mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org, david@protonic.nl
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v5 10/12] ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS
Date: Thu, 20 Aug 2020 09:34:52 +0200	[thread overview]
Message-ID: <20200820073454.17500-11-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20200820073454.17500-1-o.rempel@pengutronix.de>

Sync it with Protonic PLYBAS board to have same, reproducible behavior
on all boards.

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/dts/imx6dl-lanmcu.dts | 6 ++----
 1 file changed, 2 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts
index 65f6cbf395..42f8c91ece 100644
--- a/arch/arm/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/dts/imx6dl-lanmcu.dts
@@ -201,7 +201,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D26__UART2_RX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D27__UART2_TX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D28__GPIO3_IO28		0x130b1
+				MX6QDL_PAD_EIM_D28__UART2_CTS_B		0x130b1
 			>;
 		};
 
@@ -209,7 +209,7 @@
 			fsl,pins = <
 				MX6QDL_PAD_EIM_D24__UART3_TX_DATA	0x1b0b1
 				MX6QDL_PAD_EIM_D25__UART3_RX_DATA	0x1b0b1
-				MX6QDL_PAD_EIM_D30__GPIO3_IO30		0x130b1
+				MX6QDL_PAD_EIM_D30__UART3_CTS_B		0x130b1
 			>;
 		};
 
@@ -320,7 +320,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart2>;
 	linux,rs485-enabled-at-boot-time;
-	rts-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
@@ -328,7 +327,6 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_uart3>;
 	linux,rs485-enabled-at-boot-time;
-	rts-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>;
 	status = "okay";
 };
 
-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-08-20  7:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-20  7:34 [PATCH v5 00/12] prepare Protonic board code for mainline Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 01/12] of: base: register DT root as device Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 02/12] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 03/12] common: console_common: add of_console_get_by_alias() helper Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 04/12] of: of_device_get_match_compatible() helper Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 05/12] ARM: protonic-imx6: port Protonic specific board code Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 06/12] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 07/12] ARM: dts: imx6q-prti6q: add pstore/ramoops node Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 08/12] ARM: dts: protonic: lanmcu: add eMMC partition table Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 09/12] ARM: dts: protonic: add fixed clock for the FEC node Oleksij Rempel
2020-08-20  7:34 ` Oleksij Rempel [this message]
2020-08-20  7:34 ` [PATCH v5 11/12] ARM: dts: protonic: properly define PHY nodes on lanmcu and plym2m boards Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 12/12] ARM: dts: protonic: lanmcu: add uart-has-rtscts to enable rs485 functionality Oleksij Rempel
2020-08-24  6:51 ` [PATCH v5 00/12] prepare Protonic board code for mainline Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200820073454.17500-11-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=david@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox