mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Oleksij Rempel <o.rempel@pengutronix.de>
To: barebox@lists.infradead.org, david@protonic.nl
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Subject: [PATCH v5 11/12] ARM: dts: protonic: properly define PHY nodes on lanmcu and plym2m boards
Date: Thu, 20 Aug 2020 09:34:53 +0200	[thread overview]
Message-ID: <20200820073454.17500-12-o.rempel@pengutronix.de> (raw)
In-Reply-To: <20200820073454.17500-1-o.rempel@pengutronix.de>

Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de>
---
 arch/arm/dts/imx6dl-lanmcu.dts | 15 ++++++++++++++-
 arch/arm/dts/imx6dl-plym2m.dts | 15 ++++++++++++++-
 2 files changed, 28 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/imx6dl-lanmcu.dts b/arch/arm/dts/imx6dl-lanmcu.dts
index 42f8c91ece..67139930f9 100644
--- a/arch/arm/dts/imx6dl-lanmcu.dts
+++ b/arch/arm/dts/imx6dl-lanmcu.dts
@@ -308,12 +308,25 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clk50m_phy>;
 	clock-names = "ipg", "ahb", "ptp";
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
 };
 
 &uart2 {
diff --git a/arch/arm/dts/imx6dl-plym2m.dts b/arch/arm/dts/imx6dl-plym2m.dts
index d04137e282..e944a14dce 100644
--- a/arch/arm/dts/imx6dl-plym2m.dts
+++ b/arch/arm/dts/imx6dl-plym2m.dts
@@ -54,12 +54,25 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_enet>;
 	phy-mode = "rmii";
-	phy-reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
 	clocks = <&clks IMX6QDL_CLK_ENET>,
 		 <&clks IMX6QDL_CLK_ENET>,
 		 <&clk50m_phy>;
 	clock-names = "ipg", "ahb", "ptp";
 	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		/* Microchip KSZ8081RNA PHY */
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
+			interrupts-extended = <&gpio5 23 IRQ_TYPE_LEVEL_LOW>;
+			reset-gpios = <&gpio5 22 GPIO_ACTIVE_LOW>;
+			reset-assert-us = <10000>;
+			reset-deassert-us = <300>;
+		};
+	};
 };
 
 &iomuxc {
-- 
2.28.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  parent reply	other threads:[~2020-08-20  7:35 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-20  7:34 [PATCH v5 00/12] prepare Protonic board code for mainline Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 01/12] of: base: register DT root as device Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 02/12] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 03/12] common: console_common: add of_console_get_by_alias() helper Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 04/12] of: of_device_get_match_compatible() helper Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 05/12] ARM: protonic-imx6: port Protonic specific board code Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 06/12] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 07/12] ARM: dts: imx6q-prti6q: add pstore/ramoops node Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 08/12] ARM: dts: protonic: lanmcu: add eMMC partition table Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 09/12] ARM: dts: protonic: add fixed clock for the FEC node Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 10/12] ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS Oleksij Rempel
2020-08-20  7:34 ` Oleksij Rempel [this message]
2020-08-20  7:34 ` [PATCH v5 12/12] ARM: dts: protonic: lanmcu: add uart-has-rtscts to enable rs485 functionality Oleksij Rempel
2020-08-24  6:51 ` [PATCH v5 00/12] prepare Protonic board code for mainline Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200820073454.17500-12-o.rempel@pengutronix.de \
    --to=o.rempel@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=david@protonic.nl \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox