mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org, david@protonic.nl
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v1 00/11] prepare Protonic board code for mainline
Date: Thu, 23 Jul 2020 12:33:15 +0200	[thread overview]
Message-ID: <20200723103326.23226-1-o.rempel@pengutronix.de> (raw)

This patch series is a preparation and actual Protonic board code.
Following changes was made in the main code:
- register DT root node as device to make it possible to loade board
  code as usual driver
- provide helpers to read ethernet mac from nvmem cell register in a
  devicetree.
- provide barebox-serial driver which should be a nvmem cell consumer and
  serial-number DT property provider.
- provide gpio helper to read gpio based board revision.

Oleksij Rempel (11):
  ARM: dts: imx6q-prti6q: fix PHY register
  of: base: register DT root as device
  ARM: embest-riotboard: port board file to the driver model
  net: port nvmem_get_mac_address() from linux kernel
  of: of_net: sync of_get_mac_address() with latest kernel version
  net: fec_imx: use of_get_mac_address() to get mac address out of DT
  of: of_device_get_match_compatible() helper
  gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  ARM: protonic-imx6: port protonic specific board code
  of: add barebox-serial driver
  ARM: dts: imx6q-prti6q: add barebox.serial node

 arch/arm/boards/embest-riotboard/board.c |  18 +-
 arch/arm/boards/protonic-imx6/Makefile   |   1 +
 arch/arm/boards/protonic-imx6/board.c    | 598 +++++++++++++++++++++++
 arch/arm/dts/imx6q-prti6q.dts            |   9 +-
 drivers/gpio/gpiolib.c                   |  28 ++
 drivers/net/fec_imx.c                    |   9 +
 drivers/of/Makefile                      |   2 +-
 drivers/of/barebox_serial.c              | 111 +++++
 drivers/of/base.c                        |   5 +
 drivers/of/device.c                      |  12 +
 drivers/of/of_net.c                      |  63 ++-
 include/gpio.h                           |   5 +
 include/net.h                            |   4 +
 include/of_device.h                      |   6 +
 net/eth.c                                |  38 ++
 15 files changed, 889 insertions(+), 20 deletions(-)
 create mode 100644 arch/arm/boards/protonic-imx6/board.c
 create mode 100644 drivers/of/barebox_serial.c

-- 
2.27.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

             reply	other threads:[~2020-07-23 10:33 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-07-23 10:33 Oleksij Rempel [this message]
2020-07-23 10:33 ` [PATCH v1 01/11] ARM: dts: imx6q-prti6q: fix PHY register Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 02/11] of: base: register DT root as device Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 03/11] ARM: embest-riotboard: port board file to the driver model Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 04/11] net: port nvmem_get_mac_address() from linux kernel Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 05/11] of: of_net: sync of_get_mac_address() with latest kernel version Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 06/11] net: fec_imx: use of_get_mac_address() to get mac address out of DT Oleksij Rempel
2020-08-03 20:13   ` Sascha Hauer
2020-08-04  5:29     ` Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 07/11] of: of_device_get_match_compatible() helper Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 08/11] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
2020-08-03 20:22   ` Sascha Hauer
2020-08-04  5:22     ` Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 09/11] ARM: protonic-imx6: port protonic specific board code Oleksij Rempel
2020-08-03 20:49   ` Sascha Hauer
2020-08-04  6:22     ` Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 10/11] of: add barebox-serial driver Oleksij Rempel
2020-07-23 10:33 ` [PATCH v1 11/11] ARM: dts: imx6q-prti6q: add barebox.serial node Oleksij Rempel
2020-08-03 21:12   ` Sascha Hauer
2020-08-04  5:48     ` Oleksij Rempel
2020-08-11  8:27       ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200723103326.23226-1-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=david@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox