From: Sascha Hauer <s.hauer@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH 22/24] regmap: Add regmap_read_poll_timeout
Date: Wed, 2 Jun 2021 11:55:05 +0200 [thread overview]
Message-ID: <20210602095507.24609-23-s.hauer@pengutronix.de> (raw)
In-Reply-To: <20210602095507.24609-1-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
include/regmap.h | 24 ++++++++++++++++++++++++
1 file changed, 24 insertions(+)
diff --git a/include/regmap.h b/include/regmap.h
index b43cd936fa..057370afc7 100644
--- a/include/regmap.h
+++ b/include/regmap.h
@@ -116,4 +116,28 @@ int regmap_write_bits(struct regmap *map, unsigned int reg,
int regmap_update_bits(struct regmap *map, unsigned int reg,
unsigned int mask, unsigned int val);
+/**
+ * regmap_read_poll_timeout - Poll until a condition is met or a timeout occurs
+ *
+ * @map: Regmap to read from
+ * @addr: Address to poll
+ * @val: Unsigned integer variable to read the value into
+ * @cond: Break condition (usually involving @val)
+ * @timeout_us: Timeout in us, 0 means never timeout
+ *
+ * Returns 0 on success and -ETIMEDOUT upon a timeout or the regmap_read
+ * error return value in case of a error read. In the two former cases,
+ * the last read value at @addr is stored in @val. Must not be called
+ * from atomic context if sleep_us or timeout_us are used.
+ *
+ * This is modelled after the readx_poll_timeout macros in linux/iopoll.h.
+ */
+#define regmap_read_poll_timeout(map, addr, val, cond, timeout_us) \
+({ \
+ int __ret, __tmp; \
+ __tmp = read_poll_timeout(regmap_read, __ret, __ret || (cond), \
+ timeout_us, (map), (addr), &(val)); \
+ __ret ?: __tmp; \
+})
+
#endif /* __REGMAP_H */
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
next prev parent reply other threads:[~2021-06-02 10:01 UTC|newest]
Thread overview: 34+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-02 9:54 [PATCH v2 00/24] clk updates Sascha Hauer
2021-06-02 9:54 ` [PATCH 01/24] clk: clk-mux: Fix handling of CLK_MUX_HIWORD_MASK Sascha Hauer
2021-06-02 15:18 ` Ahmad Fatoum
2021-06-02 9:54 ` [PATCH 02/24] clk: introduce clk init op Sascha Hauer
2021-06-02 9:54 ` [PATCH 03/24] clk: rename clk_register() to bclk_register() Sascha Hauer
2021-06-02 9:54 ` [PATCH 04/24] clk: introduce struct clk_hw Sascha Hauer
2021-06-11 7:55 ` Ahmad Fatoum
2021-06-11 8:41 ` Sascha Hauer
2021-06-11 9:19 ` Ahmad Fatoum
2021-06-11 11:46 ` Sascha Hauer
2021-06-11 12:14 ` Ahmad Fatoum
2021-06-02 9:54 ` [PATCH 05/24] clk: introduce clk_register() Sascha Hauer
2021-06-02 9:54 ` [PATCH 06/24] clk: divider: Make clk_divider_ops const Sascha Hauer
2021-06-02 9:54 ` [PATCH 07/24] clk: divider: Add ro ops Sascha Hauer
2021-06-02 9:54 ` [PATCH 08/24] clk: divider: Make clk_mux_ops const Sascha Hauer
2021-06-02 9:54 ` [PATCH 09/24] clk: mux: Add ro ops Sascha Hauer
2021-06-02 9:54 ` [PATCH 10/24] clk: move fixed_factor to include/linux/clk.h Sascha Hauer
2021-06-02 9:54 ` [PATCH 11/24] Add rational_best_approximation() Sascha Hauer
2021-06-02 18:25 ` Trent Piepho
2021-06-07 11:22 ` Sascha Hauer
2021-06-02 9:54 ` [PATCH 12/24] clk: Update fractional divider from Linux Sascha Hauer
2021-06-02 9:54 ` [PATCH 13/24] clk: Add lock to different clock types Sascha Hauer
2021-06-02 9:54 ` [PATCH 14/24] clk: Add Linux functions to register a divider Sascha Hauer
2021-06-02 9:54 ` [PATCH 15/24] clk: Add Linux functions to register a fixed factor clock Sascha Hauer
2021-06-02 9:54 ` [PATCH 16/24] clk: Add Linux functions to register a gate Sascha Hauer
2021-06-02 9:55 ` [PATCH 17/24] clk: Add Linux functions to register a mux Sascha Hauer
2021-06-02 9:55 ` [PATCH 18/24] clk: Add CLK_GET_RATE_NOCACHE Sascha Hauer
2021-06-02 9:55 ` [PATCH 19/24] clk: Rename CLK_GATE_INVERTED to CLK_GATE_SET_TO_DISABLE Sascha Hauer
2021-06-02 9:55 ` [PATCH 20/24] clk: implement CLK_SET_RATE_UNGATE Sascha Hauer
2021-06-02 9:55 ` [PATCH 21/24] clk: implement set/get phase Sascha Hauer
2021-06-02 9:55 ` Sascha Hauer [this message]
2021-06-02 9:55 ` [PATCH 23/24] clk: rockchip: Update to current Linux Sascha Hauer
2021-06-02 9:55 ` [PATCH 24/24] clk: Rockchip: Add rk3568 clk support Sascha Hauer
2021-06-09 9:18 ` Ahmad Fatoum
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210602095507.24609-23-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox