8G_533MHZ 0x00c01023
+#define MDOR_LPDDR2 0x009f0e10
+
+/*
+ * MDOTC ODT delays:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * tAOFPD * 400MHz 0x3 (4) 27 0x18000000
+ * * 533MHz 0x4 (5) 27 0x20000000
+ * tAONPD * 400MHz 0x3 (4) 24 0x03000000
+ * * 533MHz 0x4 (5) 24 0x04000000
+ * tANPD * 400MHz 0x3 (4) 20 0x00300000
+ * * 533MHz 0x4 (5) 20 0x00400000
+ * tAXPD * 400MHz 0x3 (4) 16 0x00030000
+ * * 533MHz 0x4 (5) 16 0x00040000
+ * tODTLon * 400MHz 0x3 (3) 12 0x00003000
+ * * 533MHz 0x4 (4) 12 0x00004000
+ * tODTidle_off * 400MHz 0x3 (3) 4 0x00000030
+ * * 533MHz 0x4 (4) 4 0x00000040
+ * ----------------------------------------------------------------
+ */
+#define MDOTC_400MHZ 0x1b333030
+#define MDOTC_533MHZ 0x24444040
+/* LPDDR2: not relevant, leave in reset state!! */
+
+/*
+ * MDPDC:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * PRCT_1 * 0x0 28 0x00000000
+ * PRCT_0 * 0x0 24 0x00000000
+ * tCKE * 0x2 (3) 16 0x00020000
+ * PWDT_1 * 0x5 (256) 12 0x00005000
+ * PWDT_0 * 0x5 (256) 8 0x00000500
+ * SLOW_PD * 0x0 (0) 7 0x00000000
+ * BOTH_CS_PD * 0x1 (1) 6 0x00000040
+ * tCKSRX * 400MHz 0x5 (5) 3 0x00000028
+ * * 533MHz 0x6 (6) 3 0x00000030
+ * tCKSRE * 400MHz 0x5 (5) 0 0x00000005
+ * * 533MHz 0x6 (6) 0 0x00000006
+ * ----------------------------------------------------------------
+ */
+#define MDPDC_400MHZ 0x0002556d
+#define MDPDC_533MHZ 0x00025576
+#define MDPDC_LPDDR2 0x00025576 /* FIXME? */
+
+/*
+ * MDCTL:
+ * 2Gb: CS0 enable, 14bit ROW, 10bit COL, BL=8, 64bit data
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * SDE_0 * 0x1 (1) 31 0x80000000
+ * SDE_1 * 0x0 (0) 30 0x00000000
+ * SDE_1 LPDDR2 0x1 (1) 30 0x40000000
+ * ROW 2Gb * 0x3 (14) 24 0x03000000
+ * 4Gb * 0x4 (15) 24 0x04000000
+ * 8Gb * 0x5 (16) 24 0x05000000
+ * * LPDDR2 0x3 (14) 24 0x03000000
+ * COL * 0x1 (10) 20 0x00100000
+ * BL * 0x1 (8) 19 0x00080000
+ * LPDDR2 0x0 (4) 19 0x00000000
+ * DSIZ 64bit 0x2 (64) 16 0x00020000
+ * DSIZ 32bit 0x1 (32) 16 0x00010000
+ * DSIZ 16bit 0x0 (16) 16 0x00000000
+ * ----------------------------------------------------------------
+ */
+#define MDCTL_2G_16BIT 0x83180000
+#define MDCTL_2G_32BIT 0x83190000
+#define MDCTL_2G 0x831a0000
+#define MDCTL_4G_16BIT 0x84180000
+#define MDCTL_4G_32BIT 0x84190000
+#define MDCTL_4G 0x841a0000
+#define MDCTL_8G 0x851a0000
+#define MDCTL_LPDDR2 0x83110000
+
+
+/*
+ * MDASP Address space partitioning:
+ *
+ * At 0.25GiB, internal address space ends. Above that DDR3 should be
+ * located. The CS1/CS0 split-line determines where:
+ *
+ * For 1x2Gb chips (0.25GiB total on CS0): 0.5GiB
+ * For 2x4Gb chips (1GiB total on CS0): 1.25GiB
+ * For 4x2Gb chips (1GiB total on CS0): 1.25GiB
+ * For 4x4Gb chips (2GiB total on CS0): 2.25GiB
+ * For 4x8Gb chips (4GiB total on CS0): 4.00GiB (maximum possible,
+ * shadowed partially by internal address space).
+ *
+ * Register value Split
+ * ---------------------------
+ * 0x0000000f 0.5GiB
+ * 0x00000017 0.75GiB
+ * 0x00000027 1.25GiB
+ * 0x00000047 2.25GiB
+ * 0x0000007f 4.00GiB
+ */
+#define MDASP_512MIB 0x0000000f
+#define MDASP_768MIB 0x00000017
+#define MDASP_1GIB25 0x00000027
+#define MDASP_2GIB25 0x00000047
+#define MDASP_4GIB00 0x0000007f
+
+/*
+ * Initialize DDR3 chips
+ * MDSCR: Value = 0xvvvv803n, with 0xvvvv = value, n = Reg. number (BA)
+ */
+/*
+ * DDR3 chip MR2, n = 2:
+ *
+ * Par. Chip VALUE BITS vvvv
+ * ----------------------------------------------------------------
+ * Rtt(wr) * 0x0 (disabled) 10, 9 0x0000
+ * SR-Temp. * 0x1 (Extended) 7 0x0080
+ * Auto-SR * 0x0 (Manual) 6 0x0000
+ * CWL * 400MHz 0x0 (5tCK) 5, 4, 3 0x0000
+ * * 533MHz 0x1 (6tCK) 5, 4, 3 0x0008
+ * ----------------------------------------------------------------
+ */
+#define DDR3_MR2_400MHZ_RTT_OFF 0x00808032
+#define DDR3_MR2_533MHZ_RTT_OFF 0x00888032
+#define DDR3_MR2_400MHZ_RTT_120 0x04808032
+#define DDR3_MR2_533MHZ_RTT_120 0x04888032
+
+/*
+ * DDR3 chip MR1, n = 1:
+ *
+ * Par. Chip VALUE BITS vvvv
+ * ----------------------------------------------------------------
+ * Qoff * 0x0 (enabled) 12 0x0000
+ * TDQS * 0x0 (disabled) 11 0x0000
+ * Rtt * 0x0 (disabled) 9, 6, 2 0x0000
+ * Write-levelling * 0x0 (disable) 7 0x0000
+ * ODS * 0x0 (RZQ/6=40) 5, 1 0x0000
+ * DLL * 0x0 (enable) 0 0x0000
+ * ----------------------------------------------------------------
+ */
+#define DDR3_MR1_RTT_OFF_ODS_40 0x00008031
+#define DDR3_MR1_RTT_120_ODS_40 0x00408031
+#define DDR3_MR1_RTT_60_ODS_40 0x00048031
+#define DDR3_MR1_RTT_OFF_ODS_34 0x00028031
+#define DDR3_MR1_RTT_120_ODS_34 0x00428031
+#define DDR3_MR1_RTT_60_ODS_34 0x00068031
+
+/*
+ * DDR3 chip MR0, n = 0:
+ *
+ * Par. Chip VALUE BITS vvvv
+ * ----------------------------------------------------------------
+ * Precharge PD * 0x1 (fast exit) 12 0x1000
+ * WR 400MHz 0x2 (6) 11,10,9 0x0400
+ * 533MHz 0x4 (8) 11,10,9 0x0800
+ * DLL reset * 0x1 (Yes) 8 0x0100
+ * CL 400MHz 0x4 (6) 6,5,4,2 0x0020
+ * 533MHz 0x6 (7) 6,5,4,2 0x0030
+ * 533MHz 0x8 (8) 6,5,4,2 0x0040
+ * RD burst type * 0x0 (seq.) 3 0x0000
+ * BL * 0x0 (BL8) 0 0x0000
+ * ----------------------------------------------------------------
+ */
+#define DDR3_MR0_400MHZ 0x15208030
+#define DDR3_MR0_533MHZ_CL7 0x19308030
+#define DDR3_MR0_533MHZ_CL8 0x19408030
+
+
+/*
+ * MDREF:
+ * REF_SEL (bit 14,15): 0 (64kHz, needed for high-temp.)
+ * REFR (bit 11, 12, 13): 0x3 (4 refreshes) -> 0x00001800
+ * 0x7 (8 refreshes) -> 0x00003800
+ */
+#define MDREF_64KHZ 0x00001800
+#define MDREF_32KHZ 0x00007800
+
+/* MPODTCTRL */
+#define MPODTCTRL_ODT_OFF 0x00000007
+#define MPODTCTRL_ODT_120 0x00011117
+#define MPODTCTRL_ODT_60 0x00022227
+#define MPODTCTRL_ODT_40 0x00033337
+
+/*
+ * MPDGCTRL0:
+ *
+ * Channel 0:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * RST_RD_FIFO * 0 31 0x00000000
+ * DG_CMP_CYC * 1 30 0x40000000
+ * DG_DIS * 0 29 0x00000000
+ * HW_DG_EN * 0 28 0x00000000
+ * DG_HC_DEL1 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_EXT_UP * 0 23 0x00000000
+ * DG_DL_ABS_OFFS1 400MHz 0x35 16 0x00350000
+ * 533MHz 0x4b 16 0x004b0000
+ * DG_HC_DEL0 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS0 400MHz 0x35 0 0x00000031
+ * 533MHz 0x4b 0 0x00000050
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL0_CH0_400MHZ 0x42350231
+#define MPDGCTRL0_CH0_533MHZ 0x434b0350
+/*
+ *
+ * Channel 1:
+ *
+ * DG_HC_DEL1 (5) 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_DL_ABS_OFFS1 (5) 400MHz 0x35 16 0x00350000
+ * 533MHz 0x4b 16 0x004b0000
+ * DG_HC_DEL0 (4) 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS0 (4) 400MHz 0x35 0 0x00000031
+ * 533MHz 0x4b 0 0x00000050
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL0_CH1_400MHZ 0x42350231
+#define MPDGCTRL0_CH1_533MHZ 0x434b0350
+
+/*
+ * MPDGCTRL1:
+ *
+ * Channel 0:
+ *
+ * Par. Chip VALUE SHIFT Reg. field
+ * ----------------------------------------------------------------
+ * DG_HC_DEL3 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_DL_ABS_OFFS3 400MHz 0x1a 16 0x001a0000
+ * 533MHz 0x4c 16 0x004c0000
+ * DG_HC_DEL2 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS2 400MHz 0x18 0 0x00000018
+ * 533MHz 0x59 0 0x00000059
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL1_CH0_400MHZ 0x021a0218
+#define MPDGCTRL1_CH0_533MHZ 0x034c0359
+/*
+ *
+ * Channel 1:
+ *
+ * DG_HC_DEL3 (7) 400MHz 2 24 0x02000000
+ * 533MHz 3 24 0x03000000
+ * DG_DL_ABS_OFFS3 (7) 400MHz 0x1a 16 0x001a0000
+ * 533MHz 0x65 16 0x00650000
+ * DG_HC_DEL2 (6) 400MHz 2 8 0x00000200
+ * 533MHz 3 8 0x00000300
+ * DG_DL_ABS_OFFS2 (6) 400MHz 0x18 0 0x00000018
+ * 533MHz 0x48 0 0x00000048
+ * ----------------------------------------------------------------
+ */
+#define MPDGCTRL1_CH1_400MHZ 0x021a0218
+#define MPDGCTRL1_CH1_533MHZ 0x03650348
diff --git a/arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg b/arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg
new file mode 100644
index 0000000000..f60d37f63e
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/padsetup-dl.imxcfg
@@ -0,0 +1,70 @@
+
+/*
+ * Some defines for PAD setup:
+ * Unfortunately we don't have a powerful pre-processor, so we need to
+ * define explicit 32-bit hex values.
+ */
+#define PAD_DSE_48 0x00000028
+#define PAD_DSE_40 0x00000030
+
+#define PAD_DIFF_IN_DSE_48 0x00020028
+#define PAD_DIFF_IN_DSE_40 0x00020030
+#define PAD_DIFF_IN_DSE_34 0x00020038
+
+/* Disable ISB LED ASAP */
+wm 32 0x020e04a8 0x000130b0
+
+#define PAD_SDQS PAD_DSE_48
+wm 32 0x020e04bc PAD_SDQS /* SDQS0_P */
+wm 32 0x020e04c0 PAD_SDQS /* SDQS1_P */
+wm 32 0x020e04c4 PAD_SDQS /* SDQS2_P */
+wm 32 0x020e04c8 PAD_SDQS /* SDQS3_P */
+wm 32 0x020e04cc PAD_SDQS /* SDQS4_P */
+wm 32 0x020e04d0 PAD_SDQS /* SDQS5_P */
+wm 32 0x020e04d4 PAD_SDQS /* SDQS6_P */
+wm 32 0x020e04d8 PAD_SDQS /* SDQS7_P */
+
+#define PAD_DQM_CTRL PAD_DIFF_IN_DSE_48
+#define PAD_SDCLK PAD_DIFF_IN_DSE_40
+wm 32 0x020e0470 PAD_DQM_CTRL /* DQM0 */
+wm 32 0x020e0474 PAD_DQM_CTRL /* DQM1 */
+wm 32 0x020e0478 PAD_DQM_CTRL /* DQM2 */
+wm 32 0x020e047c PAD_DQM_CTRL /* DQM3 */
+wm 32 0x020e0480 PAD_DQM_CTRL /* DQM4 */
+wm 32 0x020e0484 PAD_DQM_CTRL /* DQM5 */
+wm 32 0x020e0488 PAD_DQM_CTRL /* DQM6 */
+wm 32 0x020e048c PAD_DQM_CTRL /* DQM7 */
+wm 32 0x020e0464 PAD_DQM_CTRL /* CAS */
+wm 32 0x020e0490 PAD_DQM_CTRL /* RAS */
+wm 32 0x020e04ac PAD_SDCLK /* SDCLK0_P */
+wm 32 0x020e04b0 PAD_SDCLK /* SDCLK1_P */
+wm 32 0x020e0494 PAD_DQM_CTRL /* RESET */
+
+/* 0x00003000 = 100k PU */
+wm 32 0x020e04a4 0x00003000 /* SDCKE0 */
+wm 32 0x020e04a8 0x00003000 /* SDCKE1 */
+wm 32 0x020e04a0 0x00000000 /* SDBA2: disable PU */
+
+/* 0x00003030 = PU + 40 Ohm drive */
+wm 32 0x020e04b4 0x00003030 /* ODT0 */
+wm 32 0x020e04b8 0x00003030 /* ODT1 */
+
+#define PAD_BxDS PAD_DSE_48
+wm 32 0x020e0764 PAD_BxDS /* B0DS */
+wm 32 0x020e0770 PAD_BxDS /* B1DS */
+wm 32 0x020e0778 PAD_BxDS /* B2DS */
+wm 32 0x020e077c PAD_BxDS /* B3DS */
+wm 32 0x020e0780 PAD_BxDS /* B4DS */
+wm 32 0x020e0784 PAD_BxDS /* B5DS */
+wm 32 0x020e078c PAD_BxDS /* B6DS */
+wm 32 0x020e0748 PAD_BxDS /* B7DS */
+wm 32 0x020e074c PAD_DSE_48 /* ADDDS */
+
+wm 32 0x020e0750 0x00020000 /* DDRMODE_CTL */
+wm 32 0x020e0754 0x00000000 /* DDRPKE disable PU */
+wm 32 0x020e0760 0x00020000 /* DDRMODE data */
+
+wm 32 0x020e076c 0x00000030 /* CTLDS 40 Ohm */
+
+wm 32 0x020e0774 0x000c0000 /* DDR_TYPE DDR3 */
+
diff --git a/arch/arm/boards/protonic-imx6/padsetup-q.imxcfg b/arch/arm/boards/protonic-imx6/padsetup-q.imxcfg
new file mode 100644
index 0000000000..f5fa3e8d28
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/padsetup-q.imxcfg
@@ -0,0 +1,69 @@
+
+/*
+ * Some defines for PAD setup:
+ * Unfortunately we don't have a powerful pre-processor, so we need to
+ * define explicit 32-bit hex values.
+ */
+#define PAD_DSE_48 0x00000028
+#define PAD_DSE_40 0x00000030
+
+#define PAD_DIFF_IN_DSE_48 0x00020028
+#define PAD_DIFF_IN_DSE_40 0x00020030
+#define PAD_DIFF_IN_DSE_34 0x00020038
+
+/* Disable ISB LED ASAP */
+wm 32 0x020e0420 0x000130b0
+
+#define PAD_SDQS PAD_DSE_48
+wm 32 0x020e05a8 PAD_SDQS /* SDQS0_P */
+wm 32 0x020e05b0 PAD_SDQS /* SDQS1_P */
+wm 32 0x020e0524 PAD_SDQS /* SDQS2_P */
+wm 32 0x020e051c PAD_SDQS /* SDQS3_P */
+wm 32 0x020e0518 PAD_SDQS /* SDQS4_P */
+wm 32 0x020e050c PAD_SDQS /* SDQS5_P */
+wm 32 0x020e05b8 PAD_SDQS /* SDQS6_P */
+wm 32 0x020e05c0 PAD_SDQS /* SDQS7_P */
+
+#define PAD_DQM_CTRL PAD_DIFF_IN_DSE_48
+#define PAD_SDCLK PAD_DIFF_IN_DSE_40
+wm 32 0x020e05ac PAD_DQM_CTRL /* DQM0 */
+wm 32 0x020e05b4 PAD_DQM_CTRL /* DQM1 */
+wm 32 0x020e0528 PAD_DQM_CTRL /* DQM2 */
+wm 32 0x020e0520 PAD_DQM_CTRL /* DQM3 */
+wm 32 0x020e0514 PAD_DQM_CTRL /* DQM4 */
+wm 32 0x020e0510 PAD_DQM_CTRL /* DQM5 */
+wm 32 0x020e05bc PAD_DQM_CTRL /* DQM6 */
+wm 32 0x020e05c4 PAD_DQM_CTRL /* DQM7 */
+wm 32 0x020e056c PAD_DQM_CTRL /* CAS */
+wm 32 0x020e0578 PAD_DQM_CTRL /* RAS */
+wm 32 0x020e0588 PAD_SDCLK /* SDCLK0_P */
+wm 32 0x020e0594 PAD_SDCLK /* SDCLK1_P */
+wm 32 0x020e057c PAD_DQM_CTRL /* RESET */
+
+/* 0x00003000 = 100k PU */
+wm 32 0x020e0590 0x00003000 /* SDCKE0 */
+wm 32 0x020e0598 0x00003000 /* SDCKE1 */
+wm 32 0x020e058c 0x00000000 /* SDBA2: disable PU */
+
+/* 0x00003030 = PU + 40 Ohm drive */
+wm 32 0x020e059c 0x00003030 /* ODT0 */
+wm 32 0x020e05a0 0x00003030 /* ODT1 */
+
+#define PAD_BxDS PAD_DSE_48
+wm 32 0x020e0784 PAD_BxDS /* B0DS */
+wm 32 0x020e0788 PAD_BxDS /* B1DS */
+wm 32 0x020e0794 PAD_BxDS /* B2DS */
+wm 32 0x020e079c PAD_BxDS /* B3DS */
+wm 32 0x020e07a0 PAD_BxDS /* B4DS */
+wm 32 0x020e07a4 PAD_BxDS /* B5DS */
+wm 32 0x020e07a8 PAD_BxDS /* B6DS */
+wm 32 0x020e0748 PAD_BxDS /* B7DS */
+wm 32 0x020e074c PAD_DSE_48 /* ADDDS */
+
+wm 32 0x020e0750 0x00020000 /* DDRMODE_CTL */
+wm 32 0x020e0758 0x00000000 /* DDRPKE disable PU */
+wm 32 0x020e0774 0x00020000 /* DDRMODE data */
+
+wm 32 0x020e078c 0x00000030 /* CTLDS 40 Ohm */
+
+wm 32 0x020e0798 0x000c0000 /* DDR_TYPE DDR3 */
diff --git a/arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg b/arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg
new file mode 100644
index 0000000000..e36601942d
--- /dev/null
+++ b/arch/arm/boards/protonic-imx6/padsetup-ul.imxcfg
@@ -0,0 +1,42 @@
+
+/*
+ * Some defines for PAD setup:
+ * Unfortunately we don't have a powerful pre-processor, so we need to
+ * define explicit 32-bit hex values.
+ */
+
+#define PAD_DSE_48 0x00000028
+#define PAD_DSE_40 0x00000030
+
+#define PAD_SDQS PAD_DSE_48
+wm 32 0x020e0280 PAD_SDQS /* SDQS0_P */
+wm 32 0x020e0284 PAD_SDQS /* SDQS1_P */
+
+#define PAD_DQM_CTRL PAD_DSE_48
+#define PAD_SDCLK PAD_DSE_48
+
+wm 32 0x020e0244 PAD_DQM_CTRL /* DQM0 */
+wm 32 0x020e0248 PAD_DQM_CTRL /* DQM1 */
+wm 32 0x020e024c PAD_DQM_CTRL /* RAS */
+wm 32 0x020e0250 PAD_DQM_CTRL /* CAS */
+wm 32 0x020e027c PAD_SDCLK /* SDCLK0_P */
+wm 32 0x020e0288 PAD_DQM_CTRL /* RESET */
+
+wm 32 0x020e0270 0x00000000 /* SDBA2: disable PU */
+
+wm 32 0x020e0260 PAD_DSE_48 /* ODT0 */
+wm 32 0x020e0264 PAD_DSE_48 /* ODT1 */
+
+#define PAD_BxDS PAD_DSE_48
+wm 32 0x020e0498 PAD_BxDS /* B0DS */
+wm 32 0x020e04a4 PAD_BxDS /* B1DS */
+
+wm 32 0x020e0490 PAD_DSE_48 /* ADDDS */
+
+wm 32 0x020e0494 0x00020000 /* DDRMODE_CTL */
+wm 32 0x020e04ac 0x00000000 /* DDRPKE disable PU */
+wm 32 0x020e04b0 0x00020000 /* DDRMODE data */
+
+wm 32 0x020e04a0 0x00000030 /* CTLDS 40 Ohm */
+
+wm 32 0x020e04b4 0x000c0000 /* DDR_TYPE DDR3 */
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index 1aeaa61e01..8afeb45016 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -74,6 +74,22 @@ lwl-dtb-$(CONFIG_MACH_PHYTEC_PHYCORE_IMX7) += imx7d-phyboard-zeta.dtb.o
lwl-dtb-$(CONFIG_MACH_PHYTEC_SOM_IMX8MQ) += imx8mq-phytec-phycore-som.dtb.o
lwl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_AX3) += armada-xp-openblocks-ax3-4-bb.dtb.o
lwl-dtb-$(CONFIG_MACH_PLATHOME_OPENBLOCKS_A6) += kirkwood-openblocks_a6-bb.dtb.o
+lwl-dtb-$(CONFIG_MACH_PROTONIC_IMX6) += \
+ imx6q-prti6q.dtb.o \
+ imx6q-prtwd2.dtb.o \
+ imx6q-vicut1.dtb.o \
+ imx6dl-alti6p.dtb.o \
+ imx6dl-lanmcu.dtb.o \
+ imx6dl-plybas.dtb.o \
+ imx6dl-plym2m.dtb.o \
+ imx6dl-prtmvt.dtb.o \
+ imx6dl-prtrvt.dtb.o \
+ imx6dl-prtvt7.dtb.o \
+ imx6dl-victgo.dtb.o \
+ imx6dl-vicut1.dtb.o \
+ imx6qp-prtwd3.dtb.o \
+ imx6qp-vicutp.dtb.o \
+ imx6ul-prti6g.dtb.o
lwl-dtb-$(CONFIG_MACH_RADXA_ROCK) += rk3188-radxarock.dtb.o
lwl-dtb-$(CONFIG_MACH_PHYTEC_SOM_RK3288) += rk3288-phycore-som.dtb.o
lwl-dtb-$(CONFIG_MACH_REALQ7) += imx6q-dmo-edmqmx6.dtb.o
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 6dd5cb2aca..77b39e07bb 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -336,6 +336,12 @@ config MACH_PHYTEC_SOM_IMX6
select ARCH_IMX6
select ARCH_IMX6UL
+config MACH_PROTONIC_IMX6
+ bool "Protonic-Holland i.MX6 based boards"
+ select ARCH_IMX6
+ select ARCH_IMX6UL
+ select ARM_USE_COMPRESSED_DTB
+
config MACH_KONTRON_SAMX6I
bool "Kontron sAMX6i"
select ARCH_IMX6
diff --git a/images/Makefile.imx b/images/Makefile.imx
index 765702f26d..d8879e314f 100644
--- a/images/Makefile.imx
+++ b/images/Makefile.imx
@@ -299,6 +299,34 @@ $(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx
$(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx6dl_som_lc_emmc_1gib, phytec-som-imx6/flash-header-phytec-pcm058dl-1gib, phytec-phycore-imx6dl-som-lc-emmc-1gib)
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6q_prti6q, protonic-imx6/flash-header-prti6q, protonic-prti6q)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6q_prtwd2, protonic-imx6/flash-header-prtwd2, protonic-prtwd2)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6q_vicut1, protonic-imx6/flash-header-vicut1q, protonic-vicut1q)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_alti6p, protonic-imx6/flash-header-alti6p, protonic-alti6p)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_lanmcu, protonic-imx6/flash-header-lanmcu, protonic-lanmcu)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_plybas, protonic-imx6/flash-header-plybas, protonic-plybas)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_plym2m, protonic-imx6/flash-header-plym2m, protonic-plym2m)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_prtmvt, protonic-imx6/flash-header-prtmvt, protonic-prtmvt)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_prtrvt, protonic-imx6/flash-header-prtrvt, protonic-prtrvt)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_prtvt7, protonic-imx6/flash-header-prtvt7, protonic-prtvt7)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_victgo, protonic-imx6/flash-header-victgo, protonic-victgo)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6dl_vicut1, protonic-imx6/flash-header-vicut1, protonic-vicut1)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6qp_prtwd3, protonic-imx6/flash-header-prtwd3, protonic-prtwd3)
+
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6qp_vicutp, protonic-imx6/flash-header-vicutp, protonic-vicutp)
+
$(call build_imx_habv4img, CONFIG_MACH_KONTRON_SAMX6I, start_imx6q_samx6i, kontron-samx6i/flash-header-samx6i-quad, imx6q-samx6i)
$(call build_imx_habv4img, CONFIG_MACH_KONTRON_SAMX6I, start_imx6dl_samx6i, kontron-samx6i/flash-header-samx6i-duallite, imx6dl-samx6i)
@@ -326,6 +354,8 @@ $(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx
$(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx6ull_som_emmc_512mb, phytec-som-imx6/flash-header-phytec-pcl063-512mb, phytec-phycore-imx6ull-emmc-512mb)
+$(call build_imx_habv4img, CONFIG_MACH_PROTONIC_IMX6, start_imx6ul_prti6g, protonic-imx6/flash-header-prti6g, protonic-prti6g)
+
$(call build_imx_habv4img, CONFIG_MACH_TECHNEXION_PICO_HOBBIT, start_imx6ul_pico_hobbit_256mb, technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-256, imx6ul-pico-hobbit-256mb)
$(call build_imx_habv4img, CONFIG_MACH_TECHNEXION_PICO_HOBBIT, start_imx6ul_pico_hobbit_512mb, technexion-pico-hobbit/flash-header-imx6ul-pico-hobbit-512, imx6ul-pico-hobbit-512mb)
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: [PATCH v2 0/2] transfer Protonic barebox development to the mainline
2020-06-16 5:52 [PATCH v2 0/2] transfer Protonic barebox development to the mainline Oleksij Rempel
2020-06-16 5:52 ` [PATCH v2 1/2] ARM: dts: imx6: add Protonic boards Oleksij Rempel
2020-06-16 5:52 ` [PATCH v2 2/2] ARM: add imx6 based Protonic boads Oleksij Rempel
@ 2020-06-18 12:58 ` Sascha Hauer
2 siblings, 0 replies; 4+ messages in thread
From: Sascha Hauer @ 2020-06-18 12:58 UTC (permalink / raw)
To: Oleksij Rempel; +Cc: barebox, David Jander
On Tue, Jun 16, 2020 at 07:52:00AM +0200, Oleksij Rempel wrote:
> This is initial patch set to transfer Protonic barebox development to the mainline.
> Most important changes of this patches are in
> arch/arm/boards/protonic-imx6 folder. The devicetrees are mostly
> unchanged, since they will be replaced by kernel version soon.
>
> changes v2:
> - use imx6_cpu_lowlevel_init instead of arm_cpu_lowlevel_init
> - use imx6q_barebox_entry instead of barebox_arm_entry
> - remove debug_ll. Currently it is not needed
> - remove part of pinmuxing from DCD files
>
> Oleksij Rempel (2):
> ARM: dts: imx6: add Protonic boards
> ARM: add imx6 based Protonic boads
Applied, thanks
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2020-06-18 12:58 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-16 5:52 [PATCH v2 0/2] transfer Protonic barebox development to the mainline Oleksij Rempel
2020-06-16 5:52 ` [PATCH v2 1/2] ARM: dts: imx6: add Protonic boards Oleksij Rempel
2020-06-16 5:52 ` [PATCH v2 2/2] ARM: add imx6 based Protonic boads Oleksij Rempel
2020-06-18 12:58 ` [PATCH v2 0/2] transfer Protonic barebox development to the mainline Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox