From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jveNC-0004y8-Vh for barebox@lists.infradead.org; Wed, 15 Jul 2020 10:10:48 +0000 From: Oleksij Rempel Date: Wed, 15 Jul 2020 12:10:40 +0200 Message-Id: <20200715101042.29944-2-o.rempel@pengutronix.de> In-Reply-To: <20200715101042.29944-1-o.rempel@pengutronix.de> References: <20200715101042.29944-1-o.rempel@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v2 1/3] of: base: register DT root as device To: barebox@lists.infradead.org Cc: Oleksij Rempel , david@protonic.nl A usual board file contains at least one of_machine_is_compatible(). Some of the have a rather long list with complicated version logic. To avoid own implementation for driver management, register the root node of devicetree as platform device. So, the main platform bus can attach proper board driver. After this patch a typical board.c file can reuse existing driver infrastructure. After this patch, you will be able to see all registered board drivers with drvinfo as fallow: ... board-embest-riot board-protonic-imx6 machine.of ... With devinfo, you'll be able to get some board specific information, if this is implemented: barebox@Protonic PRTI6Q board:/ devinfo machine.of Driver: board-protonic-imx6 Bus: platform Parameters: boardid: 0 (type: uint32) boardrev: 1 (type: uint32) Signed-off-by: Oleksij Rempel --- drivers/of/base.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/of/base.c b/drivers/of/base.c index 4c633bcd49..c48bf7a7fb 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -2133,6 +2133,7 @@ static void of_probe_memory(void) int of_probe(void) { struct device_node *firmware; + struct device_d *dev; if(!root_node) return -ENODEV; @@ -2149,6 +2150,10 @@ int of_probe(void) if (firmware) of_platform_populate(firmware, NULL, NULL); + dev = of_platform_device_create(root_node, NULL); + if (dev) + dev_set_name(dev, "%s.of", "machine"); + of_clk_init(root_node, NULL); of_platform_populate(root_node, of_default_bus_match_table, NULL); -- 2.27.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox