From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support
Date: Thu, 6 May 2021 11:29:01 +0200 [thread overview]
Message-ID: <20210506092901.25461-18-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20210506092901.25461-1-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
arch/arm/boards/phytec-som-imx6/board.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/arch/arm/boards/phytec-som-imx6/board.c b/arch/arm/boards/phytec-som-imx6/board.c
index 36c4d9a78b..1e515a093a 100644
--- a/arch/arm/boards/phytec-som-imx6/board.c
+++ b/arch/arm/boards/phytec-som-imx6/board.c
@@ -14,6 +14,7 @@
#include <gpio.h>
#include <init.h>
#include <of.h>
+#include <deep-probe.h>
#include <i2c/i2c.h>
#include <mach/bbu.h>
#include <platform_data/eth-fec.h>
@@ -110,6 +111,10 @@ static int phycore_da9062_setup_buck_mode(void)
if (!pmic_np)
return -ENODEV;
+ ret = of_device_ensure_probed(pmic_np);
+ if (ret)
+ return ret;
+
adapter = of_find_i2c_adapter_by_node(pmic_np->parent);
if (!adapter)
return -ENODEV;
@@ -161,6 +166,10 @@ static int physom_imx6_probe(struct device_d *dev)
unsigned flags = brd->flags;
if (flags & IS_PHYFLEX) {
+ ret = of_devices_ensure_probed_by_property("gpio-controller");
+ if (ret)
+ return ret;
+
phyflex_err006282_workaround();
pfla02_module_revision = get_module_rev();
@@ -358,3 +367,5 @@ static struct driver_d physom_imx6_driver = {
};
postcore_platform_driver(physom_imx6_driver);
+
+BAREBOX_DEEP_PROBE_ENABLE(physom_imx6_match);
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-05-06 9:30 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-05-06 9:28 [PATCH v5 00/17] barebox deep probe support Sascha Hauer
2021-05-06 9:28 ` [PATCH 01/17] imx53: remove unused imx53_add_nand Sascha Hauer
2021-05-06 9:28 ` [PATCH 02/17] of: platform: remove check of already added devices Sascha Hauer
2021-05-06 9:28 ` [PATCH 03/17] of: platform: Keep track of populated platform devices Sascha Hauer
2021-05-06 9:28 ` [PATCH 04/17] of: base: move memory init from DT to initcall Sascha Hauer
2021-05-06 9:28 ` [PATCH 05/17] of: base: move clock init from of_probe() to barebox_register_of() Sascha Hauer
2021-05-06 9:28 ` [PATCH 06/17] of: Set of_chosen and of_model earlier Sascha Hauer
2021-05-06 9:28 ` [PATCH 07/17] of: implement of_get_stdoutpath() Sascha Hauer
2021-05-06 9:28 ` [PATCH 08/17] initcall: add of_populate_initcall Sascha Hauer
2021-05-06 9:28 ` [PATCH 09/17] common: add initial barebox deep-probe support Sascha Hauer
2021-05-06 9:28 ` [PATCH 10/17] pinctrl: Find controller node first Sascha Hauer
2021-05-06 9:28 ` [PATCH 11/17] common: Explicitly probe consoles earlier with deep probe Sascha Hauer
2021-05-06 9:28 ` [PATCH 12/17] pinctrl: Add deep probe support Sascha Hauer
2021-05-06 9:28 ` [PATCH 13/17] ARM: i.MX: esdctl: add deep-probe support Sascha Hauer
2021-05-06 9:28 ` [PATCH 14/17] ARM: stm32mp: ddrctrl: " Sascha Hauer
2021-05-06 9:28 ` [PATCH 15/17] ARM: boards: mx6-sabrelite: " Sascha Hauer
2021-05-06 9:29 ` [PATCH 16/17] ARM: i.MX Phytec physom: convert to board driver Sascha Hauer
2021-05-06 9:29 ` Sascha Hauer [this message]
-- strict thread matches above, loose matches on Subject: below --
2021-04-16 9:49 [PATCH v4 00/17] barebox deep probe support Sascha Hauer
2021-04-16 9:49 ` [PATCH 17/17] ARM: i.MX Phytec physom: Add deep-probe support Sascha Hauer
2021-04-19 7:12 ` Ahmad Fatoum
2021-04-26 9:20 ` Marco Felsch
2021-04-26 9:26 ` Marco Felsch
2021-04-26 9:36 ` Ahmad Fatoum
2021-04-26 10:03 ` Marco Felsch
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210506092901.25461-18-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox