From: Sascha Hauer <sha@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: barebox-2020.12.0
Date: Fri, 11 Dec 2020 11:38:17 +0100 [thread overview]
Message-ID: <20201211103817.GY3977@pengutronix.de> (raw)
Hi All,
I am happy to announce that I just released barebox-2020.12.0.
The biggest change this time is the update of the NAND layer to
Linux-5.9. With that we now have a chance to update the NAND drivers to
newer versions as well.
Otherwise we have the usual flow of smaller patches, see below for a
shortlog.
Have fun!
Sascha
----------------------------------------------------------------
Ahmad Fatoum (15):
doc: at91: delete done TODOs
ARM: at91: define new at91_multi_defconfig
kbuild: force compiler to assume two's complement
Revert "common: ubsan: ignore shifting one into sign bit"
commands: bootchooser: migrate menu entry to boot menu
x86: configs: efi: enable some more useful options
mci: stm32_sdmmc2: add support for SDMMC v2.0 as well
nv: fix use-after-free when clearing from shell
mtd: nand-imx: fix passing pointer of wrong type on NAND_CMD_READOOB
doc: add note about characters like hyphens in variable names
Documentation: state: clarify how to access state device parameters
usb: gadget: fastboot: fix no longer accurate help text
doc: bcm283x: fix mix up regarding SoC on raspberry pi zero
usbgadget: autostart: don't print error on repeated nv.usbgadget.autostart=1
sandbox: retire CONFIG_LINUX symbol in favor of CONFIG_SANDBOX
Alexander Shiyan (3):
ARM: CCMX51: Add new module ID variant
ARM: dts: imx6qdl: pfla02: Remove eeprom node
i2c_probe: Use "read_byte" command for probing
Du Huanpeng (2):
MIPS: ls1b: enable pbl support for ls1bdev board
MIPS: dtb: remove unused variable ``root''
Lucas Stach (3):
ddr: imx8m: correct the pwrctl setting of selfref_en
ddr: imx8m: clean up entry points
ddr: imx8m: add workaround for DDRPHY rank to rank issue
Michael Tretter (5):
net: macb: reduce DEBUG output to make it more useful
net: macb: adjust clk_tx rate for link speed changes
net: macb: fix compiler warning for 64 bit systems
ARM: mmu64: allow to disable null pointer trap on zero page
uimage: disable zero page when loading to SDRAM at address 0x0
Peter Mamonov (1):
commands: import memtester 4.3.0 from Debian GNU/Linux
Robin van der Gracht (1):
nvmem: ocotp: fix fusing on fsl,imx6q-ocotp compatible boards
Roland Hieber (2):
sandbox: remove MXS tools from hosttools_defconfig
mxs: always build mxsimage and mxsboot tools
Rouven Czerwinski (1):
of: base: ignore disabled memory nodes
Sascha Hauer (52):
ARM: at91sam9263ek: Update NAND partitioning
ARM: at91sam9x5ek: Update NAND partitioning
ARM: at91: remove at91sam9263ek_defconfig
ARM: at91: remove at91sam9x5ek_defconfig
mtd: Drop asynchronous erase support
mtd: nand: remove unused header file
mtd: nand: drop unused erase_cmd hook
mtd: nand: drop unused errstat hook
mtd: nand: Pass struct nand_chip around
mtd: Add underscore prefix to mtd hooks
mtd: Use classdev->parent
dts: update to v5.10-rc1
dts: update to v5.10-rc2
dts: update to v5.10-rc3
mtd: rename class_dev to dev
mtd: rename master to parent
lib: Add match_string()
mtd: nand: move function hooks to struct nand_legacy
mtd: Add ecc_step_size
mtd: nand: omap_gpmc: Drop unused variable
mtd: nand: omap_gpmc: Fix wrong length check
mtd: nand: omap_gpmc: Add missing bch16 string
mtd: nand: denali: Drop multichip support
mtd: nand: marvell: Use nand_to_mtd()
mtd: nand: gpmi: Use nand_to_mtd()
mtd: nand: orion: Use nand_to_mtd()
mtd: nand: Update to Linux-5.9
mtd: nand: denali: Update to Linux-5.9
mtd: nand: atmel: Return number of bitflips
mtd: nand: atmel: drop dead code
mtd: nand: atmel: Fix pmecc ecc settings
nand command: Print OOB information
nand command: Allow offsets with [kM] suffixes
Merge branch 'for-next/at91'
Merge branch 'for-next/dts'
Merge branch 'for-next/imd-checksum'
Merge branch 'for-next/imx'
Merge branch 'for-next/mips'
Merge branch 'for-next/misc'
Merge branch 'for-next/mtd-nand'
Merge branch 'for-next/sandbox'
mtd: nand: Fix dependeny on CONFIG_NAND_BBT
ARM: layerscape: ppa: Fix use after free
ARM: nxp i.MX8MP evk: make locally used data static
ARM: i.MX: esdctl: Add missing compatible
common/Makefile: Fix dependency
ubifs: remove wrong assertion
mtd: nand: Allow non page aligned length writes
nand: omap: Fix BCH16 read
mtd: nand: Make write support optional
ARM: am335x: Use xz compression for MLO
Release v2020.12.0
Ulrich Ölmann (3):
bootstrap_read_devfs(): optionally inform the caller of the buffer size
bootstrap_read_disk(): optionally inform the caller of the buffer size
ARM: socfpga: xload: evaluate integrity of second stage barebox images
Uwe Kleine-König (7):
mfd: mc34704: fix register reading
mtd: nand-imx: repair reading the oob area
ARM: dts: imx6qdl: pfla02: document motivation for dropping supply
net: Replace license and copyright boilerplate by SPDX identfiers
imx: Fix copyright claim
arm: imx: Convert mach headers to SPDX
nfs: check return value of various rpc calls
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
reply other threads:[~2020-12-11 10:38 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20201211103817.GY3977@pengutronix.de \
--to=sha@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox