[PATCH 1/5] gpiolib: add Linux-like gpiod_get() helper

[Ahmad Fatoum <ahmad@a3f.at>]

Many Linux drivers use [devm_]gpiod_get to get appropriately configured
GPIO descriptors out with little code. Make porting such Linux code
easier by providing a semi-compatible gpiod_get function. Main
differences:

 - It returns a gpio index, so it can be passed to any gpio_ function
 - It's device-tree only, so it should only be used from drivers
   that themselves probe from device tree.

Signed-off-by: Ahmad Fatoum <ahmad@a3f.at>
---
 drivers/gpio/gpiolib.c | 43 ++++++++++++++++++++++++++++++++++++++++++
 include/gpiod.h        | 26 +++++++++++++++++++++++++
 2 files changed, 69 insertions(+)
 create mode 100644 include/gpiod.h

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 6088cadd8a18..7b7261d01f24 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -6,6 +6,7 @@
 #include <complete.h>
 #include <gpio.h>
 #include <of_gpio.h>
+#include <gpiod.h>
 #include <errno.h>
 #include <malloc.h>
 
@@ -554,6 +555,48 @@ static int of_gpiochip_scan_hogs(struct gpio_chip *chip)
 	return 0;
 }
 
+/* Linux compatibility helper: Get a GPIO descriptor from device tree */
+int gpiod_get(struct device_d *dev, const char *_con_id, enum gpiod_flags flags)
+{
+	struct device_node *np = dev->device_node;
+	enum of_gpio_flags of_flags;
+	const char *con_id = "gpios", *label = dev_name(dev);
+	char *buf = NULL;
+	int gpio;
+	int ret;
+
+	if (!IS_ENABLED(CONFIG_OFDEVICE) || !dev->device_node)
+		return -ENODEV;
+
+	if (_con_id) {
+		con_id = buf = basprintf("%s-gpios", _con_id);
+		if (!buf)
+			return -ENOMEM;
+	}
+
+	gpio = of_get_named_gpio_flags(np, con_id, 0, &of_flags);
+	free(buf);
+
+	if (!gpio_is_valid(gpio))
+		return gpio < 0 ? gpio : -EINVAL;
+
+	if (of_flags & OF_GPIO_ACTIVE_LOW)
+		flags |= GPIOF_ACTIVE_LOW;
+
+	buf = NULL;
+
+	if (_con_id) {
+		label = buf = basprintf("%s-%s", dev_name(dev), _con_id);
+		if (!label)
+			return -ENOMEM;
+	}
+
+	ret = gpio_request_one(gpio, flags, label);
+	free(buf);
+
+	return ret ?: gpio;
+}
+
 int gpiochip_add(struct gpio_chip *chip)
 {
 	int base, i;
diff --git a/include/gpiod.h b/include/gpiod.h
new file mode 100644
index 000000000000..c8b2cd47a3cb
--- /dev/null
+++ b/include/gpiod.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __GPIOD_H_
+#define __GPIOD_H_
+
+#include <gpio.h>
+#include <of_gpio.h>
+
+/**
+ * Optional flags that can be passed to one of gpiod_* to configure direction
+ * and output value. These values cannot be OR'd.
+ */
+enum gpiod_flags {
+	GPIOD_ASIS	= 0,
+	GPIOD_IN	= GPIOF_IN,
+	/*
+	 * To change this later to a different logic level (i.e. taking
+	 * active low into account), use gpio_direction_active()
+	 */
+	GPIOD_OUT_LOW	= GPIOF_OUT_INIT_INACTIVE,
+	GPIOD_OUT_HIGH	= GPIOF_OUT_INIT_ACTIVE,
+};
+
+/* returned gpio descriptor can be passed to any normal gpio_* function */
+int gpiod_get(struct device_d *dev, const char *_con_id, enum gpiod_flags flags);
+
+#endif
-- 
2.30.0


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox