mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK
@ 2020-07-24 11:12 Lucas Stach
  2020-07-24 11:12 ` [PATCH 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM Lucas Stach
                   ` (2 more replies)
  0 siblings, 3 replies; 5+ messages in thread
From: Lucas Stach @ 2020-07-24 11:12 UTC (permalink / raw)
  To: barebox

Without this select the necessary DDR PHY firmware files will be missing
when only building for the i.MX8MM-EVK board.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
---
 arch/arm/mach-imx/Kconfig | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index 6dd5cb2aca15..7617a5ccd4b3 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -515,6 +515,7 @@ config MACH_NXP_IMX6ULL_EVK
 config MACH_NXP_IMX8MM_EVK
 	bool "NXP i.MX8MM EVK Board"
 	select ARCH_IMX8MM
+	select FIRMWARE_IMX_LPDDR4_PMU_TRAIN
 	select FIRMWARE_IMX8MM_ATF
 	select ARM_SMCCC
 	select MCI_IMX_ESDHC_PBL
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 5+ messages in thread

end of thread, other threads:[~2020-08-03 19:36 UTC | newest]

Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-24 11:12 [PATCH 1/4] ARM: imx8mm: select FIRMWARE_IMX_LPDDR4_PMU_TRAIN from IMX8MM_EVK Lucas Stach
2020-07-24 11:12 ` [PATCH 2/4] ARM: imx8m: make debug UART selection available on i.MX8MM Lucas Stach
2020-08-03 19:36   ` Sascha Hauer
2020-07-24 11:12 ` [PATCH 3/4] ARM: nxp-imx8mm-evk: always set up UART Lucas Stach
2020-07-24 11:12 ` [PATCH 4/4] nvmem: ocotp: add support for i.MX8MM Lucas Stach

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox