From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by casper.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k6ClN-00071y-BG for barebox@lists.infradead.org; Thu, 13 Aug 2020 12:55:45 +0000 From: Oleksij Rempel Date: Thu, 13 Aug 2020 14:55:08 +0200 Message-Id: <20200813125514.13574-1-o.rempel@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v3 0/6] prepare Protonic board code for mainline To: barebox@lists.infradead.org, david@protonic.nl Cc: Oleksij Rempel changes v3: - remove barebox-serial driver and use read the rfid directy from board code (as was done in initial implementation) - use initcall instead of registering driver in the board code - add delayed USB scan - add rampoops node - add partition tables changes v2: - add power init support for KvG boards - spell fixes - do not print error on probe exit - add of_console_get_by_alias() helper - free requested gpio array - exit fec init only in case of PROBE_DEFERED This patch series is a preparation and actual Protonic board code. Following changes was made in the main code: - register DT root node as device to make it possible to loade board code as usual driver - provide helpers to read ethernet mac from nvmem cell register in a devicetree. - provide barebox-serial driver which should be a nvmem cell consumer and serial-number DT property provider. - provide gpio helper to read gpio based board revision. Oleksij Rempel (6): gpiolib: add gpio_array_to_id helper to get ID out of GPIO array common: console_common: add of_console_get_by_alias() helper of: of_device_get_match_compatible() helper ARM: protonic-imx6: port Protonic specific board code ARM: dts: unify barebox and barebox,env partitions for all Protonic boards ARM: dts: imx6q-prti6q: add pstore/ramoops node arch/arm/boards/protonic-imx6/Makefile | 1 + arch/arm/boards/protonic-imx6/board.c | 1002 ++++++++++++++++++++++++ arch/arm/dts/imx6dl-plym2m.dts | 25 + arch/arm/dts/imx6dl-prtrvt.dts | 1 + arch/arm/dts/imx6q-prti6q.dts | 24 +- arch/arm/dts/imx6qdl-prti6q-nor.dtsi | 10 + arch/arm/dts/imx6qdl-prti6q.dtsi | 31 + arch/arm/dts/imx6qdl-vicut1.dtsi | 26 + common/console_common.c | 18 + drivers/gpio/gpiolib.c | 31 + drivers/of/device.c | 12 + include/console.h | 1 + include/gpio.h | 5 + include/of_device.h | 6 + 14 files changed, 1170 insertions(+), 23 deletions(-) create mode 100644 arch/arm/boards/protonic-imx6/board.c create mode 100644 arch/arm/dts/imx6qdl-prti6q-nor.dtsi -- 2.28.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox