mail archive of the barebox mailing list
 help / color / mirror / Atom feed
From: Roland Hieber <rhi@pengutronix.de>
To: Marco Felsch <m.felsch@pengutronix.de>
Cc: barebox@lists.infradead.org
Subject: Re: [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support
Date: Sun, 9 May 2021 15:32:31 +0200	[thread overview]
Message-ID: <20210509133230.lcqn7bgitmr5axcg@pengutronix.de> (raw)
In-Reply-To: <20210506162616.11593-3-m.felsch@pengutronix.de>

On Thu, May 06, 2021 at 06:26:16PM +0200, Marco Felsch wrote:
> Since commit fa2d0aa96941 ("mmc: core: Allow setting slot index via
> device tree alias") the linux kernel supports stable mmc device names.
> Barebox has stable names since years so now we can connect both which
> allows us to pass 'root=mmcblkXpN' as argument for the cmdline. Note: it
> is crucial that the kernel device tree and the barebox device tree uses
> the same mmc aliases.
> 
> This patch adds the support to store the above cmdline as linux_rootarg
> if enabled. The partuuid is now used as fallback since it is not as
> unique as the mmcblkXpN scheme. It is added as build option since the
> system integrator needs to check if the used kernel contains the above
> commit.
> 
> Signed-off-by: Marco Felsch <m.felsch@pengutronix.de>
> ---
> v2:
> - improved Kconfig deps
> - improved Kconfig help message
> - minimal get_linux_mmcblkdev() simplifications
> 
>  common/Kconfig | 21 +++++++++++++++++++++
>  fs/fs.c        | 42 ++++++++++++++++++++++++++++++++++++++----
>  2 files changed, 59 insertions(+), 4 deletions(-)
> 
> diff --git a/common/Kconfig b/common/Kconfig
> index 6b3c1701be..5815ea06f0 100644
> --- a/common/Kconfig
> +++ b/common/Kconfig
> @@ -700,6 +700,27 @@ config FLEXIBLE_BOOTARGS
>  	  to replace parts of the bootargs string without reconstructing it
>  	  completely.
>  
> +config MMCBLKDEV_ROOTARG
> +	bool
> +	prompt "Support 'root=mmcblkXpN' cmdline appending"
> +	depends on FLEXIBLE_BOOTARGS
> +	depends on MCI
> +	depends on OFTREE
> +	help
> +	  Enable this option to append 'root=mmcblkXpN' to the cmdline instead
> +	  of 'root=PARTUUID=XYZ'. Don't enale this option if your used linux
> +	  kernel don't contain commit [1]. The first linux kernel release

Nit: s/enale/enable/; s/don't/doesn't/ (can probably fixed during git-am).

 - Roland

> +	  containing that commit is v5.10-rc1.
> +
> +	  The appending only happen if barebox 'linux.bootargs.bootm.appendroot'
> +	  variable is set or the used blspec entry contains 'linux-appendroot'.
> +
> +	  Note: It is crucial that the kernel device tree and the barebox device
> +	  tree uses the same mmc aliases.
> +
> +	  [1] fa2d0aa96941 ("mmc: core: Allow setting slot index via device tree
> +	      alias")
> +
>  config BAREBOX_UPDATE
>  	bool "In-system barebox update infrastructure"
>  
> diff --git a/fs/fs.c b/fs/fs.c
> index 881dc2fca0..91feee03e6 100644
> --- a/fs/fs.c
> +++ b/fs/fs.c
> @@ -2831,6 +2831,33 @@ out:
>  }
>  EXPORT_SYMBOL(chdir);
>  
> +static char *get_linux_mmcblkdev(struct fs_device_d *fsdev)
> +{
> +	struct cdev *cdevm, *cdev;
> +	int id, partnum;
> +
> +	cdevm = fsdev->cdev->master;
> +	id = of_alias_get_id(cdevm->device_node, "mmc");
> +	if (id < 0)
> +		return NULL;
> +
> +	partnum = 1; /* linux partitions are 1 based */
> +	list_for_each_entry(cdev, &cdevm->partitions, partition_entry) {
> +
> +		/*
> +		 * Partname is not guaranteed but this partition cdev is listed
> +		 * in the partitions list so we need to count it instead of
> +		 * skipping it.
> +		 */
> +		if (cdev->partname &&
> +		    !strcmp(cdev->partname, fsdev->cdev->partname))
> +			return basprintf("root=/dev/mmcblk%dp%d", id, partnum);
> +		partnum++;
> +	}
> +
> +	return NULL;
> +}
> +
>  /*
>   * Mount a device to a directory.
>   * We do this by registering a new device on which the filesystem
> @@ -2919,11 +2946,18 @@ int mount(const char *device, const char *fsname, const char *pathname,
>  
>  	fsdev->vfsmount.mnt_root = fsdev->sb.s_root;
>  
> -	if (!fsdev->linux_rootarg && fsdev->cdev && fsdev->cdev->partuuid[0] != 0) {
> -		char *str = basprintf("root=PARTUUID=%s",
> -					fsdev->cdev->partuuid);
> +	if (!fsdev->linux_rootarg && fsdev->cdev) {
> +		char *str = NULL;
> +
> +		if (IS_ENABLED(CONFIG_MMCBLKDEV_ROOTARG) &&
> +		    cdev_is_mci_main_part_dev(fsdev->cdev->master))
> +			str = get_linux_mmcblkdev(fsdev);
> +
> +		if (!str && fsdev->cdev->partuuid[0] != 0)
> +			str = basprintf("root=PARTUUID=%s", fsdev->cdev->partuuid);
>  
> -		fsdev_set_linux_rootarg(fsdev, str);
> +		if (str)
> +			fsdev_set_linux_rootarg(fsdev, str);
>  	}
>  
>  	path_put(&path);
> -- 
> 2.29.2
> 
> 
> _______________________________________________
> barebox mailing list
> barebox@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/barebox
> 

-- 
Roland Hieber, Pengutronix e.K.          | r.hieber@pengutronix.de     |
Steuerwalder Str. 21                     | https://www.pengutronix.de/ |
31137 Hildesheim, Germany                | Phone: +49-5121-206917-0    |
Amtsgericht Hildesheim, HRA 2686         | Fax:   +49-5121-206917-5555 |

_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox


  reply	other threads:[~2021-05-09 13:34 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-05-06 16:26 [PATCH v2 1/3] driver: add flag to check if cdev is an mci device Marco Felsch
2021-05-06 16:26 ` [PATCH v2 2/3] mci: mci-core: set the DEVFS_IS_MCI_MAIN_PART_DEV flag Marco Felsch
2021-05-06 16:26 ` [PATCH v2 3/3] fs: add linux_rootarg 'root=mmcblkXpN' support Marco Felsch
2021-05-09 13:32   ` Roland Hieber [this message]
2021-05-10 10:26     ` Marco Felsch

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20210509133230.lcqn7bgitmr5axcg@pengutronix.de \
    --to=rhi@pengutronix.de \
    --cc=barebox@lists.infradead.org \
    --cc=m.felsch@pengutronix.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox