From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 14/20] mfd: Add pca9440 register map
Date: Tue, 23 Jun 2020 15:16:00 +0200 [thread overview]
Message-ID: <20200623131606.16316-15-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20200623131606.16316-1-s.hauer@pengutronix.de>
The pca9440 is a PMIC found on the i.MX8MP-EVK board. This adds the
register map for it.
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/mfd/pca9450.h | 55 +++++++++++++++++++++++++++++++++++++++++++
1 file changed, 55 insertions(+)
create mode 100644 include/mfd/pca9450.h
diff --git a/include/mfd/pca9450.h b/include/mfd/pca9450.h
new file mode 100644
index 0000000000..256f661911
--- /dev/null
+++ b/include/mfd/pca9450.h
@@ -0,0 +1,55 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright 2019 NXP
+ */
+
+#ifndef PCA9450_H_
+#define PCA9450_H_
+
+enum {
+ PCA9450_REG_DEV_ID = 0x00,
+ PCA9450_INT1 = 0x01,
+ PCA9450_INT1_MSK = 0x02,
+ PCA9450_STATUS1 = 0x03,
+ PCA9450_STATUS2 = 0x04,
+ PCA9450_PWRON_STAT = 0x05,
+ PCA9450_SW_RST = 0x06,
+ PCA9450_PWR_CTRL = 0x07,
+ PCA9450_RESET_CTRL = 0x08,
+ PCA9450_CONFIG1 = 0x09,
+ PCA9450_CONFIG2 = 0x0A,
+ PCA9450_BUCK123_DVS = 0x0C,
+ PCA9450_BUCK1OUT_LIMIT = 0x0D,
+ PCA9450_BUCK2OUT_LIMIT = 0x0E,
+ PCA9450_BUCK3OUT_LIMIT = 0x0F,
+ PCA9450_BUCK1CTRL = 0x10,
+ PCA9450_BUCK1OUT_DVS0 = 0x11,
+ PCA9450_BUCK1OUT_DVS1 = 0x12,
+ PCA9450_BUCK2CTRL = 0x13,
+ PCA9450_BUCK2OUT_DVS0 = 0x14,
+ PCA9450_BUCK2OUT_DVS1 = 0x15,
+ PCA9450_BUCK3CTRL = 0x16,
+ PCA9450_BUCK3OUT_DVS0 = 0x17,
+ PCA9450_BUCK3OUT_DVS1 = 0x18,
+ PCA9450_BUCK4CTRL = 0x19,
+ PCA9450_BUCK4OUT = 0x1A,
+ PCA9450_BUCK5CTRL = 0x1B,
+ PCA9450_BUCK5OUT = 0x1C,
+ PCA9450_BUCK6CTRL = 0x1D,
+ PCA9450_BUCK6OUT = 0x1E,
+ PCA9450_LDO_AD_CTRL = 0x20,
+ PCA9450_LDO1CTRL = 0x21,
+ PCA9450_LDO2CTRL = 0x22,
+ PCA9450_LDO3CTRL = 0x23,
+ PCA9450_LDO4CTRL = 0x24,
+ PCA9450_LDO5CTRL_L = 0x25,
+ PCA9450_LDO5CTRL_H = 0x26,
+ PCA9450_LOADSW_CTRL = 0x2A,
+ PCA9450_VRFLT1_STS = 0x2B,
+ PCA9450_VRFLT2_STS = 0x2C,
+ PCA9450_VRFLT1_MASK = 0x2D,
+ PCA9450_VRFLT2_MASK = 0x2E,
+ PCA9450_REG_NUM,
+};
+
+#endif
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-06-23 13:16 UTC|newest]
Thread overview: 21+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-06-23 13:15 [PATCH 00/20] i.MX8MP support Sascha Hauer
2020-06-23 13:15 ` [PATCH 01/20] scripts: imx-image: Only set DCD pointer when we have DCD data Sascha Hauer
2020-06-23 13:15 ` [PATCH 02/20] scripts: imx-image: exit on read/write failures Sascha Hauer
2020-06-23 13:15 ` [PATCH 03/20] scripts: imx-image: Add extra code path for i.MX35 Sascha Hauer
2020-06-23 13:15 ` [PATCH 04/20] scripts: imx-image: exit with error when barebox header conflicts with IVT Sascha Hauer
2020-06-23 13:15 ` [PATCH 05/20] scripts: imx-image: Fix writing image with IVT offset = 0 Sascha Hauer
2020-06-23 13:15 ` [PATCH 06/20] scripts: imx-image: rename image_dcd_offset to image_ivt_offset Sascha Hauer
2020-06-23 13:15 ` [PATCH 07/20] scripts: imx-image: rename dcdofs to ivtofs Sascha Hauer
2020-06-23 13:15 ` [PATCH 08/20] serial: i.MX: Add i.MX8MP compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 09/20] pinctrl: imx-iomux-v3: " Sascha Hauer
2020-06-23 13:15 ` [PATCH 10/20] net: fec_imx: add fsl,imx8mp-fec compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 11/20] mci: imx-esdhc: Add i.MX8mp compatible Sascha Hauer
2020-06-23 13:15 ` [PATCH 12/20] arm: imx: add initial imx8mp support Sascha Hauer
2020-06-23 13:15 ` [PATCH 13/20] scripts: imx-image: Add i.MX8MP support Sascha Hauer
2020-06-23 13:16 ` Sascha Hauer [this message]
2020-06-23 13:16 ` [PATCH 15/20] clk: imx: Add imx8mp clk driver Sascha Hauer
2020-06-23 13:16 ` [PATCH 16/20] mci: imx-esdhc-pbl: Add imx8mp_esdhc_load_image() for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` [PATCH 17/20] net: phy: realtek: handle RX delay setting Sascha Hauer
2020-06-23 13:16 ` [PATCH 18/20] ARM: i.MX: bbu: Fix IVT offset for i.MX8MP Sascha Hauer
2020-06-23 13:16 ` [PATCH 19/20] ARM: i.MX8MP: Add ocotp support Sascha Hauer
2020-06-23 13:16 ` [PATCH 20/20] arm: boards: add initial imx8mp-evk support Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200623131606.16316-15-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox