From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from zimbra2.kalray.eu ([92.103.151.219]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1jxr2Z-0007Db-CN for barebox@lists.infradead.org; Tue, 21 Jul 2020 12:06:47 +0000 From: Jules Maselbas Date: Tue, 21 Jul 2020 14:05:58 +0200 Message-Id: <20200721120600.15114-13-jmaselbas@kalray.eu> In-Reply-To: <20200721120600.15114-1-jmaselbas@kalray.eu> References: <20200721120600.15114-1-jmaselbas@kalray.eu> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , MIME-Version: 1.0 Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v3 12/14] usb: dwc2: Add gadget driver To: Barebox List Cc: Jules Maselbas Signed-off-by: Jules Maselbas --- drivers/usb/dwc2/Kconfig | 7 + drivers/usb/dwc2/Makefile | 1 + drivers/usb/dwc2/core.c | 64 + drivers/usb/dwc2/core.h | 7 + drivers/usb/dwc2/dwc2.c | 2 + drivers/usb/dwc2/dwc2.h | 7 + drivers/usb/dwc2/gadget.c | 2736 +++++++++++++++++++++++++++++++++++++ drivers/usb/dwc2/regs.h | 1 + 8 files changed, 2825 insertions(+) create mode 100644 drivers/usb/dwc2/gadget.c diff --git a/drivers/usb/dwc2/Kconfig b/drivers/usb/dwc2/Kconfig index cd24d8cfa..3c3cdc3de 100644 --- a/drivers/usb/dwc2/Kconfig +++ b/drivers/usb/dwc2/Kconfig @@ -12,3 +12,10 @@ config USB_DWC2_HOST select USB_DWC2 help Select this when you want to use DWC2 in host mode. + +config USB_DWC2_GADGET + bool "DWC2 Gadget mode support" + depends on USB_GADGET + select USB_DWC2 + help + Select this when you want to use DWC2 in gadget mode. diff --git a/drivers/usb/dwc2/Makefile b/drivers/usb/dwc2/Makefile index f513fbec7..f019051d8 100644 --- a/drivers/usb/dwc2/Makefile +++ b/drivers/usb/dwc2/Makefile @@ -1 +1,2 @@ obj-$(CONFIG_USB_DWC2_HOST) += dwc2.o core.o host.o rhub.o +obj-$(CONFIG_USB_DWC2_GADGET) += dwc2.o core.o gadget.o diff --git a/drivers/usb/dwc2/core.c b/drivers/usb/dwc2/core.c index a8693097d..c4a3cc789 100644 --- a/drivers/usb/dwc2/core.c +++ b/drivers/usb/dwc2/core.c @@ -87,6 +87,46 @@ void dwc2_set_param_phy_utmi_width(struct dwc2 *dwc2) dwc2->params.phy_utmi_width = val; } +/** + * dwc2_hsotg_tx_fifo_count - return count of TX FIFOs in device mode + * + * @hsotg: Programming view of the DWC_otg controller + */ +int dwc2_tx_fifo_count(struct dwc2 *dwc2) +{ + if (dwc2->hw_params.en_multiple_tx_fifo) + /* In dedicated FIFO mode we need count of IN EPs */ + return dwc2->hw_params.num_dev_in_eps; + else + /* In shared FIFO mode we need count of Periodic IN EPs */ + return dwc2->hw_params.num_dev_perio_in_ep; +} + +static void dwc2_set_param_fifo_sizes(struct dwc2 *dwc2) +{ + struct dwc2_hw_params *hw = &dwc2->hw_params; + struct dwc2_core_params *p = &dwc2->params; + u32 total_fifo_size = dwc2->hw_params.total_fifo_size; + u32 max_np_tx_fifo_size = hw->dev_nperio_tx_fifo_size; + u32 max_rx_fifo_size = hw->rx_fifo_size; + u32 depth; + int count, i; + + count = dwc2_tx_fifo_count(dwc2); + + depth = total_fifo_size / 4; + p->g_np_tx_fifo_size = min(max_np_tx_fifo_size, depth); + total_fifo_size -= p->g_np_tx_fifo_size; + + depth = 8 * count + 256; + depth = max(total_fifo_size / count, depth); + p->g_rx_fifo_size = min(max_rx_fifo_size, depth); + total_fifo_size -= p->g_rx_fifo_size; + + for (i = 1; i <= count; i++) + p->g_tx_fifo_size[i] = total_fifo_size / count; +} + /** * dwc2_set_default_params() - Set all core parameters to their * auto-detected default values. @@ -138,6 +178,11 @@ void dwc2_set_default_params(struct dwc2 *dwc2) p->host_nperio_tx_fifo_size = hw->host_nperio_tx_fifo_size; p->host_perio_tx_fifo_size = hw->host_perio_tx_fifo_size; } + + if ((dwc2->dr_mode == USB_DR_MODE_PERIPHERAL) || + (dwc2->dr_mode == USB_DR_MODE_OTG)) { + dwc2_set_param_fifo_sizes(dwc2); + } } int dwc2_core_snpsid(struct dwc2 *dwc2) @@ -167,6 +212,23 @@ int dwc2_core_snpsid(struct dwc2 *dwc2) return 0; } +static void dwc2_get_dev_hwparams(struct dwc2 *dwc2) +{ + struct dwc2_hw_params *hw = &dwc2->hw_params; + u32 size; + int count, i; + + size = FIFOSIZE_DEPTH_GET(dwc2_readl(dwc2, GNPTXFSIZ)); + hw->dev_nperio_tx_fifo_size = size; + + count = dwc2_tx_fifo_count(dwc2); + + for (i = 1; i <= count; i++) { + size = FIFOSIZE_DEPTH_GET(dwc2_readl(dwc2, DPTXFSIZN(i))); + hw->g_tx_fifo_size[i] = size; + } +} + /** * During device initialization, read various hardware configuration * registers and interpret the contents. @@ -243,6 +305,8 @@ void dwc2_get_hwparams(struct dwc2 *dwc2) /* fifo sizes */ hw->rx_fifo_size = (grxfsiz & GRXFSIZ_DEPTH_MASK) >> GRXFSIZ_DEPTH_SHIFT; + + dwc2_get_dev_hwparams(dwc2); } /* diff --git a/drivers/usb/dwc2/core.h b/drivers/usb/dwc2/core.h index b188990a0..090ca15fe 100644 --- a/drivers/usb/dwc2/core.h +++ b/drivers/usb/dwc2/core.h @@ -482,7 +482,14 @@ struct dwc2 { void *ctrl_buff; enum dwc2_ep0_state ep0_state; struct usb_gadget_driver *driver; + int num_eps; + u16 frame_number; + u32 fifo_map; + unsigned int dedicated_fifos:1; + unsigned int enabled:1; + unsigned int connected:1; + unsigned int is_selfpowered:1; #endif }; diff --git a/drivers/usb/dwc2/dwc2.c b/drivers/usb/dwc2/dwc2.c index e058cb257..2d14b218a 100644 --- a/drivers/usb/dwc2/dwc2.c +++ b/drivers/usb/dwc2/dwc2.c @@ -65,6 +65,8 @@ static int dwc2_probe(struct device_d *dev) dma_set_mask(dev, DMA_BIT_MASK(32)); ret = dwc2_register_host(dwc2); + + ret = dwc2_gadget_init(dwc2); error: return ret; } diff --git a/drivers/usb/dwc2/dwc2.h b/drivers/usb/dwc2/dwc2.h index f620175df..0ec21a5ac 100644 --- a/drivers/usb/dwc2/dwc2.h +++ b/drivers/usb/dwc2/dwc2.h @@ -18,6 +18,7 @@ void dwc2_get_hwparams(struct dwc2 *dwc2); void dwc2_init_fs_ls_pclk_sel(struct dwc2 *dwc2); void dwc2_flush_all_fifo(struct dwc2 *dwc2); void dwc2_flush_tx_fifo(struct dwc2 *dwc2, const int idx); +int dwc2_tx_fifo_count(struct dwc2 *dwc2); int dwc2_phy_init(struct dwc2 *dwc2, bool select_phy); int dwc2_gahbcfg_init(struct dwc2 *dwc2); @@ -37,3 +38,9 @@ int dwc2_register_host(struct dwc2 *dwc2); static inline int dwc2_register_host(struct dwc2 *dwc2) { return 0; } #endif +/* Gadget functions */ +#ifdef CONFIG_USB_DWC2_GADGET +int dwc2_gadget_init(struct dwc2 *dwc2); +#else +static inline int dwc2_gadget_init(struct dwc2 *dwc2) { return 0; } +#endif diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c new file mode 100644 index 000000000..71fac225b --- /dev/null +++ b/drivers/usb/dwc2/gadget.c @@ -0,0 +1,2736 @@ +// SPDX-License-Identifier: GPL-2.0+ +#include +#include +#include "dwc2.h" + +#define to_dwc2 gadget_to_dwc2 +#define dwc2_set_bit(d, r, b) dwc2_writel(d, (b) | dwc2_readl(d, r), r) +#define dwc2_clear_bit(d, r, b) dwc2_writel(d, ~(b) & dwc2_readl(d, r), r) + +#define spin_lock(lock) +#define spin_unlock(lock) +#define local_irq_save(flags)(void)(flags) +#define local_irq_restore(flags) (void)(flags) +#define spin_lock_irqsave(lock, flags) (void)(flags) +#define spin_unlock_irqrestore(lock, flags) (void)(flags) + +#ifndef USB_ENDPOINT_MAXP_MASK +#define USB_ENDPOINT_MAXP_MASK 0x07ff +#endif +#ifndef USB_EP_MAXP_MULT +#define USB_EP_MAXP_MULT(m) (((m) & 0x1800) >> 11) +#endif + +static void kill_all_requests(struct dwc2 *, struct dwc2_ep *, int); + +static inline struct dwc2_ep *index_to_ep(struct dwc2 *dwc2, + unsigned int ep, int in) +{ + if (ep >= DWC2_MAX_EPS_CHANNELS) + return NULL; + if (in) + return dwc2->eps_in[ep]; + else + return dwc2->eps_out[ep]; +} + +static inline int using_dma(struct dwc2 *dwc2) +{ + /* Only buffer dma is supported */ + return 1; +} + +static void dwc2_dcfg_set_addr(struct dwc2 *dwc2, int addr) +{ + u32 dcfg = dwc2_readl(dwc2, DCFG); + + dcfg &= ~DCFG_DEVADDR_MASK; + dcfg |= (addr << DCFG_DEVADDR_SHIFT) & DCFG_DEVADDR_MASK; + dwc2_writel(dwc2, dcfg, DCFG); +} + +/** + * dwc2_hsotg_ctrl_epint - enable/disable an endpoint irq + * @hsotg: The device state + * @ep: The endpoint index + * @dir_in: True if direction is in. + * @en: The enable value, true to enable + * + * Set or clear the mask for an individual endpoint's interrupt + * request. + */ +static void dwc2_hsotg_ctrl_epint(struct dwc2 *dwc2, + unsigned int ep, unsigned int dir_in, + unsigned int en) +{ + unsigned long flags; + u32 bit = 1 << ep; + u32 daint; + + if (!dir_in) + bit <<= 16; + + local_irq_save(flags); + daint = dwc2_readl(dwc2, DAINTMSK); + if (en) + daint |= bit; + else + daint &= ~bit; + dwc2_writel(dwc2, daint, DAINTMSK); + local_irq_restore(flags); + +} + +/** + * get_ep_head - return the first request on the endpoint + * @hs_ep: The controller endpoint to get + * + * Get the first request on the endpoint. + */ +static struct dwc2_request *get_ep_head(struct dwc2_ep *hs_ep) +{ + return list_first_entry_or_null(&hs_ep->queue, struct dwc2_request, + queue); +} + +/** + * get_ep_limit - get the maximum data legnth for this endpoint + * @hs_ep: The endpoint + * + * Return the maximum data that can be queued in one go on a given endpoint + * so that transfers that are too long can be split. + */ +static unsigned int get_ep_limit(struct dwc2_ep *hs_ep) +{ + int index = hs_ep->epnum; + unsigned int maxsize; + unsigned int maxpkt; + + if (index != 0) { + maxsize = DXEPTSIZ_XFERSIZE_LIMIT + 1; + maxpkt = DXEPTSIZ_PKTCNT_LIMIT + 1; + } else { + maxsize = 64 + 64; + if (hs_ep->dir_in) + maxpkt = DIEPTSIZ0_PKTCNT_LIMIT + 1; + else + maxpkt = 2; + } + + /* we made the constant loading easier above by using +1 */ + maxpkt--; + maxsize--; + + /* + * constrain by packet count if maxpkts*pktsize is greater + * than the length register size. + */ + + if ((maxpkt * hs_ep->ep.maxpacket) < maxsize) + maxsize = maxpkt * hs_ep->ep.maxpacket; + + return maxsize; +} + +static u32 dwc2_read_frameno(struct dwc2 *dwc2) +{ + u32 dsts; + + dsts = dwc2_readl(dwc2, DSTS); + dsts &= DSTS_SOFFN_MASK; + dsts >>= DSTS_SOFFN_SHIFT; + + return dsts; +} + +/** + * dwc2_gadget_incr_frame_num - Increments the targeted frame number. + * @hs_ep: The endpoint + * + * This function will also check if the frame number overruns DSTS_SOFFN_LIMIT. + * If an overrun occurs it will wrap the value and set the frame_overrun flag. + */ +static inline void dwc2_gadget_incr_frame_num(struct dwc2_ep *hs_ep) +{ + hs_ep->target_frame += hs_ep->interval; + if (hs_ep->target_frame > DSTS_SOFFN_LIMIT) { + hs_ep->frame_overrun = true; + hs_ep->target_frame &= DSTS_SOFFN_LIMIT; + } else { + hs_ep->frame_overrun = false; + } +} + +/** + * dwc2_gadget_target_frame_elapsed - Checks target frame + * @hs_ep: The driver endpoint to check + * + * Returns 1 if targeted frame elapsed. If returned 1 then we need to drop + * corresponding transfer. + */ +static bool dwc2_gadget_target_frame_elapsed(struct dwc2_ep *hs_ep) +{ + struct dwc2 *dwc2 = hs_ep->dwc2; + u32 target_frame = hs_ep->target_frame; + u32 current_frame = dwc2->frame_number; + bool frame_overrun = hs_ep->frame_overrun; + + if (!frame_overrun && current_frame >= target_frame) + return true; + + if (frame_overrun && current_frame >= target_frame && + ((current_frame - target_frame) < DSTS_SOFFN_LIMIT / 2)) + return true; + + return false; +} + + +/** + * dwc2_gadget_start_req - start a USB request from an endpoint's queue + * @dwc2: The controller state. + * @hs_ep: The endpoint to process a request for + * @hs_req: The request to start. + * @continuing: True if we are doing more for the current request. + * + * Start the given request running by setting the endpoint registers + * appropriately, and writing any data to the FIFOs. + */ +static void dwc2_gadget_start_req(struct dwc2 *dwc2, + struct dwc2_ep *hs_ep, + struct dwc2_request *hs_req, + bool continuing) +{ + struct usb_request *ureq = &hs_req->req; + int index = hs_ep->epnum; + int dir_in = hs_ep->dir_in; + u32 epctrl_reg; + u32 epsize_reg; + u32 epsize; + u32 ctrl; + unsigned int length; + unsigned int packets; + unsigned int maxreq; + unsigned int dma_reg; + + if (index != 0) { + if (hs_ep->req && !continuing) { + dwc2_err(dwc2, "%s: active request\n", __func__); + WARN_ON(1); + return; + } else if (hs_ep->req != hs_req && continuing) { + dwc2_err(dwc2, + "%s: continue different req\n", __func__); + WARN_ON(1); + return; + } + } + + dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epsize_reg = dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); + + dwc2_dbg(dwc2, "%s: DxEPCTL=0x%08x, ep %d, dir %s\n", + __func__, dwc2_readl(dwc2, epctrl_reg), index, + hs_ep->dir_in ? "in" : "out"); + + /* If endpoint is stalled, we will restart request later */ + ctrl = dwc2_readl(dwc2, epctrl_reg); + + if (index && ctrl & DXEPCTL_STALL) { + dwc2_warn(dwc2, "%s: ep%d is stalled\n", __func__, index); + return; + } + + length = ureq->length - ureq->actual; + dwc2_dbg(dwc2, "ureq->length:%d ureq->actual:%d\n", + ureq->length, ureq->actual); + + maxreq = get_ep_limit(hs_ep); + + if (length > maxreq) { + int round = maxreq % hs_ep->ep.maxpacket; + + dwc2_dbg(dwc2, "%s: length %d, max-req %d, r %d\n", + __func__, length, maxreq, round); + + /* round down to multiple of packets */ + if (round) + maxreq -= round; + + length = maxreq; + } + + if (length) + packets = DIV_ROUND_UP(length, hs_ep->ep.maxpacket); + else + packets = 1; /* send one packet if length is zero. */ + + if (dir_in && index != 0) + if (hs_ep->isochronous) + epsize = DXEPTSIZ_MC(packets); + else + epsize = DXEPTSIZ_MC(1); + else + epsize = 0; + + /* + * zero length packet should be programmed on its own and should not + * be counted in DIEPTSIZ.PktCnt with other packets. + */ + if (dir_in && ureq->zero && !continuing) { + /* Test if zlp is actually required. */ + if ((ureq->length >= hs_ep->ep.maxpacket) && + !(ureq->length % hs_ep->ep.maxpacket)) + hs_ep->send_zlp = 1; + } + + epsize |= DXEPTSIZ_PKTCNT(packets); + epsize |= DXEPTSIZ_XFERSIZE(length); + + dwc2_dbg(dwc2, "%s: %d@%d/%d, 0x%08x => 0x%08x\n", + __func__, packets, length, ureq->length, epsize, epsize_reg); + + /* store the request as the current one we're doing */ + hs_ep->req = hs_req; + + /* write size / packets */ + dwc2_writel(dwc2, epsize, epsize_reg); + + if (using_dma(dwc2) && !continuing && (length != 0)) { + /* + * write DMA address to control register, buffer + * already synced by dwc2_ep_queue(). + */ + + dwc2_writel(dwc2, ureq->dma, dma_reg); + + dwc2_dbg(dwc2, "%s: 0x%p => 0x%08x\n", + __func__, (void *)ureq->dma, dma_reg); + } + + if (hs_ep->isochronous && hs_ep->interval == 1) { + hs_ep->target_frame = dwc2_read_frameno(dwc2); + dwc2_gadget_incr_frame_num(hs_ep); + + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + } + + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + + dwc2_dbg(dwc2, "%s: ep0 state:%d\n", __func__, dwc2->ep0_state); + + /* For Setup request do not clear NAK */ + if (!(index == 0 && dwc2->ep0_state == DWC2_EP0_SETUP)) + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + + dwc2_dbg(dwc2, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); + dwc2_writel(dwc2, ctrl, epctrl_reg); + + /* + * set these, it seems that DMA support increments past the end + * of the packet buffer so we need to calculate the length from + * this information. + */ + hs_ep->size_loaded = length; + hs_ep->last_load = ureq->actual; + + /* + * Note, trying to clear the NAK here causes problems with transmit + * on the S3C6400 ending up with the TXFIFO becoming full. + */ + + /* check ep is enabled */ + if (!(dwc2_readl(dwc2, epctrl_reg) & DXEPCTL_EPENA)) + dwc2_dbg(dwc2, + "ep%d: failed to become enabled (DXEPCTL=0x%08x)?\n", + index, dwc2_readl(dwc2, epctrl_reg)); + + dwc2_dbg(dwc2, "%s: DXEPCTL=0x%08x\n", + __func__, dwc2_readl(dwc2, epctrl_reg)); + + /* enable ep interrupts */ + dwc2_hsotg_ctrl_epint(dwc2, hs_ep->epnum, hs_ep->dir_in, 1); +} + +/* conversion functions */ +static inline struct dwc2_request *our_req(struct usb_request *req) +{ + return container_of(req, struct dwc2_request, req); +} + +static inline struct dwc2_ep *our_ep(struct usb_ep *ep) +{ + return container_of(ep, struct dwc2_ep, ep); +} + + +/** + * dwc2_ep0_mps - turn max packet size into register setting + * @mps: The maximum packet size in bytes. + */ +static u32 dwc2_ep0_mps(unsigned int mps) +{ + switch (mps) { + case 64: + return D0EPCTL_MPS_64; + case 32: + return D0EPCTL_MPS_32; + case 16: + return D0EPCTL_MPS_16; + case 8: + return D0EPCTL_MPS_8; + } + + /* bad max packet size, warn and return invalid result */ + WARN_ON(1); + return (u32)-1; +} + +/** + * dwc2_set_ep_maxpacket - set endpoint's max-packet field + * @dwc2: The driver state. + * @ep: The index number of the endpoint + * @mps: The maximum packet size in bytes + * @mc: The multicount value + * @dir_in: True if direction is in. + * + * Configure the maximum packet size for the given endpoint, updating + * the hardware control registers to reflect this. + */ +static void dwc2_set_ep_maxpacket(struct dwc2 *dwc2, + unsigned int ep, unsigned int mps, + unsigned int mc, unsigned int dir_in) +{ + struct dwc2_ep *hs_ep; + u32 reg; + + hs_ep = index_to_ep(dwc2, ep, dir_in); + if (!hs_ep) + return; + + if (ep == 0) { + u32 mps_bytes = mps; + + /* EP0 is a special case */ + mps = dwc2_ep0_mps(mps_bytes); + if (mps > 3) + goto bad_mps; + hs_ep->ep.maxpacket = mps_bytes; + hs_ep->mc = 1; + } else { + if (mps > 1024) + goto bad_mps; + hs_ep->mc = mc; + if (mc > 3) + goto bad_mps; + hs_ep->ep.maxpacket = mps; + } + + if (dir_in) { + reg = dwc2_readl(dwc2, DIEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mps; + dwc2_writel(dwc2, reg, DIEPCTL(ep)); + } else { + reg = dwc2_readl(dwc2, DOEPCTL(ep)); + reg &= ~DXEPCTL_MPS_MASK; + reg |= mps; + dwc2_writel(dwc2, reg, DOEPCTL(ep)); + } + + return; + +bad_mps: + dwc2_err(dwc2, "ep%d: bad mps of %d\n", ep, mps); +} + +static int dwc2_ep_enable(struct usb_ep *ep, + const struct usb_endpoint_descriptor *desc) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + unsigned long flags; + unsigned int index = hs_ep->epnum; + u32 epctrl_reg; + u32 epctrl; + u32 mps; + u32 mc; + u32 mask; + unsigned int dir_in; + unsigned int i, val, size; + int ret = 0; + unsigned char ep_type; + + dwc2_dbg(dwc2, + "%s: ep %s: a 0x%02x, attr 0x%02x, mps 0x%04x, intr %d\n", + __func__, ep->name, desc->bEndpointAddress, desc->bmAttributes, + desc->wMaxPacketSize, desc->bInterval); + + /* not to be called for EP0 */ + if (index == 0) { + dwc2_err(dwc2, "%s: called for EP 0\n", __func__); + return -EINVAL; + } + + dir_in = (desc->bEndpointAddress & USB_ENDPOINT_DIR_MASK) ? 1 : 0; + if (dir_in != hs_ep->dir_in) { + dwc2_err(dwc2, "%s: direction mismatch!\n", __func__); + return -EINVAL; + } + + ep_type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + mps = usb_endpoint_maxp(desc) & USB_ENDPOINT_MAXP_MASK; + mc = USB_EP_MAXP_MULT(usb_endpoint_maxp(desc)); + + /* note, we handle this here instead of dwc2_set_ep_maxpacket */ + epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + epctrl = dwc2_readl(dwc2, epctrl_reg); + + dwc2_dbg(dwc2, "%s: read DxEPCTL=0x%08x from 0x%08x\n", + __func__, epctrl, epctrl_reg); + + spin_lock_irqsave(&dwc2->lock, flags); + + epctrl &= ~(DXEPCTL_EPTYPE_MASK | DXEPCTL_MPS_MASK); + epctrl |= DXEPCTL_MPS(mps); + + /* + * mark the endpoint as active, otherwise the core may ignore + * transactions entirely for this endpoint + */ + epctrl |= DXEPCTL_USBACTEP; + + /* update the endpoint state */ + dwc2_set_ep_maxpacket(dwc2, index, mps, mc, dir_in); + + /* default, set to non-periodic */ + hs_ep->isochronous = 0; + hs_ep->periodic = 0; + hs_ep->halted = 0; + hs_ep->interval = desc->bInterval; + + switch (ep_type) { + case USB_ENDPOINT_XFER_ISOC: + epctrl |= DXEPCTL_EPTYPE_ISO; + epctrl |= DXEPCTL_SETEVENFR; + hs_ep->isochronous = 1; + hs_ep->interval = 1 << (desc->bInterval - 1); + hs_ep->target_frame = TARGET_FRAME_INITIAL; + if (dir_in) { + hs_ep->periodic = 1; + mask = dwc2_readl(dwc2, DIEPMSK); + mask |= DIEPMSK_NAKMSK; + dwc2_writel(dwc2, mask, DIEPMSK); + } else { + mask = dwc2_readl(dwc2, DOEPMSK); + mask |= DOEPMSK_OUTTKNEPDISMSK; + dwc2_writel(dwc2, mask, DOEPMSK); + } + break; + + case USB_ENDPOINT_XFER_BULK: + epctrl |= DXEPCTL_EPTYPE_BULK; + break; + + case USB_ENDPOINT_XFER_INT: + if (dir_in) + hs_ep->periodic = 1; + + if (dwc2->gadget.speed == USB_SPEED_HIGH) + hs_ep->interval = 1 << (desc->bInterval - 1); + + epctrl |= DXEPCTL_EPTYPE_INTERRUPT; + break; + + case USB_ENDPOINT_XFER_CONTROL: + epctrl |= DXEPCTL_EPTYPE_CONTROL; + break; + } + + /* + * if the hardware has dedicated fifos, we must give each IN EP + * a unique tx-fifo even if it is non-periodic. + */ + if (dir_in && dwc2->dedicated_fifos) { + unsigned int fifo_count = dwc2_tx_fifo_count(dwc2); + u32 fifo_index = 0; + u32 fifo_size = UINT_MAX; + + size = hs_ep->ep.maxpacket * hs_ep->mc; + for (i = 1; i <= fifo_count; i++) { + if (dwc2->fifo_map & (1 << i)) + continue; + + val = dwc2_readl(dwc2, DPTXFSIZN(i)); + val = (val >> FIFOSIZE_DEPTH_SHIFT) * 4; + if (val < size) + continue; + /* Search for smallest acceptable fifo */ + if (val < fifo_size) { + fifo_size = val; + fifo_index = i; + } + } + if (!fifo_index) { + dwc2_err(dwc2, + "%s: No suitable fifo found\n", __func__); + ret = -ENOMEM; + goto error; + } + epctrl &= ~(DXEPCTL_TXFNUM_LIMIT << DXEPCTL_TXFNUM_SHIFT); + epctrl |= DXEPCTL_TXFNUM(fifo_index); + dwc2->fifo_map |= 1 << fifo_index; + hs_ep->fifo_index = fifo_index; + hs_ep->fifo_size = fifo_size; + } + + /* for non control endpoints, set PID to D0 */ + if (index && !hs_ep->isochronous) + epctrl |= DXEPCTL_SETD0PID; + + dwc2_dbg(dwc2, "%s: write DxEPCTL=0x%08x\n", + __func__, epctrl); + + dwc2_writel(dwc2, epctrl, epctrl_reg); + dwc2_dbg(dwc2, "%s: read DxEPCTL=0x%08x\n", + __func__, dwc2_readl(dwc2, epctrl_reg)); + + /* enable the endpoint interrupt */ + dwc2_hsotg_ctrl_epint(dwc2, index, dir_in, 1); + +error: + spin_unlock_irqrestore(&dwc2->lock, flags); + + return ret; +} + +static void dwc2_ep_stop_xfr(struct dwc2 *dwc2, struct dwc2_ep *hs_ep) +{ + int in = hs_ep->dir_in; + int epnum = hs_ep->epnum; + u32 epctl_reg = in ? DIEPCTL(epnum) : DOEPCTL(epnum); + u32 epint_reg = in ? DIEPINT(epnum) : DOEPINT(epnum); + + dwc2_dbg(dwc2, "%s: stopping transfer on %s\n", __func__, + hs_ep->name); + + if (in) { + if (dwc2->dedicated_fifos || hs_ep->periodic) { + dwc2_set_bit(dwc2, epctl_reg, DXEPCTL_SNAK); + /* Wait for Nak effect */ + if (dwc2_wait_bit_set(dwc2, epint_reg, + DXEPINT_INEPNAKEFF, 100)) + dwc2_warn(dwc2, + "%s: timeout DIEPINT.NAKEFF\n", + __func__); + } else { + dwc2_set_bit(dwc2, DCTL, DCTL_SGNPINNAK); + /* Wait for Nak effect */ + if (dwc2_wait_bit_set(dwc2, GINTSTS, + GINTSTS_GINNAKEFF, 100)) + dwc2_warn(dwc2, + "%s: timeout GINTSTS.GINNAKEFF\n", + __func__); + } + } else { + if (!(dwc2_readl(dwc2, GINTSTS) & GINTSTS_GOUTNAKEFF)) + dwc2_set_bit(dwc2, DCTL, DCTL_SGOUTNAK); + + /* Wait for global nak to take effect */ + if (dwc2_wait_bit_set(dwc2, GINTSTS, + GINTSTS_GOUTNAKEFF, 100)) + dwc2_warn(dwc2, "%s: timeout GINTSTS.GOUTNAKEFF\n", + __func__); + } + + /* Disable ep */ + dwc2_set_bit(dwc2, epctl_reg, DXEPCTL_EPDIS | DXEPCTL_SNAK); + + /* Wait for ep to be disabled */ + if (dwc2_wait_bit_set(dwc2, epint_reg, DXEPINT_EPDISBLD, 100)) + dwc2_warn(dwc2, "%s: timeout DOEPCTL.EPDisable\n", __func__); + + /* Clear EPDISBLD interrupt */ + dwc2_set_bit(dwc2, epint_reg, DXEPINT_EPDISBLD); + + if (in) { + unsigned short fifo_index; + + if (dwc2->dedicated_fifos || hs_ep->periodic) + fifo_index = hs_ep->fifo_index; + else + fifo_index = 0; + + dwc2_flush_tx_fifo(dwc2, fifo_index); + + /* Clear Global In NP NAK in Shared FIFO for non periodic ep */ + if (!dwc2->dedicated_fifos && !hs_ep->periodic) + dwc2_set_bit(dwc2, DCTL, DCTL_CGNPINNAK); + + } else { + /* Remove global NAKs */ + dwc2_set_bit(dwc2, DCTL, DCTL_CGOUTNAK); + } +} + +static int dwc2_ep_disable(struct usb_ep *ep) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + int dir_in = hs_ep->dir_in; + int index = hs_ep->epnum; + u32 epctrl_reg = dir_in ? DIEPCTL(index) : DOEPCTL(index); + u32 ctrl; + + dwc2_dbg(dwc2, "%s(ep %p)\n", __func__, ep); + + if (index == 0) { + dwc2_err(dwc2, "%s: called for ep0\n", __func__); + return -EINVAL; + } + + ctrl = dwc2_readl(dwc2, epctrl_reg); + if (ctrl & DXEPCTL_EPENA) + dwc2_ep_stop_xfr(dwc2, hs_ep); + + ctrl &= ~DXEPCTL_EPENA; + ctrl &= ~DXEPCTL_USBACTEP; + ctrl |= DXEPCTL_SNAK; + + dwc2_dbg(dwc2, "%s: DxEPCTL=0x%08x\n", __func__, ctrl); + dwc2_writel(dwc2, ctrl, epctrl_reg); + + /* disable endpoint interrupts */ + dwc2_hsotg_ctrl_epint(dwc2, index, hs_ep->dir_in, 0); + + /* terminate all requests with shutdown */ + kill_all_requests(dwc2, hs_ep, -ESHUTDOWN); + + dwc2->fifo_map &= ~(1 << hs_ep->fifo_index); + hs_ep->fifo_index = 0; + hs_ep->fifo_size = 0; + + return 0; +} + +static struct usb_request *dwc2_ep_alloc_req(struct usb_ep *ep) +{ + struct dwc2_request *req; + + req = kzalloc(sizeof(*req), GFP_KERNEL); + if (!req) + return NULL; + + INIT_LIST_HEAD(&req->queue); + + return &req->req; +} + +static void dwc2_ep_free_req(struct usb_ep *ep, struct usb_request *req) +{ + struct dwc2_request *hs_req = our_req(req); + + kfree(hs_req); +} + +/** + * dwc2_start_next_request - Starts next request from ep queue + * @hs_ep: Endpoint structure + * + * If queue is empty and EP is ISOC-OUT - unmasks OUTTKNEPDIS which is masked + * in its handler. Hence we need to unmask it here to be able to do + * resynchronization. + */ +static void dwc2_start_next_request(struct dwc2_ep *hs_ep) +{ + u32 mask; + struct dwc2 *dwc2 = hs_ep->dwc2; + int dir_in = hs_ep->dir_in; + struct dwc2_request *hs_req; + u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; + + dwc2_dbg(dwc2, "%s: next req\n", __func__); + + if (!list_empty(&hs_ep->queue)) { + hs_req = get_ep_head(hs_ep); + dwc2_gadget_start_req(dwc2, hs_ep, hs_req, false); + return; + } + if (!hs_ep->isochronous) + return; + + if (dir_in) { + dwc2_dbg(dwc2, "%s: No more ISOC-IN requests\n", __func__); + } else { + dwc2_dbg(dwc2, "%s: No more ISOC-OUT requests\n", __func__); + mask = dwc2_readl(dwc2, epmsk_reg); + mask |= DOEPMSK_OUTTKNEPDISMSK; + dwc2_writel(dwc2, mask, epmsk_reg); + } +} + +static int dwc2_ep_queue(struct usb_ep *ep, struct usb_request *req) +{ + + struct dwc2_request *hs_req = our_req(req); + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + bool first; + + dwc2_dbg(dwc2, "%s: req %p: %d@%p, noi=%d, zero=%d, snok=%d\n", + ep->name, req, req->length, req->buf, req->no_interrupt, + req->zero, req->short_not_ok); + + /* initialise status of the request */ + INIT_LIST_HEAD(&hs_req->queue); + req->actual = 0; + req->status = -EINPROGRESS; + + /* Don't queue ISOC request if length greater than mps*mc */ + if (hs_ep->isochronous && + req->length > (hs_ep->mc * hs_ep->ep.maxpacket)) { + dwc2_err(dwc2, "req length > maxpacket*mc\n"); + return -EINVAL; + } + + if ((long)req->buf & 3) + dwc2_err(dwc2, "dma buffer not aligned\n"); + + req->dma = dma_map_single(dwc2->dev, req->buf, req->length, + hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + + if (dma_mapping_error(dwc2->dev, req->dma)) { + dwc2_err(dwc2, "failed to map buffer\n"); + return -EFAULT; + } + + first = list_empty(&hs_ep->queue); + list_add_tail(&hs_req->queue, &hs_ep->queue); + + /* Change EP direction if status phase request is after data out */ + if (hs_ep->epnum == 0 && !req->length && !hs_ep->dir_in && + dwc2->ep0_state == DWC2_EP0_DATA_OUT) + hs_ep->dir_in = 1; + + if (first) { + if (!hs_ep->isochronous) { + dwc2_gadget_start_req(dwc2, hs_ep, hs_req, false); + return 0; + } + + /* Update current frame number value. */ + dwc2->frame_number = dwc2_read_frameno(dwc2); + while (dwc2_gadget_target_frame_elapsed(hs_ep)) { + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value once more as it + * changes here. + */ + dwc2->frame_number = dwc2_read_frameno(dwc2); + } + + if (hs_ep->target_frame != TARGET_FRAME_INITIAL) + dwc2_gadget_start_req(dwc2, hs_ep, hs_req, false); + } + return 0; +} + +static int dwc2_ep_dequeue(struct usb_ep *ep, struct usb_request *req) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + dwc2_warn(dwc2, "%s\n", __func__); + return -EOPNOTSUPP; +} + +static int dwc2_ep_set_halt(struct usb_ep *ep, int value) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + dwc2_warn(dwc2, "%s\n", __func__); + return -EOPNOTSUPP; +} + +static int dwc2_ep_set_wedge(struct usb_ep *ep) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + dwc2_warn(dwc2, "%s\n", __func__); + return -EOPNOTSUPP; +} + +static int dwc2_ep_fifo_status(struct usb_ep *ep) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + dwc2_warn(dwc2, "%s\n", __func__); + return -EOPNOTSUPP; +} + +static void dwc2_ep_fifo_flush(struct usb_ep *ep) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + dwc2_warn(dwc2, "%s\n", __func__); +} + +static const struct usb_ep_ops dwc2_ep_ops = { + .enable = dwc2_ep_enable, + .disable = dwc2_ep_disable, + .alloc_request = dwc2_ep_alloc_req, + .free_request = dwc2_ep_free_req, + .queue = dwc2_ep_queue, + .dequeue = dwc2_ep_dequeue, + .set_halt = dwc2_ep_set_halt, + .set_wedge = dwc2_ep_set_wedge, + .fifo_status = dwc2_ep_fifo_status, + .fifo_flush = dwc2_ep_fifo_flush, +}; + +static void dwc2_program_zlp(struct dwc2 *dwc2, struct dwc2_ep *hs_ep) +{ + u32 ctrl; + u8 index = hs_ep->epnum; + u32 epctl_reg = hs_ep->dir_in ? DIEPCTL(index) : DOEPCTL(index); + u32 epsiz_reg = hs_ep->dir_in ? DIEPTSIZ(index) : DOEPTSIZ(index); + + if (hs_ep->dir_in) + dwc2_dbg(dwc2, "Sending zero-length packet on ep%d\n", index); + else + dwc2_dbg(dwc2, "Receiving zero-length packet on ep%d\n", index); + + dwc2_writel(dwc2, DXEPTSIZ_MC(1) | DXEPTSIZ_PKTCNT(1) | + DXEPTSIZ_XFERSIZE(0), + epsiz_reg); + + ctrl = dwc2_readl(dwc2, epctl_reg); + ctrl |= DXEPCTL_CNAK; /* clear NAK set by core */ + ctrl |= DXEPCTL_EPENA; /* ensure ep enabled */ + ctrl |= DXEPCTL_USBACTEP; + dwc2_writel(dwc2, ctrl, epctl_reg); +} + +/** + * windex_to_ep - convert control wIndex value to endpoint + * @dwc2: The driver state. + * @windex: The control request wIndex field (in host order). + * + * Convert the given wIndex into a pointer to an driver endpoint + * structure, or return NULL if it is not a valid endpoint. + */ +static struct dwc2_ep *windex_to_ep(struct dwc2 *dwc2, u16 windex) +{ + struct dwc2_ep *ep; + int dir = (windex & USB_DIR_IN) ? 1 : 0; + int idx = windex & 0x7F; + + if (windex >= 0x100) + return NULL; + + if (idx >= dwc2->num_eps) + return NULL; + + ep = index_to_ep(dwc2, idx, dir); + + if (idx && ep->dir_in != dir) + return NULL; + + return ep; +} + +/** + * dwc2_hsotg_send_reply - send reply to control request + * @dwc2: The device state + * @buff: Buffer for request + * @length: Length of reply. + * + * Create a request and queue it on the given endpoint. This is useful as + * an internal method of sending replies to certain control requests, etc. + */ +static int dwc2_hsotg_send_reply(struct dwc2 *dwc2, void *buff, int length) +{ + struct dwc2_ep *ep0 = dwc2->eps_out[0]; + struct usb_request *req; + int ret; + + if (length == 0 && (dwc2->ep0_state == DWC2_EP0_STATUS_IN || + dwc2->ep0_state == DWC2_EP0_STATUS_OUT)) { + dwc2_program_zlp(dwc2, ep0); + return 0; + } + + dwc2_dbg(dwc2, "%s: buff %p, len %d\n", __func__, buff, length); + + req = dwc2_ep_alloc_req(&ep0->ep); + if (!req) { + dwc2_warn(dwc2, "%s: cannot alloc req\n", __func__); + return -ENOMEM; + } + + req->buf = dwc2->ep0_buff; + req->length = length; + /* + * zero flag is for sending zlp in DATA IN stage. It has no impact on + * STATUS stage. + */ + req->zero = 0; + req->complete = dwc2_ep_free_req; + + if (length) + memcpy(req->buf, buff, length); + + ret = dwc2_ep_queue(&ep0->ep, req); + if (ret) { + dwc2_warn(dwc2, "%s: cannot queue req\n", __func__); + return ret; + } + + return 0; +} + +/** + * dwc2_process_req_status - process request GET_STATUS + * @dwc2: The device state + * @ctrl: USB control request + */ +static int dwc2_process_req_status(struct dwc2 *dwc2, + struct usb_ctrlrequest *ctrl) +{ + struct dwc2_ep *ep0 = dwc2->eps_out[0]; + struct dwc2_ep *ep; + __le16 reply; + u16 status; + int ret; + + dwc2_dbg(dwc2, "%s: USB_REQ_GET_STATUS\n", __func__); + + if (!ep0->dir_in) { + dwc2_warn(dwc2, "%s: direction out?\n", __func__); + return -EINVAL; + } + + switch (ctrl->bRequestType & USB_RECIP_MASK) { + case USB_RECIP_DEVICE: + status = dwc2->is_selfpowered << USB_DEVICE_SELF_POWERED; + status |= 0 << USB_DEVICE_REMOTE_WAKEUP; + + reply = cpu_to_le16(status); + break; + + case USB_RECIP_INTERFACE: + /* currently, the data result should be zero */ + reply = cpu_to_le16(0); + break; + + case USB_RECIP_ENDPOINT: + ep = windex_to_ep(dwc2, le16_to_cpu(ctrl->wIndex)); + if (!ep) + return -ENOENT; + + reply = cpu_to_le16(ep->halted ? 1 : 0); + break; + + default: + return 0; + } + + if (le16_to_cpu(ctrl->wLength) != 2) + return -EINVAL; + + ret = dwc2_hsotg_send_reply(dwc2, &reply, 2); + if (ret) { + dwc2_err(dwc2, "%s: failed to send reply\n", __func__); + return ret; + } + + return 1; +} + +/** + * dwc2_process_req_feature - process request {SET,CLEAR}_FEATURE + * @dwc2: The device state + * @ctrl: USB control request + */ +static int dwc2_process_req_feature(struct dwc2 *dwc2, + struct usb_ctrlrequest *ctrl) +{ + struct dwc2_request *hs_req; + bool set = (ctrl->bRequest == USB_REQ_SET_FEATURE); + struct dwc2_ep *ep; + int ret; + bool halted; + u32 recip; + u16 wValue; + u16 wIndex; + + dwc2_dbg(dwc2, "%s: %s_FEATURE\n", __func__, set ? "SET" : "CLEAR"); + + wValue = le16_to_cpu(ctrl->wValue); + wIndex = le16_to_cpu(ctrl->wIndex); + recip = ctrl->bRequestType & USB_RECIP_MASK; + + switch (recip) { + case USB_RECIP_DEVICE: + switch (wValue) { + case USB_DEVICE_REMOTE_WAKEUP: + case USB_DEVICE_TEST_MODE: + /* Not supported */ + default: + return -ENOENT; + } + break; + + case USB_RECIP_ENDPOINT: + ep = windex_to_ep(dwc2, wIndex); + if (!ep) + return -ENOENT; + + switch (wValue) { + case USB_ENDPOINT_HALT: + halted = ep->halted; + + dwc2_ep_set_halt(&ep->ep, set); + + ret = dwc2_hsotg_send_reply(dwc2, NULL, 0); + if (ret) { + dwc2_err(dwc2, + "%s: failed to send reply\n", __func__); + return ret; + } + + /* + * we have to complete all requests for ep if it was + * halted, and the halt was cleared by CLEAR_FEATURE + */ + + if (!set && halted) { + /* + * If we have request in progress, + * then complete it + */ + if (ep->req) { + hs_req = ep->req; + ep->req = NULL; + list_del_init(&hs_req->queue); + if (hs_req->req.complete) { + spin_unlock(&dwc2->lock); + hs_req->req.complete( + &ep->ep, &hs_req->req); + spin_lock(&dwc2->lock); + } + } + + /* If we have pending request, then start it */ + if (!ep->req) + dwc2_start_next_request(ep); + } + + break; + + default: + return -ENOENT; + } + break; + default: + return -ENOENT; + } + return 1; +} + +static int dwc2_gadget_get_frame(struct usb_gadget *gadget) +{ + return dwc2_read_frameno(to_dwc2(gadget)); +} + +static void dwc2_core_disconnect(struct dwc2 *dwc2) +{ + u32 dctl; + + dctl = dwc2_readl(dwc2, DCTL); + /* set the soft-disconnect bit */ + dctl |= DCTL_SFTDISCON; + dwc2_writel(dwc2, dctl, DCTL); +} + +static void dwc2_core_connect(struct dwc2 *dwc2) +{ + u32 dctl; + + dctl = dwc2_readl(dwc2, DCTL); + /* clear the soft-disconnect bit */ + dctl &= ~DCTL_SFTDISCON; + dwc2_writel(dwc2, dctl, DCTL); +} + +static void dwc2_enqueue_setup(struct dwc2 *dwc2); + +/** + * dwc2_stall_ep0 - stall ep0 + * @dwc2: The device state + * + * Set stall for ep0 as response for setup request. + */ +static void dwc2_stall_ep0(struct dwc2 *dwc2) +{ + struct dwc2_ep *ep0 = dwc2->eps_out[0]; + u32 reg; + u32 ctrl; + + dwc2_dbg(dwc2, "ep0 stall (dir=%d)\n", ep0->dir_in); + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; + + /* + * DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ + + ctrl = dwc2_readl(dwc2, reg); + ctrl |= DXEPCTL_STALL; + ctrl |= DXEPCTL_CNAK; + dwc2_writel(dwc2, ctrl, reg); + + dwc2_dbg(dwc2, + "written DXEPCTL=0x%08x to %08x (DXEPCTL=0x%08x)\n", + ctrl, reg, dwc2_readl(dwc2, reg)); + + /* + * complete won't be called, so we enqueue + * setup request here + */ + dwc2_enqueue_setup(dwc2); +} + +/** + * dwc2_process_control - process a control request + * @dwc2: The device state + * @ctrl: The control request received + * + * The controller has received the SETUP phase of a control request, and + * needs to work out what to do next (and whether to pass it on to the + * gadget driver). + */ +static void dwc2_process_control(struct dwc2 *dwc2, + struct usb_ctrlrequest *ctrl) +{ + struct dwc2_ep *ep0 = dwc2->eps_out[0]; + int handled = false; + int ret = 0; + + dwc2_dbg(dwc2, + "ctrl Type=%02x, Req=%02x, V=%04x, I=%04x, L=%04x\n", + ctrl->bRequestType, ctrl->bRequest, ctrl->wValue, + ctrl->wIndex, ctrl->wLength); + + if (ctrl->wLength == 0) { + ep0->dir_in = 1; + dwc2->ep0_state = DWC2_EP0_STATUS_IN; + } else if (ctrl->bRequestType & USB_DIR_IN) { + ep0->dir_in = 1; + dwc2->ep0_state = DWC2_EP0_DATA_IN; + } else { + ep0->dir_in = 0; + dwc2->ep0_state = DWC2_EP0_DATA_OUT; + } + + if ((ctrl->bRequestType & USB_TYPE_MASK) == USB_TYPE_STANDARD) { + switch (ctrl->bRequest) { + case USB_REQ_SET_ADDRESS: + dwc2->connected = 1; + dwc2_dcfg_set_addr(dwc2, le16_to_cpu(ctrl->wValue)); + ret = dwc2_hsotg_send_reply(dwc2, NULL, 0); + handled = true; + dwc2_info(dwc2, "new address %d\n", ctrl->wValue); + break; + + case USB_REQ_GET_STATUS: + ret = dwc2_process_req_status(dwc2, ctrl); + handled = true; + break; + + case USB_REQ_CLEAR_FEATURE: + case USB_REQ_SET_FEATURE: + ret = dwc2_process_req_feature(dwc2, ctrl); + handled = true; + break; + } + } + + /* as a fallback, try delivering it to the driver to deal with */ + if (!handled && dwc2->driver) { + spin_unlock(&dwc2->lock); + ret = dwc2->driver->setup(&dwc2->gadget, ctrl); + spin_lock(&dwc2->lock); + if (ret < 0) + dwc2_dbg(dwc2, "driver->setup() ret %d\n", ret); + } + + /* + * the request is either unhandlable, or is not formatted correctly + * so respond with a STALL for the status stage to indicate failure. + */ + + if (ret < 0) { + dwc2_dbg(dwc2, "unhandled ctrl request "); + dwc2_stall_ep0(dwc2); + } +} + +/** + * dwc2_complete_setup - completion of a setup transfer + * @ep: The endpoint the request was on. + * @req: The request completed. + * + * Called on completion of any requests the driver itself submitted for + * EP0 setup packets + */ +static void dwc2_complete_setup(struct usb_ep *ep, struct usb_request *req) +{ + struct dwc2_ep *hs_ep = our_ep(ep); + struct dwc2 *dwc2 = hs_ep->dwc2; + + if (req->status < 0) { + dwc2_dbg(dwc2, "%s: failed %d\n", __func__, req->status); + return; + } + + spin_lock(&dwc2->lock); + if (req->actual == 0) + dwc2_enqueue_setup(dwc2); + else + dwc2_process_control(dwc2, req->buf); + spin_unlock(&dwc2->lock); +} + +static void dwc2_enqueue_setup(struct dwc2 *dwc2) +{ + struct usb_request *req = dwc2->ctrl_req; + struct dwc2_request *hs_req = our_req(req); + int ret; + + dwc2_dbg(dwc2, "%s: queueing setup request\n", __func__); + + req->zero = 0; + req->length = 8; + req->buf = dwc2->ctrl_buff; + req->complete = dwc2_complete_setup; + + if (!list_empty(&hs_req->queue)) { + dwc2_dbg(dwc2, "%s already queued???\n", __func__); + return; + } + + dwc2->eps_out[0]->dir_in = 0; + dwc2->eps_out[0]->send_zlp = 0; + dwc2->ep0_state = DWC2_EP0_SETUP; + + ret = dwc2_ep_queue(&dwc2->eps_out[0]->ep, req); + if (ret < 0) { + dwc2_err(dwc2, "%s: failed queue (%d)\n", __func__, ret); + /* + * Don't think there's much we can do other than watch the + * driver fail. + */ + } +} + +/** + * dwc2_complete_request - complete a request given to us + * @dwc2: The device state. + * @hs_ep: The endpoint the request was on. + * @hs_req: The request to complete. + * @result: The result code (0 => Ok, otherwise errno) + * + * The given request has finished, so call the necessary completion + * if it has one and then look to see if we can start a new request + * on the endpoint. + * + * Note, expects the ep to already be locked as appropriate. + */ +static void dwc2_complete_request(struct dwc2 *dwc2, struct dwc2_ep *hs_ep, + struct dwc2_request *hs_req, int status) +{ + if (!hs_req) { + dwc2_dbg(dwc2, "%s: nothing to complete?\n", __func__); + return; + } + + dwc2_dbg(dwc2, "complete: ep %p %s, req %p, %d => %p\n", + hs_ep, hs_ep->ep.name, hs_req, status, hs_req->req.complete); + + /* + * only replace the status if we've not already set an error + * from a previous transaction + */ + + if (hs_req->req.status == -EINPROGRESS) + hs_req->req.status = status; + + dma_unmap_single(dwc2->dev, hs_req->req.dma, hs_req->req.length, + hs_ep->dir_in ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + hs_ep->req = NULL; + list_del_init(&hs_req->queue); + + /* + * call the complete request with the locks off, just in case the + * request tries to queue more work for this endpoint. + */ + + if (hs_req->req.complete) { + spin_unlock(&dwc2->lock); + hs_req->req.complete(&hs_ep->ep, &hs_req->req); + spin_lock(&dwc2->lock); + } + + /* + * Look to see if there is anything else to do. Note, the completion + * of the previous request may have caused a new request to be started + * so be careful when doing this. + */ + dwc2_dbg(dwc2, "%s: req %p, status %d\n", __func__, hs_ep->req, status); + if (!hs_ep->req && status >= 0) + dwc2_start_next_request(hs_ep); +} + +/** + * dwc2_handle_outdone - handle receiving OutDone/SetupDone from RXFIFO + * @dwc2: The device instance + * @epnum: The endpoint received from + * + * The RXFIFO has delivered an OutDone event, which means that the data + * transfer for an OUT endpoint has been completed, either by a short + * packet or by the finish of a transfer. + */ +static void dwc2_handle_outdone(struct dwc2 *dwc2, int epnum) +{ + u32 epsize = dwc2_readl(dwc2, DOEPTSIZ(epnum)); + struct dwc2_ep *hs_ep = dwc2->eps_out[epnum]; + struct dwc2_request *hs_req = hs_ep->req; + struct usb_request *req = &hs_req->req; + unsigned int size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + int result = 0; + + if (!hs_req) { + dwc2_dbg(dwc2, "%s: no request active\n", __func__); + return; + } + + if (epnum == 0 && dwc2->ep0_state == DWC2_EP0_STATUS_OUT) { + dwc2_dbg(dwc2, "zlp packet received\n"); + dwc2_complete_request(dwc2, hs_ep, hs_req, 0); + dwc2_enqueue_setup(dwc2); + return; + } + + if (using_dma(dwc2)) { + unsigned int size_done; + + /* + * Calculate the size of the transfer by checking how much + * is left in the endpoint size register and then working it + * out from the amount we loaded for the transfer. + * + * We need to do this as DMA pointers are always 32bit aligned + * so may overshoot/undershoot the transfer. + */ + size_done = hs_ep->size_loaded - size_left; + size_done += hs_ep->last_load; + + req->actual = size_done; + } + + if (req->actual < req->length && size_left == 0) { + dwc2_gadget_start_req(dwc2, hs_ep, hs_req, true); + return; + } + + if (req->actual < req->length && req->short_not_ok) { + dwc2_dbg(dwc2, "%s: got %d/%d (short not ok) => error\n", + __func__, req->actual, req->length); + + /* + * todo - what should we return here? there's no one else + * even bothering to check the status. + */ + } + + if (epnum == 0 && dwc2->ep0_state == DWC2_EP0_DATA_OUT) { + /* Move to STATUS IN */ + dwc2->eps_out[0]->dir_in = 1; + dwc2->ep0_state = DWC2_EP0_STATUS_IN; + dwc2_program_zlp(dwc2, dwc2->eps_out[0]); + } + + /* + * Slave mode OUT transfers do not go through XferComplete so + * adjust the ISOC parity here. + */ +#if 0 + if (!using_dma(dwc2)) { + if (hs_ep->isochronous && hs_ep->interval == 1) + dwc2_hsotg_change_ep_iso_parity(dwc2, DOEPCTL(epnum)); + else if (hs_ep->isochronous && hs_ep->interval > 1) + dwc2_gadget_incr_frame_num(hs_ep); + } + + /* Set actual frame number for completed transfers */ + if (hs_ep->isochronous) + req->frame_number = dwc2->frame_number; +#endif + + dwc2_complete_request(dwc2, hs_ep, hs_req, result); +} + +/** + * kill_all_requests - remove all requests from the endpoint's queue + * @dwc2: The device state. + * @ep: The endpoint the requests may be on. + * @result: The result code to use. + * + * Go through the requests on the given endpoint and mark them + * completed with the given result code. + */ +static void kill_all_requests(struct dwc2 *dwc2, struct dwc2_ep *ep, int result) +{ + struct dwc2_request *req, *treq; + unsigned int size; + + ep->req = NULL; + + list_for_each_entry_safe(req, treq, &ep->queue, queue) + dwc2_complete_request(dwc2, ep, req, result); + + if (!dwc2->dedicated_fifos) + return; + size = (dwc2_readl(dwc2, DTXFSTS(ep->fifo_index)) & 0xffff) * 4; + if (size < ep->fifo_size) + dwc2_flush_tx_fifo(dwc2, ep->fifo_index); +} + +/** + * dwc2_gadget_disconnect - disconnect service + * @dwc2: The device state. + * + * The device has been disconnected. Remove all current + * transactions and signal the gadget driver that this + * has happened. + */ +static void dwc2_gadget_disconnect(struct dwc2 *dwc2) +{ + + unsigned int ep; + + if (!dwc2->connected) + return; + + dwc2->connected = 0; + + /* all endpoints should be shutdown */ + for (ep = 0; ep < dwc2->num_eps; ep++) { + if (dwc2->eps_in[ep]) + kill_all_requests(dwc2, dwc2->eps_in[ep], -ESHUTDOWN); + if (dwc2->eps_out[ep]) + kill_all_requests(dwc2, dwc2->eps_out[ep], -ESHUTDOWN); + } + + spin_unlock(&dwc2->lock); + dwc2->driver->disconnect(&dwc2->gadget); + spin_lock(&dwc2->lock); + + usb_gadget_set_state(&dwc2->gadget, USB_STATE_NOTATTACHED); +} + +static void dwc2_gadget_setup_fifo(struct dwc2 *dwc2) +{ + unsigned int ep; + unsigned int addr; + u32 np_tx_fifo_size = dwc2->params.g_np_tx_fifo_size; + u32 rx_fifo_size = dwc2->params.g_rx_fifo_size; + u32 fifo_size = dwc2->hw_params.total_fifo_size; + u32 *tx_fifo_size = dwc2->params.g_tx_fifo_size; + u32 size, depth; + u32 txfsz; + + /* Reset fifo map if not correctly cleared during previous session */ + WARN_ON(dwc2->fifo_map); + dwc2->fifo_map = 0; + + /* set RX/NPTX FIFO sizes */ + dwc2_writel(dwc2, rx_fifo_size, GRXFSIZ); + size = rx_fifo_size << FIFOSIZE_STARTADDR_SHIFT; + size |= np_tx_fifo_size << FIFOSIZE_DEPTH_SHIFT; + dwc2_writel(dwc2, size, GNPTXFSIZ); + + /* + * arange all the rest of the TX FIFOs, as some versions of this + * block have overlapping default addresses. This also ensures + * that if the settings have been changed, then they are set to + * known values. + */ + + /* start at the end of the GNPTXFSIZ, rounded up */ + addr = rx_fifo_size + np_tx_fifo_size; + + /* + * Configure fifos sizes from provided configuration and assign + * them to endpoints dynamically according to maxpacket size value of + * given endpoint. + */ + + for (ep = 1; ep < dwc2->num_eps; ep++) { + txfsz = dwc2_readl(dwc2, DPTXFSIZN(ep)); + depth = tx_fifo_size[ep]; + + if (addr + depth > fifo_size) + dwc2_err(dwc2, "insufficient fifo memory\n"); + + txfsz = depth << FIFOSIZE_DEPTH_SHIFT; + txfsz |= addr & 0xffff; + dwc2_writel(dwc2, txfsz, DPTXFSIZN(ep)); + + addr += depth; + } + + dwc2_writel(dwc2, dwc2->hw_params.total_fifo_size | + addr << GDFIFOCFG_EPINFOBASE_SHIFT, + GDFIFOCFG); + + dwc2_flush_all_fifo(dwc2); +} + +static void dwc2_gadget_interrupt_init(struct dwc2 *dwc2) +{ + /* unmask subset of endpoint interrupts */ + dwc2_writel(dwc2, DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK | + DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK, + DIEPMSK); + + dwc2_writel(dwc2, DOEPMSK_SETUPMSK | DOEPMSK_AHBERRMSK | + DOEPMSK_EPDISBLDMSK | DOEPMSK_XFERCOMPLMSK, + DOEPMSK); + + dwc2_writel(dwc2, 0, DAINTMSK); +} + +/** + * dwc2_complete_in - complete IN transfer + * @dwc2: The device state. + * @hs_ep: The endpoint that has just completed. + * + * An IN transfer has been completed, update the transfer's state and then + * call the relevant completion routines. + */ +static void dwc2_complete_in(struct dwc2 *dwc2, struct dwc2_ep *hs_ep) +{ + struct dwc2_request *hs_req = hs_ep->req; + u32 epsize = dwc2_readl(dwc2, DIEPTSIZ(hs_ep->epnum)); + int size_left, size_done; + + if (!hs_req) { + dwc2_dbg(dwc2, "XferCompl but no req\n"); + return; + } + + /* Finish ZLP handling for IN EP0 transactions */ + if (hs_ep->epnum == 0 && dwc2->ep0_state == DWC2_EP0_STATUS_IN) { + dwc2_dbg(dwc2, "zlp packet sent\n"); + /* + * While send zlp for DWC2_EP0_STATUS_IN EP direction was + * changed to IN. Change back to complete OUT transfer request + */ + hs_ep->dir_in = 0; + dwc2_complete_request(dwc2, hs_ep, hs_req, 0); + dwc2_enqueue_setup(dwc2); + return; + } + + /* + * Calculate the size of the transfer by checking how much is left + * in the endpoint size register and then working it out from + * the amount we loaded for the transfer. + * + * We do this even for DMA, as the transfer may have incremented + * past the end of the buffer (DMA transfers are always 32bit + * aligned). + */ + size_left = DXEPTSIZ_XFERSIZE_GET(epsize); + + size_done = hs_ep->size_loaded - size_left; + size_done += hs_ep->last_load; + + if (hs_req->req.actual != size_done) + dwc2_dbg(dwc2, "%s: adjusting size done %d => %d\n", + __func__, hs_req->req.actual, size_done); + + hs_req->req.actual = size_done; + dwc2_dbg(dwc2, "req->length:%d req->actual:%d req->zero:%d\n", + hs_req->req.length, hs_req->req.actual, hs_req->req.zero); + + if (!size_left && hs_req->req.actual < hs_req->req.length) { + dwc2_dbg(dwc2, "%s trying more for req...\n", __func__); + dwc2_gadget_start_req(dwc2, hs_ep, hs_req, true); + return; + } + + /* Zlp for all endpoints, for ep0 only in DATA IN stage */ + if (hs_ep->send_zlp) { + dwc2_program_zlp(dwc2, hs_ep); + hs_ep->send_zlp = 0; + /* transfer will be completed on next complete interrupt */ + return; + } + + if (hs_ep->epnum == 0 && dwc2->ep0_state == DWC2_EP0_DATA_IN) { + /* Move to STATUS OUT */ + dwc2->eps_out[0]->dir_in = 0; + dwc2->ep0_state = DWC2_EP0_STATUS_OUT; + dwc2_program_zlp(dwc2, dwc2->eps_out[0]); + return; + } + + dwc2_complete_request(dwc2, hs_ep, hs_req, 0); +} + +/** + * dwc2_core_gadget_init - issue softreset to the core + * @dwc2: The device state + * @usb_reset: Usb resetting flag + * + * Issue a soft reset to the core, and await the core finishing it. + */ +static void dwc2_core_gadget_init(struct dwc2 *dwc2, bool usb_reset) +{ + u32 intmsk; + u32 dctl; + u32 usbcfg; + u32 dcfg; + int ep; + + /* Kill any ep0 requests as controller will be reinitialized */ + kill_all_requests(dwc2, dwc2->eps_out[0], -ECONNRESET); + + if (!usb_reset) { + if (dwc2_core_reset(dwc2)) + return; + } else { + /* all endpoints should be shutdown */ + for (ep = 1; ep < dwc2->num_eps; ep++) { + if (dwc2->eps_in[ep]) + dwc2_ep_disable(&dwc2->eps_in[ep]->ep); + if (dwc2->eps_out[ep]) + dwc2_ep_disable(&dwc2->eps_out[ep]->ep); + } + } + + /* + * we must now enable ep0 ready for host detection and then + * set configuration. + */ + + /* keep other bits untouched (so e.g. forced modes are not lost) */ + usbcfg = dwc2_readl(dwc2, GUSBCFG); + usbcfg &= ~GUSBCFG_TOUTCAL_MASK; + usbcfg |= GUSBCFG_TOUTCAL(7); + dwc2_writel(dwc2, usbcfg, GUSBCFG); + + dwc2_phy_init(dwc2, true); + + dwc2_gadget_setup_fifo(dwc2); + + if (!usb_reset) + dwc2_core_disconnect(dwc2); + + dcfg = DCFG_EPMISCNT(1); + + if (dwc2->params.speed == DWC2_SPEED_PARAM_LOW) { + dcfg |= DCFG_DEVSPD_LS; + } else if (dwc2->params.speed == DWC2_SPEED_PARAM_FULL && + dwc2->params.phy_type == DWC2_PHY_TYPE_PARAM_FS) { + dcfg |= DCFG_DEVSPD_FS48; + } else if (dwc2->params.speed == DWC2_SPEED_PARAM_FULL && + dwc2->params.phy_type != DWC2_PHY_TYPE_PARAM_FS) { + dcfg |= DCFG_DEVSPD_FS; + } + + if (dwc2->params.ipg_isoc_en) + dcfg |= DCFG_IPG_ISOC_SUPPORDED; + + dwc2_writel(dwc2, dcfg, DCFG); + + /* Clear any pending OTG interrupts */ + dwc2_writel(dwc2, 0xffffffff, GOTGINT); + + /* Clear any pending interrupts */ + dwc2_writel(dwc2, 0xffffffff, GINTSTS); + intmsk = GINTSTS_ERLYSUSP | + GINTSTS_GOUTNAKEFF | GINTSTS_GINNAKEFF | + GINTSTS_USBRST | GINTSTS_RESETDET | + GINTSTS_ENUMDONE | + GINTSTS_USBSUSP | GINTSTS_WKUPINT | + GINTSTS_LPMTRANRCVD; + + intmsk |= GINTSTS_INCOMPL_SOIN | GINTSTS_INCOMPL_SOOUT; + + /* enable in and out endpoint interrupts */ + intmsk |= GINTSTS_OEPINT | GINTSTS_IEPINT; + + /* + * Enable the RXFIFO when in slave mode, as this is how we collect + * the data. In DMA mode, we get events from the FIFO but also + * things we cannot process, so do not use it. + */ + if (!using_dma(dwc2)) + intmsk |= GINTSTS_RXFLVL; + + if (!dwc2->params.external_id_pin_ctl) + intmsk |= GINTSTS_CONIDSTSCHNG; + + dwc2_writel(dwc2, intmsk, GINTMSK); + + dwc2_gahbcfg_init(dwc2); + + /* + * If INTknTXFEmpMsk is enabled, it's important to disable ep interrupts + * when we have no data to transfer. Otherwise we get being flooded by + * interrupts. + */ + intmsk = DIEPMSK_EPDISBLDMSK | DIEPMSK_XFERCOMPLMSK | + DIEPMSK_TIMEOUTMSK | DIEPMSK_AHBERRMSK; + + if (dwc2->dedicated_fifos && !using_dma(dwc2)) + intmsk |= DIEPMSK_TXFIFOEMPTY | DIEPMSK_INTKNTXFEMPMSK; + + dwc2_writel(dwc2, intmsk, DIEPMSK); + + /* + * don't need XferCompl, we get that from RXFIFO in slave mode. In + * DMA mode we may need this and StsPhseRcvd. + */ + intmsk = DOEPMSK_EPDISBLDMSK | DOEPMSK_AHBERRMSK | DOEPMSK_SETUPMSK; + if (using_dma(dwc2)) + intmsk |= DIEPMSK_XFERCOMPLMSK | DOEPMSK_STSPHSERCVDMSK; + dwc2_writel(dwc2, intmsk, DOEPMSK); + + dwc2_writel(dwc2, 0, DAINTMSK); + + dwc2_dbg(dwc2, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + dwc2_readl(dwc2, DIEPCTL0), + dwc2_readl(dwc2, DOEPCTL0)); + + /* Enable interrupts for EP0 in and out */ + dwc2_hsotg_ctrl_epint(dwc2, 0, 0, 1); + dwc2_hsotg_ctrl_epint(dwc2, 0, 1, 1); + dwc2_dbg(dwc2, "DAINTMSK=0x%08x\n", dwc2_readl(dwc2, DAINTMSK)); + + if (!usb_reset) { + dctl = dwc2_readl(dwc2, DCTL); + dwc2_writel(dwc2, dctl | DCTL_PWRONPRGDONE, DCTL); + + udelay(10); /* see openiboot */ + + dctl = dwc2_readl(dwc2, DCTL); + dwc2_writel(dwc2, dctl & ~DCTL_PWRONPRGDONE, DCTL); + } + + dwc2_dbg(dwc2, "DCTL=0x%08x\n", dwc2_readl(dwc2, DCTL)); + + /* + * DxEPCTL_USBActEp says RO in manual, but seems to be set by + * writing to the EPCTL register.. + */ + dwc2_writel(dwc2, dwc2_ep0_mps(dwc2->eps_out[0]->ep.maxpacket) | + DXEPCTL_CNAK | DXEPCTL_EPENA | + DXEPCTL_USBACTEP, DOEPCTL0); + + /* enable, but don't activate EP0in */ + dwc2_writel(dwc2, dwc2_ep0_mps(dwc2->eps_out[0]->ep.maxpacket) | + DXEPCTL_USBACTEP, DIEPCTL0); + + /* clear global NAKs */ + dctl = dwc2_readl(dwc2, DCTL); + dctl |= DCTL_CGOUTNAK | DCTL_CGNPINNAK; + + if (!usb_reset) + dctl |= DCTL_SFTDISCON; + dwc2_writel(dwc2, dctl, DCTL); + + /* must be at-least 3ms to allow bus to see disconnect */ + mdelay(3); +} + +/** + * dwc2_set_selfpowered - set if device is self/bus powered + * @gadget: The usb gadget state + * @is_selfpowered: Whether the device is self-powered + * + * Set if the device is self or bus powered. + */ +static int dwc2_set_selfpowered(struct usb_gadget *gadget, int is_selfpowered) +{ + struct dwc2 *dwc2 = to_dwc2(gadget); + + dwc2->is_selfpowered = !!is_selfpowered; + + return 0; +} + +/** + * dwc2_gadget_pullup - connect/disconnect the USB PHY + * @gadget: The usb gadget state + * @is_on: Current state of the USB PHY + * + * Connect/Disconnect the USB PHY pullup + */ +static int dwc2_gadget_pullup(struct usb_gadget *gadget, int is_on) +{ + struct dwc2 *dwc2 = to_dwc2(gadget); + unsigned long flags = 0; + + dwc2_dbg(dwc2, "%s: is_on: %d\n", __func__, is_on); + + dwc2->enabled = is_on; + /* Don't modify pullup state while in host mode */ + if (dwc2_is_host_mode(dwc2)) { + WARN_ON(dwc2_is_host_mode(dwc2)); + return -EINVAL; + } + + spin_lock_irqsave(&dwc2->lock, flags); + if (is_on) { + dwc2_core_gadget_init(dwc2, false); + /* Enable ACG feature in device mode,if supported */ + dwc2_core_connect(dwc2); + } else { + dwc2_core_disconnect(dwc2); + dwc2_gadget_disconnect(dwc2); + } + + dwc2->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&dwc2->lock, flags); + + return 0; +} + +static int dwc2_gadget_vbus_session(struct usb_gadget *gadget, int is_active) +{ + struct dwc2 *dwc2 = to_dwc2(gadget); + unsigned long flags; + + dwc2_dbg(dwc2, "%s: is_active: %d\n", __func__, is_active); + spin_lock_irqsave(&dwc2->lock, flags); + + if (is_active) { + dwc2_core_gadget_init(dwc2, false); + if (dwc2->enabled) + dwc2_core_connect(dwc2); + } else { + dwc2_core_disconnect(dwc2); + dwc2_gadget_disconnect(dwc2); + } + + spin_unlock_irqrestore(&dwc2->lock, flags); + return 0; +} + + +/** + * dwc2_handle_ep_disabled - handle DXEPINT_EPDISBLD + * @hs_ep: The endpoint on which interrupt is asserted. + * + * This interrupt indicates that the endpoint has been disabled per the + * application's request. + * + * For IN endpoints flushes txfifo, in case of BULK clears DCTL_CGNPINNAK, + * in case of ISOC completes current request. + * + * For ISOC-OUT endpoints completes expired requests. If there is remaining + * request starts it. + */ +static void dwc2_handle_ep_disabled(struct dwc2_ep *hs_ep) +{ + struct dwc2 *dwc2 = hs_ep->dwc2; + struct dwc2_request *hs_req; + unsigned char idx = hs_ep->epnum; + int dir_in = hs_ep->dir_in; + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + int dctl = dwc2_readl(dwc2, DCTL); + + dwc2_dbg(dwc2, "%s: EPDisbld\n", __func__); + + if (dir_in) { + int epctl = dwc2_readl(dwc2, epctl_reg); + + dwc2_flush_tx_fifo(dwc2, hs_ep->fifo_index); + + if (hs_ep->isochronous) { + dwc2_complete_in(dwc2, hs_ep); + return; + } + + if ((epctl & DXEPCTL_STALL) && (epctl & DXEPCTL_EPTYPE_BULK)) { + int dctl = dwc2_readl(dwc2, DCTL); + + dctl |= DCTL_CGNPINNAK; + dwc2_writel(dwc2, dctl, DCTL); + } + return; + } + + if (dctl & DCTL_GOUTNAKSTS) { + dctl |= DCTL_CGOUTNAK; + dwc2_writel(dwc2, dctl, DCTL); + } + + if (!hs_ep->isochronous) + return; + + if (list_empty(&hs_ep->queue)) { + dwc2_dbg(dwc2, "%s: complete_ep 0x%p, ep->queue empty!\n", + __func__, hs_ep); + return; + } + + do { + hs_req = get_ep_head(hs_ep); + if (hs_req) + dwc2_complete_request(dwc2, hs_ep, hs_req, -ENODATA); + dwc2_gadget_incr_frame_num(hs_ep); + /* Update current frame number value. */ + dwc2->frame_number = dwc2_read_frameno(dwc2); + } while (dwc2_gadget_target_frame_elapsed(hs_ep)); + + dwc2_start_next_request(hs_ep); +} + +/** + * dwc2_handle_out_token_ep_disabled - handle DXEPINT_OUTTKNEPDIS + * @ep: The endpoint on which interrupt is asserted. + * + * This is starting point for ISOC-OUT transfer, synchronization done with + * first out token received from host while corresponding EP is disabled. + * + * Device does not know initial frame in which out token will come. For this + * HW generates OUTTKNEPDIS - out token is received while EP is disabled. Upon + * getting this interrupt SW starts calculation for next transfer frame. + */ +static void dwc2_handle_out_token_ep_disabled(struct dwc2_ep *ep) +{ + struct dwc2 *dwc2 = ep->dwc2; + int dir_in = ep->dir_in; + u32 doepmsk; + u32 ctrl; + + dwc2_dbg(dwc2, "%s\n", __func__); + + if (dir_in || !ep->isochronous) + return; + + if (ep->interval > 1 && ep->target_frame == TARGET_FRAME_INITIAL) { + ep->target_frame = dwc2->frame_number; + + dwc2_gadget_incr_frame_num(ep); + + ctrl = dwc2_readl(dwc2, DOEPCTL(ep->epnum)); + + if (ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + + dwc2_writel(dwc2, ctrl, DOEPCTL(ep->epnum)); + } + + dwc2_start_next_request(ep); + + doepmsk = dwc2_readl(dwc2, DOEPMSK); + doepmsk &= ~DOEPMSK_OUTTKNEPDISMSK; + dwc2_writel(dwc2, doepmsk, DOEPMSK); +} + +/** + * dwc2_handle_nak - handle NAK interrupt + * @hs_ep: The endpoint on which interrupt is asserted. + * + * This is starting point for ISOC-IN transfer, synchronization done with + * first IN token received from host while corresponding EP is disabled. + * + * Device does not know when first one token will arrive from host. On first + * token arrival HW generates 2 interrupts: 'in token received while FIFO empty' + * and 'NAK'. NAK interrupt for ISOC-IN means that token has arrived and ZLP was + * sent in response to that as there was no data in FIFO. SW is basing on this + * interrupt to obtain frame in which token has come and then based on the + * interval calculates next frame for transfer. + */ +static void dwc2_handle_nak(struct dwc2_ep *hs_ep) +{ + struct dwc2 *dwc2 = hs_ep->dwc2; + int dir_in = hs_ep->dir_in; + u32 ctrl; + + if (!dir_in || !hs_ep->isochronous) + return; + + if (hs_ep->target_frame == TARGET_FRAME_INITIAL) { + hs_ep->target_frame = dwc2->frame_number; + if (hs_ep->interval > 1) { + ctrl = dwc2_readl(dwc2, DIEPCTL(hs_ep->epnum)); + + if (hs_ep->target_frame & 0x1) + ctrl |= DXEPCTL_SETODDFR; + else + ctrl |= DXEPCTL_SETEVENFR; + + dwc2_writel(dwc2, ctrl, DIEPCTL(hs_ep->epnum)); + } + + dwc2_complete_request(dwc2, hs_ep, get_ep_head(hs_ep), 0); + } + + dwc2_gadget_incr_frame_num(hs_ep); +} + +/** + * dwc2_handle_epint - handle an in/out endpoint interrupt + * @dwc2: The driver state + * @idx: The index for the endpoint (0..15) + * @dir_in: Set if this is an IN endpoint + * + * Process and clear any interrupt pending for an individual endpoint + */ +static void dwc2_handle_epint(struct dwc2 *dwc2, unsigned int idx, + int dir_in) +{ + struct dwc2_ep *hs_ep = index_to_ep(dwc2, idx, dir_in); + u32 epmsk_reg = dir_in ? DIEPMSK : DOEPMSK; + u32 epint_reg = dir_in ? DIEPINT(idx) : DOEPINT(idx); + u32 epctl_reg = dir_in ? DIEPCTL(idx) : DOEPCTL(idx); + u32 epsiz_reg = dir_in ? DIEPTSIZ(idx) : DOEPTSIZ(idx); + u32 ints; + u32 mask; + u32 ctrl; + + mask = dwc2_readl(dwc2, epmsk_reg); + if ((dwc2_readl(dwc2, DIEPEMPMSK) >> idx) & 1) + mask |= DIEPMSK_TXFIFOEMPTY; + mask |= DXEPINT_SETUP_RCVD; + + ints = dwc2_readl(dwc2, epint_reg); + + if (ints & DXEPINT_AHBERR) + dwc2_err(dwc2, "%s: AHBErr\n", __func__); + + ints &= mask; + + ctrl = dwc2_readl(dwc2, epctl_reg); + + /* Clear endpoint interrupts */ + dwc2_writel(dwc2, ints, epint_reg); + + if (!hs_ep) { + dwc2_err(dwc2, "%s:Interrupt for unconfigured ep%d(%s)\n", + __func__, idx, dir_in ? "in" : "out"); + return; + } + + dwc2_dbg(dwc2, "%s: ep%d(%s) DxEPINT=0x%08x\n", + __func__, idx, dir_in ? "in" : "out", ints); + + /* Don't process XferCompl interrupt if it is a setup packet */ + if (idx == 0 && (ints & (DXEPINT_SETUP | DXEPINT_SETUP_RCVD))) + ints &= ~DXEPINT_XFERCOMPL; + + if (ints & DXEPINT_XFERCOMPL) { + dwc2_dbg(dwc2, + "%s: XferCompl: DxEPCTL=0x%08x, DXEPTSIZ=%08x\n", + __func__, dwc2_readl(dwc2, epctl_reg), + dwc2_readl(dwc2, epsiz_reg)); + if (dir_in) { + /* + * We get OutDone from the FIFO, so we only + * need to look at completing IN requests here + * if operating slave mode + */ + if (hs_ep->isochronous && hs_ep->interval > 1) + dwc2_gadget_incr_frame_num(hs_ep); + + dwc2_complete_in(dwc2, hs_ep); + if (ints & DXEPINT_NAKINTRPT) + ints &= ~DXEPINT_NAKINTRPT; + + if (idx == 0 && !hs_ep->req) + dwc2_enqueue_setup(dwc2); + } else if (using_dma(dwc2)) { + /* + * We're using DMA, we need to fire an OutDone here + * as we ignore the RXFIFO. + */ + if (hs_ep->isochronous && hs_ep->interval > 1) + dwc2_gadget_incr_frame_num(hs_ep); + + dwc2_handle_outdone(dwc2, idx); + } + } + + if (ints & DXEPINT_EPDISBLD) + dwc2_handle_ep_disabled(hs_ep); + + if (ints & DXEPINT_OUTTKNEPDIS) + dwc2_handle_out_token_ep_disabled(hs_ep); + + if (ints & DXEPINT_NAKINTRPT) + dwc2_handle_nak(hs_ep); + + if (ints & DXEPINT_SETUP) { /* Setup or Timeout */ + dwc2_dbg(dwc2, "%s: Setup/Timeout\n", __func__); + + if (using_dma(dwc2) && idx == 0) { + /* + * this is the notification we've received a + * setup packet. In non-DMA mode we'd get this + * from the RXFIFO, instead we need to process + * the setup here. + */ + + if (!dir_in && dwc2->ep0_state == DWC2_EP0_SETUP) + dwc2_handle_outdone(dwc2, 0); + } + } + + if (ints & DXEPINT_STSPHSERCVD) + dwc2_dbg(dwc2, "%s: StsPhseRcvd\n", __func__); + + if (ints & DXEPINT_BACK2BACKSETUP) + dwc2_dbg(dwc2, "%s: B2BSetup/INEPNakEff\n", __func__); + + if (ints & DXEPINT_BNAINTR) { + dwc2_dbg(dwc2, "%s: BNA interrupt\n", __func__); +#if 0 + if (hs_ep->isochronous) + dwc2_handle_isoc_bna(hs_ep); +#endif + } + + if (dir_in && !hs_ep->isochronous) { + /* not sure if this is important, but we'll clear it anyway */ + if (ints & DXEPINT_INTKNTXFEMP) { + dwc2_dbg(dwc2, "%s: ep%d: INTknTXFEmpMsk\n", + __func__, idx); + } + + /* this probably means something bad is happening */ + if (ints & DXEPINT_INTKNEPMIS) { + dwc2_warn(dwc2, "%s: ep%d: INTknEP\n", + __func__, idx); + } + + /* FIFO has space or is empty (see GAHBCFG) */ + if (dwc2->dedicated_fifos && ints & DXEPINT_TXFEMP) { + dwc2_dbg(dwc2, "%s: ep%d: TxFIFOEmpty\n", + __func__, idx); + } + } +} + +/** + * dwc2_handle_enumdone - Handle EnumDone interrupt (enumeration done) + * @dwc2: The device state. + * + * Handle updating the device settings after the enumeration phase has + * been completed. + */ +static void dwc2_handle_enumdone(struct dwc2 *dwc2) +{ + u32 dsts = dwc2_readl(dwc2, DSTS); + int ep0_mps = 0, ep_mps = 8; + int i; + + /* + * This should signal the finish of the enumeration phase + * of the USB handshaking, so we should now know what rate + * we connected at. + */ + dwc2_dbg(dwc2, "EnumDone (DSTS=0x%08x)\n", dsts); + + /* + * note, since we're limited by the size of transfer on EP0, and + * it seems IN transfers must be a even number of packets we do + * not advertise a 64byte MPS on EP0. + */ + + /* catch both EnumSpd_FS and EnumSpd_FS48 */ + switch ((dsts & DSTS_ENUMSPD_MASK) >> DSTS_ENUMSPD_SHIFT) { + case DSTS_ENUMSPD_FS: + case DSTS_ENUMSPD_FS48: + dwc2->gadget.speed = USB_SPEED_FULL; + ep0_mps = 64; + ep_mps = 1023; + break; + case DSTS_ENUMSPD_HS: + dwc2->gadget.speed = USB_SPEED_HIGH; + ep0_mps = 64; + ep_mps = 1024; + break; + case DSTS_ENUMSPD_LS: + dwc2->gadget.speed = USB_SPEED_LOW; + ep0_mps = 8; + ep_mps = 8; + /* + * note, we don't actually support LS in this driver at the + * moment, and the documentation seems to imply that it isn't + * supported by the PHYs on some of the devices. + */ + break; + } + dwc2_dbg(dwc2, "new %s device\n", usb_speed_string(dwc2->gadget.speed)); + + /* + * we should now know the maximum packet size for an + * endpoint, so set the endpoints to a default value. + */ + if (ep0_mps) { + /* Initialize ep0 for both in and out directions */ + dwc2_set_ep_maxpacket(dwc2, 0, ep0_mps, 0, 1); + dwc2_set_ep_maxpacket(dwc2, 0, ep0_mps, 0, 0); + for (i = 1; i < dwc2->num_eps; i++) { + if (dwc2->eps_in[i]) + dwc2_set_ep_maxpacket(dwc2, i, ep_mps, 0, 1); + if (dwc2->eps_out[i]) + dwc2_set_ep_maxpacket(dwc2, i, ep_mps, 0, 0); + } + } + + /* ensure after enumeration our EP0 is active */ + dwc2_enqueue_setup(dwc2); + + dwc2_dbg(dwc2, "EP0: DIEPCTL0=0x%08x, DOEPCTL0=0x%08x\n", + dwc2_readl(dwc2, DIEPCTL0), + dwc2_readl(dwc2, DOEPCTL0)); +} + +/* IRQ flags which will trigger a retry around the IRQ loop */ +#define IRQ_RETRY_MASK (GINTSTS_NPTXFEMP | \ + GINTSTS_PTXFEMP | \ + GINTSTS_RXFLVL) + +static void dwc2_gadget_udc_poll(struct usb_gadget *gadget) +{ + struct dwc2 *dwc2 = to_dwc2(gadget); + int retry_count = 4; + u32 gintsts; + u32 gintmsk; + + if (!dwc2_is_device_mode(dwc2)) + return; + + spin_lock(&dwc2->lock); + +irq_retry: + gintsts = readl(dwc2->regs + GINTSTS); + gintmsk = readl(dwc2->regs + GINTMSK); + gintsts &= gintmsk; + + if (!gintsts) + return; + + dwc2_dbg(dwc2, "%s: %08x (%08x) retry %d\n", + __func__, gintsts, gintmsk, 4 - retry_count); + + if (gintsts & GINTSTS_RESETDET) { + dwc2_dbg(dwc2, "%s: USBRstDet\n", __func__); + dwc2_writel(dwc2, GINTSTS_RESETDET, GINTSTS); + } + + if (gintsts & (GINTSTS_USBRST | GINTSTS_RESETDET)) { + u32 usb_status = dwc2_readl(dwc2, GOTGCTL); + u32 connected = dwc2->connected; + + dwc2_dbg(dwc2, "%s: USBRst\n", __func__); + dwc2_dbg(dwc2, "GNPTXSTS=%08x\n", dwc2_readl(dwc2, GNPTXSTS)); + + dwc2_writel(dwc2, GINTSTS_USBRST, GINTSTS); + + /* Report disconnection if it is not already done. */ + dwc2_gadget_disconnect(dwc2); + + /* Reset device address to zero */ + dwc2_dcfg_set_addr(dwc2, 0); + + if (usb_status & GOTGCTL_BSESVLD && connected) + dwc2_core_gadget_init(dwc2, true); + } + + if (gintsts & GINTSTS_ENUMDONE) { + dwc2_writel(dwc2, GINTSTS_ENUMDONE, GINTSTS); + + dwc2_handle_enumdone(dwc2); + } + + if (gintsts & (GINTSTS_OEPINT | GINTSTS_IEPINT)) { + u32 daint = dwc2_readl(dwc2, DAINT); + u32 daintmsk = dwc2_readl(dwc2, DAINTMSK); + u32 daint_out, daint_in; + int ep; + + daint &= daintmsk; + daint_out = daint >> DAINT_OUTEP_SHIFT; + daint_in = daint & ~(daint_out << DAINT_OUTEP_SHIFT); + + dwc2_dbg(dwc2, "%s: daint=%08x\n", __func__, daint); + + for (ep = 0; ep < dwc2->num_eps && daint_out; + ep++, daint_out >>= 1) { + if (daint_out & 1) + dwc2_handle_epint(dwc2, ep, 0); + } + + for (ep = 0; ep < dwc2->num_eps && daint_in; + ep++, daint_in >>= 1) { + if (daint_in & 1) + dwc2_handle_epint(dwc2, ep, 1); + } + } + + /* check both FIFOs */ + if (gintsts & GINTSTS_NPTXFEMP) { + dwc2_dbg(dwc2, "NPTxFEmp\n"); + + /* + * Disable the interrupt to stop it happening again + * unless one of these endpoint routines decides that + * it needs re-enabling + */ +#if 0 + dwc2_hsotg_disable_gsint(dwc2, GINTSTS_NPTXFEMP); + dwc2_hsotg_irq_fifoempty(dwc2, false); +#endif + } + + if (gintsts & GINTSTS_PTXFEMP) { + dwc2_dbg(dwc2, "PTxFEmp\n"); + + /* See note in GINTSTS_NPTxFEmp */ +#if 0 + dwc2_hsotg_disable_gsint(dwc2, GINTSTS_PTXFEMP); + dwc2_hsotg_irq_fifoempty(dwc2, true); +#endif + } + + if (gintsts & GINTSTS_RXFLVL) { + /* + * note, since GINTSTS_RxFLvl doubles as FIFO-not-empty, + * we need to retry dwc2_hsotg_handle_rx if this is still + * set. + */ + dwc2_err(dwc2, "RXFLVL\n"); +#if 0 + dwc2_handle_rx(dwc2); +#endif + } + + if (gintsts & GINTSTS_ERLYSUSP) { + dwc2_dbg(dwc2, "GINTSTS_ErlySusp\n"); + dwc2_writel(dwc2, GINTSTS_ERLYSUSP, GINTSTS); + } + if (gintsts & GINTSTS_USBSUSP) { + dwc2_dbg(dwc2, "USBSusp\n"); + dwc2_writel(dwc2, GINTSTS_USBSUSP, GINTSTS); + } + + /* + * these next two seem to crop-up occasionally causing the core + * to shutdown the USB transfer, so try clearing them and logging + * the occurrence. + */ + + if (gintsts & GINTSTS_GOUTNAKEFF) { + u8 idx; + u32 epctrl; + u32 gintmsk; + u32 daintmsk; + struct dwc2_ep *hs_ep; + + daintmsk = dwc2_readl(dwc2, DAINTMSK); + daintmsk >>= DAINT_OUTEP_SHIFT; + /* Mask this interrupt */ + gintmsk = dwc2_readl(dwc2, GINTMSK); + gintmsk &= ~GINTSTS_GOUTNAKEFF; + dwc2_writel(dwc2, gintmsk, GINTMSK); + + dwc2_dbg(dwc2, "GOUTNakEff triggered\n"); + for (idx = 1; idx < dwc2->num_eps; idx++) { + hs_ep = dwc2->eps_out[idx]; + /* Proceed only unmasked ISOC EPs */ + if ((BIT(idx) & ~daintmsk) || !hs_ep->isochronous) + continue; + + epctrl = dwc2_readl(dwc2, DOEPCTL(idx)); + + if (epctrl & DXEPCTL_EPENA) { + epctrl |= DXEPCTL_SNAK; + epctrl |= DXEPCTL_EPDIS; + dwc2_writel(dwc2, epctrl, DOEPCTL(idx)); + } + } + + /* This interrupt bit is cleared in DXEPINT_EPDISBLD handler */ + } + + if (gintsts & GINTSTS_GINNAKEFF) { + dwc2_info(dwc2, "GINNakEff triggered\n"); + dwc2_set_bit(dwc2, DCTL, DCTL_CGNPINNAK); + } +#if 0 + if (gintsts & GINTSTS_INCOMPL_SOIN) + dwc2_handle_incomplete_isoc_in(dwc2); + + if (gintsts & GINTSTS_INCOMPL_SOOUT) + dwc2_handle_incomplete_isoc_out(dwc2); +#endif + + /* + * if we've had fifo events, we should try and go around the + * loop again to see if there's any point in returning yet. + */ + if (gintsts & IRQ_RETRY_MASK && --retry_count > 0) + goto irq_retry; + + spin_unlock(&dwc2->lock); +} + +/** + * dwc2_dwc2_udc_start - prepare the udc for work + * @gadget: The usb gadget state + * @driver: The usb gadget driver + * + * Perform initialization to prepare udc device and driver + * to work. + */ +static int dwc2_gadget_udc_start(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct dwc2 *dwc2 = to_dwc2(gadget); + + if (!driver) { + dwc2_err(dwc2, "%s: no driver\n", __func__); + return -EINVAL; + } + + if (driver->max_speed < USB_SPEED_FULL) { + dwc2_err(dwc2, "%s: bad speed\n", __func__); + return -EINVAL; + } + + dwc2->driver = driver; + dwc2->gadget.speed = USB_SPEED_UNKNOWN; + + dwc2_core_gadget_init(dwc2, false); + dwc2_gadget_interrupt_init(dwc2); + + dwc2_info(dwc2, "bound driver %s\n", driver->driver.name); + + return 0; +} + +static int dwc2_gadget_udc_stop(struct usb_gadget *gadget, + struct usb_gadget_driver *driver) +{ + struct dwc2 *dwc2 = to_dwc2(gadget); + unsigned long flags = 0; + + dwc2_dbg(dwc2, "%s\n", __func__); + + /* all endpoints should be shutdown */ + spin_lock_irqsave(&dwc2->lock, flags); + + dwc2->driver = NULL; + dwc2->gadget.speed = USB_SPEED_UNKNOWN; + dwc2->enabled = 0; + + spin_unlock_irqrestore(&dwc2->lock, flags); + + return 0; +} + +static const struct usb_gadget_ops dwc2_gadget_ops = { + .get_frame = dwc2_gadget_get_frame, + .set_selfpowered = dwc2_set_selfpowered, + .vbus_session = dwc2_gadget_vbus_session, + .vbus_draw = NULL, + .pullup = dwc2_gadget_pullup, + .udc_start = dwc2_gadget_udc_start, + .udc_stop = dwc2_gadget_udc_stop, + .udc_poll = dwc2_gadget_udc_poll, +}; + +/** + * dwc2_gadget_ep_init - initialise a single endpoint + * @dwc2: The device state. + * @epnum: The endpoint number + * @dir_in: True if direction is in. + * + * Initialise the given endpoint (as part of the probe and device state + * creation) to give to the gadget driver. Setup the endpoint name, any + * direction information and other state that may be required. + */ +static void dwc2_ep_init(struct dwc2 *dwc2, int epnum, bool dir_in) +{ + struct dwc2_ep *ep; + char *dir; + + if (dir_in) + ep = dwc2->eps_in[epnum]; + else + ep = dwc2->eps_out[epnum]; + + if (epnum == 0) + dir = ""; + else if (dir_in) + dir = "in"; + else + dir = "out"; + + ep->dir_in = dir_in; + ep->epnum = epnum; + + snprintf(ep->name, sizeof(ep->name), "ep%d%s", epnum, dir); + + INIT_LIST_HEAD(&ep->queue); + INIT_LIST_HEAD(&ep->ep.ep_list); + + if (epnum) + list_add_tail(&ep->ep.ep_list, &dwc2->gadget.ep_list); + + ep->dwc2 = dwc2; + ep->ep.name = ep->name; + + if (dwc2->params.speed == DWC2_SPEED_PARAM_LOW) + usb_ep_set_maxpacket_limit(&ep->ep, 8); + else if (epnum == 0) + usb_ep_set_maxpacket_limit(&ep->ep, D0EPCTL_MPS_LIMIT); + else + usb_ep_set_maxpacket_limit(&ep->ep, 1024); + + ep->ep.ops = &dwc2_ep_ops; +} + +static int dwc2_eps_alloc(struct dwc2 *dwc2) +{ + struct dwc2_ep *ep; + u32 cfg; + u32 ep_type; + u32 i; + + /* Number of Device Endpoints */ + dwc2->num_eps = 1 + dwc2->hw_params.num_dev_ep; + + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + /* Same endpoint is used in both directions for ep0 */ + dwc2->eps_out[0] = dwc2->eps_in[0] = ep; + + cfg = dwc2->hw_params.dev_ep_dirs; + for (i = 1, cfg >>= 2; i < dwc2->num_eps; i++, cfg >>= 2) { + ep_type = cfg & 3; + /* Direction in or both */ + if (!(ep_type & 2)) { + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + dwc2->eps_in[i] = ep; + } + /* Direction out or both */ + if (!(ep_type & 1)) { + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + dwc2->eps_out[i] = ep; + } + } + + dwc2->dedicated_fifos = dwc2->hw_params.en_multiple_tx_fifo; + + dwc2_info(dwc2, "EPs: %d, %s fifos, 0x%x entries in SPRAM\n", + dwc2->num_eps, + dwc2->dedicated_fifos ? "dedicated" : "shared", + dwc2->hw_params.total_fifo_size); + return 0; +} + +int dwc2_gadget_init(struct dwc2 *dwc2) +{ + u32 dctl; + int epnum; + int ret; + + if (!dwc2->params.dma) { + dwc2_err(dwc2, "no DMA support, required by gadget driver"); + return -ENOTSUPP; + } + + dwc2_core_init(dwc2); + + dwc2->gadget.speed = USB_SPEED_UNKNOWN; + if (dwc2->params.speed == DWC2_SPEED_PARAM_HIGH) + dwc2->gadget.max_speed = USB_SPEED_HIGH; + else + dwc2->gadget.max_speed = USB_SPEED_FULL; + + dwc2->gadget.ops = &dwc2_gadget_ops; + dwc2->gadget.name = "DWC2 gadget"; + + dwc2->gadget.is_otg = (dwc2->dr_mode == USB_DR_MODE_OTG) ? 1 : 0; + + ret = dwc2_eps_alloc(dwc2); + if (ret) { + dwc2_err(dwc2, "Endpoints allocation failed: %d\n", ret); + return ret; + } + + dwc2->ctrl_buff = dma_alloc(DWC2_CTRL_BUFF_SIZE); + if (!dwc2->ctrl_buff) + return -ENOMEM; + + dwc2->ep0_buff = dma_alloc(DWC2_CTRL_BUFF_SIZE); + if (!dwc2->ep0_buff) + return -ENOMEM; + + if (dwc2->num_eps == 0) { + dwc2_err(dwc2, "wrong number of EPs (zero)\n"); + return -EINVAL; + } + + /* setup endpoint information */ + INIT_LIST_HEAD(&dwc2->gadget.ep_list); + dwc2->gadget.ep0 = &dwc2->eps_out[0]->ep; + + /* allocate EP0 request */ + dwc2->ctrl_req = dwc2_ep_alloc_req(&dwc2->eps_out[0]->ep); + if (!dwc2->ctrl_req) { + dwc2_err(dwc2, "failed to allocate ctrl req\n"); + return -ENOMEM; + } + + /* initialise the endpoints now the core has been initialised */ + for (epnum = 0; epnum < dwc2->num_eps; epnum++) { + if (dwc2->eps_in[epnum]) + dwc2_ep_init(dwc2, epnum, 1); + if (dwc2->eps_out[epnum]) + dwc2_ep_init(dwc2, epnum, 0); + } + + /* Be in disconnected state until gadget is registered */ + dctl = dwc2_readl(dwc2, DCTL); + dwc2_writel(dwc2, dctl | DCTL_SFTDISCON, DCTL); + + ret = usb_add_gadget_udc(dwc2->dev, &dwc2->gadget); + if (ret) { + dwc2_ep_free_req(&dwc2->eps_out[0]->ep, dwc2->ctrl_req); + return ret; + } + + return 0; +} diff --git a/drivers/usb/dwc2/regs.h b/drivers/usb/dwc2/regs.h index e842c2c2e..06fc8da82 100644 --- a/drivers/usb/dwc2/regs.h +++ b/drivers/usb/dwc2/regs.h @@ -502,6 +502,7 @@ #define D0EPCTL_MPS_32 1 #define D0EPCTL_MPS_16 2 #define D0EPCTL_MPS_8 3 +#define D0EPCTL_MPS_LIMIT 64 #define DXEPCTL_EPENA BIT(31) #define DXEPCTL_EPDIS BIT(30) -- 2.17.1 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox