From: Denis Osterland-Heim <denis.osterland@diehl.com>
To: "barebox@lists.infradead.org" <barebox@lists.infradead.org>
Subject: [PATCH] scripts: imx: add support for additional hab Blocks
Date: Mon, 22 Mar 2021 12:05:35 +0000 [thread overview]
Message-ID: <20210322120222.29957-1-denis.osterland@diehl.com> (raw)
This allows to specifiy additional signed blocks
in the format `offset+size@address` within the imximg.
It is needed by the uuu tool, which loads the image different to
the imx-usb-loader. It loads the DCD always to 0x910000 in the OCRAM.
So this area have to be signed as well.
In my case this needs `hab_blocks 0x42c+0x1f0@0x910000`.
It supports to remove quotes to support Kconfig variable here.
Signed-off-by: Denis Osterland-Heim <denis.osterland@diehl.com>
---
scripts/imx/imx.c | 52 +++++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 50 insertions(+), 2 deletions(-)
diff --git a/scripts/imx/imx.c b/scripts/imx/imx.c
index 6b8dabd04..ce18778f5 100644
--- a/scripts/imx/imx.c
+++ b/scripts/imx/imx.c
@@ -328,6 +328,7 @@ static int do_hab_blocks(struct config_data *data, int argc, char *argv[])
{
char *str;
int ret;
+int i;
uint32_t signed_size = data->load_size;
uint32_t offset = data->image_ivt_offset;
@@ -352,7 +353,7 @@ static int do_hab_blocks(struct config_data *data, int argc, char *argv[])
}
if (signed_size > 0) {
-ret = asprintf(&str, "Blocks = 0x%08x 0x%08x 0x%08x \"%s\"\n",
+ret = asprintf(&str, "Blocks = 0x%08x 0x%08x 0x%08x \"%s\"",
data->image_load_addr + data->image_ivt_offset, offset,
signed_size - data->image_ivt_offset, data->outfile);
} else {
@@ -365,10 +366,57 @@ static int do_hab_blocks(struct config_data *data, int argc, char *argv[])
return -ENOMEM;
ret = hab_add_str(data, str);
+free(str);
if (ret)
return ret;
-return 0;
+for (i = 1; i < argc; i++) {
+uint32_t addr;
+uint32_t off;
+uint32_t size;
+char *b;
+char *e;
+
+b = argv[i];
+if (*b == '"') // remove leading qoute
+b++;
+if (!*b || *b == '"')
+continue; // skip if empty
+
+off = strtoul(b, &e, 0);
+if (*e != '+') {
+fprintf(stderr, "failed to find '+' in '%s'\n", b);
+fprintf(stderr, "format off+size@addr expected, but given: %s\n", argv[i]);
+return -EINVAL;
+}
+
+b = e + 1;
+size = strtoul(b, &e, 0);
+if (*e != '@') {
+fprintf(stderr, "failed to find '@' in '%s'\n", b);
+fprintf(stderr, "format off+size@addr expected, but given: %s\n", argv[i]);
+return -EINVAL;
+}
+
+b = e + 1;
+addr = strtoul(b, &e, 0);
+if (*e && *e != '"') { // ignore trailing qoute
+fprintf(stderr, "unexpected char at the end: '%c'\n", *e);
+fprintf(stderr, "format off+size@addr expected, but given: %s\n", argv[i]);
+return -EINVAL;
+}
+
+ret = asprintf(&str, ", 0x%08x 0x%08x 0x%08x \"%s\"", addr, off, size, data->outfile);
+if (ret < 0)
+return -ENOMEM;
+
+ret = hab_add_str(data, str);
+free(str);
+if (ret)
+return ret;
+}
+
+return hab_add_str(data, "\n");
}
static int do_hab_encrypt(struct config_data *data, int argc, char *argv[])
--
2.31.0
Diehl Connectivity Solutions GmbH
Geschäftsführung: Horst Leonberger
Sitz der Gesellschaft: Nürnberg - Registergericht: Amtsgericht
Nürnberg: HRB 32315
________________________________
Der Inhalt der vorstehenden E-Mail ist nicht rechtlich bindend. Diese E-Mail enthaelt vertrauliche und/oder rechtlich geschuetzte Informationen.
Informieren Sie uns bitte, wenn Sie diese E-Mail faelschlicherweise erhalten haben. Bitte loeschen Sie in diesem Fall die Nachricht.
Jede unerlaubte Form der Reproduktion, Bekanntgabe, Aenderung, Verteilung und/oder Publikation dieser E-Mail ist strengstens untersagt.
- Informationen zum Datenschutz, insbesondere zu Ihren Rechten, erhalten Sie unter:
https://www.diehl.com/group/de/transparenz-und-informationspflichten/
The contents of the above mentioned e-mail is not legally binding. This e-mail contains confidential and/or legally protected information. Please inform us if you have received this e-mail by
mistake and delete it in such a case. Each unauthorized reproduction, disclosure, alteration, distribution and/or publication of this e-mail is strictly prohibited.
- For general information on data protection and your respective rights please visit:
https://www.diehl.com/group/en/transparency-and-information-obligations/
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2021-03-22 12:07 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-03-22 12:05 Denis Osterland-Heim [this message]
2021-03-22 12:06 ` Denis Osterland-Heim
-- strict thread matches above, loose matches on Subject: below --
2021-03-11 17:07 Denis Osterland-Heim
2021-03-22 5:50 ` Sascha Hauer
2021-03-22 6:26 ` Denis Osterland-Heim
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210322120222.29957-1-denis.osterland@diehl.com \
--to=denis.osterland@diehl.com \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox