From: Peter Mamonov <pmamonov@gmail.com>
To: Roland Hieber <rhi@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH] commands: import memtester 4.3.0 from Debian GNU/Linux
Date: Fri, 28 Aug 2020 13:28:58 +0300 [thread overview]
Message-ID: <20200828102857.GB26484@chr> (raw)
In-Reply-To: <20200827084503.3fj73n3mdmsf7rhi@pengutronix.de>
On Thu, Aug 27, 2020 at 10:45:03AM +0200, Roland Hieber wrote:
> On Wed, Aug 26, 2020 at 05:26:32PM +0300, Peter Mamonov wrote:
> > Memtester is an utility for testing the memory subsystem for faults. For
> > hardware developers, memtester can be told to test memory starting at a
> > particular physical address.
> >
> > This port is based on the sources from Debian GNU/Linux. Debian package meta
> > data is as follows:
> >
> > Package: memtester
> > Version: 4.3.0-5
> > Homepage: http://pyropus.ca/software/memtester/
> > APT-Sources: http://ftp.ru.debian.org/debian testing/main amd64 Packages
> >
> > Dissected version of this patch can be found at
> > https://github.com/pmamonov/barebox/commits/memtester and consists of two
> > patches:
> >
> > commands: import memtester 4.3.0 sources from Debian GNU/Linux
> > commands: memtester: integrate it into barebox
> >
> > Signed-off-by: Peter Mamonov <pmamonov@gmail.com>
> > ---
> > commands/Kconfig | 8 +
> > commands/Makefile | 1 +
> > commands/memtester/Makefile | 1 +
> > commands/memtester/memtester.c | 316 +++++++++++++++++++
> > commands/memtester/memtester.h | 22 ++
> > commands/memtester/sizes.h | 38 +++
> > commands/memtester/tests.c | 538 +++++++++++++++++++++++++++++++++
> > commands/memtester/tests.h | 37 +++
> > commands/memtester/types.h | 36 +++
> > 9 files changed, 997 insertions(+)
> > create mode 100644 commands/memtester/Makefile
> > create mode 100644 commands/memtester/memtester.c
> > create mode 100644 commands/memtester/memtester.h
> > create mode 100644 commands/memtester/sizes.h
> > create mode 100644 commands/memtester/tests.c
> > create mode 100644 commands/memtester/tests.h
> > create mode 100644 commands/memtester/types.h
> >
> > diff --git a/commands/Kconfig b/commands/Kconfig
> > index 3789f33c3b..34c24f7d25 100644
> > --- a/commands/Kconfig
> > +++ b/commands/Kconfig
> > @@ -1590,6 +1590,14 @@ config CMD_MEMTEST
> > -i ITERATIONS perform number of iterations (default 1, 0 is endless)
> > -b perform only a test on bus lines
> >
> > +config CMD_MEMTESTER
> > + tristate
> > + prompt "memtester"
> > + help
> > + Utility for testing the memory subsystem.
> > +
> > + Homepage: http://pyropus.ca/software/memtester/
> > +
> > config CMD_MM
> > tristate
> > select DEV_MEM
> > diff --git a/commands/Makefile b/commands/Makefile
> > index 01082de44c..191527c84e 100644
> > --- a/commands/Makefile
> > +++ b/commands/Makefile
> > @@ -49,6 +49,7 @@ obj-$(CONFIG_CMD_LOADENV) += loadenv.o
> > obj-$(CONFIG_CMD_NAND) += nand.o
> > obj-$(CONFIG_CMD_NANDTEST) += nandtest.o
> > obj-$(CONFIG_CMD_MEMTEST) += memtest.o
> > +obj-$(CONFIG_CMD_MEMTESTER) += memtester/
> > obj-$(CONFIG_CMD_TRUE) += true.o
> > obj-$(CONFIG_CMD_FALSE) += false.o
> > obj-$(CONFIG_CMD_VERSION) += version.o
> > diff --git a/commands/memtester/Makefile b/commands/memtester/Makefile
> > new file mode 100644
> > index 0000000000..17a2429276
> > --- /dev/null
> > +++ b/commands/memtester/Makefile
> > @@ -0,0 +1 @@
> > +obj-y += tests.o memtester.o
> > diff --git a/commands/memtester/memtester.c b/commands/memtester/memtester.c
> > new file mode 100644
> > index 0000000000..7be6a9c693
> > --- /dev/null
> > +++ b/commands/memtester/memtester.c
> > @@ -0,0 +1,316 @@
> > +/*
> > + * memtester version 4
> > + *
> > + * Very simple but very effective user-space memory tester.
> > + * Originally by Simon Kirby <sim@stormix.com> <sim@neato.org>
> > + * Version 2 by Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Version 3 not publicly released.
> > + * Version 4 rewrite:
> > + * Copyright (C) 2004-2012 Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Licensed under the terms of the GNU General Public License version 2 (only).
> > + * See the file COPYING for details.
> > + *
> > + */
>
> Please add SPDX identifiers to new files, see [1] for more info. In this
> case it should be
>
> /* SPDX-License-Identifier: GPL-2.0-only */
>
> You can then drop the "Licensed under the terms..." line.
>
> [1]: <https://www.kernel.org/doc/html/latest/process/license-rules.html>
>
Ok, will do so in the next version.
Thanks,
Peter
> > +
> > +#define __version__ "4.3.0"
> > +
> > +#include <stdlib.h>
> > +#include <stdio.h>
> > +#include <types.h>
> > +#include <sys/stat.h>
> > +#include <unistd.h>
> > +#include <fcntl.h>
> > +#include <string.h>
> > +#include <errno.h>
> > +#include <getopt.h>
> > +#include <common.h>
> > +#include <command.h>
> > +#include <environment.h>
> > +#include <fs.h>
> > +
> > +#include "types.h"
> > +#include "sizes.h"
> > +#include "tests.h"
> > +
> > +#define EXIT_FAIL_NONSTARTER 0x01
> > +#define EXIT_FAIL_ADDRESSLINES 0x02
> > +#define EXIT_FAIL_OTHERTEST 0x04
> > +
> > +struct test tests[] = {
> > + { "Random Value", test_random_value },
> > + { "Compare XOR", test_xor_comparison },
> > + { "Compare SUB", test_sub_comparison },
> > + { "Compare MUL", test_mul_comparison },
> > + { "Compare DIV",test_div_comparison },
> > + { "Compare OR", test_or_comparison },
> > + { "Compare AND", test_and_comparison },
> > + { "Sequential Increment", test_seqinc_comparison },
> > + { "Solid Bits", test_solidbits_comparison },
> > + { "Block Sequential", test_blockseq_comparison },
> > + { "Checkerboard", test_checkerboard_comparison },
> > + { "Bit Spread", test_bitspread_comparison },
> > + { "Bit Flip", test_bitflip_comparison },
> > + { "Walking Ones", test_walkbits1_comparison },
> > + { "Walking Zeroes", test_walkbits0_comparison },
> > + { "8-bit Writes", test_8bit_wide_random },
> > + { "16-bit Writes", test_16bit_wide_random },
> > + { NULL, NULL }
> > +};
> > +
> > +/* Function declarations */
> > +
> > +/* Global vars - so tests have access to this information */
> > +int use_phys = 0;
> > +off_t physaddrbase = 0;
> > +
> > +static int do_memtester(int argc, char **argv) {
> > + ul loops, loop, i;
> > + size_t wantraw, wantmb, wantbytes, wantbytes_orig, bufsize,
> > + halflen, count;
> > + char *memsuffix, *addrsuffix, *loopsuffix;
> > + void volatile *buf, *aligned;
> > + ulv *bufa, *bufb;
> > + int exit_code = 0, ret;
> > + int memfd = 0, opt, memshift;
> > + size_t maxbytes = -1; /* addressable memory, in bytes */
> > + size_t maxmb = (maxbytes >> 20) + 1; /* addressable memory, in MB */
> > + /* Device to mmap memory from with -p, default is normal core */
> > + char *device_name = "/dev/mem";
> > + struct stat statbuf;
> > + int device_specified = 0;
> > + const char *env_testmask = 0;
> > + ul testmask = 0;
> > +
> > + printf("memtester version " __version__ " (%d-bit)\n", UL_LEN);
> > + printf("Copyright (C) 2001-2012 Charles Cazabon.\n");
> > + printf("Licensed under the GNU General Public License version 2 (only).\n");
> > + printf("\n");
> > +
> > + /* If MEMTESTER_TEST_MASK is set, we use its value as a mask of which
> > + tests we run.
> > + */
> > + if ((env_testmask = getenv("MEMTESTER_TEST_MASK"))) {
> > + errno = 0;
> > + testmask = simple_strtoul(env_testmask, 0, 0);
> > + if (errno) {
> > + printf("error parsing MEMTESTER_TEST_MASK %s: %s\n",
> > + env_testmask, strerror(errno));
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + printf("using testmask 0x%lx\n", testmask);
> > + }
> > +
> > + while ((opt = getopt(argc, argv, "p:d:")) != -1) {
> > + switch (opt) {
> > + case 'p':
> > + errno = 0;
> > + physaddrbase = (off_t) simple_strtoull(optarg, &addrsuffix, 16);
> > + if (errno != 0) {
> > + printf("failed to parse physaddrbase arg; should be hex "
> > + "address (0x123...)\n");
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + if (*addrsuffix != '\0') {
> > + /* got an invalid character in the address */
> > + printf("failed to parse physaddrbase arg; should be hex "
> > + "address (0x123...)\n");
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + /* okay, got address */
> > + use_phys = 1;
> > + break;
> > + case 'd':
> > + if (stat(optarg,&statbuf)) {
> > + printf("can not use %s as device: %s\n", optarg,
> > + strerror(errno));
> > + return COMMAND_ERROR_USAGE;
> > + } else {
> > + if (!S_ISCHR(statbuf.st_mode)) {
> > + printf("can not mmap non-char device %s\n",
> > + optarg);
> > + return COMMAND_ERROR_USAGE;
> > + } else {
> > + device_name = optarg;
> > + device_specified = 1;
> > + }
> > + }
> > + break;
> > + default: /* '?' */
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + }
> > + if (device_specified && !use_phys) {
> > + printf("for mem device, physaddrbase (-p) must be specified\n");
> > + return COMMAND_ERROR_USAGE;
> > + }
> > +
> > + if (optind >= argc) {
> > + printf("need memory argument, in MB\n");
> > + return COMMAND_ERROR_USAGE;
> > + }
> > +
> > + errno = 0;
> > + wantraw = (size_t) simple_strtoul(argv[optind], &memsuffix, 0);
> > + if (errno != 0) {
> > + printf("failed to parse memory argument");
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + switch (*memsuffix) {
> > + case 'G':
> > + case 'g':
> > + memshift = 30; /* gigabytes */
> > + break;
> > + case 'M':
> > + case 'm':
> > + memshift = 20; /* megabytes */
> > + break;
> > + case 'K':
> > + case 'k':
> > + memshift = 10; /* kilobytes */
> > + break;
> > + case 'B':
> > + case 'b':
> > + memshift = 0; /* bytes*/
> > + break;
> > + case '\0': /* no suffix */
> > + memshift = 20; /* megabytes */
> > + break;
> > + default:
> > + /* bad suffix */
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + wantbytes_orig = wantbytes = ((size_t) wantraw << memshift);
> > + wantmb = (wantbytes_orig >> 20);
> > + optind++;
> > + if (wantmb > maxmb) {
> > + printf("This system can only address %llu MB.\n", (ull) maxmb);
> > + return EXIT_FAIL_NONSTARTER;
> > + }
> > +
> > + if (optind >= argc) {
> > + loops = 0;
> > + } else {
> > + errno = 0;
> > + loops = simple_strtoul(argv[optind], &loopsuffix, 0);
> > + if (errno != 0) {
> > + printf("failed to parse number of loops");
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + if (*loopsuffix != '\0') {
> > + printf("loop suffix %c\n", *loopsuffix);
> > + return COMMAND_ERROR_USAGE;
> > + }
> > + }
> > +
> > + printf("want %lluMB (%llu bytes)\n", (ull) wantmb, (ull) wantbytes);
> > + buf = NULL;
> > +
> > + if (use_phys) {
> > + memfd = open(device_name, O_RDWR);
> > + if (memfd == -1) {
> > + printf("failed to open %s for physical memory: %s\n",
> > + device_name, strerror(errno));
> > + return EXIT_FAIL_NONSTARTER;
> > + }
> > + buf = (void volatile *) memmap(memfd, PROT_READ | PROT_WRITE) +
> > + physaddrbase;
> > + if (buf == MAP_FAILED) {
> > + printf("failed to mmap %s for physical memory: %s\n",
> > + device_name, strerror(errno));
> > + return EXIT_FAIL_NONSTARTER;
> > + }
> > +
> > + bufsize = wantbytes; /* accept no less */
> > + } else {
> > + buf = (void volatile *) malloc(wantbytes);
> > + if (!buf) {
> > + printf("malloc failed\n");
> > + return ENOMEM;
> > + }
> > + printf("got %lluMB (%llu bytes)\n", (ull) wantbytes >> 20,
> > + (ull) wantbytes);
> > + }
> > + bufsize = wantbytes;
> > + aligned = buf;
> > +
> > + printf("buffer @ 0x%p\n", buf);
> > +
> > + halflen = bufsize / 2;
> > + count = halflen / sizeof(ul);
> > + bufa = (ulv *) aligned;
> > + bufb = (ulv *) ((size_t) aligned + halflen);
> > +
> > + for(loop=1; ((!loops) || loop <= loops); loop++) {
> > + printf("Loop %lu", loop);
> > + if (loops) {
> > + printf("/%lu", loops);
> > + }
> > + printf(":\n");
> > + printf(" %-20s: ", "Stuck Address");
> > + console_flush();
> > + ret = test_stuck_address(aligned, bufsize / sizeof(ul));
> > + if (!ret) {
> > + printf("ok\n");
> > + } else if (ret == -EINTR) {
> > + goto out;
> > + } else {
> > + exit_code |= EXIT_FAIL_ADDRESSLINES;
> > + }
> > + for (i=0;;i++) {
> > + if (!tests[i].name) break;
> > + /* If using a custom testmask, only run this test if the
> > + bit corresponding to this test was set by the user.
> > + */
> > + if (testmask && (!((1 << i) & testmask))) {
> > + continue;
> > + }
> > + printf(" %-20s: ", tests[i].name);
> > + ret = tests[i].fp(bufa, bufb, count);
> > + if (!ret) {
> > + printf("ok\n");
> > + } else if (ret == -EINTR) {
> > + goto out;
> > + } else {
> > + exit_code |= EXIT_FAIL_OTHERTEST;
> > + }
> > + console_flush();
> > + }
> > + printf("\n");
> > + console_flush();
> > + }
> > +out:
> > + if (use_phys)
> > + close(memfd);
> > + else
> > + free((void *)buf);
> > + printf("Done.\n");
> > + console_flush();
> > + return exit_code;
> > +}
> > +
> > +BAREBOX_CMD_HELP_START(memtester)
> > +BAREBOX_CMD_HELP_TEXT("Options:")
> > +BAREBOX_CMD_HELP_TEXT("-p PHYSADDR")
> > +BAREBOX_CMD_HELP_TEXT(" tells memtester to test a specific region of memory starting at physical")
> > +BAREBOX_CMD_HELP_TEXT(" address PHYSADDR (given in hex), by mmaping a device specified by the -d")
> > +BAREBOX_CMD_HELP_TEXT(" option (below, or /dev/mem by default).")
> > +BAREBOX_CMD_HELP_TEXT("")
> > +BAREBOX_CMD_HELP_TEXT("-d DEVICE")
> > +BAREBOX_CMD_HELP_TEXT(" a device to mmap")
> > +BAREBOX_CMD_HELP_TEXT("")
> > +BAREBOX_CMD_HELP_TEXT("MEMORY ")
> > +BAREBOX_CMD_HELP_TEXT(" the amount of memory to allocate and test, in megabytes by default. You")
> > +BAREBOX_CMD_HELP_TEXT(" can include a suffix of B, K, M, or G to indicate bytes, kilobytes, ")
> > +BAREBOX_CMD_HELP_TEXT(" megabytes, or gigabytes respectively.")
> > +BAREBOX_CMD_HELP_TEXT("")
> > +BAREBOX_CMD_HELP_TEXT("ITERATIONS")
> > +BAREBOX_CMD_HELP_TEXT(" (optional) number of loops to iterate through. Default is infinite.")
> > +BAREBOX_CMD_HELP_END
> > +
> > +BAREBOX_CMD_START(memtester)
> > + .cmd = do_memtester,
> > + BAREBOX_CMD_DESC("memory stress-testing")
> > + BAREBOX_CMD_OPTS("[-p PHYSADDR [-d DEVICE]] <MEMORY>[B|K|M|G] [ITERATIONS]")
> > + BAREBOX_CMD_GROUP(CMD_GRP_MEM)
> > + BAREBOX_CMD_HELP(cmd_memtester_help)
> > +BAREBOX_CMD_END
> > diff --git a/commands/memtester/memtester.h b/commands/memtester/memtester.h
> > new file mode 100644
> > index 0000000000..6469e034a4
> > --- /dev/null
> > +++ b/commands/memtester/memtester.h
> > @@ -0,0 +1,22 @@
> > +/*
> > + * Very simple (yet, for some reason, very effective) memory tester.
> > + * Originally by Simon Kirby <sim@stormix.com> <sim@neato.org>
> > + * Version 2 by Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Version 3 not publicly released.
> > + * Version 4 rewrite:
> > + * Copyright (C) 2004-2012 Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Licensed under the terms of the GNU General Public License version 2 (only).
> > + * See the file COPYING for details.
>
> same here
>
> > + *
> > + * This file contains the declarations for external variables from the main file.
> > + * See other comments in that file.
> > + *
> > + */
> > +
> > +#include <types.h>
> > +
> > +/* extern declarations. */
> > +
> > +extern int use_phys;
> > +extern off_t physaddrbase;
> > +
> > diff --git a/commands/memtester/sizes.h b/commands/memtester/sizes.h
> > new file mode 100644
> > index 0000000000..09ce38cbc0
> > --- /dev/null
> > +++ b/commands/memtester/sizes.h
> > @@ -0,0 +1,38 @@
> > +/*
> > + * Very simple but very effective user-space memory tester.
> > + * Originally by Simon Kirby <sim@stormix.com> <sim@neato.org>
> > + * Version 2 by Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Version 3 not publicly released.
> > + * Version 4 rewrite:
> > + * Copyright (C) 2004-2012 Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Licensed under the terms of the GNU General Public License version 2 (only).
> > + * See the file COPYING for details.
>
> and here
>
> > + *
> > + * This file contains some macro definitions for handling 32/64 bit platforms.
> > + *
> > + */
> > +
> > +#include <linux/limits.h>
> > +
> > +#define rand32() ((unsigned int) rand() | ( (unsigned int) rand() << 16))
> > +
> > +#if defined(CONFIG_32BIT)
> > + #define rand_ul() rand32()
> > + #define UL_ONEBITS 0xffffffff
> > + #define UL_LEN 32
> > + #define CHECKERBOARD1 0x55555555
> > + #define CHECKERBOARD2 0xaaaaaaaa
> > + #define UL_BYTE(x) ((x | x << 8 | x << 16 | x << 24))
> > +#elif defined(CONFIG_64BIT)
> > + #define rand64() (((ul) rand32()) << 32 | ((ul) rand32()))
> > + #define rand_ul() rand64()
> > + #define UL_ONEBITS 0xffffffffffffffffUL
> > + #define UL_LEN 64
> > + #define CHECKERBOARD1 0x5555555555555555
> > + #define CHECKERBOARD2 0xaaaaaaaaaaaaaaaa
> > + #define UL_BYTE(x) (((ul)x | (ul)x<<8 | (ul)x<<16 | (ul)x<<24 | (ul)x<<32 | (ul)x<<40 | (ul)x<<48 | (ul)x<<56))
> > +#else
> > + #error long on this platform is not 32 or 64 bits
> > +#endif
> > +
> > +
> > diff --git a/commands/memtester/tests.c b/commands/memtester/tests.c
> > new file mode 100644
> > index 0000000000..c69dfcb953
> > --- /dev/null
> > +++ b/commands/memtester/tests.c
> > @@ -0,0 +1,538 @@
> > +/*
> > + * Very simple but very effective user-space memory tester.
> > + * Originally by Simon Kirby <sim@stormix.com> <sim@neato.org>
> > + * Version 2 by Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Version 3 not publicly released.
> > + * Version 4 rewrite:
> > + * Copyright (C) 2004-2012 Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Licensed under the terms of the GNU General Public License version 2 (only).
> > + * See the file COPYING for details.
>
> and here
>
> > + *
> > + * This file contains the functions for the actual tests, called from the
> > + * main routine in memtester.c. See other comments in that file.
> > + *
> > + */
> > +
> > +#include <common.h>
> > +#include <types.h>
> > +#include <stdio.h>
> > +#include <stdlib.h>
> > +#include <linux/limits.h>
> > +
> > +#include "types.h"
> > +#include "sizes.h"
> > +#include "memtester.h"
> > +#include "tests.h"
> > +
> > +char progress[] = "-\\|/";
> > +#define PROGRESSLEN 4
> > +#define PROGRESSOFTEN 2500
> > +#define ONE 0x00000001L
> > +
> > +mword8_t mword8;
> > +mword16_t mword16;
> > +
> > +/* Function definitions. */
> > +
> > +static int compare_regions(ulv *bufa, ulv *bufb, size_t count) {
> > + int r = 0;
> > + size_t i;
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + off_t physaddr;
> > +
> > + if (ctrlc())
> > + return -EINTR;
> > +
> > + for (i = 0; i < count; i++, p1++, p2++) {
> > + if (*p1 != *p2) {
> > + if (use_phys) {
> > + physaddr = physaddrbase + (i * sizeof(ul));
> > + printf("FAILURE: 0x%08lx != 0x%08lx at physical address "
> > + "0x%08lx.\n",
> > + (ul) *p1, (ul) *p2, physaddr);
> > + } else {
> > + printf("FAILURE: 0x%08lx != 0x%08lx at offset 0x%08lx.\n",
> > + (ul) *p1, (ul) *p2, (ul) (i * sizeof(ul)));
> > + }
> > + /* printf("Skipping to next test..."); */
> > + r = -1;
> > + }
> > + }
> > + return r;
> > +}
> > +
> > +int test_stuck_address(ulv *bufa, size_t count) {
> > + ulv *p1 = bufa;
> > + unsigned int j;
> > + size_t i;
> > + off_t physaddr;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (j = 0; j < 16; j++) {
> > + if (ctrlc())
> > + return -EINTR;
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + p1 = (ulv *) bufa;
> > + printf("setting %3u", j);
> > + console_flush();
> > + for (i = 0; i < count; i++) {
> > + *p1 = ((j + i) % 2) == 0 ? (ul) p1 : ~((ul) p1);
> > + *p1++;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", j);
> > + console_flush();
> > + p1 = (ulv *) bufa;
> > + for (i = 0; i < count; i++, p1++) {
> > + if (*p1 != (((j + i) % 2) == 0 ? (ul) p1 : ~((ul) p1))) {
> > + if (use_phys) {
> > + physaddr = physaddrbase + (i * sizeof(ul));
> > + printf("FAILURE: possible bad address line at physical "
> > + "address 0x%08lx.\n",
> > + physaddr);
> > + } else {
> > + printf("FAILURE: possible bad address line at offset "
> > + "0x%08lx.\n",
> > + (ul) (i * sizeof(ul)));
> > + }
> > + printf("Skipping to next test...\n");
> > + console_flush();
> > + return -1;
> > + }
> > + }
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_random_value(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + ul j = 0;
> > + size_t i;
> > +
> > + putchar(' ');
> > + console_flush();
> > + for (i = 0; i < count; i++) {
> > + *p1++ = *p2++ = rand_ul();
> > + if (!(i % PROGRESSOFTEN)) {
> > + putchar('\b');
> > + putchar(progress[++j % PROGRESSLEN]);
> > + console_flush();
> > + }
> > + }
> > + printf("\b \b");
> > + console_flush();
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_xor_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + size_t i;
> > + ul q = rand_ul();
> > +
> > + for (i = 0; i < count; i++) {
> > + *p1++ ^= q;
> > + *p2++ ^= q;
> > + }
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_sub_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + size_t i;
> > + ul q = rand_ul();
> > +
> > + for (i = 0; i < count; i++) {
> > + *p1++ -= q;
> > + *p2++ -= q;
> > + }
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_mul_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + size_t i;
> > + ul q = rand_ul();
> > +
> > + for (i = 0; i < count; i++) {
> > + *p1++ *= q;
> > + *p2++ *= q;
> > + }
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_div_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + size_t i;
> > + ul q = rand_ul();
> > +
> > + for (i = 0; i < count; i++) {
> > + if (!q) {
> > + q++;
> > + }
> > + *p1++ /= q;
> > + *p2++ /= q;
> > + }
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_or_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + size_t i;
> > + ul q = rand_ul();
> > +
> > + for (i = 0; i < count; i++) {
> > + *p1++ |= q;
> > + *p2++ |= q;
> > + }
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_and_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + size_t i;
> > + ul q = rand_ul();
> > +
> > + for (i = 0; i < count; i++) {
> > + *p1++ &= q;
> > + *p2++ &= q;
> > + }
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_seqinc_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + size_t i;
> > + ul q = rand_ul();
> > +
> > + for (i = 0; i < count; i++) {
> > + *p1++ = *p2++ = (i + q);
> > + }
> > + return compare_regions(bufa, bufb, count);
> > +}
> > +
> > +int test_solidbits_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + unsigned int j;
> > + ul q;
> > + size_t i;
> > + int ret;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (j = 0; j < 64; j++) {
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + q = (j % 2) == 0 ? UL_ONEBITS : 0;
> > + printf("setting %3u", j);
> > + console_flush();
> > + p1 = (ulv *) bufa;
> > + p2 = (ulv *) bufb;
> > + for (i = 0; i < count; i++) {
> > + *p1++ = *p2++ = (i % 2) == 0 ? q : ~q;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", j);
> > + console_flush();
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_checkerboard_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + unsigned int j;
> > + ul q;
> > + size_t i;
> > + int ret;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (j = 0; j < 64; j++) {
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + q = (j % 2) == 0 ? CHECKERBOARD1 : CHECKERBOARD2;
> > + printf("setting %3u", j);
> > + console_flush();
> > + p1 = (ulv *) bufa;
> > + p2 = (ulv *) bufb;
> > + for (i = 0; i < count; i++) {
> > + *p1++ = *p2++ = (i % 2) == 0 ? q : ~q;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", j);
> > + console_flush();
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_blockseq_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + unsigned int j;
> > + size_t i;
> > + int ret;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (j = 0; j < 256; j++) {
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + p1 = (ulv *) bufa;
> > + p2 = (ulv *) bufb;
> > + printf("setting %3u", j);
> > + console_flush();
> > + for (i = 0; i < count; i++) {
> > + *p1++ = *p2++ = (ul) UL_BYTE(j);
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", j);
> > + console_flush();
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_walkbits0_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + unsigned int j;
> > + size_t i;
> > + int ret;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (j = 0; j < UL_LEN * 2; j++) {
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + p1 = (ulv *) bufa;
> > + p2 = (ulv *) bufb;
> > + printf("setting %3u", j);
> > + console_flush();
> > + for (i = 0; i < count; i++) {
> > + if (j < UL_LEN) { /* Walk it up. */
> > + *p1++ = *p2++ = ONE << j;
> > + } else { /* Walk it back down. */
> > + *p1++ = *p2++ = ONE << (UL_LEN * 2 - j - 1);
> > + }
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", j);
> > + console_flush();
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_walkbits1_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + unsigned int j;
> > + size_t i;
> > + int ret;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (j = 0; j < UL_LEN * 2; j++) {
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + p1 = (ulv *) bufa;
> > + p2 = (ulv *) bufb;
> > + printf("setting %3u", j);
> > + console_flush();
> > + for (i = 0; i < count; i++) {
> > + if (j < UL_LEN) { /* Walk it up. */
> > + *p1++ = *p2++ = UL_ONEBITS ^ (ONE << j);
> > + } else { /* Walk it back down. */
> > + *p1++ = *p2++ = UL_ONEBITS ^ (ONE << (UL_LEN * 2 - j - 1));
> > + }
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", j);
> > + console_flush();
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_bitspread_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + unsigned int j;
> > + size_t i;
> > + int ret;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (j = 0; j < UL_LEN * 2; j++) {
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + p1 = (ulv *) bufa;
> > + p2 = (ulv *) bufb;
> > + printf("setting %3u", j);
> > + console_flush();
> > + for (i = 0; i < count; i++) {
> > + if (j < UL_LEN) { /* Walk it up. */
> > + *p1++ = *p2++ = (i % 2 == 0)
> > + ? (ONE << j) | (ONE << (j + 2))
> > + : UL_ONEBITS ^ ((ONE << j)
> > + | (ONE << (j + 2)));
> > + } else { /* Walk it back down. */
> > + *p1++ = *p2++ = (i % 2 == 0)
> > + ? (ONE << (UL_LEN * 2 - 1 - j)) | (ONE << (UL_LEN * 2 + 1 - j))
> > + : UL_ONEBITS ^ (ONE << (UL_LEN * 2 - 1 - j)
> > + | (ONE << (UL_LEN * 2 + 1 - j)));
> > + }
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", j);
> > + console_flush();
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_bitflip_comparison(ulv *bufa, ulv *bufb, size_t count) {
> > + ulv *p1 = bufa;
> > + ulv *p2 = bufb;
> > + unsigned int j, k;
> > + ul q;
> > + size_t i;
> > + int ret;
> > +
> > + printf(" ");
> > + console_flush();
> > + for (k = 0; k < UL_LEN; k++) {
> > + q = ONE << k;
> > + for (j = 0; j < 8; j++) {
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + q = ~q;
> > + printf("setting %3u", k * 8 + j);
> > + console_flush();
> > + p1 = (ulv *) bufa;
> > + p2 = (ulv *) bufb;
> > + for (i = 0; i < count; i++) {
> > + *p1++ = *p2++ = (i % 2) == 0 ? q : ~q;
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b");
> > + printf("testing %3u", k * 8 + j);
> > + console_flush();
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return -1;
> > + }
> > + }
> > + printf("\b\b\b\b\b\b\b\b\b\b\b \b\b\b\b\b\b\b\b\b\b\b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_8bit_wide_random(ulv* bufa, ulv* bufb, size_t count) {
> > + u8v *p1, *t;
> > + ulv *p2;
> > + int attempt;
> > + unsigned int b, j = 0;
> > + size_t i;
> > + int ret;
> > +
> > + putchar(' ');
> > + console_flush();
> > + for (attempt = 0; attempt < 2; attempt++) {
> > + if (attempt & 1) {
> > + p1 = (u8v *) bufa;
> > + p2 = bufb;
> > + } else {
> > + p1 = (u8v *) bufb;
> > + p2 = bufa;
> > + }
> > + for (i = 0; i < count; i++) {
> > + t = mword8.bytes;
> > + *p2++ = mword8.val = rand_ul();
> > + for (b=0; b < UL_LEN/8; b++) {
> > + *p1++ = *t++;
> > + }
> > + if (!(i % PROGRESSOFTEN)) {
> > + putchar('\b');
> > + putchar(progress[++j % PROGRESSLEN]);
> > + console_flush();
> > + }
> > + }
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b \b");
> > + console_flush();
> > + return 0;
> > +}
> > +
> > +int test_16bit_wide_random(ulv* bufa, ulv* bufb, size_t count) {
> > + u16v *p1, *t;
> > + ulv *p2;
> > + int attempt;
> > + unsigned int b, j = 0;
> > + size_t i;
> > + int ret;
> > +
> > + putchar( ' ' );
> > + console_flush();
> > + for (attempt = 0; attempt < 2; attempt++) {
> > + if (attempt & 1) {
> > + p1 = (u16v *) bufa;
> > + p2 = bufb;
> > + } else {
> > + p1 = (u16v *) bufb;
> > + p2 = bufa;
> > + }
> > + for (i = 0; i < count; i++) {
> > + t = mword16.u16s;
> > + *p2++ = mword16.val = rand_ul();
> > + for (b = 0; b < UL_LEN/16; b++) {
> > + *p1++ = *t++;
> > + }
> > + if (!(i % PROGRESSOFTEN)) {
> > + putchar('\b');
> > + putchar(progress[++j % PROGRESSLEN]);
> > + console_flush();
> > + }
> > + }
> > + ret = compare_regions(bufa, bufb, count);
> > + if (ret)
> > + return ret;
> > + }
> > + printf("\b \b");
> > + console_flush();
> > + return 0;
> > +}
> > diff --git a/commands/memtester/tests.h b/commands/memtester/tests.h
> > new file mode 100644
> > index 0000000000..7f7eb1a497
> > --- /dev/null
> > +++ b/commands/memtester/tests.h
> > @@ -0,0 +1,37 @@
> > +/*
> > + * Very simple yet very effective memory tester.
> > + * Originally by Simon Kirby <sim@stormix.com> <sim@neato.org>
> > + * Version 2 by Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Version 3 not publicly released.
> > + * Version 4 rewrite:
> > + * Copyright (C) 2004-2012 Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Licensed under the terms of the GNU General Public License version 2 (only).
> > + * See the file COPYING for details.
>
> and here
>
> > + *
> > + * This file contains the declarations for the functions for the actual tests,
> > + * called from the main routine in memtester.c. See other comments in that
> > + * file.
> > + *
> > + */
> > +
> > +/* Function declaration. */
> > +
> > +int test_stuck_address(unsigned long volatile *bufa, size_t count);
> > +int test_random_value(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_xor_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_sub_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_mul_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_div_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_or_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_and_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_seqinc_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_solidbits_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_checkerboard_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_blockseq_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_walkbits0_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_walkbits1_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_bitspread_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_bitflip_comparison(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_8bit_wide_random(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +int test_16bit_wide_random(unsigned long volatile *bufa, unsigned long volatile *bufb, size_t count);
> > +
> > diff --git a/commands/memtester/types.h b/commands/memtester/types.h
> > new file mode 100644
> > index 0000000000..8591a800b9
> > --- /dev/null
> > +++ b/commands/memtester/types.h
> > @@ -0,0 +1,36 @@
> > +/*
> > + * Very simple but very effective user-space memory tester.
> > + * Originally by Simon Kirby <sim@stormix.com> <sim@neato.org>
> > + * Version 2 by Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Version 3 not publicly released.
> > + * Version 4 rewrite:
> > + * Copyright (C) 2004-2010 Charles Cazabon <charlesc-memtester@pyropus.ca>
> > + * Licensed under the terms of the GNU General Public License version 2 (only).
> > + * See the file COPYING for details.
>
> and here.
>
> - Roland
>
> > + *
> > + * This file contains typedefs, structure, and union definitions.
> > + *
> > + */
> > +
> > +#include "sizes.h"
> > +
> > +typedef unsigned long ul;
> > +typedef unsigned long long ull;
> > +typedef unsigned long volatile ulv;
> > +typedef unsigned char volatile u8v;
> > +typedef unsigned short volatile u16v;
> > +
> > +struct test {
> > + char *name;
> > + int (*fp)(ulv *, ulv *, size_t);
> > +};
> > +
> > +typedef union {
> > + unsigned char bytes[UL_LEN/8];
> > + ul val;
> > +} mword8_t;
> > +
> > +typedef union {
> > + unsigned short u16s[UL_LEN/16];
> > + ul val;
> > +} mword16_t;
> > --
> > 2.24.0
> >
> >
> > _______________________________________________
> > barebox mailing list
> > barebox@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/barebox
> >
>
> --
> Roland Hieber, Pengutronix e.K. | r.hieber@pengutronix.de |
> Steuerwalder Str. 21 | https://www.pengutronix.de/ |
> 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
> Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-08-28 10:29 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-08-26 14:26 Peter Mamonov
2020-08-27 8:45 ` Roland Hieber
2020-08-28 10:28 ` Peter Mamonov [this message]
2020-08-28 6:29 ` Sascha Hauer
2020-08-28 10:25 ` Peter Mamonov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200828102857.GB26484@chr \
--to=pmamonov@gmail.com \
--cc=barebox@lists.infradead.org \
--cc=rhi@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox