mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Marco Felsch <m.felsch@pengutronix.de>
To: Sascha Hauer <s.hauer@pengutronix.de>
Cc: barebox@lists.infradead.org,
	"Uwe Kleine-König" <u.kleine-koenig@pengutronix.de>
Subject: Re: [PATCH] usb: i.MX: improve regulator handling
Date: Tue, 20 Oct 2020 16:28:06 +0200	[thread overview]
Message-ID: <20201020142806.kmxoy6byavdwe5cv@pengutronix.de> (raw)
In-Reply-To: <20201020140934.GS13710@pengutronix.de>

On 20-10-20 16:09, Sascha Hauer wrote:
> On Tue, Oct 20, 2020 at 03:33:17PM +0200, Marco Felsch wrote:
> > Hi Uwe,
> > 
> > On 20-10-20 13:15, Uwe Kleine-König wrote:
> > > Instead of just ignoring errors related to regulator getting error out.
> > > In case there is no regulator in the device tree, regulator_get() returns
> > > the dummy regulator and not an error code, so the change is right for
> > > this situation, too.
> > > 
> > > Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
> > > ---
> > >  drivers/usb/imx/chipidea-imx.c | 7 +++++--
> > >  1 file changed, 5 insertions(+), 2 deletions(-)
> > > 
> > > diff --git a/drivers/usb/imx/chipidea-imx.c b/drivers/usb/imx/chipidea-imx.c
> > > index 786beede6d89..dd0e3c1a2a58 100644
> > > --- a/drivers/usb/imx/chipidea-imx.c
> > > +++ b/drivers/usb/imx/chipidea-imx.c
> > > @@ -267,8 +267,11 @@ static int imx_chipidea_probe(struct device_d *dev)
> > >  	}
> > >  
> > >  	ci->vbus = regulator_get(dev, "vbus");
> > > -	if (IS_ERR(ci->vbus))
> > > -		ci->vbus = NULL;
> > > +	if (IS_ERR(ci->vbus)) {
> > > +		ret = ERR_PTR(ci->vbus);
> > > +		dev_err(dev, "Cannot get vbus regulator: %s\n", strerror(-ret));
> > > +		return ret;
> > 
> > Returning the error here can cause problems with exisiting boards, e.g.
> > if the regulator support is missing for the specified vbus regulator.
> > This is often the case since we have very limited regulator support for
> > now.
> 
> But when there is a regulator we also have to control it, right?

So you need to add each regulator driver or worst case you need to add
PMIC drivers. If I remember correctly, I added the same for mci which
broke a lot of boards. Later you reverted those commit. Now Oleksij
added the regulator support for the fec driver and people are starting 
to remove the phy-supply handle from the barebox-dt's (commit 84cf5cfa9a
("ARM: dts: imx6qdl: pfla02: Remove fec phy-supply")). I'm not again
this patch, just wanted to show the consequences of it.

Regards,
  Marco

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox

  reply	other threads:[~2020-10-20 14:28 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-20 11:15 Uwe Kleine-König
2020-10-20 13:33 ` Marco Felsch
2020-10-20 14:09   ` Sascha Hauer
2020-10-20 14:28     ` Marco Felsch [this message]
2020-10-20 14:58       ` Marco Felsch
2020-10-21  5:49         ` Uwe Kleine-König
2020-10-21  6:07           ` Sascha Hauer
2020-10-21 14:29           ` Marco Felsch
2020-10-21 15:28             ` Marco Felsch
2020-10-21 19:05               ` Uwe Kleine-König
2020-10-21 10:05 ` Sascha Hauer
2020-10-21 12:03   ` Uwe Kleine-König
2020-10-21 12:31     ` Sascha Hauer

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201020142806.kmxoy6byavdwe5cv@pengutronix.de \
    --to=m.felsch@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=s.hauer@pengutronix.de \
    --cc=u.kleine-koenig@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox