From mboxrd@z Thu Jan 1 00:00:00 1970 Return-path: Received: from metis.ext.pengutronix.de ([2001:67c:670:201:290:27ff:fe1d:cc33]) by merlin.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1kSbFn-0004EN-8D for barebox@lists.infradead.org; Wed, 14 Oct 2020 07:31:20 +0000 Date: Wed, 14 Oct 2020 09:31:16 +0200 From: Sascha Hauer Message-ID: <20201014073116.GC13710@pengutronix.de> MIME-Version: 1.0 Content-Disposition: inline List-Id: List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="iso-8859-15" Content-Transfer-Encoding: quoted-printable Sender: "barebox" Errors-To: barebox-bounces+u.kleine-koenig=pengutronix.de@lists.infradead.org Subject: v2020.10.0 To: Barebox List Hi All, I just released barebox-2020.10.0. The last releases were relatively small, now here comes a bigger one. Finally this release has Fastboot over ethernet support. On the host side this feels like regular fastboot over USB, just with specifying a device with udp:[:port] instead of a USB device. On barebox side this is the first time we actively wait for an incoming connection in the background. This means that network packets are now received in a poller. This may cause sluggish behaviour when a network driver doesn't return immediately when there are no packets available in the receive function. Check out and report if necessary. A nice side effect though is that barebox now answers incoming ping requests. Bugs like use-after-free or out of bounds memory accesses used to be a pain to track down, so I am happy to say that we now have KASan support for ARM and ARM64. KASan makes finding such bugs very easy, so check out. As usual for a full list of patches see below. Have Fun! Sascha ---------------------------------------------------------------- Ahmad Fatoum (40): video: ipuv3: parallel-display: support of_graph binding video: simple-panel: don't error out on unhandled ioctl command mfd: stpmic1: warn if reset reason detection fails ARM: stm32mp: enable mmc_extcsd in defconfig fs: don't free device in remove callback Documentation: boards: stm32mp: document eMMC boot configuration lib: lzo: drop unused compression code sandbox: hostfile: error out if file couldn't be opened sandbox: add_image: support mmaping block devices on 32-bit hosts sandbox: support escaping commas in --image filenames readkey: fix buffer overflow handling longer escape sequences sandbox: fix SANDBOX_UNWIND dependency to be KASAN only common: ubsan: replace pr_err with printf lib: string: retire deprecated strtok() in favor of reentrant strsep() ls: don't print . and .. on recursive ls sandbox: implement simple, ^C-interruptible, restart handler sandbox: implement actual sandbox reset via exec(2) ls: align file size correctly on non-ARM 64-bit platforms sandbox: hostfile: support registering images as barebox block devices boot: ignore all spaces between boot targets blspec: devicetree-overlay: don't warn on multiple delimiting spaces common: restart: number unnamed restart handlers restart: give all restart handlers a descriptive name commands: reset: allow specifying reset by name regulator: provide regulator_get_name() stub for !CONFIG_REGULATOR README: update to reflect current state README: use lower-case barebox spelling sandbox: unwind: fix indentation ARM: dts: stm32mp: drop no longer needed PSCI version override commands: setenv: support setenv dev.var=3DVAL syntax commands: setenv: allow use with hush shell globalvar: allow running actions on set with globalvar_add_bool() lib: kasan: migrate Kconfig option to Debugging menu ARM: psci: fix NULL pointer dereference on CPU idle treewide: fix unterminated of_device_id[] reported by Coccinelle net: macb: fix wrong return values on some errors scripts: kwbimage: fix wrong return values on some errors ARM: layerscape: ppa: fix wrong return values on some errors logo: Makefile: fix Inkscape >=3D v1.0 Wayland GUI opening on LOGO.S logo: Makefile: fix indentation of LOGO.S in quiet output Albert Schwarzkopf (2): common: bootm: Add missing check of fit_open_image() return code bootm: Allow loading OP-TEE from FIT image Daniel Gl=F6ckner (1): fastboot: rename usbgadget.fastboot_* variables to fastboot.* Edmund Henniges (1): fastboot net: implement fastboot over UDP Juergen Borleis (5): commands: mmc_extcsd: print_field: fix 32 bit overflow commands: mmc_extcsd: print_field: fix layout mci: kconfig: explain what boot partitions are mci: mci-core: add GPP support mci: mci-core: fix long lasting FIXMEs Lars Pedersen (1): arm: imx: Select RELOCATABLE on IMX_MULTI_BOARDS Maik Otto (2): arch: arm: boards phytec: Split flash header for pcl063 with i.MX6Ul = and i.MX6ULL arch: arm: mach-imx: Add habv4 config file for i.MX6ULL Marco Felsch (1): ARM: cm-fx6: fix build dependency Masahiro Yamada (6): scripts: remove redundant setupmbr addition to subdir- kvx,riscv: remove unused $(dtb-y) assignment sandbox: add sandbox.dtb to always-y kbuild: sync the top level Kbuild file with Linux kconfig: update to Linux 5.9-rc2 kbuild: introduce hostprogs-always-y and userprogs-always-y Oleksij Rempel (14): of: base: register DT root as device gpiolib: add gpio_array_to_id helper to get ID out of GPIO array common: console_common: add of_console_get_by_alias() helper of: of_device_get_match_compatible() helper ARM: protonic-imx6: port Protonic specific board code ARM: dts: unify barebox and barebox, env partitions for all Protonic = boards ARM: dts: imx6q-prti6q: add pstore/ramoops node ARM: dts: protonic: lanmcu: add eMMC partition table ARM: dts: protonic: add fixed clock for the FEC node ARM: dts: protonic: lanmcu: use UART_CTS instead of GPIO based CTS ARM: dts: protonic: properly define PHY nodes on lanmcu and plym2m bo= ards ARM: dts: protonic: lanmcu: add uart-has-rtscts to enable rs485 funct= ionality serial: imx: set CTS if DT property "linux, rs485-enabled-at-boot-tim= e" is present ARM: protonic: disable on-die termination to fix PHY bootstrapping Philipp Zabel (1): Documentation: efi: update SnpDxe build instructions Robert Karszniewicz (3): bootm: add global.bootm.root_dev env var for booting via PARTUUID scripts: compiler.h: include README: add some commas for clarity Roland Hieber (3): common: remove negative dependency on SANDBOX for IMD_TARGET sandbox: add a minimal defconfig to build only the host tools mci: bcm2835: depend on sdhci Rouven Czerwinski (4): globalvar: add globalvar_set function blspec: only reset variable locations, not paths blspec: fix bootm_data initialization fastboot: only unset image, not loadaddr Sascha Hauer (83): Introduce slices Add workqueues ratp: Switch to workqueues net: eth: rename __eth_rx() net: Add a slice to struct eth_device net: mdiobus: Add slice usb: Add a slice to usb host controllers usbnet: Add slice net: Call net_poll() in a poller usbnet: shorten timeout when polling for receive packets net: reply to ping requests globalvar: Add helper for deprecated variable names fastboot: Warn when cb_download is called with file still open fastboot: Add fastboot_abort() fastboot: init list head in common usb: fastboot: execute commands in command context Add WARN_ONCE() macro fs: Warn when filesystem operations are called from a poller Documentation: Add document about background execution in barebox clk: imx: make string arrays const char * const * clk: imx: clk-pll14xx: remove debug leftover clk: imx-cpu: Add missing CLK_IS_CRITICAL clk: imx. clk-composite-8m: Update from Linux Kernel clk: imx: Add imx_clk_gate4_flags clk: imx: Add Linux function names clk: imx8mp: update clk driver from Linux kernel ddr: imx: Cleanup debug messages treewide: s/filed/failed/ treewide: s/filed/field/ workqueues: Add support for delayed work fs: Drop unnecessary dput() fs: Fix use after free powerpc: Add prototypes to header file powerpc: Add missing includes powerpc: Make locally used functions static powerpc: Add prototypes for functions called from assembly powerpc: Remove unused functions powerpc: Add function prototypes for exception handlers scripts: Make locally used functions static ARM: dts: beaglebone: Remove unnecessary tps65217.dtsi arm: Add prototypes for functions called from assembly openrisc: Add prototypes for functions called from assembly ARM: tx28: provide header file with function prototype ARM: tegra20-colibri-iris: drop regulators node ARM: versatile: Remove unused function openrisc: Add missing includes openrisc: Make locally used functions static scripts: tegra: Add missing include ARM: zync: Fix include path Add print_hex_dump kernel implementation Add _RET_IP_ macro Kallsyms: Also resolve global variables Add constructor support pbl: Alias memcpy and memset string: Add nokasan variants of default memcpy/memset sandbox: rename KASan to ASan dts: update to v5.9-rc2 dts: update to v5.9-rc3 dts: update to v5.9-rc4 dts: update to v5.9-rc5 Add KASan support ARM: Add KASan support clk_dump command: Allow printing a single clock usb: dwc3: Whitespace cleanup ARM: imx_v8_defconfig: Enable realtek phy arm: dts: imx: Adjust pwm-cells ARM: dts: imx8mq: Use ddr controller node from upstream ARM: dts: imx8mq: use mmc aliases from upstream clk: Add clk_bulk_[get|put]_all() usb: dwc3-of-simple: Use clk_bulk API Merge branch 'for-next/dts' into master Merge branch 'for-next/fs' into master Merge branch 'for-next/imx' into master Merge branch 'for-next/kasan' into master Merge branch 'for-next/kbuild' into master Merge branch 'for-next/license' into master Merge branch 'for-next/misc' into master Merge branch 'for-next/mmc' into master Merge branch 'for-next/net' into master Merge branch 'for-next/powerpc' into master Merge branch 'for-next/protonic' into master KASan: Add missing test code Release v2020.10.0 Thorsten Scherer (1): Documentation: user: fix referenced filename Uwe Kleine-K=F6nig (12): arm/cpu/*.S: Replace license and copyright boilerplate by SPDX identf= iers scripts/imx: fix typo "unkown" -> "unknown" arch/x86: Replace license and copyright boilerplate by SPDX identfiers scripts/spdxcheck: fix usage of non-existing variables LICENSES: add used licenses to make spdxcheck happy scripts: convert imx-image and mxsimage to SPDX LICENSES: add OpenSSL exception scripts/rsatoc: relicense to allow distribution of binary linked with= OpenSSL scripts/mxsimage: relicense to allow distribution of binary linked wi= th OpenSSL Regenerate defconfig files x86/config/efi: drop DRIVER_SERIAL_NS16550 scripts/imx-usb-loader: Drop duplicate definition of ALIGN Yann Sionneau (1): mci: fix wrong sd/mmc/emmc card size computation for arch where char = is signed -- = Pengutronix e.K. | | Steuerwalder Str. 21 | http://www.pengutronix.de/ | 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox