From: Ahmad Fatoum <a.fatoum@pengutronix.de>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>, rcz@pengutronix.de
Subject: [PATCH 12/20] RISC-V: import Linux' optimized string functions
Date: Sun, 14 Mar 2021 13:27:56 +0100 [thread overview]
Message-ID: <20210314122804.4128-13-a.fatoum@pengutronix.de> (raw)
In-Reply-To: <20210314122804.4128-1-a.fatoum@pengutronix.de>
For non-NMON enabled board the RISC-V specific settings menu will be
empty. Improve UI/UX by adding something there.
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
---
arch/riscv/Kconfig | 7 ++
arch/riscv/include/asm/string.h | 21 +++++-
arch/riscv/lib/Makefile | 1 +
arch/riscv/lib/memcpy.S | 108 ++++++++++++++++++++++++++++++
arch/riscv/lib/memmove.S | 64 ++++++++++++++++++
arch/riscv/lib/memset.S | 113 ++++++++++++++++++++++++++++++++
6 files changed, 313 insertions(+), 1 deletion(-)
create mode 100644 arch/riscv/lib/memcpy.S
create mode 100644 arch/riscv/lib/memmove.S
create mode 100644 arch/riscv/lib/memset.S
diff --git a/arch/riscv/Kconfig b/arch/riscv/Kconfig
index a7f362d8e80c..b1b24f2e5764 100644
--- a/arch/riscv/Kconfig
+++ b/arch/riscv/Kconfig
@@ -70,6 +70,13 @@ endmenu
menu "RISC-V specific settings"
+config RISCV_OPTIMZED_STRING_FUNCTIONS
+ bool "use assembler optimized string functions"
+ help
+ Say yes here to use assembler optimized memcpy / memset functions.
+ These functions work faster than the normal versions but increase
+ your binary size.
+
config HAS_NMON
bool
diff --git a/arch/riscv/include/asm/string.h b/arch/riscv/include/asm/string.h
index 2997587d820c..1e920c8688ce 100644
--- a/arch/riscv/include/asm/string.h
+++ b/arch/riscv/include/asm/string.h
@@ -1 +1,20 @@
-/* dummy */
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __ASM_RISCV_STRING_H
+#define __ASM_RISCV_STRING_H
+
+#ifdef CONFIG_RISCV_OPTIMZED_STRING_FUNCTIONS
+
+#define __HAVE_ARCH_MEMCPY
+extern void *memcpy(void *, const void *, __kernel_size_t);
+#define __HAVE_ARCH_MEMSET
+extern void *memset(void *, int, __kernel_size_t);
+#define __HAVE_ARCH_MEMMOVE
+extern void *memmove(void *, const void *, __kernel_size_t);
+
+#endif
+
+extern void *__memcpy(void *, const void *, __kernel_size_t);
+extern void *__memset(void *, int, __kernel_size_t);
+extern void *__memmove(void *, const void *, __kernel_size_t);
+
+#endif
diff --git a/arch/riscv/lib/Makefile b/arch/riscv/lib/Makefile
index 7fe57b0b554c..b983ca8cdca0 100644
--- a/arch/riscv/lib/Makefile
+++ b/arch/riscv/lib/Makefile
@@ -2,3 +2,4 @@ extra-y += barebox.lds
obj-y += riscv_timer.o
obj-$(CONFIG_HAS_ARCH_SJLJ) += setjmp.o longjmp.o
+obj-$(CONFIG_RISCV_OPTIMZED_STRING_FUNCTIONS) += memcpy.o memset.o memmove.o
diff --git a/arch/riscv/lib/memcpy.S b/arch/riscv/lib/memcpy.S
new file mode 100644
index 000000000000..51ab716253fa
--- /dev/null
+++ b/arch/riscv/lib/memcpy.S
@@ -0,0 +1,108 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Regents of the University of California
+ */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+/* void *memcpy(void *, const void *, size_t) */
+ENTRY(__memcpy)
+WEAK(memcpy)
+ move t6, a0 /* Preserve return value */
+
+ /* Defer to byte-oriented copy for small sizes */
+ sltiu a3, a2, 128
+ bnez a3, 4f
+ /* Use word-oriented copy only if low-order bits match */
+ andi a3, t6, SZREG-1
+ andi a4, a1, SZREG-1
+ bne a3, a4, 4f
+
+ beqz a3, 2f /* Skip if already aligned */
+ /*
+ * Round to nearest double word-aligned address
+ * greater than or equal to start address
+ */
+ andi a3, a1, ~(SZREG-1)
+ addi a3, a3, SZREG
+ /* Handle initial misalignment */
+ sub a4, a3, a1
+1:
+ lb a5, 0(a1)
+ addi a1, a1, 1
+ sb a5, 0(t6)
+ addi t6, t6, 1
+ bltu a1, a3, 1b
+ sub a2, a2, a4 /* Update count */
+
+2:
+ andi a4, a2, ~((16*SZREG)-1)
+ beqz a4, 4f
+ add a3, a1, a4
+3:
+ REG_L a4, 0(a1)
+ REG_L a5, SZREG(a1)
+ REG_L a6, 2*SZREG(a1)
+ REG_L a7, 3*SZREG(a1)
+ REG_L t0, 4*SZREG(a1)
+ REG_L t1, 5*SZREG(a1)
+ REG_L t2, 6*SZREG(a1)
+ REG_L t3, 7*SZREG(a1)
+ REG_L t4, 8*SZREG(a1)
+ REG_L t5, 9*SZREG(a1)
+ REG_S a4, 0(t6)
+ REG_S a5, SZREG(t6)
+ REG_S a6, 2*SZREG(t6)
+ REG_S a7, 3*SZREG(t6)
+ REG_S t0, 4*SZREG(t6)
+ REG_S t1, 5*SZREG(t6)
+ REG_S t2, 6*SZREG(t6)
+ REG_S t3, 7*SZREG(t6)
+ REG_S t4, 8*SZREG(t6)
+ REG_S t5, 9*SZREG(t6)
+ REG_L a4, 10*SZREG(a1)
+ REG_L a5, 11*SZREG(a1)
+ REG_L a6, 12*SZREG(a1)
+ REG_L a7, 13*SZREG(a1)
+ REG_L t0, 14*SZREG(a1)
+ REG_L t1, 15*SZREG(a1)
+ addi a1, a1, 16*SZREG
+ REG_S a4, 10*SZREG(t6)
+ REG_S a5, 11*SZREG(t6)
+ REG_S a6, 12*SZREG(t6)
+ REG_S a7, 13*SZREG(t6)
+ REG_S t0, 14*SZREG(t6)
+ REG_S t1, 15*SZREG(t6)
+ addi t6, t6, 16*SZREG
+ bltu a1, a3, 3b
+ andi a2, a2, (16*SZREG)-1 /* Update count */
+
+4:
+ /* Handle trailing misalignment */
+ beqz a2, 6f
+ add a3, a1, a2
+
+ /* Use word-oriented copy if co-aligned to word boundary */
+ or a5, a1, t6
+ or a5, a5, a3
+ andi a5, a5, 3
+ bnez a5, 5f
+7:
+ lw a4, 0(a1)
+ addi a1, a1, 4
+ sw a4, 0(t6)
+ addi t6, t6, 4
+ bltu a1, a3, 7b
+
+ ret
+
+5:
+ lb a4, 0(a1)
+ addi a1, a1, 1
+ sb a4, 0(t6)
+ addi t6, t6, 1
+ bltu a1, a3, 5b
+6:
+ ret
+END(__memcpy)
diff --git a/arch/riscv/lib/memmove.S b/arch/riscv/lib/memmove.S
new file mode 100644
index 000000000000..07d1d2152ba5
--- /dev/null
+++ b/arch/riscv/lib/memmove.S
@@ -0,0 +1,64 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+ENTRY(__memmove)
+WEAK(memmove)
+ move t0, a0
+ move t1, a1
+
+ beq a0, a1, exit_memcpy
+ beqz a2, exit_memcpy
+ srli t2, a2, 0x2
+
+ slt t3, a0, a1
+ beqz t3, do_reverse
+
+ andi a2, a2, 0x3
+ li t4, 1
+ beqz t2, byte_copy
+
+word_copy:
+ lw t3, 0(a1)
+ addi t2, t2, -1
+ addi a1, a1, 4
+ sw t3, 0(a0)
+ addi a0, a0, 4
+ bnez t2, word_copy
+ beqz a2, exit_memcpy
+ j byte_copy
+
+do_reverse:
+ add a0, a0, a2
+ add a1, a1, a2
+ andi a2, a2, 0x3
+ li t4, -1
+ beqz t2, reverse_byte_copy
+
+reverse_word_copy:
+ addi a1, a1, -4
+ addi t2, t2, -1
+ lw t3, 0(a1)
+ addi a0, a0, -4
+ sw t3, 0(a0)
+ bnez t2, reverse_word_copy
+ beqz a2, exit_memcpy
+
+reverse_byte_copy:
+ addi a0, a0, -1
+ addi a1, a1, -1
+
+byte_copy:
+ lb t3, 0(a1)
+ addi a2, a2, -1
+ sb t3, 0(a0)
+ add a1, a1, t4
+ add a0, a0, t4
+ bnez a2, byte_copy
+
+exit_memcpy:
+ move a0, t0
+ move a1, t1
+ ret
+END(__memmove)
diff --git a/arch/riscv/lib/memset.S b/arch/riscv/lib/memset.S
new file mode 100644
index 000000000000..34c5360c6705
--- /dev/null
+++ b/arch/riscv/lib/memset.S
@@ -0,0 +1,113 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2013 Regents of the University of California
+ */
+
+
+#include <linux/linkage.h>
+#include <asm/asm.h>
+
+/* void *memset(void *, int, size_t) */
+ENTRY(__memset)
+WEAK(memset)
+ move t0, a0 /* Preserve return value */
+
+ /* Defer to byte-oriented fill for small sizes */
+ sltiu a3, a2, 16
+ bnez a3, 4f
+
+ /*
+ * Round to nearest XLEN-aligned address
+ * greater than or equal to start address
+ */
+ addi a3, t0, SZREG-1
+ andi a3, a3, ~(SZREG-1)
+ beq a3, t0, 2f /* Skip if already aligned */
+ /* Handle initial misalignment */
+ sub a4, a3, t0
+1:
+ sb a1, 0(t0)
+ addi t0, t0, 1
+ bltu t0, a3, 1b
+ sub a2, a2, a4 /* Update count */
+
+2: /* Duff's device with 32 XLEN stores per iteration */
+ /* Broadcast value into all bytes */
+ andi a1, a1, 0xff
+ slli a3, a1, 8
+ or a1, a3, a1
+ slli a3, a1, 16
+ or a1, a3, a1
+#ifdef CONFIG_64BIT
+ slli a3, a1, 32
+ or a1, a3, a1
+#endif
+
+ /* Calculate end address */
+ andi a4, a2, ~(SZREG-1)
+ add a3, t0, a4
+
+ andi a4, a4, 31*SZREG /* Calculate remainder */
+ beqz a4, 3f /* Shortcut if no remainder */
+ neg a4, a4
+ addi a4, a4, 32*SZREG /* Calculate initial offset */
+
+ /* Adjust start address with offset */
+ sub t0, t0, a4
+
+ /* Jump into loop body */
+ /* Assumes 32-bit instruction lengths */
+ la a5, 3f
+#ifdef CONFIG_64BIT
+ srli a4, a4, 1
+#endif
+ add a5, a5, a4
+ jr a5
+3:
+ REG_S a1, 0(t0)
+ REG_S a1, SZREG(t0)
+ REG_S a1, 2*SZREG(t0)
+ REG_S a1, 3*SZREG(t0)
+ REG_S a1, 4*SZREG(t0)
+ REG_S a1, 5*SZREG(t0)
+ REG_S a1, 6*SZREG(t0)
+ REG_S a1, 7*SZREG(t0)
+ REG_S a1, 8*SZREG(t0)
+ REG_S a1, 9*SZREG(t0)
+ REG_S a1, 10*SZREG(t0)
+ REG_S a1, 11*SZREG(t0)
+ REG_S a1, 12*SZREG(t0)
+ REG_S a1, 13*SZREG(t0)
+ REG_S a1, 14*SZREG(t0)
+ REG_S a1, 15*SZREG(t0)
+ REG_S a1, 16*SZREG(t0)
+ REG_S a1, 17*SZREG(t0)
+ REG_S a1, 18*SZREG(t0)
+ REG_S a1, 19*SZREG(t0)
+ REG_S a1, 20*SZREG(t0)
+ REG_S a1, 21*SZREG(t0)
+ REG_S a1, 22*SZREG(t0)
+ REG_S a1, 23*SZREG(t0)
+ REG_S a1, 24*SZREG(t0)
+ REG_S a1, 25*SZREG(t0)
+ REG_S a1, 26*SZREG(t0)
+ REG_S a1, 27*SZREG(t0)
+ REG_S a1, 28*SZREG(t0)
+ REG_S a1, 29*SZREG(t0)
+ REG_S a1, 30*SZREG(t0)
+ REG_S a1, 31*SZREG(t0)
+ addi t0, t0, 32*SZREG
+ bltu t0, a3, 3b
+ andi a2, a2, SZREG-1 /* Update count */
+
+4:
+ /* Handle trailing misalignment */
+ beqz a2, 6f
+ add a3, t0, a2
+5:
+ sb a1, 0(t0)
+ addi t0, t0, 1
+ bltu t0, a3, 5b
+6:
+ ret
+END(__memset)
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-03-14 12:30 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-14 12:27 [PATCH 00/20] RISC-V: rework for PBL, VIRT and 64-Bit support Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 01/20] partitions: don't allocate dma capable memory Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 02/20] images: make BOARD_ARM_GENERIC_DT available for other arches Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 03/20] ARM: rename CONFIG_ARM_USE_COMPRESSED_DTB to CONFIG_USE_COMPRESSED_DTB Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 04/20] ARM: aarch64: ommit unused label in assembly Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 05/20] serial: virtio-console: depend on, but don't select VIRTIO Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 06/20] filetype: detect RISC-V Linux kernel image Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 07/20] asm: unaligned: don't do unaligned accesses Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 08/20] RISC-V: debug_ll: ns16550: align C access size with assembly's Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 09/20] RISC-V: drop duplicate or unneeded cflags Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 10/20] RISC-V: add cacheless HAS_DMA support Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 11/20] RISC-V: erizo: move to arch/riscv/boards/erizo Ahmad Fatoum
2021-03-14 12:27 ` Ahmad Fatoum [this message]
2021-03-14 12:27 ` [PATCH 13/20] RISC-V: implement PBL and relocation support Ahmad Fatoum
2021-03-15 7:43 ` Ahmad Fatoum
2021-03-14 12:27 ` [PATCH 14/20] RISC-V: erizo: migrate to PBL Ahmad Fatoum
2021-03-15 8:43 ` MIPS RELOCATABLE: " Antony Pavlov
2021-03-15 11:45 ` Oleksij Rempel
2021-03-15 12:08 ` Antony Pavlov
2021-03-15 12:40 ` Ahmad Fatoum
2021-03-15 15:37 ` Antony Pavlov
2021-03-15 15:46 ` Ahmad Fatoum
2021-03-15 17:03 ` Oleksij Rempel
2021-03-14 12:27 ` [PATCH 15/20] RISC-V: support symbol names in barebox image Ahmad Fatoum
2021-03-14 12:28 ` [PATCH 16/20] RISC-V: add 64-bit support Ahmad Fatoum
2021-03-14 12:51 ` Rouven Czerwinski
2021-03-14 13:03 ` [PATCH 1/2] fixup! " Ahmad Fatoum
2021-03-14 13:03 ` [PATCH 2/2] " Ahmad Fatoum
2021-03-15 8:38 ` Antony Pavlov
2021-03-14 12:28 ` [PATCH 17/20] RISC-V: add generic DT image Ahmad Fatoum
2021-03-14 12:28 ` [PATCH 18/20] clocksource: add driver for RISC-V CLINT timer Ahmad Fatoum
2021-03-14 12:28 ` [PATCH 19/20] power: reset: add drivers for generic syscon reset and poweroff Ahmad Fatoum
2021-03-14 12:28 ` [PATCH 20/20] RISC-V: add Qemu virt support Ahmad Fatoum
2021-03-14 16:30 ` [PATCH] fixup! " Ahmad Fatoum
2021-03-15 8:22 ` [PATCH 00/20] RISC-V: rework for PBL, VIRT and 64-Bit support Antony Pavlov
2021-03-15 10:30 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210314122804.4128-13-a.fatoum@pengutronix.de \
--to=a.fatoum@pengutronix.de \
--cc=barebox@lists.infradead.org \
--cc=rcz@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox