[PATCH] Documentation: efi: update SnpDxe build instructions

[PATCH] Documentation: efi: update SnpDxe build instructions

[Philipp Zabel]

Some sources have been moved into git submodules and SnpDxe was
moved from MdeModulePkg to NetworkPkg.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
---
 Documentation/boards/efi.rst | 5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

diff --git a/Documentation/boards/efi.rst b/Documentation/boards/efi.rst
index f04b1d32378b..b12433014ef1 100644
--- a/Documentation/boards/efi.rst
+++ b/Documentation/boards/efi.rst
@@ -294,18 +294,19 @@ HOWTOs in the net, for example on http://tianocore.sourceforge.net/wiki/Using_ED
 
   git clone git://github.com/tianocore/edk2.git
   cd edk2
+  git submodule update --init
   make -C BaseTools
   . edksetup.sh
 
 At least the following lines in ``Conf/target.txt`` should be edited::
 
-  ACTIVE_PLATFORM = MdeModulePkg/MdeModulePkg.dsc
+  ACTIVE_PLATFORM = NetworkPkg/NetworkPkg.dsc
   TARGET_ARCH = X64
   TOOL_CHAIN_TAG = GCC48
   MAX_CONCURRENT_THREAD_NUMBER = 4
 
 The actual build is started with invoking ``build``. After building
-``Build/MdeModule/DEBUG_GCC48/X64/SnpDxe.efi`` should exist.
+``Build/NetworkPkg/DEBUG_GCC48/X64/SnpDxe.efi`` should exist.
 
 **NOTE** As of this writing (July 2014) the following patch was needed to
 compile EDK2.
-- 
2.20.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

Re: [PATCH] Documentation: efi: update SnpDxe build instructions

[Sascha Hauer]

On Wed, Oct 07, 2020 at 11:51:09AM +0200, Philipp Zabel wrote:
> Some sources have been moved into git submodules and SnpDxe was
> moved from MdeModulePkg to NetworkPkg.
> 
> Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
> ---
>  Documentation/boards/efi.rst | 5 +++--
>  1 file changed, 3 insertions(+), 2 deletions(-)

Applied, thanks

Sascha

> 
> diff --git a/Documentation/boards/efi.rst b/Documentation/boards/efi.rst
> index f04b1d32378b..b12433014ef1 100644
> --- a/Documentation/boards/efi.rst
> +++ b/Documentation/boards/efi.rst
> @@ -294,18 +294,19 @@ HOWTOs in the net, for example on http://tianocore.sourceforge.net/wiki/Using_ED
>  
>    git clone git://github.com/tianocore/edk2.git
>    cd edk2
> +  git submodule update --init
>    make -C BaseTools
>    . edksetup.sh
>  
>  At least the following lines in ``Conf/target.txt`` should be edited::
>  
> -  ACTIVE_PLATFORM = MdeModulePkg/MdeModulePkg.dsc
> +  ACTIVE_PLATFORM = NetworkPkg/NetworkPkg.dsc
>    TARGET_ARCH = X64
>    TOOL_CHAIN_TAG = GCC48
>    MAX_CONCURRENT_THREAD_NUMBER = 4
>  
>  The actual build is started with invoking ``build``. After building
> -``Build/MdeModule/DEBUG_GCC48/X64/SnpDxe.efi`` should exist.
> +``Build/NetworkPkg/DEBUG_GCC48/X64/SnpDxe.efi`` should exist.
>  
>  **NOTE** As of this writing (July 2014) the following patch was needed to
>  compile EDK2.
> -- 
> 2.20.1
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Pengutronix e.K.                           |                             |
Steuerwalder Str. 21                       | http://www.pengutronix.de/  |
31137 Hildesheim, Germany                  | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686           | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox