[PATCH 0/4] dts: clean up and a fix

[PATCH 0/4] dts: clean up and a fix

[Ahmad Fatoum]

Hello Sascha,

the vexpress changed paths, again, so building now fails. Fortunately[1],
a label: had been introduced meanwhile, that we could use. This is what
the first patch does. Please order it before the v5.8-rc1 sync, so we
don't have intermittent build breakage[2].

The other three patches remove code that became obsolete with the device
tree sync.

[1]: The same patch adding the label, also added the partitions node,
     which broke barebox on the board, but that's a different issue..
[2]: We probably want a make dtbs target to spot such issues and fix
     them up into the same commit if needed

Cheers
Ahmad Fatoum (4):
  ARM: vexpress: dts: use direct &phandle instead of &{/path}
  ARM: stm32mp: dts: extend now upstream stm32mp157c-lxa-mc1.dts
  clk: at91: remove no-longer needed dt-compat code
  clk: at91: remove now-duplicate crutch #defines

 arch/arm/dts/stm32mp157c-lxa-mc1.dts  |   2 +-
 arch/arm/dts/stm32mp157c-lxa-mc1.dtsi | 362 -------------
 arch/arm/dts/stm32mp15xx-osd32.dtsi   | 229 --------
 arch/arm/dts/vexpress-v2p-ca15.dts    |   2 +-
 drivers/clk/at91/Makefile             |  10 +-
 drivers/clk/at91/dt-compat.c          | 727 --------------------------
 drivers/clk/at91/pmc.h                |   6 -
 7 files changed, 7 insertions(+), 1331 deletions(-)
 delete mode 100644 arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
 delete mode 100644 arch/arm/dts/stm32mp15xx-osd32.dtsi
 delete mode 100644 drivers/clk/at91/dt-compat.c

-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 1/4] ARM: vexpress: dts: use direct &phandle instead of &{/path}

[Ahmad Fatoum]

6940ba22c66a ("dts: update to v5.3-rc1") added a label that we can
reference instead of relying on the path not changing. Make use of it,
so the compilation doesn't fail along with the v5.8-rc1 dts/ sync.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
[afa: board is still broken, because the "arm,arm-firmware-suite"
partitioning is unknown to barebox, but at least it's not doubly
broken.]
---
 arch/arm/dts/vexpress-v2p-ca15.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/dts/vexpress-v2p-ca15.dts b/arch/arm/dts/vexpress-v2p-ca15.dts
index a4cdc8d1f5f0..d02b8ce523cf 100644
--- a/arch/arm/dts/vexpress-v2p-ca15.dts
+++ b/arch/arm/dts/vexpress-v2p-ca15.dts
@@ -7,7 +7,7 @@
 	};
 };
 
-&{/bus@8000000/motherboard/flash@0,00000000} {
+&nor_flash {
 	#address-cells = <1>;
 	#size-cells = <1>;
 
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 2/4] ARM: stm32mp: dts: extend now upstream stm32mp157c-lxa-mc1.dts

[Ahmad Fatoum]

With the recent v5.8-rc1 device tree sync, we can drop everything but
the barebox-specific parts from the barebox device tree.
The rest now comes from the upstream device tree.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 arch/arm/dts/stm32mp157c-lxa-mc1.dts  |   2 +-
 arch/arm/dts/stm32mp157c-lxa-mc1.dtsi | 362 --------------------------
 arch/arm/dts/stm32mp15xx-osd32.dtsi   | 229 ----------------
 3 files changed, 1 insertion(+), 592 deletions(-)
 delete mode 100644 arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
 delete mode 100644 arch/arm/dts/stm32mp15xx-osd32.dtsi

diff --git a/arch/arm/dts/stm32mp157c-lxa-mc1.dts b/arch/arm/dts/stm32mp157c-lxa-mc1.dts
index 57baaf4005d2..f89c0852809e 100644
--- a/arch/arm/dts/stm32mp157c-lxa-mc1.dts
+++ b/arch/arm/dts/stm32mp157c-lxa-mc1.dts
@@ -3,7 +3,7 @@
  * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
  */
 
-#include "stm32mp157c-lxa-mc1.dtsi"
+#include <arm/stm32mp157c-lxa-mc1.dts>
 #include "stm32mp151.dtsi"
 
 / {
diff --git a/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi b/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
deleted file mode 100644
index 6603cf280eb2..000000000000
--- a/arch/arm/dts/stm32mp157c-lxa-mc1.dtsi
+++ /dev/null
@@ -1,362 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
- * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
- */
-
-/dts-v1/;
-
-#include <arm/stm32mp157.dtsi>
-#include "stm32mp15xx-osd32.dtsi"
-#include <arm/stm32mp15xxac-pinctrl.dtsi>
-
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/pwm/pwm.h>
-
-/ {
-	model = "Linux Automation MC-1 board";
-	compatible = "lxa,stm32mp157c-mc1", "st,stm32mp157";
-
-	aliases {
-		ethernet0 = &ethernet0;
-		mmc0 = &sdmmc1;
-		mmc1 = &sdmmc2;
-		serial0 = &uart4;
-	};
-
-	backlight: backlight {
-		compatible = "pwm-backlight";
-		pwms = <&backlight_pwm 1 100000 PWM_POLARITY_INVERTED>;
-		brightness-levels = <0 31 63 95 127 159 191 223 255>;
-		default-brightness-level = <7>;
-		power-supply = <&reg_5v2>; /* 3V3_BACKLIGHT */
-	};
-
-	chosen {
-		stdout-path = &uart4;
-	};
-
-	led-act {
-		compatible = "gpio-leds";
-
-		led-green {
-			label = "mc1:green:act";
-			gpios = <&gpioa 13 GPIO_ACTIVE_LOW>;
-			linux,default-trigger = "heartbeat";
-		};
-	};
-
-	led-rgb {
-		compatible = "pwm-leds";
-
-		led-red {
-			label = "mc1:red:rgb";
-			pwms = <&leds_pwm 1 1000000 0>;
-			max-brightness = <255>;
-			active-low;
-		};
-
-		led-green {
-			label = "mc1:green:rgb";
-			pwms = <&leds_pwm 2 1000000 0>;
-			max-brightness = <255>;
-			active-low;
-		};
-
-		led-blue {
-			label = "mc1:blue:rgb";
-			pwms = <&leds_pwm 3 1000000 0>;
-			max-brightness = <255>;
-			active-low;
-		};
-	};
-
-	panel: panel {
-		compatible = "edt,etm0700g0edh6", "simple-panel";
-		backlight = <&backlight>;
-		enable-gpios = <&gpiod 4 GPIO_ACTIVE_HIGH>;
-		power-supply = <&reg_3v3>;
-
-		port {
-			panel_input: endpoint {
-				remote-endpoint = <&ltdc_ep0_out>;
-			};
-		};
-	};
-
-	reg_3v3: regulator_3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "3V3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		regulator-always-on;
-		vin-supply = <&v3v3>;
-	};
-
-	/* supplied by either debug board or PoE */
-	reg_5v2: regulator_5v2 {
-		compatible = "regulator-fixed";
-		regulator-name = "5V2";
-		regulator-min-microvolt = <5200000>;
-		regulator-max-microvolt = <5200000>;
-		regulator-always-on;
-	};
-};
-
-&ethernet0 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ethernet0_rgmii_mc1pins_b>;
-	phy-mode = "rgmii-id";
-	phy-handle = <&ethphy>;
-	status = "okay";
-
-	mdio0 {
-		compatible = "snps,dwmac-mdio";
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		ethphy: ethernet-phy@3 { /* KSZ9031RN */
-			reg = <3>;
-			reset-gpios = <&gpiog 0 GPIO_ACTIVE_LOW>; /* ETH_RST# */
-			interrupt-parent = <&gpioa>;
-			interrupts = <6 IRQ_TYPE_EDGE_FALLING>; /* ETH_MDINT# */
-			rxc-skew-ps = <1860>;
-			txc-skew-ps = <1860>;
-			reset-assert-us = <10000>;
-			reset-deassert-us = <300>;
-			micrel,force-master;
-		};
-	};
-};
-
-&gpioz {
-	gpio-line-names = "HWID0", "HWID1", "HWID2", "HWID3", "", "",
-			  "HWID4", "HWID5";
-};
-
-&gpu {
-	status = "okay";
-};
-
-&i2c5 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c5_mc1pins_b>;
-	clock-frequency = <400000>;
-	status = "okay";
-
-	touchscreen@38 {
-		compatible = "edt,edt-ft5x06";
-		interrupt-parent = <&gpiod>;
-		interrupts = <11 IRQ_TYPE_EDGE_FALLING>; /* TOUCH_INT# */
-		vcc-supply = <&reg_3v3>;
-		reg = <0x38>;
-		reset-gpios = <&gpiof 8 GPIO_ACTIVE_LOW>; /* TOUCH_RESET# */
-		touchscreen-size-x = <1792>;
-		touchscreen-size-y = <1024>;
-		wakeup-source;
-	};
-};
-
-&ltdc {
-	pinctrl-names = "default";
-	pinctrl-0 = <&ltdc_mc1pins_c>;
-	status = "okay";
-
-	port {
-		#address-cells = <1>;
-		#size-cells = <0>;
-		ltdc_ep0_out: endpoint@0 {
-			reg = <0>;
-			remote-endpoint = <&panel_input>;
-		};
-	};
-};
-
-&pmic {
-	regulators {
-		buck4-supply = <&reg_5v2>;	/* VIN */
-		ldo2-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
-		ldo5-supply = <&reg_5v2>;	/* PMIC_LDO25IN */
-		boost-supply = <&reg_5v2>;	/* PMIC_BSTIN */
-		pwr_sw2-supply = <&bst_out>;    /* PMIC_SWIN */
-	};
-};
-
-&sdmmc1 {
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdmmc1_b4_pins_a>;
-	pinctrl-1 = <&sdmmc1_b4_od_pins_a>;
-	bus-width = <4>;
-	cd-gpios = <&gpioh 3 GPIO_ACTIVE_LOW>;
-	disable-wp;
-	no-1-8-v;
-	st,neg-edge;
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&sdmmc1_b4_pins_a {
-	/*
-	 * board lacks external pull-ups on SDMMC lines. Class 10 SD refuses to
-	 * work, thus enable internal pull-ups.
-	 */
-	pins1 {
-		/delete-property/ bias-disable;
-		bias-pull-up;
-	};
-	pins2 {
-		/delete-property/ bias-disable;
-		bias-pull-up;
-	};
-};
-
-&sdmmc2 {
-	pinctrl-names = "default", "opendrain";
-	pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_mc1pins_b>;
-	pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_mc1pins_b>;
-	bus-width = <8>;
-	no-1-8-v;
-	no-sd;
-	no-sdio;
-	non-removable;
-	st,neg-edge;
-	vmmc-supply = <&reg_3v3>;
-	status = "okay";
-};
-
-&timers3 {
-	status = "okay";
-
-	backlight_pwm: pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm3_mc1pins_b>;
-		status = "okay";
-	};
-};
-
-&timers5 {
-	status = "okay";
-
-	leds_pwm: pwm {
-		pinctrl-names = "default";
-		pinctrl-0 = <&pwm5_mc1pins_b>;
-		status = "okay";
-	};
-};
-
-&uart4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&uart4_pins_a>;
-	status = "okay";
-};
-
-&pinctrl {
-	ethernet0_rgmii_mc1pins_b: mc1-rgmii-1 {
-		pins1 {
-			pinmux = <STM32_PINMUX('G', 5, AF11)>, /* ETH_RGMII_CLK125 */
-				 <STM32_PINMUX('G', 4, AF11)>, /* ETH_RGMII_GTX_CLK */
-				 <STM32_PINMUX('G', 13, AF11)>, /* ETH_RGMII_TXD0 */
-				 <STM32_PINMUX('G', 14, AF11)>, /* ETH_RGMII_TXD1 */
-				 <STM32_PINMUX('C', 2, AF11)>, /* ETH_RGMII_TXD2 */
-				 <STM32_PINMUX('E', 2, AF11)>, /* ETH_RGMII_TXD3 */
-				 <STM32_PINMUX('B', 11, AF11)>, /* ETH_RGMII_TX_CTL */
-				 <STM32_PINMUX('C', 1, AF11)>; /* ETH_MDC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <2>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('A', 2, AF11)>; /* ETH_MDIO */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins3 {
-			pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH_RGMII_RXD0 */
-				 <STM32_PINMUX('C', 5, AF11)>, /* ETH_RGMII_RXD1 */
-				 <STM32_PINMUX('H', 6, AF11)>, /* ETH_RGMII_RXD2 */
-				 <STM32_PINMUX('H', 7, AF11)>, /* ETH_RGMII_RXD3 */
-				 <STM32_PINMUX('A', 1, AF11)>, /* ETH_RGMII_RX_CLK */
-				 <STM32_PINMUX('A', 7, AF11)>; /* ETH_RGMII_RX_CTL */
-			bias-disable;
-		};
-	};
-
-	i2c5_mc1pins_b: mc1-i2c5-1 {
-		pins {
-			pinmux = <STM32_PINMUX('D', 0, AF4)>, /* I2C5_SCL */
-			         <STM32_PINMUX('D', 1, AF4)>; /* I2C5_SDA */
-			bias-disable;
-			drive-open-drain;
-			slew-rate = <0>;
-		};
-	};
-
-	ltdc_mc1pins_c: mc1-ltdc-2 {
-		pins1 {
-			pinmux = <STM32_PINMUX('B',  1, AF9)>,  /* LTDC_R6 */
-				 <STM32_PINMUX('B',  9, AF14)>, /* LTDC_B7 */
-				 <STM32_PINMUX('C',  0, AF14)>, /* LTDC_R5 */
-				 <STM32_PINMUX('D',  3, AF14)>, /* LTDC_G7 */
-				 <STM32_PINMUX('D',  6, AF14)>, /* LTDC_B2 */
-				 <STM32_PINMUX('D', 10, AF14)>, /* LTDC_B3 */
-				 <STM32_PINMUX('E', 11, AF14)>, /* LTDC_G3 */
-				 <STM32_PINMUX('E', 12, AF14)>, /* LTDC_B4 */
-				 <STM32_PINMUX('E', 13, AF14)>, /* LTDC_DE */
-				 <STM32_PINMUX('E', 15, AF14)>, /* LTDC_R7 */
-				 <STM32_PINMUX('H',  4, AF9)>,  /* LTDC_G5 */
-				 <STM32_PINMUX('H',  8, AF14)>, /* LTDC_R2 */
-				 <STM32_PINMUX('H',  9, AF14)>, /* LTDC_R3 */
-				 <STM32_PINMUX('H', 10, AF14)>, /* LTDC_R4 */
-				 <STM32_PINMUX('H', 13, AF14)>, /* LTDC_G2 */
-				 <STM32_PINMUX('H', 15, AF14)>, /* LTDC_G4 */
-				 <STM32_PINMUX('I',  1, AF14)>, /* LTDC_G6 */
-				 <STM32_PINMUX('I',  5, AF14)>, /* LTDC_B5 */
-				 <STM32_PINMUX('I',  6, AF14)>, /* LTDC_B6 */
-				 <STM32_PINMUX('I',  9, AF14)>, /* LTDC_VSYNC */
-				 <STM32_PINMUX('I', 10, AF14)>; /* LTDC_HSYNC */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-		pins2 {
-			pinmux = <STM32_PINMUX('E', 14, AF14)>; /* LTDC_CLK */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <1>;
-		};
-	};
-
-	pwm3_mc1pins_b: mc1-pwm3-1 {
-		pins {
-			pinmux = <STM32_PINMUX('B', 5, AF2)>; /* TIM3_CH2 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	pwm5_mc1pins_b: mc1-pwm5-1 {
-		pins {
-			pinmux = <STM32_PINMUX('H', 11, AF2)>, /* TIM5_CH2 */
-				 <STM32_PINMUX('H', 12, AF2)>, /* TIM5_CH3 */
-				 <STM32_PINMUX('I', 0, AF2)>; /* TIM5_CH4 */
-			bias-disable;
-			drive-push-pull;
-			slew-rate = <0>;
-		};
-	};
-
-	sdmmc2_d47_mc1pins_b: mc1-sdmmc2-d47-1 {
-		pins {
-			pinmux = <STM32_PINMUX('A', 8, AF9)>,  /* SDMMC2_D4 */
-				 <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */
-				 <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */
-				 <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */
-			slew-rate = <1>;
-			drive-push-pull;
-			bias-disable;
-		};
-	};
-
-};
diff --git a/arch/arm/dts/stm32mp15xx-osd32.dtsi b/arch/arm/dts/stm32mp15xx-osd32.dtsi
deleted file mode 100644
index 87508350339e..000000000000
--- a/arch/arm/dts/stm32mp15xx-osd32.dtsi
+++ /dev/null
@@ -1,229 +0,0 @@
-/* SPDX-License-Identifier: (GPL-2.0-or-later OR BSD-3-Clause) */
-/*
- * Copyright (C) 2020 STMicroelectronics - All Rights Reserved
- * Copyright (C) 2020 Ahmad Fatoum, Pengutronix
- */
-
-#include <arm/stm32mp15-pinctrl.dtsi>
-
-#include <dt-bindings/mfd/st,stpmic1.h>
-
-/ {
-	reserved-memory {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		ranges;
-
-		mcuram2: mcuram2@10000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10000000 0x40000>;
-			no-map;
-		};
-
-		vdev0vring0: vdev0vring0@10040000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10040000 0x1000>;
-			no-map;
-		};
-
-		vdev0vring1: vdev0vring1@10041000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10041000 0x1000>;
-			no-map;
-		};
-
-		vdev0buffer: vdev0buffer@10042000 {
-			compatible = "shared-dma-pool";
-			reg = <0x10042000 0x4000>;
-			no-map;
-		};
-
-		mcuram: mcuram@30000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x30000000 0x40000>;
-			no-map;
-		};
-
-		retram: retram@38000000 {
-			compatible = "shared-dma-pool";
-			reg = <0x38000000 0x10000>;
-			no-map;
-		};
-	};
-
-	reg_sip_eeprom: regulator_eeprom {
-		compatible = "regulator-fixed";
-		regulator-name = "sip_eeprom";
-		regulator-always-on;
-	};
-};
-
-&i2c4 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&i2c4_pins_a>;
-	clock-frequency = <400000>;
-	i2c-scl-rising-time-ns = <185>;
-	i2c-scl-falling-time-ns = <20>;
-	status = "okay";
-
-	pmic: stpmic@33 {
-		compatible = "st,stpmic1";
-		reg = <0x33>;
-		interrupts-extended = <&gpioa 0 IRQ_TYPE_EDGE_FALLING>;
-		interrupt-controller;
-		#interrupt-cells = <2>;
-
-		regulators {
-			compatible = "st,stpmic1-regulators";
-
-			ldo1-supply = <&v3v3>;
-			ldo6-supply = <&v3v3>;
-			pwr_sw1-supply = <&bst_out>;
-
-			vddcore: buck1 {
-				regulator-name = "vddcore";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd_ddr: buck2 {
-				regulator-name = "vdd_ddr";
-				regulator-min-microvolt = <1350000>;
-				regulator-max-microvolt = <1350000>;
-				regulator-always-on;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			vdd: buck3 {
-				regulator-name = "vdd";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				st,mask-reset;
-				regulator-initial-mode = <0>;
-				regulator-over-current-protection;
-			};
-
-			v3v3: buck4 {
-				regulator-name = "v3v3";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-				regulator-initial-mode = <0>;
-			};
-
-			v1v8_audio: ldo1 {
-				regulator-name = "v1v8_audio";
-				regulator-min-microvolt = <1800000>;
-				regulator-max-microvolt = <1800000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO1 0>;
-
-			};
-
-			v3v3_hdmi: ldo2 {
-				regulator-name = "v3v3_hdmi";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO2 0>;
-
-			};
-
-			vtt_ddr: ldo3 {
-				regulator-name = "vtt_ddr";
-				regulator-min-microvolt = <500000>;
-				regulator-max-microvolt = <750000>;
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			vdd_usb: ldo4 {
-				regulator-name = "vdd_usb";
-				regulator-min-microvolt = <3300000>;
-				regulator-max-microvolt = <3300000>;
-				interrupts = <IT_CURLIM_LDO4 0>;
-			};
-
-			vdda: ldo5 {
-				regulator-name = "vdda";
-				regulator-min-microvolt = <2900000>;
-				regulator-max-microvolt = <2900000>;
-				interrupts = <IT_CURLIM_LDO5 0>;
-				regulator-boot-on;
-			};
-
-			v1v2_hdmi: ldo6 {
-				regulator-name = "v1v2_hdmi";
-				regulator-min-microvolt = <1200000>;
-				regulator-max-microvolt = <1200000>;
-				regulator-always-on;
-				interrupts = <IT_CURLIM_LDO6 0>;
-
-			};
-
-			vref_ddr: vref_ddr {
-				regulator-name = "vref_ddr";
-				regulator-always-on;
-				regulator-over-current-protection;
-			};
-
-			bst_out: boost {
-				regulator-name = "bst_out";
-				interrupts = <IT_OCP_BOOST 0>;
-			};
-
-			vbus_otg: pwr_sw1 {
-				regulator-name = "vbus_otg";
-				interrupts = <IT_OCP_OTG 0>;
-				regulator-active-discharge;
-			};
-
-			vbus_sw: pwr_sw2 {
-				regulator-name = "vbus_sw";
-				interrupts = <IT_OCP_SWOUT 0>;
-				regulator-active-discharge;
-			};
-		};
-
-		onkey {
-			compatible = "st,stpmic1-onkey";
-			interrupts = <IT_PONKEY_F 0>, <IT_PONKEY_R 1>;
-			interrupt-names = "onkey-falling", "onkey-rising";
-		};
-
-		pmic_watchdog: watchdog {
-			compatible = "st,stpmic1-wdt";
-			status = "disabled";
-		};
-	};
-
-	sip_eeprom: eeprom@50 {
-		compatible = "atmel,24c32";
-		vcc-supply = <&reg_sip_eeprom>;
-		reg = <0x50>;
-	};
-};
-
-&ipcc {
-	status = "okay";
-};
-
-&m4_rproc {
-	memory-region = <&retram>, <&mcuram>, <&mcuram2>, <&vdev0vring0>,
-			<&vdev0vring1>, <&vdev0buffer>;
-	mboxes = <&ipcc 0>, <&ipcc 1>, <&ipcc 2>;
-	mbox-names = "vq0", "vq1", "shutdown";
-	interrupt-parent = <&exti>;
-	interrupts = <68 1>;
-	status = "okay";
-};
-
-&rng1 {
-	status = "okay";
-};
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 3/4] clk: at91: remove no-longer needed dt-compat code

[Ahmad Fatoum]

dt-compat.c implemented bindings for following compatibles:

	atmel,at91rm9200-clk-main-osc
	atmel,at91sam9x5-clk-main-rc-osc
	atmel,at91rm9200-clk-main
	atmel,at91sam9x5-clk-main
	atmel,at91rm9200-clk-master
	atmel,at91sam9x5-clk-master
	atmel,at91rm9200-clk-peripheral
	atmel,at91sam9x5-clk-peripheral
	atmel,at91rm9200-clk-pll
	atmel,sama5d3-clk-pll
	atmel,at91sam9x5-clk-plldiv
	atmel,at91rm9200-clk-programmable
	atmel,at91sam9g45-clk-programmable
	atmel,at91sam9x5-clk-programmable
	atmel,at91sam9x5-clk-smd
	atmel,at91rm9200-clk-system
	atmel,at91sam9x5-clk-usb
	atmel,at91sam9n12-clk-usb
	atmel,at91rm9200-clk-usb
	atmel,at91sam9x5-clk-utmi

With the recent v5.8-rc1 sync, we no longer have any device trees in
the barebox repository that use these. Unlike Linux, we don't need to
support probing from old device trees, so drop the now unused code.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/clk/at91/Makefile    |  10 +-
 drivers/clk/at91/dt-compat.c | 727 -----------------------------------
 2 files changed, 5 insertions(+), 732 deletions(-)
 delete mode 100644 drivers/clk/at91/dt-compat.c

diff --git a/drivers/clk/at91/Makefile b/drivers/clk/at91/Makefile
index 08958699d522..083555b4d2d3 100644
--- a/drivers/clk/at91/Makefile
+++ b/drivers/clk/at91/Makefile
@@ -15,11 +15,11 @@ obj-$(CONFIG_HAVE_AT91_H32MX)		+= clk-h32mx.o
 obj-$(CONFIG_HAVE_AT91_GENERATED_CLK)	+= clk-generated.o
 obj-$(CONFIG_HAVE_AT91_I2S_MUX_CLK)	+= clk-i2s-mux.o
 obj-$(CONFIG_HAVE_AT91_SAM9X60_PLL)	+= clk-sam9x60-pll.o
-obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o dt-compat.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o dt-compat.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o dt-compat.o
-obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o dt-compat.o
+obj-$(CONFIG_SOC_AT91RM9200) += at91rm9200.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9260.o at91sam9rl.o at91sam9x5.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9g45.o
+obj-$(CONFIG_SOC_AT91SAM9) += at91sam9n12.o at91sam9x5.o
 obj-$(CONFIG_SOC_SAM9X60) += sam9x60.o
+obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o
 obj-$(CONFIG_SOC_SAMA5D4) += sama5d4.o
-obj-$(CONFIG_SOC_SAMA5D3) += sama5d3.o dt-compat.o
 obj-$(CONFIG_SOC_SAMA5D2) += sama5d2.o
diff --git a/drivers/clk/at91/dt-compat.c b/drivers/clk/at91/dt-compat.c
deleted file mode 100644
index b888249199b5..000000000000
--- a/drivers/clk/at91/dt-compat.c
+++ /dev/null
@@ -1,727 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-#include <linux/kernel.h>
-#include <linux/clk.h>
-#include <of.h>
-#include <driver.h>
-#include <regmap.h>
-#include <mfd/syscon.h>
-
-
-#include "pmc.h"
-
-#define MASTER_SOURCE_MAX	4
-
-#define PERIPHERAL_AT91RM9200	0
-#define PERIPHERAL_AT91SAM9X5	1
-
-#define PERIPHERAL_MAX		64
-
-#define PERIPHERAL_ID_MIN	2
-
-#define PROG_SOURCE_MAX		5
-#define PROG_ID_MAX		7
-
-#define SYSTEM_MAX_ID		31
-
-static const struct clk_pcr_layout dt_pcr_layout = {
-	.offset = 0x10c,
-	.cmd = BIT(12),
-	.pid_mask = GENMASK(5, 0),
-	.div_mask = GENMASK(17, 16),
-	.gckcss_mask = GENMASK(10, 8),
-};
-
-static void __init of_at91rm9200_clk_main_osc_setup(struct device_node *np)
-{
-	struct clk *hw;
-	const char *name = np->name;
-	const char *parent_name;
-	struct regmap *regmap;
-	bool bypass;
-
-	of_property_read_string(np, "clock-output-names", &name);
-	bypass = of_property_read_bool(np, "atmel,osc-bypass");
-	parent_name = of_clk_get_parent_name(np, 0);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91_clk_register_main_osc(regmap, name, parent_name, bypass);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_main_osc, "atmel,at91rm9200-clk-main-osc",
-	       of_at91rm9200_clk_main_osc_setup);
-
-static void __init of_at91sam9x5_clk_main_rc_osc_setup(struct device_node *np)
-{
-	struct clk *hw;
-	u32 frequency = 0;
-	u32 accuracy = 0;
-	const char *name = np->name;
-	struct regmap *regmap;
-
-	of_property_read_string(np, "clock-output-names", &name);
-	of_property_read_u32(np, "clock-frequency", &frequency);
-	of_property_read_u32(np, "clock-accuracy", &accuracy);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91_clk_register_main_rc_osc(regmap, name, frequency, accuracy);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_main_rc_osc, "atmel,at91sam9x5-clk-main-rc-osc",
-	       of_at91sam9x5_clk_main_rc_osc_setup);
-
-static void __init of_at91rm9200_clk_main_setup(struct device_node *np)
-{
-	struct clk *hw;
-	const char *parent_name;
-	const char *name = np->name;
-	struct regmap *regmap;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91_clk_register_rm9200_main(regmap, name, parent_name);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_main, "atmel,at91rm9200-clk-main",
-	       of_at91rm9200_clk_main_setup);
-
-static void __init of_at91sam9x5_clk_main_setup(struct device_node *np)
-{
-	struct clk *hw;
-	const char *parent_names[2];
-	unsigned int num_parents;
-	const char *name = np->name;
-	struct regmap *regmap;
-
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents == 0 || num_parents > 2)
-		return;
-
-	of_clk_parent_fill(np, parent_names, num_parents);
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	hw = at91_clk_register_sam9x5_main(regmap, name, parent_names,
-					   num_parents);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_main, "atmel,at91sam9x5-clk-main",
-	       of_at91sam9x5_clk_main_setup);
-
-static struct clk_master_characteristics * __init
-of_at91_clk_master_get_characteristics(struct device_node *np)
-{
-	struct clk_master_characteristics *characteristics;
-
-	characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
-	if (!characteristics)
-		return NULL;
-
-	if (of_at91_get_clk_range(np, "atmel,clk-output-range", &characteristics->output))
-		goto out_free_characteristics;
-
-	of_property_read_u32_array(np, "atmel,clk-divisors",
-				   characteristics->divisors, 4);
-
-	characteristics->have_div3_pres =
-		of_property_read_bool(np, "atmel,master-clk-have-div3-pres");
-
-	return characteristics;
-
-out_free_characteristics:
-	kfree(characteristics);
-	return NULL;
-}
-
-static void __init
-of_at91_clk_master_setup(struct device_node *np,
-			 const struct clk_master_layout *layout)
-{
-	struct clk *hw;
-	unsigned int num_parents;
-	const char *parent_names[MASTER_SOURCE_MAX];
-	const char *name = np->name;
-	struct clk_master_characteristics *characteristics;
-	struct regmap *regmap;
-
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents == 0 || num_parents > MASTER_SOURCE_MAX)
-		return;
-
-	of_clk_parent_fill(np, parent_names, num_parents);
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	characteristics = of_at91_clk_master_get_characteristics(np);
-	if (!characteristics)
-		return;
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91_clk_register_master(regmap, name, num_parents,
-				      parent_names, layout,
-				      characteristics);
-	if (IS_ERR(hw))
-		goto out_free_characteristics;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-	return;
-
-out_free_characteristics:
-	kfree(characteristics);
-}
-
-static void __init of_at91rm9200_clk_master_setup(struct device_node *np)
-{
-	of_at91_clk_master_setup(np, &at91rm9200_master_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_master, "atmel,at91rm9200-clk-master",
-	       of_at91rm9200_clk_master_setup);
-
-static void __init of_at91sam9x5_clk_master_setup(struct device_node *np)
-{
-	of_at91_clk_master_setup(np, &at91sam9x5_master_layout);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_master, "atmel,at91sam9x5-clk-master",
-	       of_at91sam9x5_clk_master_setup);
-
-static void __init
-of_at91_clk_periph_setup(struct device_node *np, u8 type)
-{
-	int num;
-	u32 id;
-	struct clk *hw;
-	const char *parent_name;
-	const char *name;
-	struct device_node *periphclknp;
-	struct regmap *regmap;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name)
-		return;
-
-	num = of_get_child_count(np);
-	if (!num || num > PERIPHERAL_MAX)
-		return;
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	for_each_child_of_node(np, periphclknp) {
-		if (of_property_read_u32(periphclknp, "reg", &id))
-			continue;
-
-		if (id >= PERIPHERAL_MAX)
-			continue;
-
-		if (of_property_read_string(np, "clock-output-names", &name))
-			name = periphclknp->name;
-
-		if (type == PERIPHERAL_AT91RM9200) {
-			hw = at91_clk_register_peripheral(regmap, name,
-							  parent_name, id);
-		} else {
-			struct clk_range range = CLK_RANGE(0, 0);
-
-			of_at91_get_clk_range(periphclknp,
-					      "atmel,clk-output-range",
-					      &range);
-
-			hw = at91_clk_register_sam9x5_peripheral(regmap,
-								 &dt_pcr_layout,
-								 name,
-								 parent_name,
-								 id, &range);
-		}
-
-		if (IS_ERR(hw))
-			continue;
-
-		of_clk_add_provider(periphclknp, of_clk_src_simple_get, hw);
-	}
-}
-
-static void __init of_at91rm9200_clk_periph_setup(struct device_node *np)
-{
-	of_at91_clk_periph_setup(np, PERIPHERAL_AT91RM9200);
-}
-CLK_OF_DECLARE(at91rm9200_clk_periph, "atmel,at91rm9200-clk-peripheral",
-	       of_at91rm9200_clk_periph_setup);
-
-static void __init of_at91sam9x5_clk_periph_setup(struct device_node *np)
-{
-	of_at91_clk_periph_setup(np, PERIPHERAL_AT91SAM9X5);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_periph, "atmel,at91sam9x5-clk-peripheral",
-	       of_at91sam9x5_clk_periph_setup);
-
-static struct clk_pll_characteristics * __init
-of_at91_clk_pll_get_characteristics(struct device_node *np)
-{
-	int i;
-	int offset;
-	u32 tmp;
-	int num_output;
-	u32 num_cells;
-	struct clk_range input;
-	struct clk_range *output;
-	u8 *out = NULL;
-	u16 *icpll = NULL;
-	struct clk_pll_characteristics *characteristics;
-
-	if (of_at91_get_clk_range(np, "atmel,clk-input-range", &input))
-		return NULL;
-
-	if (of_property_read_u32(np, "#atmel,pll-clk-output-range-cells",
-				 &num_cells))
-		return NULL;
-
-	if (num_cells < 2 || num_cells > 4)
-		return NULL;
-
-	if (!of_get_property(np, "atmel,pll-clk-output-ranges", &tmp))
-		return NULL;
-	num_output = tmp / (sizeof(u32) * num_cells);
-
-	characteristics = kzalloc(sizeof(*characteristics), GFP_KERNEL);
-	if (!characteristics)
-		return NULL;
-
-	output = kcalloc(num_output, sizeof(*output), GFP_KERNEL);
-	if (!output)
-		goto out_free_characteristics;
-
-	if (num_cells > 2) {
-		out = kcalloc(num_output, sizeof(*out), GFP_KERNEL);
-		if (!out)
-			goto out_free_output;
-	}
-
-	if (num_cells > 3) {
-		icpll = kcalloc(num_output, sizeof(*icpll), GFP_KERNEL);
-		if (!icpll)
-			goto out_free_output;
-	}
-
-	for (i = 0; i < num_output; i++) {
-		offset = i * num_cells;
-		if (of_property_read_u32_index(np,
-					       "atmel,pll-clk-output-ranges",
-					       offset, &tmp))
-			goto out_free_output;
-		output[i].min = tmp;
-		if (of_property_read_u32_index(np,
-					       "atmel,pll-clk-output-ranges",
-					       offset + 1, &tmp))
-			goto out_free_output;
-		output[i].max = tmp;
-
-		if (num_cells == 2)
-			continue;
-
-		if (of_property_read_u32_index(np,
-					       "atmel,pll-clk-output-ranges",
-					       offset + 2, &tmp))
-			goto out_free_output;
-		out[i] = tmp;
-
-		if (num_cells == 3)
-			continue;
-
-		if (of_property_read_u32_index(np,
-					       "atmel,pll-clk-output-ranges",
-					       offset + 3, &tmp))
-			goto out_free_output;
-		icpll[i] = tmp;
-	}
-
-	characteristics->input = input;
-	characteristics->num_output = num_output;
-	characteristics->output = output;
-	characteristics->out = out;
-	characteristics->icpll = icpll;
-	return characteristics;
-
-out_free_output:
-	kfree(icpll);
-	kfree(out);
-	kfree(output);
-out_free_characteristics:
-	kfree(characteristics);
-	return NULL;
-}
-
-static void __init
-of_at91_clk_pll_setup(struct device_node *np,
-		      const struct clk_pll_layout *layout)
-{
-	u32 id;
-	struct clk *hw;
-	struct regmap *regmap;
-	const char *parent_name;
-	const char *name = np->name;
-	struct clk_pll_characteristics *characteristics;
-
-	if (of_property_read_u32(np, "reg", &id))
-		return;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	characteristics = of_at91_clk_pll_get_characteristics(np);
-	if (!characteristics)
-		return;
-
-	hw = at91_clk_register_pll(regmap, name, parent_name, id, layout,
-				   characteristics);
-	if (IS_ERR(hw))
-		goto out_free_characteristics;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-	return;
-
-out_free_characteristics:
-	kfree(characteristics);
-}
-
-static void __init of_at91rm9200_clk_pll_setup(struct device_node *np)
-{
-	of_at91_clk_pll_setup(np, &at91rm9200_pll_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_pll, "atmel,at91rm9200-clk-pll",
-	       of_at91rm9200_clk_pll_setup);
-
-static void __init of_sama5d3_clk_pll_setup(struct device_node *np)
-{
-	of_at91_clk_pll_setup(np, &sama5d3_pll_layout);
-}
-CLK_OF_DECLARE(sama5d3_clk_pll, "atmel,sama5d3-clk-pll",
-	       of_sama5d3_clk_pll_setup);
-
-static void __init
-of_at91sam9x5_clk_plldiv_setup(struct device_node *np)
-{
-	struct clk *hw;
-	const char *parent_name;
-	const char *name = np->name;
-	struct regmap *regmap;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91_clk_register_plldiv(regmap, name, parent_name);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_plldiv, "atmel,at91sam9x5-clk-plldiv",
-	       of_at91sam9x5_clk_plldiv_setup);
-
-static void __init
-of_at91_clk_prog_setup(struct device_node *np,
-		       const struct clk_programmable_layout *layout)
-{
-	int num;
-	u32 id;
-	struct clk *hw;
-	unsigned int num_parents;
-	const char *parent_names[PROG_SOURCE_MAX];
-	const char *name;
-	struct device_node *progclknp;
-	struct regmap *regmap;
-
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents == 0 || num_parents > PROG_SOURCE_MAX)
-		return;
-
-	of_clk_parent_fill(np, parent_names, num_parents);
-
-	num = of_get_child_count(np);
-	if (!num || num > (PROG_ID_MAX + 1))
-		return;
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	for_each_child_of_node(np, progclknp) {
-		if (of_property_read_u32(progclknp, "reg", &id))
-			continue;
-
-		if (of_property_read_string(np, "clock-output-names", &name))
-			name = progclknp->name;
-
-		hw = at91_clk_register_programmable(regmap, name,
-						    parent_names, num_parents,
-						    id, layout);
-		if (IS_ERR(hw))
-			continue;
-
-		of_clk_add_provider(progclknp, of_clk_src_simple_get, hw);
-	}
-}
-
-static void __init of_at91rm9200_clk_prog_setup(struct device_node *np)
-{
-	of_at91_clk_prog_setup(np, &at91rm9200_programmable_layout);
-}
-CLK_OF_DECLARE(at91rm9200_clk_prog, "atmel,at91rm9200-clk-programmable",
-	       of_at91rm9200_clk_prog_setup);
-
-static void __init of_at91sam9g45_clk_prog_setup(struct device_node *np)
-{
-	of_at91_clk_prog_setup(np, &at91sam9g45_programmable_layout);
-}
-CLK_OF_DECLARE(at91sam9g45_clk_prog, "atmel,at91sam9g45-clk-programmable",
-	       of_at91sam9g45_clk_prog_setup);
-
-static void __init of_at91sam9x5_clk_prog_setup(struct device_node *np)
-{
-	of_at91_clk_prog_setup(np, &at91sam9x5_programmable_layout);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_prog, "atmel,at91sam9x5-clk-programmable",
-	       of_at91sam9x5_clk_prog_setup);
-
-#ifdef CONFIG_HAVE_AT91_SMD
-#define SMD_SOURCE_MAX		2
-
-static void __init of_at91sam9x5_clk_smd_setup(struct device_node *np)
-{
-	struct clk *hw;
-	unsigned int num_parents;
-	const char *parent_names[SMD_SOURCE_MAX];
-	const char *name = np->name;
-	struct regmap *regmap;
-
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents == 0 || num_parents > SMD_SOURCE_MAX)
-		return;
-
-	of_clk_parent_fill(np, parent_names, num_parents);
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91sam9x5_clk_register_smd(regmap, name, parent_names,
-					 num_parents);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_smd, "atmel,at91sam9x5-clk-smd",
-	       of_at91sam9x5_clk_smd_setup);
-#endif /* CONFIG_HAVE_AT91_SMD */
-
-static void __init of_at91rm9200_clk_sys_setup(struct device_node *np)
-{
-	int num;
-	u32 id;
-	struct clk *hw;
-	const char *name;
-	struct device_node *sysclknp;
-	const char *parent_name;
-	struct regmap *regmap;
-
-	num = of_get_child_count(np);
-	if (num > (SYSTEM_MAX_ID + 1))
-		return;
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	for_each_child_of_node(np, sysclknp) {
-		if (of_property_read_u32(sysclknp, "reg", &id))
-			continue;
-
-		if (of_property_read_string(np, "clock-output-names", &name))
-			name = sysclknp->name;
-
-		parent_name = of_clk_get_parent_name(sysclknp, 0);
-
-		hw = at91_clk_register_system(regmap, name, parent_name, id);
-		if (IS_ERR(hw))
-			continue;
-
-		of_clk_add_provider(sysclknp, of_clk_src_simple_get, hw);
-	}
-}
-CLK_OF_DECLARE(at91rm9200_clk_sys, "atmel,at91rm9200-clk-system",
-	       of_at91rm9200_clk_sys_setup);
-
-#ifdef CONFIG_HAVE_AT91_USB_CLK
-#define USB_SOURCE_MAX		2
-
-static void __init of_at91sam9x5_clk_usb_setup(struct device_node *np)
-{
-	struct clk *hw;
-	unsigned int num_parents;
-	const char *parent_names[USB_SOURCE_MAX];
-	const char *name = np->name;
-	struct regmap *regmap;
-
-	num_parents = of_clk_get_parent_count(np);
-	if (num_parents == 0 || num_parents > USB_SOURCE_MAX)
-		return;
-
-	of_clk_parent_fill(np, parent_names, num_parents);
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91sam9x5_clk_register_usb(regmap, name, parent_names,
-					 num_parents);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_usb, "atmel,at91sam9x5-clk-usb",
-	       of_at91sam9x5_clk_usb_setup);
-
-static void __init of_at91sam9n12_clk_usb_setup(struct device_node *np)
-{
-	struct clk *hw;
-	const char *parent_name;
-	const char *name = np->name;
-	struct regmap *regmap;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name)
-		return;
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-
-	hw = at91sam9n12_clk_register_usb(regmap, name, parent_name);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9n12_clk_usb, "atmel,at91sam9n12-clk-usb",
-	       of_at91sam9n12_clk_usb_setup);
-
-static void __init of_at91rm9200_clk_usb_setup(struct device_node *np)
-{
-	struct clk *hw;
-	const char *parent_name;
-	const char *name = np->name;
-	u32 divisors[4] = {0, 0, 0, 0};
-	struct regmap *regmap;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-	if (!parent_name)
-		return;
-
-	of_property_read_u32_array(np, "atmel,clk-divisors", divisors, 4);
-	if (!divisors[0])
-		return;
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap))
-		return;
-	hw = at91rm9200_clk_register_usb(regmap, name, parent_name, divisors);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91rm9200_clk_usb, "atmel,at91rm9200-clk-usb",
-	       of_at91rm9200_clk_usb_setup);
-#endif /* CONFIG_HAVE_AT91_USB_CLK */
-
-#ifdef CONFIG_HAVE_AT91_UTMI
-static void __init of_at91sam9x5_clk_utmi_setup(struct device_node *np)
-{
-	struct clk *hw;
-	const char *parent_name;
-	const char *name = np->name;
-	struct regmap *regmap_pmc, *regmap_sfr;
-
-	parent_name = of_clk_get_parent_name(np, 0);
-
-	of_property_read_string(np, "clock-output-names", &name);
-
-	regmap_pmc = syscon_node_to_regmap(of_get_parent(np));
-	if (IS_ERR(regmap_pmc))
-		return;
-
-	/*
-	 * If the device supports different mainck rates, this value has to be
-	 * set in the UTMI Clock Trimming register.
-	 * - 9x5: mainck supports several rates but it is indicated that a
-	 *   12 MHz is needed in case of USB.
-	 * - sama5d3 and sama5d2: mainck supports several rates. Configuring
-	 *   the FREQ field of the UTMI Clock Trimming register is mandatory.
-	 * - sama5d4: mainck is at 12 MHz.
-	 *
-	 * We only need to retrieve sama5d3 or sama5d2 sfr regmap.
-	 */
-	regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d3-sfr");
-	if (IS_ERR(regmap_sfr)) {
-		regmap_sfr = syscon_regmap_lookup_by_compatible("atmel,sama5d2-sfr");
-		if (IS_ERR(regmap_sfr))
-			regmap_sfr = NULL;
-	}
-
-	hw = at91_clk_register_utmi(regmap_pmc, regmap_sfr, name, parent_name);
-	if (IS_ERR(hw))
-		return;
-
-	of_clk_add_provider(np, of_clk_src_simple_get, hw);
-}
-CLK_OF_DECLARE(at91sam9x5_clk_utmi, "atmel,at91sam9x5-clk-utmi",
-	       of_at91sam9x5_clk_utmi_setup);
-#endif /* CONFIG_HAVE_AT91_UTMI */
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

[PATCH 4/4] clk: at91: remove now-duplicate crutch #defines

[Ahmad Fatoum]

As the code comment describes, these #defines were only needed
temporarily till dts/ is synced vs Linux v5.8-rc1. This is now the case,
so drop them again.

Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
 drivers/clk/at91/pmc.h | 6 ------
 1 file changed, 6 deletions(-)

diff --git a/drivers/clk/at91/pmc.h b/drivers/clk/at91/pmc.h
index 9503202c5d03..4e6ec8231eae 100644
--- a/drivers/clk/at91/pmc.h
+++ b/drivers/clk/at91/pmc.h
@@ -219,10 +219,4 @@ static inline void pmc_register_id(u8 id) {}
 static inline void pmc_register_pck(u8 pck) {}
 #endif
 
-/* FIXME: can be dropped after v5.8-rc1 dts/include/dt-bindings sync */
-#define PMC_TYPE_PROGRAMMABLE	4
-#define PMC_PLLACK		7
-#define PMC_PLLBCK		8
-#define PMC_AUDIOPLLCK		9
-
 #endif /* __PMC_H_ */
-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 1/4] ARM: vexpress: dts: use direct &phandle instead of &{/path}

[Ahmad Fatoum]

On 6/23/20 3:25 PM, Ahmad Fatoum wrote:
> 6940ba22c66a ("dts: update to v5.3-rc1") added a label that we can
> reference instead of relying on the path not changing. Make use of it,
> so the compilation doesn't fail along with the v5.8-rc1 dts/ sync.
> 
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> [afa: board is still broken, because the "arm,arm-firmware-suite"
> partitioning is unknown to barebox, but at least it's not doubly
> broken.]

I see now that Roland had fixed it for arch/arm/dts/vexpress-v2p-ca9.dts.
Please skip this patch. I send it out again with Roland's fix incorporated. 

> ---
>  arch/arm/dts/vexpress-v2p-ca15.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/arch/arm/dts/vexpress-v2p-ca15.dts b/arch/arm/dts/vexpress-v2p-ca15.dts
> index a4cdc8d1f5f0..d02b8ce523cf 100644
> --- a/arch/arm/dts/vexpress-v2p-ca15.dts
> +++ b/arch/arm/dts/vexpress-v2p-ca15.dts
> @@ -7,7 +7,7 @@
>  	};
>  };
>  
> -&{/bus@8000000/motherboard/flash@0,00000000} {
> +&nor_flash {
>  	#address-cells = <1>;
>  	#size-cells = <1>;
>  
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH 0/4] dts: clean up and a fix

[Sascha Hauer]

On Tue, Jun 23, 2020 at 03:25:17PM +0200, Ahmad Fatoum wrote:
> Hello Sascha,
> 
> the vexpress changed paths, again, so building now fails. Fortunately[1],
> a label: had been introduced meanwhile, that we could use. This is what
> the first patch does. Please order it before the v5.8-rc1 sync, so we
> don't have intermittent build breakage[2].
> 
> The other three patches remove code that became obsolete with the device
> tree sync.
> 
> [1]: The same patch adding the label, also added the partitions node,
>      which broke barebox on the board, but that's a different issue..
> [2]: We probably want a make dtbs target to spot such issues and fix
>      them up into the same commit if needed
> 
> Cheers
> Ahmad Fatoum (4):
>   ARM: vexpress: dts: use direct &phandle instead of &{/path}
>   ARM: stm32mp: dts: extend now upstream stm32mp157c-lxa-mc1.dts
>   clk: at91: remove no-longer needed dt-compat code
>   clk: at91: remove now-duplicate crutch #defines

Applied 2-4, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox