From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([85.220.165.71]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1k8f69-0004mp-Q2 for barebox@lists.infradead.org; Thu, 20 Aug 2020 07:35:00 +0000 From: Oleksij Rempel Date: Thu, 20 Aug 2020 09:34:52 +0200 Message-Id: <20200820073454.17500-11-o.rempel@pengutronix.de> In-Reply-To: <20200820073454.17500-1-o.rempel@pengutronix.de> References: <20200820073454.17500-1-o.rempel@pengutronix.de> MIME-Version: 1.0 List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: [PATCH v5 10/12] ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS To: barebox@lists.infradead.org, david@protonic.nl Cc: Oleksij Rempel Sync it with Protonic PLYBAS board to have same, reproducible behavior on all boards. Signed-off-by: Oleksij Rempel --- arch/arm/dts/imx6dl-lanmcu.dts | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-) diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts index 65f6cbf395..42f8c91ece 100644 --- a/arch/arm/dts/imx6dl-lanmcu.dts +++ b/arch/arm/dts/imx6dl-lanmcu.dts @@ -201,7 +201,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D26__UART2_RX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D27__UART2_TX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 + MX6QDL_PAD_EIM_D28__UART2_CTS_B 0x130b1 >; }; @@ -209,7 +209,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 - MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x130b1 + MX6QDL_PAD_EIM_D30__UART3_CTS_B 0x130b1 >; }; @@ -320,7 +320,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart2>; linux,rs485-enabled-at-boot-time; - rts-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -328,7 +327,6 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_uart3>; linux,rs485-enabled-at-boot-time; - rts-gpios = <&gpio3 30 GPIO_ACTIVE_HIGH>; status = "okay"; }; -- 2.28.0 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox