From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: barebox@lists.infradead.org
Subject: [PATCH v2 07/12] firmware: import fpga-mgr.h from linux
Date: Wed, 27 Jan 2021 14:44:18 +0100 [thread overview]
Message-ID: <20210127134423.31587-7-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20210127134423.31587-1-s.trumtrar@pengutronix.de>
Instead of defining the fpga-mgr structure in the socfpga driver, import
the fpga-mgr.h file from linux v4.13.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
drivers/firmware/socfpga.c | 9 +---
include/firmware.h | 1 +
include/fpga-mgr.h | 102 +++++++++++++++++++++++++++++++++++++
3 files changed, 104 insertions(+), 8 deletions(-)
create mode 100644 include/fpga-mgr.h
diff --git a/drivers/firmware/socfpga.c b/drivers/firmware/socfpga.c
index 14875214b1aa..605c931604c9 100644
--- a/drivers/firmware/socfpga.c
+++ b/drivers/firmware/socfpga.c
@@ -27,6 +27,7 @@
*/
#include <firmware.h>
+#include <fpga-mgr.h>
#include <command.h>
#include <common.h>
#include <malloc.h>
@@ -83,14 +84,6 @@
extern void socfpga_sdram_apply_static_cfg(void __iomem *sdrctrlgrp);
extern void socfpga_sdram_apply_static_cfg_end(void *);
-struct fpgamgr {
- struct firmware_handler fh;
- struct device_d dev;
- void __iomem *regs;
- void __iomem *regs_data;
- int programmed;
-};
-
/* Get the FPGA mode */
static uint32_t socfpga_fpgamgr_get_mode(struct fpgamgr *mgr)
{
diff --git a/include/firmware.h b/include/firmware.h
index 19777d9bf711..2fef97a48f56 100644
--- a/include/firmware.h
+++ b/include/firmware.h
@@ -13,6 +13,7 @@ struct firmware_handler {
char *id; /* unique identifier for this firmware device */
char *model; /* description for this device */
struct device_d *dev;
+ void *priv;
/* called once to prepare the firmware's programming cycle */
int (*open)(struct firmware_handler*);
/* called multiple times to program the firmware with the given data */
diff --git a/include/fpga-mgr.h b/include/fpga-mgr.h
new file mode 100644
index 000000000000..a120b3918990
--- /dev/null
+++ b/include/fpga-mgr.h
@@ -0,0 +1,102 @@
+/*
+ * FPGA Framework
+ *
+ * Copyright (C) 2013-2015 Altera Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+#ifndef _LINUX_FPGA_MGR_H
+#define _LINUX_FPGA_MGR_H
+
+#include <firmware.h>
+
+struct fpga_manager;
+
+/**
+ * enum fpga_mgr_states - fpga framework states
+ * @FPGA_MGR_STATE_UNKNOWN: can't determine state
+ * @FPGA_MGR_STATE_POWER_OFF: FPGA power is off
+ * @FPGA_MGR_STATE_POWER_UP: FPGA reports power is up
+ * @FPGA_MGR_STATE_RESET: FPGA in reset state
+ * @FPGA_MGR_STATE_FIRMWARE_REQ: firmware request in progress
+ * @FPGA_MGR_STATE_FIRMWARE_REQ_ERR: firmware request failed
+ * @FPGA_MGR_STATE_WRITE_INIT: preparing FPGA for programming
+ * @FPGA_MGR_STATE_WRITE_INIT_ERR: Error during WRITE_INIT stage
+ * @FPGA_MGR_STATE_WRITE: writing image to FPGA
+ * @FPGA_MGR_STATE_WRITE_ERR: Error while writing FPGA
+ * @FPGA_MGR_STATE_WRITE_COMPLETE: Doing post programming steps
+ * @FPGA_MGR_STATE_WRITE_COMPLETE_ERR: Error during WRITE_COMPLETE
+ * @FPGA_MGR_STATE_OPERATING: FPGA is programmed and operating
+ */
+enum fpga_mgr_states {
+ /* default FPGA states */
+ FPGA_MGR_STATE_UNKNOWN,
+ FPGA_MGR_STATE_POWER_OFF,
+ FPGA_MGR_STATE_POWER_UP,
+ FPGA_MGR_STATE_RESET,
+
+ /* getting an image for loading */
+ FPGA_MGR_STATE_FIRMWARE_REQ,
+ FPGA_MGR_STATE_FIRMWARE_REQ_ERR,
+
+ /* write sequence: init, write, complete */
+ FPGA_MGR_STATE_WRITE_INIT,
+ FPGA_MGR_STATE_WRITE_INIT_ERR,
+ FPGA_MGR_STATE_WRITE,
+ FPGA_MGR_STATE_WRITE_ERR,
+ FPGA_MGR_STATE_WRITE_COMPLETE,
+ FPGA_MGR_STATE_WRITE_COMPLETE_ERR,
+
+ /* fpga is programmed and operating */
+ FPGA_MGR_STATE_OPERATING,
+};
+
+/*
+ * FPGA Manager flags
+ * FPGA_MGR_PARTIAL_RECONFIG: do partial reconfiguration if supported
+ * FPGA_MGR_EXTERNAL_CONFIG: FPGA has been configured prior to Linux booting
+ * FPGA_MGR_BITSTREAM_LSB_FIRST: SPI bitstream bit order is LSB first
+ * FPGA_MGR_COMPRESSED_BITSTREAM: FPGA bitstream is compressed
+ */
+#define FPGA_MGR_PARTIAL_RECONFIG BIT(0)
+#define FPGA_MGR_EXTERNAL_CONFIG BIT(1)
+#define FPGA_MGR_ENCRYPTED_BITSTREAM BIT(2)
+#define FPGA_MGR_BITSTREAM_LSB_FIRST BIT(3)
+#define FPGA_MGR_COMPRESSED_BITSTREAM BIT(4)
+
+/**
+ * struct fpga_image_info - information specific to a FPGA image
+ * @flags: boolean flags as defined above
+ * @enable_timeout_us: maximum time to enable traffic through bridge (uSec)
+ * @disable_timeout_us: maximum time to disable traffic through bridge (uSec)
+ * @config_complete_timeout_us: maximum time for FPGA to switch to operating
+ * status in the write_complete op.
+ */
+struct fpga_image_info {
+ u32 flags;
+ u32 enable_timeout_us;
+ u32 disable_timeout_us;
+ u32 config_complete_timeout_us;
+};
+
+struct fpgamgr {
+ struct firmware_handler fh;
+ struct device_d dev;
+ void *priv;
+ void __iomem *regs;
+ void __iomem *regs_data;
+ int programmed;
+};
+
+
+#endif /*_LINUX_FPGA_MGR_H */
--
2.20.1
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-01-27 14:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-01-27 13:44 [PATCH v2 01/12] ARM: mmu: inherit pte flags from pmd Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 02/12] firmware: socfpga: set APPLYCFG after loading bitstream Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 03/12] reset: add of_reset_control_get to header Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 04/12] drivers: add fpga bridge framework Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 05/12] drivers: fpga: add socfpga bridges Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 06/12] firmware: socfpga: change function prefixes Steffen Trumtrar
2021-01-27 13:44 ` Steffen Trumtrar [this message]
2021-01-27 13:44 ` [PATCH v2 08/12] of: kconfig: of_overlay uses firmwaremgr_load_file Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 09/12] of: of_firmware: add support for fpga bridges Steffen Trumtrar
2021-01-28 15:10 ` Sascha Hauer
2021-01-27 13:44 ` [PATCH v2 10/12] commands: firmwareload: allow loading firmware from dt Steffen Trumtrar
2021-01-28 15:16 ` Sascha Hauer
2021-01-27 13:44 ` [PATCH v2 11/12] drivers: firmware: socfpga: remove bridges shutdown Steffen Trumtrar
2021-01-27 13:44 ` [PATCH v2 12/12] firmware: add support for compressed images Steffen Trumtrar
2021-01-28 15:27 ` Sascha Hauer
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210127134423.31587-7-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox