mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Sascha Hauer <s.hauer@pengutronix.de>
To: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: barebox@lists.infradead.org, david@protonic.nl
Subject: Re: [PATCH v5 00/12] prepare Protonic board code for mainline
Date: Mon, 24 Aug 2020 08:51:49 +0200	[thread overview]
Message-ID: <20200824065149.GG13023@pengutronix.de> (raw)
In-Reply-To: <20200820073454.17500-1-o.rempel@pengutronix.de>

On Thu, Aug 20, 2020 at 09:34:42AM +0200, Oleksij Rempel wrote:
> changes v5:
> - board: apply requested changes
> - add PHY and rs458 devicetree fixes for lanmcu and plym2m
> 
> changes v4:
> - follow suggestion provided by Ahmad and open-code the root node
>   registration and call it machine.of
> - board: rename crc and cs
> - board: ignore most of init related errors. Even if one part will fail,
>   we should be able to get as mach as possible.
> 
> changes v3:
> - remove barebox-serial driver and use read the rfid directy from board
>   code (as was done in initial implementation)
> - use initcall instead of registering driver in the board code
> - add delayed USB scan
> - add rampoops node
> - add partition tables 
> 
> changes v2:
> - add power init support for KvG boards
> - spell fixes
> - do not print error on probe exit
> - add of_console_get_by_alias() helper
> - free requested gpio array
> - exit fec init only in case of PROBE_DEFERED
> 
> This patch series is a preparation and actual Protonic board code.
> Following changes was made in the main code:
> - register DT root node as device to make it possible to loade board
>   code as usual driver
> - provide helpers to read ethernet mac from nvmem cell register in a
>   devicetree.
> - provide barebox-serial driver which should be a nvmem cell consumer
>   and
>   serial-number DT property provider.
> - provide gpio helper to read gpio based board revision.
> 
> Oleksij Rempel (12):
>   of: base: register DT root as device
>   gpiolib: add gpio_array_to_id helper to get ID out of GPIO array
>   common: console_common: add of_console_get_by_alias() helper
>   of: of_device_get_match_compatible() helper
>   ARM: protonic-imx6: port Protonic specific board code
>   ARM: dts: unify barebox and barebox,env partitions for all Protonic
>     boards
>   ARM: dts: imx6q-prti6q: add pstore/ramoops node
>   ARM: dts: protonic: lanmcu: add eMMC partition table
>   ARM: dts: protonic: add fixed clock for the FEC node
>   ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS
>   ARM: dts: protonic: properly define PHY nodes on lanmcu and plym2m
>     boards
>   ARM: dts: protonic: lanmcu: add uart-has-rtscts to enable rs485
>     functionality

Applied, thanks

Sascha


-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

      parent reply	other threads:[~2020-08-24  6:51 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-08-20  7:34 Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 01/12] of: base: register DT root as device Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 02/12] gpiolib: add gpio_array_to_id helper to get ID out of GPIO array Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 03/12] common: console_common: add of_console_get_by_alias() helper Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 04/12] of: of_device_get_match_compatible() helper Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 05/12] ARM: protonic-imx6: port Protonic specific board code Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 06/12] ARM: dts: unify barebox and barebox, env partitions for all Protonic boards Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 07/12] ARM: dts: imx6q-prti6q: add pstore/ramoops node Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 08/12] ARM: dts: protonic: lanmcu: add eMMC partition table Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 09/12] ARM: dts: protonic: add fixed clock for the FEC node Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 10/12] ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 11/12] ARM: dts: protonic: properly define PHY nodes on lanmcu and plym2m boards Oleksij Rempel
2020-08-20  7:34 ` [PATCH v5 12/12] ARM: dts: protonic: lanmcu: add uart-has-rtscts to enable rs485 functionality Oleksij Rempel
2020-08-24  6:51 ` Sascha Hauer [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200824065149.GG13023@pengutronix.de \
    --to=s.hauer@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=david@protonic.nl \
    --cc=o.rempel@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox