mail archive of the barebox mailing list
 help / color / mirror / Atom feed
* [PATCH v3 0/6] prepare Protonic board code for mainline
@ 2020-08-13 12:55 Oleksij Rempel
  2020-08-13 12:55 ` [PATCH v3 1/6] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
                   ` (5 more replies)
  0 siblings, 6 replies; 9+ messages in thread
From: Oleksij Rempel @ 2020-08-13 12:55 UTC (permalink / raw)
  To: barebox, david; +Cc: Oleksij Rempel

changes v3:
- remove barebox-serial driver and use read the rfid directy from board
  code (as was done in initial implementation)
- use initcall instead of registering driver in the board code
- add delayed USB scan
- add rampoops node
- add partition tables 

changes v2:
- add power init support for KvG boards
- spell fixes
- do not print error on probe exit
- add of_console_get_by_alias() helper
- free requested gpio array
- exit fec init only in case of PROBE_DEFERED

This patch series is a preparation and actual Protonic board code.
Following changes was made in the main code:
- register DT root node as device to make it possible to loade board
  code as usual driver
- provide helpers to read ethernet mac from nvmem cell register in a
  devicetree.
- provide barebox-serial driver which should be a nvmem cell consumer
  and
  serial-number DT property provider.
- provide gpio helper to read gpio based board revision.

Oleksij Rempel (6):
  gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
  common: console_common: add of_console_get_by_alias() helper
  of: of_device_get_match_compatible() helper
  ARM: protonic-imx6: port Protonic specific board code
  ARM: dts: unify barebox and barebox,env partitions for all Protonic
    boards
  ARM: dts: imx6q-prti6q: add pstore/ramoops node

 arch/arm/boards/protonic-imx6/Makefile |    1 +
 arch/arm/boards/protonic-imx6/board.c  | 1002 ++++++++++++++++++++++++
 arch/arm/dts/imx6dl-plym2m.dts         |   25 +
 arch/arm/dts/imx6dl-prtrvt.dts         |    1 +
 arch/arm/dts/imx6q-prti6q.dts          |   24 +-
 arch/arm/dts/imx6qdl-prti6q-nor.dtsi   |   10 +
 arch/arm/dts/imx6qdl-prti6q.dtsi       |   31 +
 arch/arm/dts/imx6qdl-vicut1.dtsi       |   26 +
 common/console_common.c                |   18 +
 drivers/gpio/gpiolib.c                 |   31 +
 drivers/of/device.c                    |   12 +
 include/console.h                      |    1 +
 include/gpio.h                         |    5 +
 include/of_device.h                    |    6 +
 14 files changed, 1170 insertions(+), 23 deletions(-)
 create mode 100644 arch/arm/boards/protonic-imx6/board.c
 create mode 100644 arch/arm/dts/imx6qdl-prti6q-nor.dtsi

-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2020-08-17  6:54 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-08-13 12:55 [PATCH v3 0/6] prepare Protonic board code for mainline Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 1/6] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 2/6] common: console_common: add of_console_get_by_alias() helper Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 3/6] of: of_device_get_match_compatible() helper Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 4/6] ARM: protonic-imx6: port Protonic specific board code Oleksij Rempel
2020-08-13 14:07   ` David Jander
2020-08-17  6:54     ` Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 5/6] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards Oleksij Rempel
2020-08-13 12:55 ` [PATCH v3 6/6] ARM: dts: imx6q-prti6q: add pstore/ramoops node Oleksij Rempel

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox