mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Jules Maselbas <jmaselbas@kalray.eu>
To: Barebox List <barebox@lists.infradead.org>
Cc: Jules Maselbas <jmaselbas@kalray.eu>
Subject: [PATCH v3 08/14] usb: dwc2: host: Fix toggle reset
Date: Tue, 21 Jul 2020 14:05:54 +0200	[thread overview]
Message-ID: <20200721120600.15114-9-jmaselbas@kalray.eu> (raw)
In-Reply-To: <20200721120600.15114-1-jmaselbas@kalray.eu>

From USB 2.0 specification, section 9.4.5:
  ClearFeature(ENDPOINT_HALT) request always results in
  the data toggle being reinitialized to DATA0.

The hacky solution for now is to reset the toggle bit to DATA0 when
the host controller send a ClearFeature request on an endpoint.

Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
---
 drivers/usb/dwc2/host.c | 19 +++++++++++++++++++
 1 file changed, 19 insertions(+)

diff --git a/drivers/usb/dwc2/host.c b/drivers/usb/dwc2/host.c
index 28759a801..98f75744f 100644
--- a/drivers/usb/dwc2/host.c
+++ b/drivers/usb/dwc2/host.c
@@ -109,6 +109,14 @@ static void dwc2_hc_init(struct dwc2 *dwc2, uint8_t hc,
 	dwc2_writel(dwc2, 0, HCSPLT(hc));
 }
 
+static void dwc2_endpoint_reset(struct dwc2 *dwc2, int in, int devnum, int ep)
+{
+	if (in)
+		dwc2->in_data_toggle[devnum][ep] = TSIZ_SC_MC_PID_DATA0;
+	else
+		dwc2->out_data_toggle[devnum][ep] = TSIZ_SC_MC_PID_DATA0;
+}
+
 static int wait_for_chhltd(struct dwc2 *dwc2, u8 hc, uint32_t *sub, u8 *tgl)
 {
 	int ret;
@@ -373,7 +381,18 @@ static int dwc2_submit_control_msg(struct usb_device *udev,
 	if (ret)
 		return ret;
 
+	if (setup->requesttype == USB_RECIP_ENDPOINT
+	    && setup->request == USB_REQ_CLEAR_FEATURE) {
+		/* From USB 2.0, section 9.4.5:
+		 * ClearFeature(ENDPOINT_HALT) request always results
+		 * in the data toggle being reinitialized to DATA0.
+		 */
+		int ep = le16_to_cpu(setup->index) & 0xf;
+		dwc2_endpoint_reset(dwc2, usb_pipein(pipe), devnum, ep);
+	}
+
 	udev->act_len = act_len;
+	udev->status = 0;
 
 	return 0;
 }
-- 
2.17.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-07-21 12:06 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-21 12:05 [PATCH v3 00/14] usb: dwc2: Add host and gadget driver Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 01/14] Revert "usb: Add dwc2 host driver" Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 02/14] usb: dwc2: Add host controller driver Jules Maselbas
2020-07-22  6:36   ` Ahmad Fatoum
2020-07-22  9:12     ` Jules Maselbas
2020-07-22  9:18       ` Ahmad Fatoum
2020-07-22  9:21         ` Jules Maselbas
2020-08-10 20:26   ` Sascha Hauer
2020-07-21 12:05 ` [PATCH v3 03/14] usb: dwc2: host: Read dr_mode from device tree Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 04/14] usb: dwc2: Rework roothub interface Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 05/14] usb: dwc2: Rework timeout Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 06/14] usb: dwc2: host: Handle dma mapping errors Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 07/14] usb: dwc2: host: Dynamic fifo size support from Linux Jules Maselbas
2020-07-21 12:05 ` Jules Maselbas [this message]
2020-07-21 12:05 ` [PATCH v3 09/14] usb: dwc2: host: Rewrite dwc2_hc_init Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 10/14] usb: dwc2: Add function to flush tx fifo Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 11/14] usb: dwc2: Add structure for gadget driver Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 12/14] usb: dwc2: Add " Jules Maselbas
2020-07-21 12:05 ` [PATCH v3 13/14] usb: dwc2: Use register_otg_device Jules Maselbas
2020-07-21 12:06 ` [PATCH v3 14/14] usb: dwc2: Add ulpi phy function Jules Maselbas
2020-08-10 20:34   ` Sascha Hauer
2020-08-11  9:31     ` Jules Maselbas
2020-08-10 20:23 ` [PATCH v3 00/14] usb: dwc2: Add host and gadget driver Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200721120600.15114-9-jmaselbas@kalray.eu \
    --to=jmaselbas@kalray.eu \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox