From: Steffen Trumtrar <s.trumtrar@pengutronix.de>
To: Barebox List <barebox@lists.infradead.org>
Subject: [PATCH v4 10/10] firmware: add support for compressed images
Date: Wed, 16 Jun 2021 08:32:46 +0200 [thread overview]
Message-ID: <20210616063246.14900-10-s.trumtrar@pengutronix.de> (raw)
In-Reply-To: <20210616063246.14900-1-s.trumtrar@pengutronix.de>
At least bitstreams for FPGAs can consist of a lot of zeros depending on
device utilization. These bitstreams can be compressed very effectively.
Let the firmware code accept these images and decompress them before
handing it to the firmware-manager in question.
Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
---
v3->v4: fix printf warning %s -> %d
v2->v3 - better error handling
- fix free'ing and close'ing
- remove O_CREAT for devicefd. Destination is always a device
that shall be written with a firmware (FPGA etc). If it doesn't
exist, creating it is useless.
---
common/firmware.c | 52 +++++++++++++++++++++++++++++++++++++++++++----
1 file changed, 48 insertions(+), 4 deletions(-)
diff --git a/common/firmware.c b/common/firmware.c
index 58509d5da615..1d34090f0100 100644
--- a/common/firmware.c
+++ b/common/firmware.c
@@ -14,6 +14,8 @@
#include <linux/list.h>
#include <linux/stat.h>
#include <linux/err.h>
+#include <uncompress.h>
+#include <filetype.h>
#define BUFSIZ 4096
@@ -211,12 +213,54 @@ int firmwaremgr_register(struct firmware_handler *fh)
*/
int firmwaremgr_load_file(struct firmware_mgr *mgr, const char *firmware)
{
- int ret;
- char *name = basprintf("/dev/%s", mgr->handler->id);
+ char *dst;
+ enum filetype type;
+ int ret = 0;
+ int firmwarefd = 0;
+ int devicefd = 0;
+
+ if (!firmware)
+ return -EINVAL;
+
+ if (!mgr->handler->id) {
+ pr_err("id not defined for handler\n");
+ return -ENODEV;
+ }
+
+ dst = basprintf("/dev/%s", mgr->handler->id);
+
+ type = file_name_detect_type(firmware);
+
+ if (type == filetype_unknown) {
+ ret = copy_file(firmware, dst, 0);
+ } else {
+ firmwarefd = open(firmware, O_RDONLY);
+ if (firmwarefd < 0) {
+ printf("could not open %d: %s\n", firmwarefd,
+ errno_str());
+ ret = firmwarefd;
+ goto out;
+ }
- ret = copy_file(firmware, name, 0);
+ devicefd = open(dst, O_WRONLY);
+
+ if (devicefd < 0) {
+ printf("could not open %s: %s\n", dst, errno_str());
+ ret = devicefd;
+ goto out;
+ }
+
+ ret = uncompress_fd_to_fd(firmwarefd, devicefd,
+ uncompress_err_stdout);
+ }
+
+out:
+ free(dst);
- free(name);
+ if (firmwarefd > 0)
+ close(firmwarefd);
+ if (devicefd > 0)
+ close(devicefd);
return ret;
}
--
2.29.2
_______________________________________________
barebox mailing list
barebox@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/barebox
prev parent reply other threads:[~2021-06-16 6:34 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-06-16 6:32 [PATCH v4 01/10] reset: add of_reset_control_get to header Steffen Trumtrar
2021-06-16 6:32 ` [PATCH v4 02/10] drivers: add fpga bridge framework Steffen Trumtrar
2021-06-16 6:32 ` [PATCH v4 03/10] drivers: fpga: add socfpga bridges Steffen Trumtrar
2021-06-16 6:32 ` [PATCH v4 04/10] firmware: socfpga: change function prefixes Steffen Trumtrar
2021-06-16 6:32 ` [PATCH v4 05/10] firmware: import fpga-mgr.h from linux Steffen Trumtrar
2021-06-16 6:32 ` [PATCH v4 06/10] of: kconfig: of_overlay uses firmwaremgr_load_file Steffen Trumtrar
2021-06-16 6:32 ` [PATCH v4 07/10] of: of_firmware: add support for fpga bridges Steffen Trumtrar
2021-06-18 8:32 ` Steffen Trumtrar
2021-06-21 8:01 ` Sascha Hauer
2021-06-16 6:32 ` [PATCH v4 08/10] commands: firmwareload: allow loading firmware from dt Steffen Trumtrar
2021-06-22 9:08 ` Sascha Hauer
2021-06-16 6:32 ` [PATCH v4 09/10] drivers: firmware: socfpga: remove bridges shutdown Steffen Trumtrar
2021-06-16 6:32 ` Steffen Trumtrar [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20210616063246.14900-10-s.trumtrar@pengutronix.de \
--to=s.trumtrar@pengutronix.de \
--cc=barebox@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox