From: Sascha Hauer <s.hauer@pengutronix.de> To: Barebox List <barebox@lists.infradead.org> Subject: [PATCH] mci: dw_mmc: set dma mask to work correctly on 64bit platforms Date: Thu, 10 Jun 2021 15:10:32 +0200 [thread overview] Message-ID: <20210610131032.6645-1-s.hauer@pengutronix.de> (raw) The variant we support currently can only do 32bit DMA. Adjust dma mask accordingly. Also use dma_map_single() rather than dma_sync_single() to actually get errors when the mapping fails. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> --- drivers/mci/dw_mmc.c | 53 ++++++++++++++++++++++++++------------------ 1 file changed, 31 insertions(+), 22 deletions(-) diff --git a/drivers/mci/dw_mmc.c b/drivers/mci/dw_mmc.c index 7979568841..139193ccf5 100644 --- a/drivers/mci/dw_mmc.c +++ b/drivers/mci/dw_mmc.c @@ -25,6 +25,7 @@ struct dwmci_host { struct mci_host mci; + struct device_d *dev; struct clk *clk_biu, *clk_ciu; void *ioaddr; unsigned int fifo_size_bytes; @@ -34,6 +35,7 @@ struct dwmci_host { int ciu_div; u32 fifoth_val; u32 pwren_value; + dma_addr_t idmac_dma; }; struct dwmci_idmac { @@ -110,12 +112,12 @@ static int dwmci_prepare_data_pio(struct dwmci_host *host, } static int dwmci_prepare_data_dma(struct dwmci_host *host, - struct mci_data *data) + struct mci_data *data, dma_addr_t dma) { unsigned long ctrl; unsigned int i = 0, flags, cnt, blk_cnt; - unsigned start_addr; struct dwmci_idmac *desc = host->idmac; + dma_addr_t desc_dma = host->idmac_dma; blk_cnt = data->blocks; @@ -124,12 +126,7 @@ static int dwmci_prepare_data_dma(struct dwmci_host *host, dwmci_wait_reset(host, DWMCI_CTRL_FIFO_RESET); - dwmci_writel(host, DWMCI_DBADDR, (uint32_t)desc); - - if (data->flags & MMC_DATA_READ) - start_addr = (uint32_t)data->dest; - else - start_addr = (uint32_t)data->src; + dwmci_writel(host, DWMCI_DBADDR, desc_dma); do { flags = DWMCI_IDMAC_OWN | DWMCI_IDMAC_CH; @@ -142,10 +139,12 @@ static int dwmci_prepare_data_dma(struct dwmci_host *host, cnt = data->blocksize * 8; } + desc_dma += sizeof(*desc); + desc->flags = flags; desc->cnt = cnt; - desc->addr = start_addr + (i * PAGE_SIZE); - desc->next_addr = (uint32_t)(desc + 1); + desc->addr = dma + (i * PAGE_SIZE); + desc->next_addr = desc_dma; dev_dbg(host->mci.hw_dev, "desc@ 0x%p 0x%08x 0x%08x 0x%08x 0x%08x\n", desc, flags, cnt, desc->addr, desc->next_addr); @@ -172,12 +171,12 @@ static int dwmci_prepare_data_dma(struct dwmci_host *host, } static int dwmci_prepare_data(struct dwmci_host *host, - struct mci_data *data) + struct mci_data *data, dma_addr_t dma) { if (dwmci_use_pio(host)) return dwmci_prepare_data_pio(host, data); else - return dwmci_prepare_data_dma(host, data); + return dwmci_prepare_data_dma(host, data, dma); } static int dwmci_set_transfer_mode(struct dwmci_host *host, @@ -272,6 +271,7 @@ dwmci_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data) uint64_t start; int ret; unsigned int num_bytes = 0; + dma_addr_t dma = 0; start = get_time_ns(); while (1) { @@ -287,16 +287,20 @@ dwmci_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data) dwmci_writel(host, DWMCI_RINTSTS, DWMCI_INTMSK_ALL); if (data) { + num_bytes = data->blocks * data->blocksize; if (data->flags & MMC_DATA_WRITE) - dma_sync_single_for_device((unsigned long)data->src, - num_bytes, DMA_TO_DEVICE); + dma = dma_map_single(host->dev, (void *)data->src, num_bytes, + DMA_TO_DEVICE); else - dma_sync_single_for_device((unsigned long)data->dest, - num_bytes, DMA_FROM_DEVICE); + dma = dma_map_single(host->dev, data->dest, num_bytes, + DMA_FROM_DEVICE); - ret = dwmci_prepare_data(host, data); + if (dma_mapping_error(host->dev, dma)) + return -EFAULT; + + ret = dwmci_prepare_data(host, data, dma); if (ret) return ret; } @@ -400,11 +404,11 @@ dwmci_cmd(struct mci_host *mci, struct mci_cmd *cmd, struct mci_data *data) dwmci_writel(host, DWMCI_CTRL, ctrl); if (data->flags & MMC_DATA_WRITE) - dma_sync_single_for_cpu((unsigned long)data->src, - num_bytes, DMA_TO_DEVICE); + dma_unmap_single(host->dev, dma, num_bytes, + DMA_TO_DEVICE); else - dma_sync_single_for_cpu((unsigned long)data->dest, - num_bytes, DMA_FROM_DEVICE); + dma_unmap_single(host->dev, dma, num_bytes, + DMA_FROM_DEVICE); } } @@ -550,6 +554,9 @@ static int dw_mmc_probe(struct device_d *dev) host = xzalloc(sizeof(*host)); + dma_set_mask(dev, DMA_BIT_MASK(32)); + host->dev = dev; + host->clk_biu = clk_get(dev, "biu"); if (IS_ERR(host->clk_biu)) return PTR_ERR(host->clk_biu); @@ -567,7 +574,9 @@ static int dw_mmc_probe(struct device_d *dev) host->ioaddr = IOMEM(iores->start); host->idmac = dma_alloc_coherent(sizeof(*host->idmac) * DW_MMC_NUM_IDMACS, - DMA_ADDRESS_BROKEN); + &host->idmac_dma); + if (!host->idmac) + return PTR_ERR(-ENOMEM); host->mci.send_cmd = dwmci_cmd; host->mci.set_ios = dwmci_set_ios; -- 2.29.2 _______________________________________________ barebox mailing list barebox@lists.infradead.org http://lists.infradead.org/mailman/listinfo/barebox
next reply other threads:[~2021-06-10 13:12 UTC|newest] Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top 2021-06-10 13:10 Sascha Hauer [this message] 2021-06-11 8:23 ` Ahmad Fatoum 2021-06-11 10:02 ` Sascha Hauer 2021-06-11 10:40 ` Ahmad Fatoum 2021-06-11 8:26 ` Ahmad Fatoum
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20210610131032.6645-1-s.hauer@pengutronix.de \ --to=s.hauer@pengutronix.de \ --cc=barebox@lists.infradead.org \ --subject='Re: [PATCH] mci: dw_mmc: set dma mask to work correctly on 64bit platforms' \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: link
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox