* [PATCH v2] ARM: dts: vexpress-v2p-ca15: adapt fixed NOR flash partition setup
@ 2020-06-23 13:45 Ahmad Fatoum
2020-06-24 7:12 ` Sascha Hauer
0 siblings, 1 reply; 2+ messages in thread
From: Ahmad Fatoum @ 2020-06-23 13:45 UTC (permalink / raw)
To: barebox; +Cc: Roland Hieber, Ahmad Fatoum
Roland already fixed the vexpress-v2p-ca9:
> Upstream DTS commit 62a5017bf825c9e4d317 ("ARM: dts: vexpress: specify
> AFS partition") [1] introduced an empty node at /smb@4000000
> /motherboard/flash@0,00000000/partitions, which is preferred by the OF
> partitions parser over the single partition nodes. In the same commit,
> upstream set the compatible to "arm,arm-firmware-suite", which barebox
> does not know about. Adapt our fixed partition setup accordingly by
> wrapping all partitions in an extra "partitions" node with the correct
> compatible.
> [1]: https://git.kernel.org/linus/62a5017bf825c9e4d3176eb975a01c329a9f36
Do the same for the vexpress-v2p-ca15. While at it use the new label:
added along with 6940ba22c66a ("dts: update to v5.3-rc1"). This way we
aren't (build-)broken, when the upstream path changes in v5.8-rc1.
Fixes: 6940ba22c66ac1c71350 ("dts: update to v5.3-rc1")
Cc: Roland Hieber <r.hieber@pengutronix.de>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
v1 -> v2:
- Fixed other board name (ca9) in commit message
Hello Sascha,
please order this before the v5.8-rc1 dts/ update as otherwise, the
vexpress
configs get build-broken.
Cheers,
Ahmad
---
arch/arm/dts/vexpress-v2p-ca15.dts | 23 +++++++++++++----------
1 file changed, 13 insertions(+), 10 deletions(-)
diff --git a/arch/arm/dts/vexpress-v2p-ca15.dts b/arch/arm/dts/vexpress-v2p-ca15.dts
index a4cdc8d1f5f0..69e93ee7b2b3 100644
--- a/arch/arm/dts/vexpress-v2p-ca15.dts
+++ b/arch/arm/dts/vexpress-v2p-ca15.dts
@@ -7,17 +7,20 @@
};
};
-&{/bus@8000000/motherboard/flash@0,00000000} {
- #address-cells = <1>;
- #size-cells = <1>;
+&nor_flash {
+ partitions {
+ compatible = "fixed-partitions";
+ #address-cells = <1>;
+ #size-cells = <1>;
- partition@0 {
- label = "barebox";
- reg = <0x0 0x80000>;
- };
+ partition@0 {
+ label = "barebox";
+ reg = <0x0 0x80000>;
+ };
- barebox_env: partition@80000 {
- label = "barebox-environment";
- reg = <0x80000 0x80000>;
+ barebox_env: partition@80000 {
+ label = "barebox-environment";
+ reg = <0x80000 0x80000>;
+ };
};
};
--
2.27.0
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [PATCH v2] ARM: dts: vexpress-v2p-ca15: adapt fixed NOR flash partition setup
2020-06-23 13:45 [PATCH v2] ARM: dts: vexpress-v2p-ca15: adapt fixed NOR flash partition setup Ahmad Fatoum
@ 2020-06-24 7:12 ` Sascha Hauer
0 siblings, 0 replies; 2+ messages in thread
From: Sascha Hauer @ 2020-06-24 7:12 UTC (permalink / raw)
To: Ahmad Fatoum; +Cc: barebox, Roland Hieber
On Tue, Jun 23, 2020 at 03:45:34PM +0200, Ahmad Fatoum wrote:
> Roland already fixed the vexpress-v2p-ca9:
> > Upstream DTS commit 62a5017bf825c9e4d317 ("ARM: dts: vexpress: specify
> > AFS partition") [1] introduced an empty node at /smb@4000000
> > /motherboard/flash@0,00000000/partitions, which is preferred by the OF
> > partitions parser over the single partition nodes. In the same commit,
> > upstream set the compatible to "arm,arm-firmware-suite", which barebox
> > does not know about. Adapt our fixed partition setup accordingly by
> > wrapping all partitions in an extra "partitions" node with the correct
> > compatible.
> > [1]: https://git.kernel.org/linus/62a5017bf825c9e4d3176eb975a01c329a9f36
>
> Do the same for the vexpress-v2p-ca15. While at it use the new label:
> added along with 6940ba22c66a ("dts: update to v5.3-rc1"). This way we
> aren't (build-)broken, when the upstream path changes in v5.8-rc1.
>
> Fixes: 6940ba22c66ac1c71350 ("dts: update to v5.3-rc1")
> Cc: Roland Hieber <r.hieber@pengutronix.de>
> Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
> ---
> v1 -> v2:
> - Fixed other board name (ca9) in commit message
>
> Hello Sascha,
>
> please order this before the v5.8-rc1 dts/ update as otherwise, the
> vexpress
> configs get build-broken.
I have put it right before the dts update.
Thanks,
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2020-06-24 7:12 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-06-23 13:45 [PATCH v2] ARM: dts: vexpress-v2p-ca15: adapt fixed NOR flash partition setup Ahmad Fatoum
2020-06-24 7:12 ` Sascha Hauer
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox