[PATCH v2 00/13] prepare Protonic board code for mainline

[Oleksij Rempel <o.rempel@pengutronix.de>]

changes v2:
- add power init support for KvG boards
- spell fixes
- do not print error on probe exit
- add of_console_get_by_alias() helper
- free requested gpio array
- exit fec init only in case of PROBE_DEFERED

This patch series is a preparation and actual Protonic board code.
Following changes was made in the main code:
- register DT root node as device to make it possible to loade board
  code as usual driver
- provide helpers to read ethernet mac from nvmem cell register in a
  devicetree.
- provide barebox-serial driver which should be a nvmem cell consumer
  and
  serial-number DT property provider.
- provide gpio helper to read gpio based board revision.

Oleksij Rempel (13):
  ARM: dts: imx6q-prti6q: fix PHY register
  ARM: dts: imx6: vicut1: fix network support
  of: base: register DT root as device
  ARM: embest-riotboard: port board file to the driver model
  net: port nvmem_get_mac_address() from linux kernel
  of: of_net: sync of_get_mac_address() with latest kernel version
  net: fec_imx: use of_get_mac_address() to get mac address out of DT
  of: of_device_get_match_compatible() helper
  gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  common: console_common: add of_console_get_by_alias() helper
  ARM: protonic-imx6: port Protonic specific board code
  of: add barebox-serial driver
  ARM: dts: imx6q-prti6q: add barebox,serial-number node

 arch/arm/boards/embest-riotboard/board.c |  18 +-
 arch/arm/boards/protonic-imx6/Makefile   |   1 +
 arch/arm/boards/protonic-imx6/board.c    | 860 +++++++++++++++++++++++
 arch/arm/dts/imx6q-prti6q.dts            |   4 +-
 arch/arm/dts/imx6q-vicut1.dts            |  18 +-
 arch/arm/dts/imx6qdl-prti6q.dtsi         |   6 +
 common/console_common.c                  |  18 +
 drivers/gpio/gpiolib.c                   |  31 +
 drivers/net/fec_imx.c                    |  14 +
 drivers/of/Makefile                      |   2 +-
 drivers/of/barebox_serial.c              | 113 +++
 drivers/of/base.c                        |   5 +
 drivers/of/device.c                      |  12 +
 drivers/of/of_net.c                      |  63 +-
 include/console.h                        |   1 +
 include/gpio.h                           |   5 +
 include/net.h                            |   4 +
 include/of_device.h                      |   6 +
 net/eth.c                                |  38 +
 19 files changed, 1197 insertions(+), 22 deletions(-)
 create mode 100644 arch/arm/boards/protonic-imx6/board.c
 create mode 100644 drivers/of/barebox_serial.c

-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox