From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 04/12] drivers: add fpga bridge framework
Date: Wed, 27 Jan 2021 14:44:15 +0100 [thread overview]
Message-ID: <20210127134423.31587-4-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20210127134423.31587-1-s.trumtrar@pengutronix.de>
Import the fpga bridge framework from linux v4.10-rc2.
Description from the initial commit adding this to linux:
21aeda950c5f84a8351b862816d832120b217a9b
fpga: add fpga bridge framework
This framework adds API functions for enabling/
disabling FPGA bridges under kernel control.
This allows the Linux kernel to disable FPGA bridges
during FPGA reprogramming and to enable FPGA bridges
when FPGA reprogramming is done. This framework is
be manufacturer-agnostic, allowing it to be used in
interfaces that use the FPGA Manager Framework to
reprogram FPGA's.
The functions are:
* of_fpga_bridge_get
* fpga_bridge_put
Get/put an exclusive reference to a FPGA bridge.
* fpga_bridge_enable
* fpga_bridge_disable
Enable/Disable traffic through a bridge.
* fpga_bridge_register
* fpga_bridge_unregister
Register/unregister a device-specific low level FPGA
Bridge driver.
Get an exclusive reference to a bridge and add it to a list:
* fpga_bridge_get_to_list
To enable/disable/put a set of bridges that are on a list:
* fpga_bridges_enable
* fpga_bridges_disable
* fpga_bridges_put
Signed-off-by: Alan Tull <atull@opensource.altera.com>
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/Kconfig | 1 +
drivers/Makefile | 1 +
drivers/fpga/Kconfig | 22 ++++
drivers/fpga/Makefile | 6 +
drivers/fpga/fpga-bridge.c | 226 +++++++++++++++++++++++++++++++++++++
include/fpga-bridge.h | 69 +++++++++++
6 files changed, 325 insertions(+)
create mode 100644 drivers/fpga/Kconfig
create mode 100644 drivers/fpga/Makefile
create mode 100644 drivers/fpga/fpga-bridge.c
create mode 100644 include/fpga-bridge.h
diff --git a/drivers/Kconfig b/drivers/Kconfig
index dda240578067..3bb9c09536e8 100644
--- a/drivers/Kconfig
+++ b/drivers/Kconfig
@@ -36,6 +36,7 @@ source "drivers/reset/Kconfig"
source "drivers/pci/Kconfig"
source "drivers/rtc/Kconfig"
source "drivers/firmware/Kconfig"
+source "drivers/fpga/Kconfig"
source "drivers/phy/Kconfig"
source "drivers/crypto/Kconfig"
source "drivers/memory/Kconfig"
diff --git a/drivers/Makefile b/drivers/Makefile
index 5a03bdceab81..5221c2ca5586 100644
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_RESET_CONTROLLER) += reset/
obj-$(CONFIG_PCI) += pci/
obj-y += rtc/
obj-$(CONFIG_FIRMWARE) += firmware/
+obj-$(CONFIG_FPGA) += fpga/
obj-$(CONFIG_GENERIC_PHY) += phy/
obj-$(CONFIG_HAB) += hab/
obj-$(CONFIG_CRYPTO_HW) += crypto/
diff --git a/drivers/fpga/Kconfig b/drivers/fpga/Kconfig
new file mode 100644
index 000000000000..fccdbff6eb3f
--- /dev/null
+++ b/drivers/fpga/Kconfig
@@ -0,0 +1,22 @@
+#
+# FPGA framework configuration
+#
+
+menu "FPGA Configuration Support"
+
+config FPGA
+ tristate "FPGA Configuration Framework"
+ help
+ Say Y here if you want support for configuring FPGAs from barebox.
+
+if FPGA
+
+config FPGA_BRIDGE
+ tristate "FPGA Bridge Framework"
+ help
+ Say Y here if you want to support bridges connected between host
+ processors and FPGAs or between FPGAs.
+
+endif # FPGA
+
+endmenu
diff --git a/drivers/fpga/Makefile b/drivers/fpga/Makefile
new file mode 100644
index 000000000000..fc71a29d3b33
--- /dev/null
+++ b/drivers/fpga/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the fpga framework and fpga manager drivers.
+#
+
+# FPGA Bridge Drivers
+obj-$(CONFIG_FPGA_BRIDGE) += fpga-bridge.o
diff --git a/drivers/fpga/fpga-bridge.c b/drivers/fpga/fpga-bridge.c
new file mode 100644
index 000000000000..edf29b0ecf13
--- /dev/null
+++ b/drivers/fpga/fpga-bridge.c
@@ -0,0 +1,226 @@
+/*
+ * FPGA Bridge Framework Driver
+ *
+ * Copyright (C) 2013-2016 Altera Corporation, All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#include <common.h>
+#include <fpga-bridge.h>
+
+/**
+ * fpga_bridge_enable - Enable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_enable(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "enable\n");
+
+ if (bridge->br_ops && bridge->br_ops->enable_set)
+ return bridge->br_ops->enable_set(bridge, 1);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_enable);
+
+/**
+ * fpga_bridge_disable - Disable transactions on the bridge
+ *
+ * @bridge: FPGA bridge
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_disable(struct fpga_bridge *bridge)
+{
+ dev_dbg(&bridge->dev, "disable\n");
+
+ if (bridge->br_ops && bridge->br_ops->enable_set)
+ return bridge->br_ops->enable_set(bridge, 0);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_disable);
+
+/**
+ * of_fpga_bridge_get - get an exclusive reference to a fpga bridge
+ *
+ * @np: node pointer of a FPGA bridge
+ *
+ * Return fpga_bridge struct if successful.
+ * Return -EBUSY if someone already has a reference to the bridge.
+ * Return -ENODEV if @np is not a FPGA Bridge.
+ */
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *np)
+
+{
+ struct device_d *dev;
+ struct fpga_bridge *bridge;
+ int ret = -ENODEV;
+
+ dev = of_find_device_by_node(np);
+ if (!dev || !dev->priv)
+ return ERR_PTR(ret);
+
+ bridge = dev->priv;
+
+ return bridge;
+}
+EXPORT_SYMBOL_GPL(of_fpga_bridge_get);
+
+/**
+ * fpga_bridges_enable - enable bridges in a list
+ * @bridge_list: list of FPGA bridges
+ *
+ * Enable each bridge in the list. If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_enable(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ int ret;
+
+ list_for_each_entry(bridge, bridge_list, node) {
+ ret = fpga_bridge_enable(bridge);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_enable);
+
+/**
+ * fpga_bridges_disable - disable bridges in a list
+ *
+ * @bridge_list: list of FPGA bridges
+ *
+ * Disable each bridge in the list. If list is empty, do nothing.
+ *
+ * Return 0 for success or empty bridge list; return error code otherwise.
+ */
+int fpga_bridges_disable(struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+ int ret;
+
+ list_for_each_entry(bridge, bridge_list, node) {
+ ret = fpga_bridge_disable(bridge);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridges_disable);
+
+/**
+ * fpga_bridges_get_to_list - get a bridge, add it to a list
+ *
+ * @np: node pointer of a FPGA bridge
+ * @bridge_list: list of FPGA bridges
+ *
+ * Get an exclusive reference to the bridge and and it to the list.
+ *
+ * Return 0 for success, error code from of_fpga_bridge_get() othewise.
+ */
+int fpga_bridge_get_to_list(struct device_node *np,
+ struct list_head *bridge_list)
+{
+ struct fpga_bridge *bridge;
+
+ bridge = of_fpga_bridge_get(np);
+ if (IS_ERR(bridge))
+ return PTR_ERR(bridge);
+ list_add(&bridge->node, bridge_list);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_get_to_list);
+
+static int set_enable(struct param_d *p, void *priv)
+{
+ struct fpga_bridge *bridge = priv;
+
+ if (bridge->enable)
+ fpga_bridge_enable(bridge);
+ else
+ fpga_bridge_disable(bridge);
+
+ return 0;
+}
+
+/**
+ * fpga_bridge_register - register a fpga bridge driver
+ * @dev: FPGA bridge device from pdev
+ * @name: FPGA bridge name
+ * @br_ops: pointer to structure of fpga bridge ops
+ * @priv: FPGA bridge private data
+ *
+ * Return: 0 for success, error code otherwise.
+ */
+int fpga_bridge_register(struct device_d *dev, const char *name,
+ const struct fpga_bridge_ops *br_ops, void *priv)
+{
+ struct fpga_bridge *bridge;
+ struct param_d *p;
+ int ret = 0;
+
+ if (!name || !strlen(name)) {
+ dev_err(dev, "Attempt to register with no name!\n");
+ return -EINVAL;
+ }
+
+ bridge = xzalloc(sizeof(*bridge));
+ if (!bridge)
+ return -ENOMEM;
+
+ INIT_LIST_HEAD(&bridge->node);
+
+ bridge->br_ops = br_ops;
+ bridge->priv = priv;
+
+ bridge->dev.parent = dev;
+ bridge->dev.device_node = dev->device_node;
+ bridge->dev.id = DEVICE_ID_DYNAMIC;
+
+ bridge->dev.name = xstrdup(name);
+
+ ret = register_device(&bridge->dev);
+ if (ret)
+ goto out;
+
+ dev->priv = bridge;
+
+ bridge->enable = 0;
+ p = dev_add_param_bool(&bridge->dev, "enable", set_enable,
+ NULL, &bridge->enable, bridge);
+ if (IS_ERR(p))
+ return PTR_ERR(p);
+
+ of_platform_populate(dev->device_node, NULL, dev);
+
+ dev_info(bridge->dev.parent, "fpga bridge [%s] registered\n",
+ bridge->dev.name);
+
+ return 0;
+
+out:
+ kfree(bridge);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(fpga_bridge_register);
diff --git a/include/fpga-bridge.h b/include/fpga-bridge.h
new file mode 100644
index 000000000000..8d55043a7738
--- /dev/null
+++ b/include/fpga-bridge.h
@@ -0,0 +1,69 @@
+#include <common.h>
+
+#ifndef _LINUX_FPGA_BRIDGE_H
+#define _LINUX_FPGA_BRIDGE_H
+
+struct fpga_bridge;
+
+/**
+ * struct fpga_bridge_ops - ops for low level FPGA bridge drivers
+ * @enable_show: returns the FPGA bridge's status
+ * @enable_set: set a FPGA bridge as enabled or disabled
+ * @fpga_bridge_remove: set FPGA into a specific state during driver remove
+ */
+struct fpga_bridge_ops {
+ int (*enable_show)(struct fpga_bridge *bridge);
+ int (*enable_set)(struct fpga_bridge *bridge, bool enable);
+ void (*fpga_bridge_remove)(struct fpga_bridge *bridge);
+};
+
+/**
+ * struct fpga_bridge - FPGA bridge structure
+ * @name: name of low level FPGA bridge
+ * @dev: FPGA bridge device
+ * @mutex: enforces exclusive reference to bridge
+ * @br_ops: pointer to struct of FPGA bridge ops
+ * @info: fpga image specific information
+ * @node: FPGA bridge list node
+ * @priv: low level driver private date
+ */
+struct fpga_bridge {
+ struct device_d dev;
+ const struct fpga_bridge_ops *br_ops;
+ struct list_head node;
+ unsigned int enable;
+ void *priv;
+};
+
+#define to_fpga_bridge(d) container_of(d, struct fpga_bridge, dev)
+
+struct fpga_bridge *of_fpga_bridge_get(struct device_node *node);
+void fpga_bridge_put(struct fpga_bridge *bridge);
+int fpga_bridge_enable(struct fpga_bridge *bridge);
+int fpga_bridge_disable(struct fpga_bridge *bridge);
+
+#ifdef CONFIG_FPGA_BRIDGE
+int fpga_bridges_enable(struct list_head *bridge_list);
+int fpga_bridges_disable(struct list_head *bridge_list);
+int fpga_bridge_get_to_list(struct device_node *np,
+ struct list_head *bridge_list);
+#else
+static inline int fpga_bridges_enable(struct list_head *bridge_list)
+{
+ return -ENOSYS;
+};
+static inline int fpga_bridges_disable(struct list_head *bridge_list)
+{
+ return -ENOSYS;
+};
+static inline int fpga_bridge_get_to_list(struct device_node *np,
+ struct list_head *bridge_list)
+{
+ return -ENOSYS;
+};
+#endif
+
+int fpga_bridge_register(struct device_d *dev, const char *name,
+ const struct fpga_bridge_ops *br_ops, void *priv);
+
+#endif /* _LINUX_FPGA_BRIDGE_H */
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-01-27 13:48 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-27 13:44 [PATCH v2 01/12] ARM: mmu: inherit pte flags from pmd Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 02/12] firmware: socfpga: set APPLYCFG after loading bitstream Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 03/12] reset: add of_reset_control_get to header Steffen Trumtrar
2021-01-27 13:44 ` Steffen Trumtrar [this message]
2021-01-27 13:44 ` [PATCH v2 05/12] drivers: fpga: add socfpga bridges Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 06/12] firmware: socfpga: change function prefixes Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 07/12] firmware: import fpga-mgr.h from linux Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 08/12] of: kconfig: of_overlay uses firmwaremgr_load_file Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 09/12] of: of_firmware: add support for fpga bridges Steffen Trumtrar
2021-01-28 15:10 ` Sascha Hauer
2021-01-27 13:44 ` [PATCH v2 10/12] commands: firmwareload: allow loading firmware from dt Steffen Trumtrar
2021-01-28 15:16 ` Sascha Hauer
2021-01-27 13:44 ` [PATCH v2 11/12] drivers: firmware: socfpga: remove bridges shutdown Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 12/12] firmware: add support for compressed images Steffen Trumtrar
2021-01-28 15:27 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210127134423.31587-4-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox