From: Sascha Hauer <s.hauer@pengutronix.de>
To: Yunus Bas <y.bas@phytec.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2] ARM: dts: imx6ul: phycore: Add phyCORE i.MX6 UL with eMMC
Date: Fri, 2 Oct 2020 09:18:49 +0200 [thread overview]
Message-ID: <20201002071849.GB12463@pengutronix.de> (raw)
In-Reply-To: <20201001094915.29005-1-y.bas@phytec.de>
On Thu, Oct 01, 2020 at 11:49:15AM +0200, Yunus Bas wrote:
> Add a phyCORE-i.MX 6UL with eMMC. It has following features:
> - i.MX 6UL
> - 512 MB RAM
> - eMMC
> - 10/100 MBits Ethernet
> - USB OTG
> - USB Host
>
> Signed-off-by: Yunus Bas <y.bas@phytec.de>
> ---
> Changes in v2:
> - Added missing include for the FIT-Image verification
> ---
> arch/arm/boards/phytec-som-imx6/lowlevel.c | 1 +
> arch/arm/dts/Makefile | 1 +
> .../dts/imx6ul-phytec-phycore-som-emmc.dts | 45 +++++++++++++++++++
> images/Makefile.imx | 2 +
> 4 files changed, 49 insertions(+)
> create mode 100644 arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts
>
> diff --git a/arch/arm/boards/phytec-som-imx6/lowlevel.c b/arch/arm/boards/phytec-som-imx6/lowlevel.c
> index 407115c2a..62a1c8de7 100644
> --- a/arch/arm/boards/phytec-som-imx6/lowlevel.c
> +++ b/arch/arm/boards/phytec-som-imx6/lowlevel.c
> @@ -110,6 +110,7 @@ PHYTEC_ENTRY(start_phytec_phycore_imx6qp_som_nand_1gib, imx6qp_phytec_phycore_so
> PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_1gib, imx6q_phytec_phycore_som_emmc, SZ_1G, true);
> PHYTEC_ENTRY(start_phytec_phycore_imx6q_som_emmc_2gib, imx6q_phytec_phycore_som_emmc, SZ_2G, true);
>
> +PHYTEC_ENTRY(start_phytec_phycore_imx6ul_som_emmc_512mb, imx6ul_phytec_phycore_som_emmc, SZ_512M, false);
> PHYTEC_ENTRY(start_phytec_phycore_imx6ul_som_nand_512mb, imx6ul_phytec_phycore_som_nand, SZ_512M, false);
> PHYTEC_ENTRY(start_phytec_phycore_imx6ull_som_lc_nand_256mb, imx6ull_phytec_phycore_som_lc_nand, SZ_256M, false);
> PHYTEC_ENTRY(start_phytec_phycore_imx6ull_som_nand_512mb, imx6ull_phytec_phycore_som_nand, SZ_512M, false);
> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
> index af061bd29..37e0f07b9 100644
> --- a/arch/arm/dts/Makefile
> +++ b/arch/arm/dts/Makefile
> @@ -67,6 +67,7 @@ lwl-$(CONFIG_MACH_PHYTEC_SOM_IMX6) += imx6q-phytec-phycard.dtb.o \
> imx6dl-phytec-phycore-som-emmc.dtb.o \
> imx6dl-phytec-phycore-som-lc-emmc.dtb.o \
> imx6ul-phytec-phycore-som-nand.dtb.o \
> + imx6ul-phytec-phycore-som-emmc.dtb.o \
> imx6ull-phytec-phycore-som-lc-nand.dtb.o \
> imx6ull-phytec-phycore-som-nand.dtb.o \
> imx6ull-phytec-phycore-som-emmc.dtb.o
> diff --git a/arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts b/arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts
> new file mode 100644
> index 000000000..7d29c329a
> --- /dev/null
> +++ b/arch/arm/dts/imx6ul-phytec-phycore-som-emmc.dts
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT)
> +/*
> + * Copyright (C) 2020 PHYTEC Messtechnik GmbH
> + * Author: Yunus Bas <y.bas@phytec.de>
> + */
> +
> +/dts-v1/;
> +#ifdef CONFIG_BOOTM_FITIMAGE_PUBKEY
> +#include CONFIG_BOOTM_FITIMAGE_PUBKEY
> +#endif
> +#include <arm/imx6ul.dtsi>
> +#include "imx6ul-phytec-phycore-som.dtsi"
> +
> +/ {
> + model = "PHYTEC phyCORE-i.MX6 Ultra Light SOM with eMMC";
> + compatible = "phytec,imx6ul-pcl063-emmc", "fsl,imx6ul";
> +};
> +
> +&fec1 {
> + status = "okay";
> +};
> +
> +&i2c1 {
> + status = "okay";
> +};
> +
> +&uart1 {
> + status = "okay";
> +};
> +
> +&usdhc1 {
> + status = "okay";
> +};
> +
> +&usdhc2 {
> + status = "okay";
> +};
> +
> +&usbotg1 {
> + status = "okay";
> +};
> +
> +&usbotg2 {
> + status = "okay";
> +};
> diff --git a/images/Makefile.imx b/images/Makefile.imx
> index 7b24e5fee..2327b8a0b 100644
> --- a/images/Makefile.imx
> +++ b/images/Makefile.imx
> @@ -346,6 +346,8 @@ $(call build_imx_habv4img, CONFIG_MACH_GRINN_LITEBOARD, start_imx6ul_liteboard_5
>
> $(call build_imx_habv4img, CONFIG_MACH_NXP_IMX6ULL_EVK, start_nxp_imx6ull_evk, nxp-imx6ull-evk/flash-header-nxp-imx6ull-evk, nxp-imx6ull-evk)
>
> +$(call build_imx_habv4img, CONFIG_MACH_PHYTEC_SOM_IMX6, start_phytec_phycore_imx6ul_som_emmc_512mb, phytec-som-imx6/flash-header-phytec-pcl063-512mb, phytec-phycore-imx6ul-emmc-512mb)
> +
There is a 'ul' missing for mainline, should be:
phytec-som-imx6/flash-header-phytec-pcl063ul-512mb
I fixed this up here, please check -next branch if the result matches
your expectations.
Sascha
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2020-10-02 7:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-10-01 9:49 Yunus Bas
2020-10-02 4:37 ` Sascha Hauer
2020-10-02 7:18 ` Sascha Hauer [this message]
2020-10-07 12:29 ` Yunus Bas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201002071849.GB12463@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=y.bas@phytec.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox