From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k5SDG-0005Ft-8k for barebox@lists.infradead.org; Tue, 11 Aug 2020 11:13:03 +0000 Date: Tue, 11 Aug 2020 13:12:56 +0200 From: Sascha Hauer Message-ID: <20200811111256.GL9475@pengutronix.de> References: <20200805101628.4698-1-o.rempel@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline In-Reply-To: <20200805101628.4698-1-o.rempel@pengutronix.de> List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: Re: [PATCH v2 00/13] prepare Protonic board code for mainline To: Oleksij Rempel Cc: barebox@lists.infradead.org, david@protonic.nl On Wed, Aug 05, 2020 at 12:16:15PM +0200, Oleksij Rempel wrote: > changes v2: > - add power init support for KvG boards > - spell fixes > - do not print error on probe exit > - add of_console_get_by_alias() helper > - free requested gpio array > - exit fec init only in case of PROBE_DEFERED > > This patch series is a preparation and actual Protonic board code. > Following changes was made in the main code: > - register DT root node as device to make it possible to loade board > code as usual driver > - provide helpers to read ethernet mac from nvmem cell register in a > devicetree. > - provide barebox-serial driver which should be a nvmem cell consumer > and > serial-number DT property provider. > - provide gpio helper to read gpio based board revision. > > Oleksij Rempel (13): > ARM: dts: imx6q-prti6q: fix PHY register > ARM: dts: imx6: vicut1: fix network support > of: base: register DT root as device > ARM: embest-riotboard: port board file to the driver model > net: port nvmem_get_mac_address() from linux kernel > of: of_net: sync of_get_mac_address() with latest kernel version > net: fec_imx: use of_get_mac_address() to get mac address out of DT > of: of_device_get_match_compatible() helper > gpiolib: add gpio_array_to_id helper to get ID out of GPIO array > common: console_common: add of_console_get_by_alias() helper > ARM: protonic-imx6: port Protonic specific board code > of: add barebox-serial driver > ARM: dts: imx6q-prti6q: add barebox,serial-number node Applied 1-4 for now. Sascha -- Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox