mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Antony Pavlov <antonynpavlov@gmail.com>
To: barebox@lists.infradead.org
Cc: Ahmad Fatoum <a.fatoum@pengutronix.de>
Subject: [PATCH 9/9] RISC-V: add litex_linux_defconfig
Date: Wed,  5 May 2021 13:09:00 +0300	[thread overview]
Message-ID: <20210505100900.88141-10-antonynpavlov@gmail.com> (raw)
In-Reply-To: <20210505100900.88141-1-antonynpavlov@gmail.com>

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
---
 arch/riscv/configs/litex_linux_defconfig | 76 ++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/riscv/configs/litex_linux_defconfig b/arch/riscv/configs/litex_linux_defconfig
new file mode 100644
index 0000000000..ab53df1c78
--- /dev/null
+++ b/arch/riscv/configs/litex_linux_defconfig
@@ -0,0 +1,76 @@
+CONFIG_MACH_LITEX=y
+CONFIG_STACK_SIZE=0x20000
+CONFIG_MALLOC_SIZE=0xf00000
+CONFIG_MALLOC_TLSF=y
+CONFIG_PANIC_HANG=y
+CONFIG_BAUDRATE=1000000
+CONFIG_HUSH_FANCY_PROMPT=y
+CONFIG_CMDLINE_EDITING=y
+CONFIG_AUTO_COMPLETE=y
+# CONFIG_TIMESTAMP is not set
+CONFIG_BOOTM_SHOW_TYPE=y
+CONFIG_BOOTM_VERBOSE=y
+CONFIG_BOOTM_INITRD=y
+CONFIG_BOOTM_OFTREE=y
+CONFIG_BOOTM_OFTREE_UIMAGE=y
+CONFIG_DEFAULT_ENVIRONMENT_GENERIC_NEW=y
+CONFIG_DEBUG_LL=y
+CONFIG_LONGHELP=y
+CONFIG_CMD_IOMEM=y
+CONFIG_CMD_IMD=y
+CONFIG_CMD_MEMINFO=y
+CONFIG_CMD_GO=y
+CONFIG_CMD_LOADY=y
+CONFIG_CMD_EXPORT=y
+CONFIG_CMD_CMP=y
+CONFIG_CMD_MD5SUM=y
+CONFIG_CMD_SHA1SUM=y
+CONFIG_CMD_MSLEEP=y
+CONFIG_CMD_SLEEP=y
+CONFIG_CMD_DHCP=y
+CONFIG_CMD_MIITOOL=y
+CONFIG_CMD_PING=y
+CONFIG_CMD_TFTP=y
+CONFIG_CMD_ECHO_E=y
+CONFIG_CMD_EDIT=y
+CONFIG_CMD_MEMTEST=y
+CONFIG_CMD_MM=y
+CONFIG_CMD_CLK=y
+CONFIG_CMD_GPIO=y
+CONFIG_CMD_LED=y
+CONFIG_CMD_SPI=y
+CONFIG_CMD_LED_TRIGGER=y
+CONFIG_CMD_OF_DUMP=y
+CONFIG_CMD_TIME=y
+CONFIG_CMD_DHRYSTONE=y
+CONFIG_NET=y
+CONFIG_NET_NFS=y
+CONFIG_NET_NETCONSOLE=y
+CONFIG_DRIVER_NET_LITEETH=y
+CONFIG_AR8327N_PHY=y
+CONFIG_AT803X_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_DP83867_PHY=y
+CONFIG_LXT_PHY=y
+CONFIG_MARVELL_PHY=y
+CONFIG_MICREL_PHY=y
+CONFIG_NATIONAL_PHY=y
+CONFIG_REALTEK_PHY=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_DSA_MV88E6XXX=y
+CONFIG_DRIVER_SPI_LITEX_SPIFLASH=y
+CONFIG_MTD=y
+# CONFIG_MTD_OOB_DEVICE is not set
+CONFIG_MTD_M25P80=y
+CONFIG_CLOCKSOURCE_DUMMY_RATE=20000
+CONFIG_SRAM=y
+CONFIG_LED=y
+CONFIG_LED_GPIO=y
+CONFIG_LED_GPIO_OF=y
+CONFIG_LED_TRIGGERS=y
+CONFIG_GPIO_74XX_MMIO=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+# CONFIG_PINCTRL is not set
+CONFIG_FS_TFTP=y
+CONFIG_FS_NFS=y
+CONFIG_DIGEST_CRC32_GENERIC=y
-- 
2.31.1


_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


      parent reply	other threads:[~2021-05-05 10:11 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-05 10:08 [PATCH 0/9] RISC-V: add LiteX SoC support; resurrect nmon Antony Pavlov
2021-05-05 10:08 ` [PATCH 1/9] RISC-V: make it possible to run nmon from PBL C code Antony Pavlov
2021-05-05 10:27   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 2/9] RISC-V: boards: erizo: make it possible to use nmon Antony Pavlov
2021-05-05 10:28   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 3/9] serial: add litex UART driver Antony Pavlov
2021-05-05 10:32   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 4/9] gpio: add driver for 74xx-ICs with MMIO access Antony Pavlov
2021-05-05 10:35   ` Ahmad Fatoum
2021-05-05 10:08 ` [PATCH 5/9] spi: add litex spiflash driver Antony Pavlov
2021-05-05 10:39   ` Ahmad Fatoum
2021-05-05 15:10     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 6/9] net: add LiteEth driver Antony Pavlov
2021-05-06 10:10   ` Roland Hieber
2021-05-06 11:33     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 7/9] RISC-V: add initial LiteX SoC support Antony Pavlov
2021-05-05 10:16   ` Ahmad Fatoum
2021-05-05 10:45   ` Jan Lübbe
2021-05-05 15:23     ` Antony Pavlov
2021-05-05 10:08 ` [PATCH 8/9] RISC-V: add litex-linux board support Antony Pavlov
2021-05-05 10:19   ` Ahmad Fatoum
2021-05-05 10:36     ` Antony Pavlov
2021-05-05 10:09 ` Antony Pavlov [this message]

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210505100900.88141-10-antonynpavlov@gmail.com \
    --to=antonynpavlov@gmail.com \
    --cc=a.fatoum@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox